Changing memory card in c5.

I would like to  buy a 4 GB memory card for my c5 as my 2 gb card is almost full.My question is that if i buy  a new memory card, can i copy the maps files(cities, diskcache etc) from my 2gb card to the new memory card without corrupting the files?. PLEASE HELP.
Solved!
Go to Solution.

Hello Evrybody,
        Here is a perfect and the easiest solution.It's not my idea.I found it somewhere here.Just follow it.Works well, is at your finger.Only one suggestion:at the restoring steps,read everything and you will succed (at a step,you'll have the button "Advanced"-click on it,and than choose from the "Restore files to" options, the "Alternate location" )
So:
"in mass storage mode
right click on mem card
open property
Click on tools tab
You'll see backup buttom in the dailogue box
Now backup wizard will guide you through out the process
Note that in, 'what to backup otption' select 'Let me choose what to backup'
In items to backup option, expand my computer by clicking (+) plus symbol and check memory card by ticking empty checkbox against your mem card and click next
Now you can browse destination folder where you want to keep your backup files
On clickingfinish buttom ,
Backup proccess will start
You'll have to wait till it shows complete
Not: i have done this on winxp sp3
Do not use nokia phone browser here"
     It was written by "pudu". Excelent idea !!! 

Similar Messages

  • Changing memory cards in a Pavilion dv7-2273cl

    Greetings:
    I wanted to change the memory cards in my laptop (2 cards of 2GB each one), and the ones installed in it have a bus of 1066; but, here in the city where I live, I could get 4GB cards but with a bus of 1333 or 1600.
    I would like to know if there would be any trouble or future problem if I put the 2 (4GB each) memory cards of 1333 or 1600 in my dv7 notebook; because some people told me I could have future problems due to the changing of bus (1066 to 1333/1600).
    Thanks for your kind reply.
    Sincerely.

    I think you are saying your have 2x2GB DDR-1066 (PC3-8500) memory modules installed.
    These can be upgraded to 2x4GB with eitherDDR3-1333 PC3-10600 or DDR3-1066 PC3-8500 modules
    per crucial.com dv7-2273cl memory upgrade, i.e.. Crucial does not recommend the DDR-1600 memory.
    TBD if the DDR-1333 memory will perform at the 1333MHz speed or auto downclock to the (current) DDR3-1066 rate.  Often depends on the MoBo chips and BIOS
    Usual caveats apply:
    There are variants of both DDR3-1333 and DDR3-1066 Wikipedia DDR3_SDRAM, choose wisely.
      The crucial.com scanner can be helpful.
    For best performance, install in matched pairs.  Don't know if the MoBo is dual channel (assume not) - won't matter if installed as matched pair.
    If running windows, you need a 64bit version of the OS to use > 3 or 3.5GB of RAM
    Larry
    Please click the White Kudos star to say thanks for helping.
    Please mark Accept As Solution if my help has solved your problem.

  • Help me loss some appz when change memory card

    i have nokia 5500 sport it came with 512 mb card
    i change with 2 giga memory card
    i backup from old one and put in new one card
    but still lose web- sensor in the new
    i go to nokia phone page but no application or something for that
    any help

    Copy the contents of the old card to your computer, taking care to enable the display of hidden and system files.
    Swap cards and copy everything to the new card. Your applications should still be in place.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • N79 - change memory card from 4 to 8gb

    my n79 came with a 4gb card with some Ngage demos already on it. I also installed Garmin on it.I want to change to a 8gb card so I backup everything from my 4gb card into my pc and restore it in the new 8gb card.
    Everything works but Ngage demos cannot be install or play. And Garmin is missing. How do I transfer all these to the new card?
    Should I also format the card with my phone even when its already formatted by the manufacturer?
    Thanks in advance
    Message Edited by fring on 17-Dec-2008 07:15 AM
    Nokia N79 8GB
    SW Version: 11.049 RM-348
    Solved!
    Go to Solution.

    should i just copy by dragging or use PC Suite to backup/restore?
    i check in the folder and I think not all the files are there. probably the hidden ones are missing
    Nokia N79 8GB
    SW Version: 11.049 RM-348

  • Changing memory card

    I want to change the 128 MB card for a 1 GB card in my 6300. What about the folders that are already on the 128 MB card, can I move them to my computer and then just move them back to the new card or are these folders created automatically?

    Hi mazandaran
    You have of course enabled "show hidden and system files" on your PC. I recently moved content of 2Gb microSD in card reader to new folder on PC desktop and then moved folder contents to 4Gb microSDHC without problems.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Memory Card or Phone Issue????

