Changing log file name (weblogic.log)

hi!
maybe you could try putting this in the weblogic.properties file or the
starscript shell:
weblogic.system.logFile= [logfile name]
Hope this helps!
Mauricio

Similar Messages

In R12 how to change concurrent output/log file name prefix?

how to change concurrent output/log file name prefix?

but i want to change change concurrent output/log file name prefix?You cannot, and I believe it is not supported for all concurrent requests -- Please log a SR to confirm this with Oracle support.
Thanks,
Hussein

How to using variable in log file name on ODI 10.1.3.5?

Hi,
how can i put a my variable into my log file name?
now I use this syntax --> ExRate_<%=odiRef.getSysDate("MMddyyHHmm")%>.log.
But I have a variable for example #server, the value = "oracleProd" and i want to put the variable value into my log file name.
so the result that i want to get is --> ExRate_oracleProd_<%=odiRef.getSysDate("MMddyyHHmm")%>.log
so how can I apply the variable value to my log file name? I try using odiRef.getSessionVarList(#Month) but it didn't work.
Thanks.
Regards,
chris
Edited by: 877142 on Aug 3, 2011 9:36 PM

hi,
You can by
ExRate-#server-<%=odiRef.getSysDate("MMddyyHHmm")%>.log
Note that I have changed the underscores to dashes. This is because ODI will assume that this is a wildcard/escape character.
Hope this helps!!
Bos

Export dump file and log file name as sysdate in script

Hi to All,
Can anybody help me to give logical backup export dump file namd log file name is as contain sysdate in its name so that we can Uniquelly identified it.
Regards
DXB_DBA

On windows it gets a bit hairy as there really is no clean and nice way of doing it.There are a couple of options.
1. If you can rely on dateformat not changing, you can use a static substring expression. For example, the following might work w/ finnish locale echo %date:~3,2%%date:~6,2%%date:~9,4%Similarly, when you know the dateformat you can tokenize the output of 'date /t' and discard the tokens you don't want.
2. You can set dateformat to your liking and then just use %date% in your script
3. You can run a "SELECT to_char(sysdate,..." into a file and then read that file in your script.
4. Simon Sheppard also has a solution you could use as a basis. I have a slight issue with the approach, but that could just be me.
5. Use gnuwin32 or similar ;)
Also note that %date% env var is set automatically from w2k onwards, so some of the solutions might not work w/ older versions.

Shell Script to grep Job File name and Log File name from crontab -l

Hello,
I am new to shell scripting. I need to write a shell script where i can grep the name of file ie. .sh file and log file from crontab -l.
#51 18 * * * /home/oracle/refresh/refresh_ug634.sh > /home/oracle/refresh/refresh_ug634.sh.log 2>&1
#40 17 * * * /home/oracle/refresh/refresh_ux634.sh > /home/oracle/refresh/refresh_ux634.sh.log 2>&1
In crontab -l, there are many jobs, i need to grep job name like 'refresh_ug634.sh' and corresponding log name like 'refresh_ug634.sh.log '.
I am thinking of making a universal script that can grep job name, log name and hostname for one server.
Then, suppose i modify the refresh_ug634.sh script and call that universal script and echo those values when the script gets executed.
Please can anyone help.
All i need to do is have footer in all the scripts running in crontab in one server.
job file name
log file name
hostname
Please suggest if any better solution. Thanks.

957704 wrote:
I need help how to grep that information from crontab -l
Please can you provide some insight how to grep that shell script name from list of crontab -l jobs
crontab -l > cron.log -- exporting the contents to a file
cat cron.log|grep something -- need some commands to grep that infoYou are missing the point. This forum is for discussion of SQL and PL/SQL questions. What does your question have to do with SQL or PL/SQL.
It's like you just walked into a hardware store and asked where they keep the fresh produce.
I will point out one thing about your question. You are assuming every entry in the crontab has exactly the same format. consider this crontab:
#=========================================================================
# NOTE: If this is on a clustered environment, all changes to this crontab
#         must be replicated on all other nodes of the cluster!
# minute        (0 thru 59)
# hour          (0 thru 23)
# day-of-month (1 thru 31)
# month         (1 thru 12)
# weekday       (0 thru 6, sunday thru saturday)
# command
#=========================================================================
00 01 1-2 * 1,3,5,7 /u01/scripts/myscript01 5 orcl dev
00 04 * * * /u01/scripts/myscript02 hr 365 >/u01/logs/myscript2.lis
00 6 * * * /u01/scripts/myscript03 >/u01/logs/myscript3.lisThe variations are endless.
When you get to an appropriate forum (this on is not it) it will be helpful to explain your business requirement, not just your proposed technical solution.

