Changing line colour of Webhelp

hello again helpful peeps,
Just trying to change the colour of some lines in the webhelp. I have succesfully changed one of the lines (see diagram below) using the brilliant "Skinny on Skins" help, but now also need to change the one above it. Is it possible?
Thanks!

you need to edit the output of webhelp,
Go to the webhelp output folder and open the file whskin_mbars.htm in notepad.
search for <body tag and add the following style
style="border-top: 1px solid red;"
in case you want to make the border top as red color or make it any color you want.
thanks
Praful

Similar Messages

Newby question. Trying to fill a section but using fill and/or stroke only changes line colour

Hi,
Been trying to work this out for hours now so if anyone can help I will be forever thankful!
Basically, I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the colour of the line.
I'm not sure if that makes sense or if anyone can help based on that but I can post pictures or something if that would help?
I also understand that the magic want thing might be where I've went wrong at the very start maybe?
Thanks for any help at all!

I don't know if that helps you understand at all?
For example I want to fill the inside of the square but when I'm hitting the fill and stroke buttons they're just changing the colour of the line.
I think I might just start from scratch again! Don't know where I've went wrong.

Change the colour of the outer line of a circle

Hello everyone,
I drew up a circle with no fill inside, to show where the location of my highway storm culvert will be.
I changed the thickness of the outer line of my circle shape by creating a stroke effect at layer → blending options → stroke; then I changed the thickness of the line by right clicking in stroke at the layers panel and then choosing "scale effect."
But the problem I have is that the outer line is gray, and I want it to be black.
The outer line was originally red though so I changed my image → mode to grayscale, because I couldn't find a way to change the colour while keeping my image in RGB colour. So I've managed to make the outer line gray by changing the image mode but I still can't change the colour of the outer line to black.
I'm sure there must be other ways of changing the outer line colour without having to change the image mode, but I'm clueless.
Here is my drawing:
The text next to the circle says «Obra de desagüe». That's spanish for "drainage construction site."
You see, I can't change the colour because I have no clue at where the "change colour option" is. I tried going to layer → layer properties, but in there there's only 7 colours to choose from. I chose a random colour, just to see what happens and what truly changed colour was the layer, within the layers panel; not the shape contained within the layer.
So I'm lost here, any help please?
Unfortunately I'm still not an expert in Photoshop just yet.
Thank you for reading my post.

Set shape layer opacity 100% Fill 0% to make fill transparent or add an empty layer make a circular selection stroke it black.

Change the colour of lines in the same string indicator.

Hi everybody,
I'm getting crazy, because I'm looking for the way to change the colour of
the lines I want in the same string indicator.
I'm doing an application to control an instrument by serial port, and I'm
concatenating the lines that this instrument gives me, but there is some
line that I would want to change its colour, because there has been an alarm,
for instance. And I only can change all the string.
Is there any way to do this? I don't know.
Could you please help me?

Thank You Very Much.
The fourth step is a little bit difficult to understand, but what I've done
is all the three first steps, and in the fourth one I've made an array (I32)
of the lines that I don't want to highlight and connect it to Disabled �tems.
Do you think this is a good solution?
Thank you again for your help. I really needed someone to help me, because
if not I would still be with the STRING INDICATOR.
Timothy John Streeter wrote:
>Hi Carlos>>I'm sorry for being too brief with the last email.>>1) Place
an 'Multiple Selection Listbox' on your front panel.>>2) Create an attribute
node. Make the attribute 'Item Names'.>>3) Put every completed line into
the last element of an array, and then pass the array
>to the attibute node. (This build the list>of strings in the Listbox).>>4)
To highlight a line, make an array containing the line numbers (I32) that
you want
>highlighted and pass it the terminal of the>Listbox.>>Hope this is more
helpful>>Tim>>Carlos Jorge wrote>> Thank you for your help, but I don't
understand what you have told me. What>> I have to pass to the indicator
node, and what is this indicator node? My>> problem now is the last thing
I have to do.>>>> Could you please explain my doubt with more detail?>>>>
Thank you a lot.>> Timothy John Streeter wrote>
>Hi Carlos>>Try using a 'Multiple Selection List Box' indicator instead of>>
a string indicator. You>> >can highlight a line by adding the line>number
to an array and pass it to>> the indicator node.>>Tim>>Carlos Jorge Granadino
wrote>> Hi everybody,>>>>>> I'm getting crazy, because I'm looking for
the way to change the colour of>>>> the lines I want in the same string indicator.>>
I'm doing an application>> to control an instrument by serial port, and I'm>>
concatenating the lines>> that this instrument gives me, but there is some>>
line that I would want>> to change its colour, because there has been an
alarm,>> for instance. And>> I only can change all the string.>> Is there
any way to do this? I don't>> know.>>>> Could you please help me?>>

