Changing Mandates in Mass

Dear expert,
We want to change in mass the status of mandates by using  FSEPA_M4 transaction. We have 3 options:
1- Button " Change mandates immediately" at the selection screen
2- Button "Change Mandates initial" at the display of the list of mandates
3- Button "Change Mandates again" at the display of the list of mandates
Could you please tell me the  difference between these 3 options?
Thank you in advance.
Best regards.
O. Nada

Dear,
Your query is not clear.
If you want to set the firming date manually then go to MD04Header menu EditSet Manual firming date.
Regards,
R.Brahmankar

Similar Messages

  • Reason for rejection not changed in transaction MASS

    Hi everybody,
         I'm trying to update a sales order item with a reason for rejection (field VBAP-ABGRU) in transaction MASS but it doesn't work. I took a look in SAP notes and found similar problems but these notes (specially note 390105) don't apply to our version (4.7 support package 22). Before opening a note in SAP I would like to have someone's opinion about the issue.
         Thanks,
    Paulo

    Paul, it doesn't work because the field is not updated despite success message issued when the transaction is finished (I tried to change the field content from blank to other value). The field is available in transaction MASS and I have successfully tested it in another system (release 6.00). But now I found a note (regarding to the same problem in another field - MASSSDPOSVBKD-KURRF) that can be helpful. It's note 777746 and it applies to our release. So, I'm waiting for the basis team to implement it to see what happens.
    Thank you,
    Paulo

  • Import status- import running does not change during the mass import of TR

    Dear All,
    I have successfully imported single requests in my newly installed SAP ECC EHP4 PRD system but when I have tried to import 8 transport requests(Mass Import) then the Import status is not changing from import running (Truck button still appears).
    But the effect of the request is seen in the production system but the status does not change.
    I have checked the logs and found that all the requests have been imported successfully but the Truck status does not change.
    I have restated the system but no use still the same.
    Thanks in Advance...
    Latha

    Import Running for a long time on ECC 6.0
    The background job RDDIMPDP is running on client 000 as well as the relevant client.
    Below is the TP System Log:
    WARNING: System CC6. Warning. 20090914042136 :
    WARNING: Background job not running properly. Function: G Jobcount: 04512801 Status: S.
    Please check the system. Use transactions SM21, SM37, SM50.
    WARNING: (This warning is harmless if no further warnings follow.)
    As per NOTE: 26966, it could be b'cause the background job process slots are occupied,
    Regards
    Vikas Nagar

  • Can I safely change N95 8GB Mass Storage's name?

    I have many software installed on my N95 8GB. I have an option to change the Mass Storage's name.
    Is it safe to change the name from "Mass Storage" to something else?
    Thanks.

    Yes, the name of the mass storage can be changed with no ill effects.
    Software always accesses the mass storage by "drive letter", pretty much the same way Windows does. To see this in action, create a playlist containing a few music files that are on your memory card and then open the resulting playlist file in a text editor. You'll see that all the tracks are referred to as E:\whatever_path\music_file.mp3
    Interestingly enough, from a technical point of view, the name assigned to the mass storage is in fact a special kind of file called a "volume identifier". By changing the volume name you're merely renaming this special file.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Changing Colour en masse in InDesign

    Hi all.
    I am creating a book in InDesign CS1. The client just asked me to change all the page colours from pink to blue. Is there any way to do this en masse?
    I thought that perhaps I could delete the swatch and it would ask me which colour to replace it with (I swear did this once.?) but the Pantone swatch I'm currently using can't be deleted.
    thanks!
    B

    Hi Cindy.
    Well, I only have one placed graphic with those colours (from Illustrator).
    The rest of the book is all done in InDesign.
    B

  • 'Fuzzy' desktop icons: is there a way to change them en masse?

    I apologize if this has been asked before, but after searching the discussions I couldn't find a thing similar to this (non-critical but irritating) issue.
    I have had a Mac for some time, since Classic OS days. I've noticed that some of the older files I have still have what can best be described as old-style icons.
    I thought the best way to explain what I meant was to include a screen shot below. As you can see, the desktop icon for Millais' Ophelia is pixellated beyond recognition. Changing the files (via "Show View Options") to "Show Icon Preview" makes no difference. Looking at the file via Get Info shows that the file itself is AOK, that the Preview looks fine.
    This is not limited to GIFs... JPGs, PSDs, TIFs are all similarly affected.
    I was wondering if anyone knew of a quick and dirty way to strip or scrub files of their existing desktop icons and allow it to be rebuilt with the lovely OS X desktop icon... short of opening each file, saving it, and closing it again (which is a problem for JPGs and the inherent lossy-ness).
    Thank you in advance!
    sandra