Different log file name in the Control file of SQL Loader

Dear all,
I get every day 3 log files with ftp from a Solaris Server to a Windows 2000 Server machine. In this Windows machine, we have an Oracle Database 9.2. These log files are in the following format: in<date>.log i.e. in20070429.log.
I would like to load this log file's data to an Oracle table every day and I would like to use SQL Loader for this job.
The problem is that the log file name is different every day.
How can I give this variable log file name in the Control file, which is used for the SQL Loader?
file.ctl
LOAD DATA
INFILE 'D:\gbal\in<date>.log'
APPEND INTO TABLE CHAT_SL
FIELDS TERMINATED BY WHITESPACE
TRAILING NULLCOLS
(SL1 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL2 char,
SL3 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL4 char,
SL5 char,
SL6 char,
SL7 char,
SL8 char,
SL9 char,
SL10 char,
SL11 char,
SL12 char,
SL13 char,
SL14 char,
SL15 char)
Do you have any better idea about this issue?
I thought of renaming the log file to an instant name, such as in.log, but how can I distinguish the desired log file, from the other two?
Thank you very much in advance.
Giorgos Baliotis

I don't have a direct solution for your problem.
However if you invoke the SQL loader from an Oracle stored procedure, it is possible to dynamically set control\log file.
# Grant previleges to the user to execute command prompt statements
BEGIN
dbms_java.grant_permission('bc4186ol','java.io.FilePermission','C:\windows\system32\cmd.exe','execute');
END;
* Procedure to execute Operating system commands using PL\SQL(Oracle script making use of Java packages
CREATE OR REPLACE AND COMPILE JAVA SOURCE NAMED "Host" AS
import java.io.*;
public class Host {
public static void executeCommand(String command) {
try {
String[] finalCommand;
finalCommand = new String[4];
finalCommand[0] = "C:\\windows\\system32\\cmd.exe";
finalCommand[1] = "/y";
finalCommand[2] = "/c";
finalCommand[3] = command;
final Process pr = Runtime.getRuntime().exec(finalCommand);
new Thread(new Runnable() {
public void run() {
try {
BufferedReader br_in = new BufferedReader(new InputStreamReader(pr.getInputStream()));
String buff = null;
while ((buff = br_in.readLine()) != null) {
System.out.println("Process out :" + buff);
try {Thread.sleep(100); } catch(Exception e) {}
catch (IOException ioe) {
System.out.println("Exception caught printing process output.");
ioe.printStackTrace();
}).start();
new Thread(new Runnable() {
public void run() {
try {
BufferedReader br_err = new BufferedReader(new InputStreamReader(pr.getErrorStream()));
String buff = null;
while ((buff = br_err.readLine()) != null) {
System.out.println("Process err :" + buff);
try {Thread.sleep(100); } catch(Exception e) {}
catch (IOException ioe) {
System.out.println("Exception caught printing process error.");
ioe.printStackTrace();
}).start();
catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
public static boolean isWindows() {
if (System.getProperty("os.name").toLowerCase().indexOf("windows") != -1)
return true;
else
return false;
* Oracle wrapper to call the above procedure
CREATE OR REPLACE PROCEDURE Host_Command (p_command IN VARCHAR2)
AS LANGUAGE JAVA
NAME 'Host.executeCommand (java.lang.String)';
* Now invoke the procedure with an operating system command(Execyte SQL-loader)
* The execution of script would ensure the Prod mapping data file is loaded to PROD_5005_710_MAP table
* Change the control\log\discard\bad files as apropriate
BEGIN
Host_Command (p_command => 'sqlldr system/tiburon@orcl control=C:\anupama\emp_join'||1||'.ctl log=C:\anupama\ond_lists.log');
END;Does that help you?
Regards,
Bhagat

Dynamic bad and Log file names!!

Hi

Hi
I have the scenario like the data files would be passed as parameter to the mapping , and the mapping would have the premapping procedure which would change the file name in the external table definition. This works fine. But the one more issue I have is that, I would like to change the bad file,log file and discard file name also through this procedure. In other words, for each incoming data file I would like to create a bad ,log and disc file.So How do I accomplish in the present procedure which does the following alter table statement
execute immediate 'alter table '||p_table_name||' location('''
||p_file_name||''')';
Any suggestion would be greatly appreciated
Thanks
Balaji

How to add a date suffix to the log file name

In Windows, I want to run certain commands and save the output to a logfile every day. How to add a suffix to the log file name so I can distinguish which log file for which day?
e.g. cmd >> logfile.date

AZ wrote:
In Windows, I want to run certain commands and save the output to a logfile every day. How to add a suffix to the log file name so I can distinguish which log file for which day?
e.g. cmd >> logfile.datemy best friend name is "google", refer to this [url | http://stackoverflow.com/questions/203090/how-to-get-current-datetime-on-windows-command-line-in-a-suitable-format-for-usi]
This is what i did
1) created a dummy file in c drive
2) copy pasted below lines, you can play around more with the format
set _my_datetime=%date%_%time%
set _my_datetime=%_my_datetime: =_%
set _my_datetime=%_my_datetime::=%
set _my_datetime=%_my_datetime:/=_%
set _my_datetime=%_my_datetime:.=_%3) Rename the file from dos
ren some.txt dummy_file_%_my_datetime%.txt4) Here goes the output
C:\dir
dummy_file_Mon_09_20_2010_161347_21.txt
Most of the code i copied from above url, you can tweak a little bit based on ur requirement and format.
Regards
Learner

