Changing Listen Port

We have a Corporate firewall that will not allow Port 7777. We have developers that need access to HTMLDB remotely via VPN, and I need to know how they can log in to HTMLDB.
Does HTMLDB default to whatever Ports the Apache Webserver is configured to listen in httpd.conf ??
How can we change the config for httpd/htmldb to allow remote access via Firewall allowed ports?

Just change this in your Apache httpd.conf
# Port: The port to which the standalone server listens. For
# ports < 1024, you will need httpd to be run as root initially.
# This port is used when starting without SSL
Port 7777
Listen 7777

Similar Messages

Changing listening port for JBoss

Can anyone point out where to look for in order to change the listening port for JBoss. By defualt it takes 8080, I want to change that to some other number.
I have been looking into the folders but it seems a lot of them and hard to find the exact file to change, need some help here.
Thanks

Follow the bouncing link and remember Google is your friend.
http://www.google.com/search?hl=en&q=JBoss+%2B+changing+the+default+port
PS.

Changing listening port for SSH on IDS

What command would I use to change the listening port on a 4200 series IDS? I have it listening on another port, and when I applied the S189/S190 update, it changed SSH back to port 22.
Just out of curiosity too, does anyone know what else the S189/S190 updates change?
Thanks,
Jim

After looking around, I think it may be the /etc/ssh/sshd_config file that needs to be modified. However, I wanted to double check that with the community. If I modify that file and restart ssh, will I mess anything up and lock myself out of remote access?
Thanks!!

Change listening port 8080

Oracle 9i grabs port 8080. Where can I configure that to something else?
thanks
Mike
[email protected]

Hi Mike,
Please Refer to the section Configuring Oracle XML DB with Enterprise Manager: Chapter 21 from the book
XML Database Developers Guide - Oracle XML DB
Thanks,
Chinta
Oracle 9i grabs port 8080. Where can I configure that to something else?
thanks
Mike
[email protected]

RDP listening port needs to be changed on one client PC - can't connect via Anywhere Access

We have a setup with Server 2012 Essentials and 10 workstations. We have setup Anywhere Access and is working fine. We have one system (Windows 7 Pro) on the network running AADS Server (use to be called XP Unlimited). This allows several users to logon
to that PC remotely at once as well as someone local using it. This PC needs to be changed from the default 3389 port due to the new AADS Server version requiring it. When ever we change the listening port we cannot remote desktop into this PC. It is available
in Remote Web Access Portal but just sits trying to connect. We have allowed the new connection in the Windows Firewall and even turned the firewall off as a test with no luck.
My question is, can we change the default 3389 port connection that the Server redirects you to for one PC on the network? If not how do you change in the Server to look at another local port for RDP once in the portal?
Thanks, Jason

Hi Jboy,
Can you navigate to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Terminal Server, WinStations and RDP-Tcp. Right click on the PortNumber dword and select Modify. Change the base to Decimal and enter a new port between 1025 and 65535
that is not already in use. Finally click OK.
http://support.microsoft.com/kb/306759
Thanks,
Umesh.S.K

How Do You Change the Remote Desktop Listening Port in Win 8.1 Pro

I am trying to setup two Win 8.1 Pro computers for Remote Desktop access on my local network. I can get Remote Desktop working fine on both when they are using the default RD port 3389. I am unable to change the listening port on one of the computers so
that I can access either via a public Internet connection. I change the listening port in the Registry, reboot the computer and verify that the port number has been changed BUT the computer still responds to the old port 3389 and can't connect via the new
port number. I added a Firewall rule for the new port, but that did NOT solve the problem.
I have followed the procedure below and verified in the Registry that the port is changed but the Remote Desktop remains accessible only on the default port 3389. The new port number in the Registry is 39699. I used a network scanner and it shows the computer
is still listening on port 3389 for Remote Desktop connections. Why is Win 8.1 Pro ignoring the new port number in the Registry and still responding on 3389? Is there another place in Win 8.1 Pro that the port also needs to be changed. I also added a new rule
in the Firewall to allow incoming requests on port 39699? This is a very frustrating problem, any suggestions are greatly appreciated.
I followed the procedure shown below.
Hi ,
Based on my test, we can change the listening port for Remote Desktop.
To change the port that Remote Desktop listens on, follow these steps.
1.Start Registry Editor.
2.Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
3.On the Edit menu, click Modify, and then click Decimal.
4.Type the new port number, and then click OK.
5.Quit Registry Editor.
6.Restart the computer.
Meanwhile, please note, please type the new integer port number between 1025 and 65535 in the PortNumber text box.
And make sure the new port number is not in use by other application.
We may use the command below to check the result.
netstat -a
Also, we can use Network Monitor to trace the port.
Microsoft Network Monitor 3.4
Regards,