    The problem is that the old files already have a custom icon, albeit a very old very small custom icon (they are 32x32 pixels, versus the "normal" 128x128 icons, or the now possible 512x512). When a custom icon is present, that is what Finder will display. If NO custom icon is present Finder will, if told to do so in View options, draw a lovely icon. Indeed, in CoverFlow view it will draw 512 icons.
    One way to achieve this happy state is to do GetInfo on a file, select the wee little icon at the top (a nearly invisible blue halo will surround it), and then do Cut from the Edit menu or with Command-x. This will remove the old custom icon without changing the file in any other way, leaving your jpegs in exactly the same state they were in.
    Doing this for a whole buncha files is obviously tedious. I suspect you get an Applescript or Automator action which would batch process a folder, but I'm not much of a scripter. People who are scripters are often very helpful, posting a cry for help in either forum might get you something to do the job:
    http://discussions.apple.com/forum.jspa?forumID=724 The Applescripters are here
    http://discussions.apple.com/forum.jspa?forumID=1261 The Leopard Automators are here
    There is a little program called CocoThumbX you can download, then drop files in batches and check the box to Remove Thumbnail, and it will do so. It can also create new custom thumbnails, at 128x128 pixels.
    Francine
    Francine
    Schwieder

  • Changing fonts en masse

    Is it possible in iweb to change all instances of one font to another font?  Ideally, I would do this for an entire site in one fell swoop but page at a time would be okay too.  My site uses Calibri, which turns out to be a not that common font, and it might be nice to change it to something more common.  Not a big deal but it might be nice.
    TIA,
    eric

    For a website you need to use either web-safe fonts or upload a font kit to your server and reference these in the styles...
    http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
    Converting all your text to images is not a realistic option.
    If you want to be able to specify fonts for the whole site you need to built your pages using html and reference a CSS stylesheet in the head of each.

  • What are the views/fields that we can't change by Mass maintenance of MMR(material master record)?

    Hello friends,
              I would like to know the fields/views that we can not change by using mass maintenance of MMR if there are open PO for that particular material in concern. Likewise there was a question in SAP certification exam having options: "base unit of measure", "material type" and so on....

    in general you can change any field that can be changed in MM02. if the field is grayed then you cannot. e.g. if you make use a MRP profile. and in this profile the maintenance of those fields is disabled then you cannot do it MM17 either.

  • Mass changes in PO's - Change vendor number

    Dear Expert,
    I would like to know your advice.
    I have one clinet requiremnet , they want to do some mass changes in a PO's -  they want to change the vendor code in a purchase orders.
    these purchase order just created and not any inventory or financial posting has been done.
    Some PO's are released completely and some are not released completely.
    They want to change the vendor , the new vendor which they want to incoroporate is having different payment terms and also the partner function may vary.
    The new vendor is from same location and country.
    I tried in MASS but it is giving some error messages like PO is still faulty and not allowing to make a changes.
    My Question is :
    1.If we want to do the chages then is it possible?
    2.If yes then what are the min things needs to be consider while doing the changes ( which data or fields of vendor master from old to new vendor)
    3.is there any other way to do changes other then MASS.
    4.Is it a advisable to change a vendor ( if possible) or shall i write to the client that cancel the all existing PO and create new PO with ref to old PO for new vendor.
    Kindly advise on above.
    Thanks

    Hi ,
    Thanks for your response.
    I would like to add on my existing things,
    The PO's those are partial release , I can cancel those partial release and can able to bring to the original status( w/o any released)
    Is it possible if the PO is not at all released then we can make a changes.
    Appreciates your earnest response.
    Thanks

  • How to change MRP Type in mass ?

    Hi experts,
             I want to change MRP type (MDMA-DISMM) in MRP 1 view of material master. I checked in Tcode MM17 , but this field is not available for mass maintenance.
            How to change it in mass? Thanks in advance.
    Regards,
    Jay

    Dear,
    Tcode: MM17
    Select Plant Data for material: MARC
    In the menu: Click on Select New Fields
    In the selction list, pick MRP type
    Once MRP type is selection, replace old MRP type with NEW MRP type
    Once New MRP type is selection, enter the materials or plant for which NEW MRP TYPE is applied
    Lastly, execute the transaction.
    OR,
    You are  trying to change value of MARC-DISMM
    You can use BAPI BAPI_MATERIAL_SAVEDATA
    Regards,
    R.Brahmankar

  • Create a new mass Change

    1) Is any one know the steps to create a new mass Change?
    2) What is the relation between mass Change definitions and mass Change group, which one I need to create first ?