Log File name and path to check Excel Download

Hi ,
When we download a report in Excel/PDF/HTML is it logged in any log file ? What is the log file name and path?
Regards
Anand

Hi...
one of my user tried to download the report in excel format. that excel was not opening. then he tried to download the same report again. this time he was able to open thee excel.
So he wants to investigate why this happened first time. could you please suggest how we can investigate this?
Regards
Anand

Common log file name for ESB

What is the log file name which is logging all the informations of ESB?

There are several
The most common ones are :
$OH$\soa\j2ee\home\log\home_default_group_1\oc4j\log.xml
and
$OH$\soa\bpel\domains\default\logs\domain.log

Apache2 log file names

I'm running Mac OS X Server 10.6.4, and have 3 web sites that all resolve to the same IP number. All is working just fine except for naming the log files. I'd like to have separate files for each virtual site; that is, traffic to example1.com should go to /var/log/apache2/example1_access)log, traffic to example2.com should go to /var/log/apache2/example2accesslog, etc. I set this up in server admin, but the names of the actual log files are something like example1accesslog.1287014400 and example2accesslog.1286409600.
This causes problems in having my web usage program finding the correct file. Can anyone point me to relevant documentation on how to solve this problem?

The timestamps on the files are related to the fact you have log file rotation turned on.
As for how to solve it that depends a lot on the analytics program you're using, which you omit to mention.
You could turn off the log file rotation, but then you'd have issues with ever-growing log files
You could rename the logs files yourself
You could teach the analytics program to understand your log file names (this is the approach I'd take - rotating logs is VERY common and I can't think there's an analytics that doesn't handle it)

Adpatch default log file names-Raghuram Kotnana

Does using of adpatch default log file names during patching makes it difficult to keep an accurate record of your patch history ?

RaghuramKotnana wrote:
Does using of adpatch default log file names during patching makes it difficult to keep an accurate record of your patch history ?
It does make it difficult when you apply many patches and all are logged in the same patch log file. If you encounter issues applying patches while using the default adpatch.log name, it would be also harder to find the proper entries to grep and share with Oracle support.
I would suggest you use the same patch driver name for the log file and replace .drv with .log (i.e. u<patch number>.log).
Details about applied patches from your instance can be found in the tables in (Important tables used by and updated by ADPATCH utility (Doc ID 1520703.1)).
You can also refer to eTRM website for details about each table -- http://etrm.oracle.com/
Thanks,
Hussein

Changing msglog file name using legato

hi all;
i want to change the default file name nsrnmo.log to nsrnmo<date>.log so that new file is always create whenever RMAN is run through Legato. i believe nsrnmo.bat file need to be modified but when i try to call my customized batch file in this file RMAN throws error.
Appreciate if you provide your valuable suggestions and solutions.
Regards,
Aijaz

Tycho,
I did as follows in nsrnmo.bat
SET PRECMD="cmd.exe/c E:\oracle\administration\scripts\secure\date-time.bat >precmd_txt >2>&1"
SET NSR_RMAN_OUTPUT="E:\oracle\administration\logs\nsrnmo%PRECMD%.log"
where date-time is the bat file have following lines
set NLS_DATE_FORMAT=DD-MON-YYYY HH24:MI:SS
for /f "tokens=1,2" %%u in ('date /t') do set d=%%v
for /f "tokens=1" %%u in ('time /t') do set t=%%u
set datestr=%d:~6,4%%d:~0,2%%d:~3,2%
set timestr=%t:~0,2%%t:~3,2%
set datetime=%datestr%-%timestr%
Regards
Aijaz

DataPump Problem. Automaticaly change dump file name.

Deal All
I have create a plsql block and which will backup the database using datapump.
He is working fine in scheduler but he generates error because it doesnot change
file name every time. Against the following he always generates
'EXPORT%U.DMP' = EXPORT01.DMP file name.
Please tell me how i can change every file name automatically.
Thanks
Abid

Hi,
I have 10.2.0.4 db on windows and want to have a full datapump export every night and want a unique file name but this does not work for me. The script just does not execute. I have even tried this from the command line
par file is
DUMPFILE='expdp_testdb_full.'||to_char(sysdate,'YYYYMMDDHH24MISS')||'.dmp'
JOB_NAME=expdp_testdb_full
LOGFILE="expdp_full_testdb.log"
DIRECTORY=DATAPUMP_DIR
FULL=Y
ESTIMATE=STATISTICS
CONTENT=ALL
PARALLEL=20

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

Changing log file name (weblogic.log)

Similar Messages

Maybe you are looking for