Hi,
There are two item that should be modified to change the default 3389 port:
One is: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd\Tds\tcp]. Modify the PortNamber to the one you want.
The other is: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentContro1Set\Control\Tenninal Server\WinStations\RDP\Tcp]. Modify the PortNumber to the one you want.
In your case, you missed the first one.
Regards
Wade Liu
TechNet Community Support

How to change the listener port number on a standby database

i want to change the listener port number from 1525 to 1545, which is running on a standby database.
i did the following steps and got some error.
1. i stop listener and modfy listener.ora
2. i login in standby DB and issue 'alter system set local_listener='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';'
3. i login in dg broker and issue 'edit database 's1' set property 'LocalListenerAddress'='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';' and a error coming out ORA-16703: cannot set the property while the database is enabled
4. then i disable database
DGMGRL> disable database 'ssmscs';
5. DGMGRL> edit database 's1' set property 'LocalListenerAddress'='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';
Error: ORA-16541: site is not enabled
Configuration details cannot be determined by DGMGRL
what can i do ? can anybody help me out? thanks in advance.
Edited by: user1835127 on Nov 19, 2008 2:09 AM

Hi
You have to edit the following files in $ORACLE_HOME/network/admin or $TNS_ADMIN/ :
In your listener.ora on your standby
MQ_LIST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = superman.dk)*(PORT = 1524))*
TNSNAMES.ORA (on your primary and standby)
MQ_LIST =
(DESCRIPTION =
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = superman.dk)*(PORT = 1524))*
(CONNECT_DATA = (SID = MQ_LIST))
after that do
lsnrctl reload

Changing the listener port number in a cluster environment

Hello,
I have an Oracle 10g database on a Windows cluster environment with Oracle Fail safe. I am trying to change the default listener port number - these are the steps I have done to change the port number:
1) Take the listener offline via Oracle Fail safe
2) stop the original listener from the command line
3) change the port number in the listener.ora file & save
4) start the original listener
5) bring the listener online in Fail safe
6) register the listener in the database with ALTER SYSTEM SET LOCAL_LISTENER....
After all this, when i check the status of the listener via lsnrctl, i see that the new port number is used, however in the Fail safe administrator, I still see the default port 1521. How do I go about changing the port number so that Fail safe also registers the change?

I did troubleshooting to verify the group, but this just changed the port number back to the default in the listener.ora & tnsnames.ora.
So I did all the steps again to change the port number from the default to another - via lsnrctl status, i see that the new port number is being used, I can also log in to the database via Toad using the new port number, in v$parameter i see that the local_listener is registered on the new port number....only under the Fail Safe manager, the port number (under listener parameter) has not changed....it still shows the default port number. Anyone know how to change this???

Changing the Listener Port Number

Hi RACers,
I need to change the TNS listener port number from the default of 1521 (don't ask!).
I'm on Solaris10/Oracle10g 10.2.0.3 using a 2 node cluster.
I've tried editing the relevant files, bouncing everything and re-starting CRS, but that doesn't work. I tried using Netca to delete the listener and re-create it with a different port number and that didn't work either. The instances did not re-register despite having their local_listener parameter changes.
Obviously I'm doing something wrong, but don't know what. Any ideas or do you know where a procedure to do this is documented?
Thanks in advance.

My posting was not aimed at the OP at all.. not his fault that Oracle insists on using a TCP port that's NOT registered for Oracle use.
It is all Oracle's fault that port 1521 is used instead of 1527.
As for what Oracle books say.. bahumbug. Means nothing ito playing by the same networking rules as everyone else.
Port 1527 is what is registered for and by Oracle as use for Oracle tcp traffic. Not fricken port 1521!
And why is this a problem?
If you're in the network business and deal with everything and anything from network analysis and management to rewriting ToS bytes for proper DiffServ application.. then it is very frustrating to find a major company like Oracle ignoring the networking rules.
I read that as Oracle telling us "screw you".