    Hi guys,
          I really need help so badly. I am using E71 and im having hardtime to transfer my files (photos, videos, and musics) from comp to my phone and vice versa. When i connecting my phone to comp using USB Cable the device will act as removable device in My Computer (WIN XP OS) when i open my Memory Card Driver all icons appear only as shorcuts, when i opened like for an instance "Images Folder" i was able to see my pics from that folder that taken from my phone. I tried to copy those photos over to my comp w/o removing them to its original device, that will work good. As soon as i disconnect my phone from comp and tried to navigate or open Gallery>Images, all pics will appears distorted and sometimes it will show a single pic taken with multiple or lots of copy with the same image. 
        Same with the musics, i transferred from comp to my phone memory card, it will transferred just fine but when i refresh the playlist/track it will appear "0 Copied". There was nothing that recover or recognize but when you connect again the phone to comp you can see the files that was been transferred but the problem is it seems not being recognize buy the phone. I had already reformat the card several times. Used internal phone memory only and took sample pics and transfer them it was look fine. I had tried as well to change memory Card but still doing the same thing. I even used memory card reader but same thing happened.
        Another problem i currently experiencing is when taking pics/video using memory card, can take good pics but as soon as you go to the Gallery you will never see the pics/video that you took but when you connect the phone to comp files will show thats on memory card.....so weird!
    I really cant figure out the problem and im very frustrated for what its acting. I am just thinking to totally RE-FORMAT my phone memory to start all over again. I wish someone can HELP me out with this issue im having...need an answer soon!! =( 

    Hi ajaydavidson..tnx for the ur info but unfurtunately i tried to use memory card reader already because i though it will will be easier for me to do that. Same thing happens, when i connect the card using card reader it card will appear as removable but icons inside appears only as Shortcuts Icons. I was able to open it and able to transfer filed from card to comp anf vice versa but the problem is as soon as i put the card back to my phone files wont ahow at all.. Images appear distorted and unable to refresh the my playlist. I am thinking maybe its a comp problem as well and need to be totally formatted. =(
    Thanks for ur time to replay...^_^ 

  • Rename the memory card in E5

    I change memory card form 2 GB to 4 GB in my nokia E5,but there is a problem,the device show that card as NO Name,and I am not able to found how to rename the card..

    i rename it
    thanx man 
    E5
    software version 0.81.004

  • I have recently changed to an iMac from a Windows PC. How do I delete files and format the memory card in my helmet cam?

    I have recently changed to an iMac from a Windows PC. How do I delete files and reformat the memory card in my helmetcam?

    If you return the memory card to the helmetcam, it may choose to reformat it before use; back to some FAT-16 or FAT-32 format many of these third-party cards and cameras use. Unless you were going to use it for Mac OS X and format it with HFS+ or in a partition map for Mac data, etc.
    If not, the easiest way to reformat the card may have been in the camera itself. I've formatted several kinds of camera cards, drives, USB flash drive, and others. The means varies with the intended purpose. Sometimes the default is the best; since it is platform neutral if the device is seen by both players.
    Good luck & happy computing!

  • Changing the default application to open memory cards

    hi there, im trying to change the application that opens when i insert a memory card into my card reader. At the moment iphoto opens and slows my workflow down. can any one tell me how to change the application, or have nothing open at all when i insert the card?
    Thanks in advance
    russ

    Hi Russell,
    In your Applications folder, you should find 'Image Capture'. In its preferences, you should be able to configure what to do when a camera/media containing photos is mounted.
    Yang

  • Does change of memory card make warranty invalid?

    I am thinking of buying a Tecra notebook. The one I'm interested in has 512Mb RAM. If I purchase a memory card seperatly and install it myself will my Warrenty become invalid?
    Any answers much appreciated!

    No, definitely not.
    The upgrade has no bad influence on the warranty status.
    Mostly the memory slots are placed at the bottom of the unit and you need only to remove the one screw.
    PS: Did you check you user manual? There must be description about the memory upgrade...

  • Change of memory card

    I am willing to upgrade my memory card , if i copy all the data from old one to new one , will all the apps work again
    ?? what do i need to do ??

    Applications are installed to the phones memory by default, so you would be able continue using the applications as per normal, however if the application uses the memory card to store save data or temporary data it may not be able to read it. This is based on the application's in use.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Image browser "memory card utility" downloading to wrong date folder

    Mac OSX 10.7, Image Browser 6.9.0.3 (9L)
    I own 5Dmarkii and 60D.  When I insert memory card, Memory Card Utility (1.7.0.0.9L) launches.  I select Download, and program transfers to my computer.  No fancy settings, just standard.
    Both cameras date setting is correct, and image efix data is correct for date and time shot.  Computer system date and time correct.
    Pictures taken prior to 5:00pm are filed in a folder with previous days date.  Photos after 5:00pm are filed in correct days folder.
    Driving me nuts..... Help please

    I'm having the same issue.  The Canon software behaves as though it catagorizes the photos (and names them, based on the way I'm importing them) based upon what day it was/is in England (I  think it uses GMT when making the date classification)
    For me, it is also usually an annoyance, but sometimes it's more frustrating.  If I want my files named by date, correctly, then I have to re-name all the photos taken after 4:00 pm (16:00).
    Yes, my camera (7D) and computer (MacBook Pro) have their date and time settings correct.  (I tried changing the time zone my camera was set to to see if it changed the problem, and it didn't.  The Canon software is mis-placing the photos based on the date.)
    I might try this workflow on a Windows machine, and see if it persists.
    Anyone have any ideas?