How do you change the click box properties (line colour and width) in Captivate 7.0?

How do you change the click box properties (line colour and width) in Captivate 7.0?

Yes certainly, we can do that, insert a smart shape and use it as a button, then go to the properties pane, change the Alpha to 0, that will make it transparent, and add the stroke color as red and increase the width.
In case of a button, you have to select button type as transparent and do the same.
Thanks.

How to make this image compatible as a laser cut file by changing stroke colour?

My final aim with this image is to make it compatible as a laser cut raster engrave design, so the laser cutter will fill the black areas or white (either would be fine). If this is not possible then even as a laser cut outline would be suitable
This is how the image will look when in Illustrator. however when I use the preview screen (ctrl+y) it creates an outline. This is how the laser cutter will read the image which is why it is very important the preview image is is what i would expect the final outcome to be.
As a raster the laser cutter requires the stroke line to be blue r:0 g:0 B:255. Currently I cannot edit the colour, yet I can change the stroke weight. Also how I would I fill the engraved areas as a stroke? At the moment when I try converting the stroke to blue it turns grey.
I am also unsure as to how I would make this feasible even to be cut out when I cannot change the stroke colour to red. This is required for laser cut designs as the laser cutter reads red lines to be cut.
I can usually change stroke colours easily so I assume this is due to the fact that I have brought this file through from Photoshop so it is not yet fullu editable. I have used the live trace and live paint function in illustrator so far.
Any help would be appreciated

You need to expand the artwork and convert the strokes to genuine outlines to in turn be able to apply anotehr thin stroke to them again...
Mylenium

To change the colour of a section, but leave the rest as it is

Is this possible? I need to change a colour of a moving object, but keep everything else as it is, are there any ways of doing this on FCP? If advice is in colour, please give detailed instructions as I have it, but am yet to use it.
Many thanks
Martin

It's interesting to see this post this morning, as I have just this minute been trying to resolve this issue. I'm also a beginner with Color.
1) The essence of the capability is the 'keying' of chroma. You can pick a point (with the eye-dropper in secondaries) and the computer will select every point that has the same chroma values (digital values which represent Blue, Red, Green, and the Luma (black and white)). You can pick several points, and all chromas that you choose will be selected as singular a range. To the top right of the secondaries screen, the chroma value (values) you selected are displayed on range bars. You can then readjust the range using the bars. The eye-dropper gives you a rough estimate of the chroma you want to select, but the range bars help you hone-in on the precise chroma range you are seeking to change. Each chroma bar has three different adjustable values...the middle white line which can be moved left and right, and two other lines which effect the range of hue and saturation.
2) Once the chroma is 'keyed' (selected), you can change it as it appears throughout the shot you are working on. You can change the hue (the color itself) or the saturation (the intensity). You can open another secondaries tab to do this process again for another color.
3) Masking in the geometries tab is where you choose only part of the image to apply your corrections. You can choose to key and correct 'outside' of the selected shape or 'inside' the selected shape.
Those are the important details which I found under-emphasized in the instruction links that the real editors on this forum have posted in recent threads.
Please don't click 'helpful' as I would rather have no points than 5 or 10 points.