Problem when I tried to change weblogic listen port from 7001 to 80

HI! I have problem when I tried to change weblogic listen port from 7001 to 80. When I changed from 7001 to 7777 then all works ok! But why not on 80? With apache all works ok on 80 too.
I restart my weblogic server and then I have following errors.
<2009.1.4 16:02:13 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to STARTING>
2009.1.4 16:02:14 oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkPr
oviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.
framework.wls.spi.JMXFrameworkProviderImpl"
2009.1.4 16:02:15 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
<2009.1.4 16:02:22 EEST> <Notice> <Log Management> <BEA-170027> <The Server has
established connection with the Domain level Diagnostic Service successfully.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to ADMIN>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to RESUMING>
<2009.1.4 16:02:22 EEST> <Emergency> <Security> <BEA-090087> <Server failed to b
ind to the configured Admin port. The port may already be used by another proces
s.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default". The address 85.254.224.235 might be
incorrect or another process is using port 80: java.net.BindException: Address
already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Critical> <WebLogicServer> <BEA-000362> <Server failed
. Reason: Server failed to bind to any usable port. See preceeding log message f
or details.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[2]". The address 127.0.0.1 might be i
ncorrect or another process is using port 80: java.net.BindException: Address al
ready in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[1]". The address 192.168.0.102 might
be incorrect or another process is using port 80: java.net.BindException: Addres
s already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FAILED>
<2009.1.4 16:02:22 EEST> <Error> <WebLogicServer> <BEA-000383> <A critical servi
ce failed. The server will shut itself down>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FORCE_SHUTTING_DOWN>
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
Best regards!

Debuger,
It does not matter which WLS version I am using (although I'm using 10.3, the one that comes with JDev 11g).
The problem is that SOME OTHER PROCESS on your machine is listening on port 80. Guess you need to go to the Microsoft forums to find out how you can tell what that OTHER, NOT WLS process is.
John

IOS Zone firewall (ZFW) & changing SSH listening port

I'll have to check into the deetails again but I recall there being a way to change the listening port for SSH. Not only do you have to configure SSH itself to listen on a new port but I think there was something about making the inbound interface part of a rotary group or something.
Anyway, my question is more about how the zone firewall reacts to this. If I have inspect set for SSH, (or pass) and yet change the default port for it, does the IOS still know to take the configured action on the protocol? I'll try to test this myself once I have an opportunity but may not be able to for several days, plus if anybody has anything further to add regarding any other implications this port change mgiht have, please share
Thanks!

Hi Julio,
You are ever helpful sir Howver, things are not making sense.
Ok so to take it from the top. So far I have done the following:
Router(config)#ip ssh port 2340 rotary 1
Then:
Router(config)#line vty 0 123 (123 = max # of vty lines, my actual # is different)
Router(config-line)#rotary 1
This of course does not make SSH on port 2340 work from the Internet zone to Self as I have not yet modified the firewall nor done the ip port-map command. It does work from the LAN side to Self since that zone-pair is more forgiving, however, it works on both 22 and 2340 which I thought odd since I thought the ip ssh command changes the SSH server listening port.
I have not yet permanently set the ip port-map command. However I ran it once and then did a sh ip port-map ssh
This showed system defined ssh port maps for tcp and udp on 22, and then my user defined one for tcp port 2340. Interesting that the system-defined ones are both UDP and TCP - I thought SSH was TCP only.
According to the IOS command referendces (for release 15.2), I should not be able to remove the system-defined port map entries as it would give an error. However, I did no ip port-map ssh port tcp 22 and the same for the UDP entry and they disappeared - so now for sh ip port-map ssh I get no results returned. Yet, SSH still works on 22 and 2340.
Be that as it may, after some further testing I've concluded that with or without use of the ip port-map ssh port tcp 2340 entry, SSH works (from LAN to Self) on either port 22 or 2340. It seems ip port-map has no effect on the SSH server itself (?). Or perhaps PAM is overridden by the ip ssh commands?
So at that point I decided to stop testing, not doing anything with firewall yet, until I understand things better. So far, the IOS is very confusing in it's behavior.
Changing the SSH server's listening port via ip ssh command to something other than 22 seems to not actually change anything, it just adds that port in addition to 22.
Port-application mapping appears to have no effect on the SSH server (I have not tested whether ip ssh overrides PAM or vice versa)
So far there seems to be no way to actually change port 22 usage - even "deleting" the PAM entry for ssh via 22 has no effect.
Confusing!