    iTunes Store: Changing Account Information
    http://support.apple.com/kb/HT1918
    Apple ID Support - Manage Account
    http://www.apple.com/support/appleid/manage/
     Cheers, Tom

  • MASS CHANGE IN SCHEDULE LINE DATE

    Hi All,
    Will u advise whether it is possible to change schedule line date in MASS
    Example. We are having make to order scenario. Sales order is prepared with 25 different line items with shipment date 10 th Feb. Out of these 25 items 10 items are ready by 20 th Jan. If we want to ship these goods on 20 th Jan. we have to change schedule line date item wise.
    Is there any way that we can make this change in a mass without changing delivery date of the sales order.
    Thanks
    Ravi

    V_V2 calls a program that can be 'customized' since it consist of 2 phases:
    1) selection phase
    2) rescheduling phase
    You can copy program SDV03V02 into a custom one and add your own selection criteria without altering the second part of it.
    I alreay made it and it works fine even when upgrading.
    regards
    Roberto Mazzali
    pls. reward if helpful

  • Mass Change of Refrece Operation Set

    Hello.
    I need to change ROS in MASS. I have near around 300 ROS to be change. Is there any transaction for change in Mass. For example for 1 ROS I can chage it through CA12. For Mass change is there any option...
    Thanks in Advance...

    Dear
    1.Check with CA95N or else using CEWB
    2.The best way will be create a BDC to made changes in Routing ,Concern with u r ABAPEr .Try  through BAPI_ROUTING_CHANGE .
    Regards
    JH

  • Mass Maintenance will recognize any customer record in workflow process

    Hi gurus,
    Please help me on the Workflow process, how to handle below workflow  scenario,  is there any logic be hand this.
    please see in BOLD workflow issue.
    1.2     As-Is Business Process
    Currently Data Maintenance teams use standard SAP transaction XD07 to change Customer Account Groups. The standard transaction XD07 allows only one Customer Account Group to be changed at a time. The process is to be manually repeated for every customer. After the Account Group is changes in the request client (X07(10)), an RFC call is made to the BOR client (X07(20)) and then to the transaction client  (X08(10)) to change the Customer Account Group as the SAP ALE process does not support Account Group Changesu2026
    1.3     To-Be Business Process
    From time to time, bulk customer data updates will be needed. This can be the result of business situations that cause multiple updates to be performed for given customer fields such as Customer Account Group field. A new program must be developed to let the user mass update the Customer Account Group field (KNA1-KTOKD). The Program should be accessed on demand using a new T.Code (YMDM_ACCTGRP_CHG).
    Business users will submit a spreadsheet in the appropriate upload format to CDM along with written approval from the Food Service data owner to execute the upload in P07. CDM will execute the upload, record all documentation for the audit change log and notify the submitter when complete
    1.4     To-Be Business Process Flow Diagram
    1.5     Enhancement Functionality
    The following are the requirements:
    u2022     This tool will enable a user to perform bulk update to the customer account group field.
    u2022     The utility should let the user upload a u201CTab delimitedu201D file to mass update the Account Group field.
    u2022     The Load File will have 3 columns, Customer Number (KNA1-KUNNR), Current Account Group (KNA1-KTOKD) and New Account Group (KNA1-KTOKD).
    u2022     The Program must utilize the process behind the standard SAP transaction XD07 to change customer Account Groups in X07(10).
    u2022     The standard customer ALE (DEBMAS) process does not support Customer Account Group changes, so the mass change program must use the RFC functionality to change he Account Groups in the BOR (X07(20)) and Transaction system (X08(10)).
    u2022     Workflows for all updates performed using this T.Code are automatically approved.  No manual approval steps will be needed after data load.
    u2022     Mass Maintenance will recognize any customer record that has an open workflow. If a customer record is already in the request queue, it is u201Coff limitsu201D for any bulk update. That update request to that particular customer record must be rejected.
    u2022     Provide the option to run the process in validation mode and update mode.
    u2022     Report all hard and soft legacy field errors on a validation report.  All u201Chardu201D legacy field validations should be passed before allowing update mode to run.
    u2022     The upload process will produce an error log for all records not loaded into the system.

    see newer message. Problem appears to be related to gmail

  • Change of baseline date in customer document

    Hi Experts,
    Baseline date field is uneditable and when we tried changing it through Mass, it throws error and it is obvious. But user has earlier change this field without changing the payment term. He has directly changed the baseline date. Is there any standard setting exists for this other than OB32?
    Regards
    Partha

    To change mass level, go to FBL5N and select the appropriate customer & perameters then select the line items. select the icon which is shown below then change baseline date as per your requirement then execute.
    Hi,
    Hope it will work.

Maybe you are looking for