How to I change the colour (or hightlight) some of the bars in a bar chart in Keynote?

I am using Keynote 6.2.2. I have prepared a chart which displays the quarterly income (as a points on a line) and expenditure (as bars) for the past 3 years. I wish to highlight the Q1 expenditure bars for comparison reasons. At the moment all the bars are coloured red (and the income lines, blue). How can I either change the colours of just the Q1 expenditure bars for each year?

You need to change to; plot columns:
select the chart
click the Edit Chart Data button
click the plot columns button (arrowed)
select the chart then select the individual bars to be changed:

How do I change the colour of the navigation button icons?

I was wondering if there are any add-ons or mods for Firefox 25 that would allow me to change the colour of the icons on the navigation buttons.
I'm thinking along the lines of the older style where the back and forward buttons would light up green, reload in blue, stop in red, and home with a white/yellow mix, when they are clickable.
I find with Firefox 25, I get light gray when grayed out, and dark gray when active, which I find is a bit difficult to tell at a glance. I prefer the colour-coded buttons, and was hoping there was an add-on that would allow me to change that in Firefox 25.

Sorry, not getting the second image showing up, even though I uploaded both.
Firefox 25 toolbar image below:

Changing Pixel Colours

Hi,
Is there a way of changing pixel colours in (say) a Graphics (or image) object? I want to be able to create a Graphics object, and then change pixel colours, as determined by the results of a numerical simulation, as results are generated.
Any help appreciated!

You can use the drawLine to draw a one-pixel line in the right place.
Alternatively (and probably better) use an int array to contain your image data and use a MemoryImageSource to generate an Image for display from that.

Changing the colours on multicomponent XY graphs.

Hello,
I know this should be easy and I even looked at the XY graph example that Labview offers. However, I am not having much success when I try to change the colours of two datasets plotted on the *same* XY graph. I've placed two VI's here that I have been working on. The first (graph.vi) plots the two datasets but I can only get one colour. In the second VI (graph2.vi) I can change the colours of each dataset but if the program is run continuously it hangs. Can anyone have a look at these and correct me on my mistake(s)?
Thanks!
Attachments:
graph.vi ‏36 KB
graph1.vi ‏46 KB

Dear Remington,
I'm not sure what you wanted with your code and which your question is related with the VIs.
1. You mentioned a graph2.vi, but there is a graph.vi and a graph1.vi which are nearly the same.
2. I will describe what you have programmed. You have an outer while loop running until you abort the VI. This while loop contains a "left" while loop and a "right" while loop. The "left" while loop runs only once generating 4 random numbers. The autoindexing gives you 4 arrays existing of one element each. Two of them were bundled togther giving one plot consisting of one point. These two plots were given to the "right" while loop. In the loop you add them to an existing array coming from the shift register. The output and there the sh
ift registers contains an array of plots which is a valid data type for a multi plot xy-graph. After the first iteration you have an array of two elements each representing a plot. In the next iteration you will add 2 new plots so you have 4 plots to print, next iteration 2 new plots so 6 to print and so on. Your program dosen't hang. You have defined a point style only for the first two plots. since each plot is only one point long the graph could not draw any line so the other plots will not be seen.
3. I have changed your VI so it will add a new point to the two plots on each iteration of the outer most loop.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions
Attachments:
graphnew.vi ‏42 KB

Changing text colour affecting more than one text box

I am creating a word cloud in a shape as a design.
I want to use only 3 colours for the words randomly. Each word is in a seperate text box
I am finding however that when I change the colour of one word it automatically changes a few? I cant work out why?

What I've done in the past is
Find out how many characters per line.
Setup character style called VarLine 1, VarLine 2, VarLine 3 etc.
Set up a paragraph style for your text.
Go to the nested style.
VarLine 1 up to # characters
VarLine 2 up to # characters
VarLine 3 up to # characters
etc.
Set up your Variables for
Line 1
Line 2
Line 3
Then set each one to pick up the appropriate VarLine character style.
This works to a certain extent, it will need tweaking, as each application is different. I'm not sure if it will work in your case, but you never know.