ACS 4.1 change Radius listen port

In ACS 3.3 it was possible to specify the radius listen port with registry keys:
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\CiscoAAAv3.3\CSRadius]
"AuthenticationPort"=dword:0000064e
"AccountingPort"=dword:0000064f
"AuthenticationPortNew"=dword:0000064c
"AccountingPortNew"=dword:0000064d
This does not work anymore in version 4.1.
Does anyone know how to change the radius listen port in version 4.1 ?
Thanks,
Gerard van Bon

In 4.x all registry config was moved into the sql anywhere db.
If you can get hold the Sql Anywhere dev kit to get the Db edit app AND know your ACS database password and then can find the value in the table structure.. then yes you could change the RADIUS listen port.

Changing the listening ports of ARD

I know how to change the listening port of SSH from 22 to some other number.
Is there any way to configure ARD (in plist maybe?) so that it can try connecting to SSH on a non-default port number.
Whilst I know how to secure SSH (not properly secured in OS X by default) I would rather change it's listening port to avoid the traffic that will simply try to bruteforce in.
So if I edit ssh_config and sshd_config on my Macs will this break ARD? Or if these conf files are properly edited (ssh_cnfig on client changed to port 22222 and sshd_config on server changed to 22222) will ARD connect seamlessly?
In short does ARD absolutely need Remote Login (SSH) to be running on the default port 22?

hmm okay, but i don't need to port forward 22 from my router to my mac to allow ARD access, only ports 5900, 5988 and 3283.
That improves things since 22 is not visible to the WAN.
Still, I'd like to know the answer to my question in the previous post.
And what about re-mapping VNC from 5900 (another obvious target although prob not vulnerable to VNC exploits since I expect Apple have modified this service and somehow hooked it into the authentication of the ssh protocol)?
Message was edited by: doz

Changing the aaa_server listening port

I need to change the port from 6021 to 6121 on my existing OAM infrastructure, I have modified the ois server from 6022 to 6122 with no issues, but I can not find the config files to change the access servers. Anyone have any luck with this?

Thanks for the help, but I have tried that and there is no option during the reconfiguration for the listening port for the access server. I looked in the sample silent mode xml file and there is no named value pair for listening port either.
Below is the reconfiguration steps. Maybe there is another option that needs to be added after the reconfig to get the port configuration.
bash-3.2$ ./configureAAAServer reconfig /u01/app/oracle/product/oam10.1.4/access/
Please enter the Mode in which you want the Access Server to run : 1(Open) 2(Simple) 3(Cert) : 2
Please note that the Global Oracle Access Manager Access Protocol Pass phrase has to be the same across all Access Servers and Web Gate's installed in Simple mode.
Please enter the Global Oracle Access Manager Access Protocol Pass phrase :
Do you want to store the password in the file ? : 1(Y) 2(N) : 1
Preparing to generate certificate. This may take up to 60 seconds. Please wait.
Generating a 1024 bit RSA private key
...................................++++++
................++++++
writing new private key to '/u01/app/oracle/product/oam10.1.4/access/oblix/config/simple/aaa_key.pem'
writing RSA key
Using configuration from /u01/app/oracle/product/oam10.1.4/access/oblix/tools/openssl/openssl_silent.cnf
DEBUG[load_index]: unique_subject = "yes"
Check that the request matches the signature
Signature ok
The Subject's Distinguished Name is as follows
countryName :PRINTABLE:'US'
stateOrProvinceName :PRINTABLE:'Some-State'
localityName :PRINTABLE:'Locality Name'
organizationName :PRINTABLE:'Some-Organization Pty Ltd'
organizationalUnitName:PRINTABLE:'production'
commonName :PRINTABLE:'hostName.domainName.com'
emailAddress :IA5STRING:'[email protected]'
Certificate is to be certified until Oct 12 15:10:07 2011 GMT (365 days)
Write out database with 1 new entries
Data Base Updated
Access Server mode has been re-configured successfully.
Please note that new security mode will take effect only after the security mode for this Access Server is changed to 'simple' from the Access Manager System Console.
Do you want to specify or update the failover information ? : 1(Y) 2(N) :2
Please restart your Access Server by executing the '/u01/app/oracle/product/oam10.1.4/access/oblix/apps/common/bin/restart_access_server' program from command line.
Press enter key to continue ...

WLST - Changing server's listen port

Hi,
i'm trying to change the listen port of a managed server using WLST with the following code :
readDomain('...')
cd('Servers')
cd('myServer')
set('ListenPort',8000)
updateDomain()
closeDomain()
Everything is ok so far.
Now, if i try to deploy an ear onto this server i get the folowing exception :
*<20 juil. 2010 10 h 18 CEST> <Warning> <HTTP> <BEA-101162> <User defined listener weblogic.wsee.deploy.ServletDeployListener failed: weblogic*
*.wsee.deploy.WSEEServletEndpointException: Failed to prepare wsse module: admin-tools.war.*
weblogic.wsee.deploy.WSEEServletEndpointException: Failed to prepare wsse module: admin-tools.war
at weblogic.wsee.deploy.ServletDeployListener.contextPrepared(ServletDeployListener.java:32)
at weblogic.servlet.internal.EventsManager$FireContextPreparedAction.run(EventsManager.java:480)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.EventsManager.notifyContextPreparedEvent(EventsManager.java:149)
Truncated. see log file for complete stacktrace
weblogic.wsee.ws.WsException: weblogic.wsee.security.configuration.WssConfigurationException: Certificate Alias not supplied
at weblogic.wsee.deploy.WSEEModule.prepare(WSEEModule.java:129)
at weblogic.wsee.deploy.ServletDeployListener.contextPrepared(ServletDeployListener.java:29)
at weblogic.servlet.internal.EventsManager$FireContextPreparedAction.run(EventsManager.java:480)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
Truncated. see log file for complete stacktrace
weblogic.wsee.security.configuration.WssConfigurationException: Certificate Alias not supplied
at weblogic.wsee.security.policy.SecurityPolicyCustomizer.init(SecurityPolicyCustomizer.java:69)
at weblogic.wsee.security.policy.SecurityPolicyCustomizer.process(SecurityPolicyCustomizer.java:75)
at weblogic.wsee.policy.runtime.PolicyServer.processAssertions(PolicyServer.java:167)
at weblogic.wsee.policy.runtime.PolicyFinder.readPolicyFromStream(PolicyFinder.java:99)
at weblogic.wsee.policy.runtime.PolicyFinder.loadPolicies(PolicyFinder.java:179)
Truncated. see log file for complete stacktrace
weblogic.wsee.security.configuration.WssConfigurationException: Certificate Alias not supplied
at weblogic.wsee.security.bst.ServerBSTCredentialProvider.initSSLCredential(ServerBSTCredentialProvider.java:224)
at weblogic.wsee.security.bst.ServerBSTCredentialProvider.initCredentials(ServerBSTCredentialProvider.java:97)
at weblogic.wsee.security.configuration.WssConfiguration.initDefaultConfiguration(WssConfiguration.java:327)
at weblogic.wsee.security.configuration.WssConfiguration.init(WssConfiguration.java:119)
at weblogic.wsee.security.configuration.WssConfiguration.getSupprotedTokens(WssConfiguration.java:171)
Truncated. see log file for complete stacktrace
Weblogic Portal 10.2
Thx a lot
Emmanuel

Hi,
<Warning> <HTTP> <BEA-101162> <User defined listener weblogic.wsee.deploy.ServletDeployListener failed: weblogicAbove BEA-101162 is thrown while deploying a WSDL that references a schema from a URI that is not accessible, the WebService fails to be deployed and the WebService is not available to service requests.
I am not sure if this is applicable to you but you can refer to metalink document Description of All Signature Patterns in the Current Signature Patterns Release [ID 749964.1] --> refer "Signature ID: 003132"
Hope this helps.
Regards,
Mithun

Changing Listen Port

Similar Messages

Maybe you are looking for