Changing the colours in a logo

A client of mine has supplied me with a logo, but asked if I
can change its colours to fit in with a new website design.
I've managed to change most of it OK where solid colour is
used, but not sure how to easily change the colours on the edges to
soften them.
I've posted the logo here to show what I mean. The darker
colour on the right is pretty much OK, but the orange edges are
particularly bad.
Any pointers or help with this would be much appreciated.
link
here

pixlor wrote:
> Expression 3 evolved into Microsoft Expression Design 4
and it's a decent
> vector editing program. Not as powerful as Illustrator,
but it had natural
> media strokes and transparency in the 90s when
Expression 1 was released as the
> vector-based companion to Painter by Fractal Design.
>
> Expression has two pens. I used the standard pen,
because it's easier for
> tracing shapes. (I don't think the Fireworks pen is a
Bezier pen, eitehr, as
> the nodes are on the shape itself.) Each shape in the
file I made is 21
> points:seven node points and 14 handle points. The
relationship of the handles
> can be set one of four ways. Individual nodes can be
selected and modified or
> multiple nodes can be selected and modified. It's really
quite straightforward
> to use.
>
> I've played with Illustrator some, but I know Expression
better. I've also
> played with Inkscape and Freehand a very tiny bit. When
I tried the pen in
> Fireworks earlier today, it didn't act as I expected. I
went to move a node
> slightly and suddenly I had extra points where I didn't
want them and a big arc
> that messed up the line I'd started. No other program
I've used has
ever
> done that. So I gave up!
>
> But, to be more fair, I gave it another try. I don't see
a tool that allows me
> to change a corner node into a node with handles, so
that I can create a curved
> line. Hmm...the Help files say to select the object,
click on a corner point
> with the pen tool and drag out handles. That works, but
then I get new points
> added to the shape starting from my last point. That's
frustrating. Because the
> tool is overloaded with functions, the program doesn't
have any way of knowing
> what it is I want it to do, I guess. And, I don't get
the result I want,
> either. It's a shame that Fireworks does not have a
specific tool for node
> conversion. Illustrator has one. I think Expression's
drawing tools are closer
> to Illustrator's then Fireworks's are.
>
>
> I think i'll stick with Expression and export .ai files!
>
Use the Subselection tool for altering control points in an
FW vector.
To extend the control arms for a control point, click k the
point with
the Pen tool and drag away from the point. You should not get
additional
points on the path by doing this.
In FW CS4, the Path panel gives you a lot of control over
vector points
and paths. It's worth checking out.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
See my work on Flickr
http://www.flickr.com/photos/jim_babbage/

Change the colour of events in iCal

I need to change the colour of events/appointments in the Mac iCal. I have imported all of my Outlook calendar via google sync and all my appointments are now just one colour. I have my medical appointments coloured in orange so they stand out each week (I have many) and all my personal events a different colour, and my volunteer work a different colour so that I can see at a glance in week view what I am up to. Looking at one week with every appointment in one drab colour is not nice.
I notice that different calendars are different colours, but I dont want separate calendars as I need to sync with google to share the calendar with Android phone and iPad.
Please can you let me know how to turn this feature on. Many thanks.

Click calendars at the bottom of the page the click on the i symbol for info and then you can select the colour you'd like.

Printing of changed line item in scheduling agreement smart form.

Hi experts,
I am facing problem in printing of changed line item in schedule agreement.
can any body tell me how to find the line item has been changed through programming?what is the procedure to fetch the data for new line item.its
very urgent for me.
Please help me in this regard.
Priti Shrivastava

Hi
with the help of T180-TRTYP field you know if that doc has been changed or created.
If it is not equal to H it is changed. H means created.
pass the TCODE of Sched Agreement and check this field.
You can use the CDHDR and CDPOS table s to get the changed values of new item.
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Changing line colour of Webhelp

Similar Messages

Maybe you are looking for