  • How do I download /export my iPhotos to a memory card on my camera?

    I am trying to "organize" my camera memory cards, which I want use as a back up rather than just using external or USB drives. I can not find how to Export photos to a new memory card in my camera.
    The reason I want to do this is because when I've saved on a USB or External Drive, the photos are zipped, & then when I uploaded back to my mac (when I needed to get a new one), the dpi & KB is really low (270 x 360 & 54 KB compared to over 2000 x 1500 & 255 KB for recent photos!)
    The iPhoto help manuals & Apple site helps don't address this exporting, only how to export to Email & the web.
    I was told by someone USB & ED's "don't change the size" (it does zip them) & to increase the dpi & KB on those, just "double click" on each photo in the iPhoto app - didn't work! So any other better / real ideas how to increase the dpi/KB would be more than welcome, as I can't print any of my older photos, the size is too small!
    Mille Grazie, Gracias, Merci, Danka
    PS - My camera is a Canon Power Shot A590. Last time this was discussed was in 2006, & suggested to "buy a usb plug in card reader & drag photos ..."

    PS - My camera is a Canon Power Shot A590. Last time this was discussed was in 2006, & suggested to "buy a usb plug in card reader & drag photos ..."
    Still the answer since Canon Camera's will not mount to the desktop
    I am trying to "organize" my camera memory cards, which I want use as a back up rather than just using external or USB drives.
    Why? memory cards are not very reliable - using Time Machine and an external hard drive is a MUCH better way to backup - I run TM so I have hourly backups - do a daily bootable clone - ane I never have iPhoto delete my photos when I import them so I have the originals too - and if you really want a backup on your memory card this is the way to have one - do not delete when importing
    The reason I want to do this is because when I've saved on a USB or External Drive, the photos are zipped, & then when I uploaded back to my mac (when I needed to get a new one), the dpi & KB is really low (270 x 360 & 54 KB compared to over 2000 x 1500 & 255 KB for recent photos!)
    This is user error - not in any way a function of backing up to an external Drive - a properly done backup and restore gives you exactly what you had whe you did the backup - that is the whole purpose of a backup - and it works perfectly if done correctly
    I was told by someone USB & ED's "don't change the size" (it does zip them) & to increase the dpi & KB on those, just "double click" on each photo in the iPhoto app - didn't work! So any other better / real ideas how to increase the dpi/KB would be more than welcome, as I can't print any of my older photos, the size is too small
    this is a very cofussed set of statements
    1 - no backup "changes the size" of the photos - the entire purpose of a backup is to have an exact copy available in case of problems
    2 - Most backups do not zip photos - some do - zipping does not change the content when you unzip
    3 - DPI is not an atribute of a photo - it is a mathmatical caculation - dots (pixels) divided by inches - you do not have DPI until you have inches (either a display or a print)
    4 - the only way to "change" DPI is ot change inches - for a given photo the only way DPI can be increased is by printing a smaller photo - decreasing inches
    5 - the KB of a photo is not material - the only things that is interesting is the pixel dimensions - and you can not make them larger
    Basically you are chasing the wrong things - buy an external drive formatted Mac OS extended that is 2 1/2 times the size of your main drive and run Time Mahcine all the time with its default settings
    LN

  • HP Envy Touchsmart 15-J104sa Memory Card Reader not working

    I took delivery of an HP Envy Touchsmart 15-J104sa running Windows 8.1 this week and the internal memory card reader isn't working. It doesn't recognise any SD cards (I've tried more than one) and continues as if nothing has been inserted; showing no error messages. All of the cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver update software (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) every time an SD card is inserted; this must be done with the card in the reader. If the software is run and then the card is inserted nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it isn't recognised and the process has to be restarted and the driver reinstalled even though nothing has changed.
    Can somebody please help me with this issue or I will have to return the laptop to HP. I do a lot of photography so being able to read an SD card quickly and reliably is extremely important for me; it's not a problem I expected from a brand new laptop straight out of the box.
    Thank you all.
    This question was solved.
    View Solution.

    Unfortunately non of the driver updates solved the problem but a BIOS update through the HP Support application seems to have remedied the issue. Whilst I appreciate there were no specific drivers available I find it hard to accept that HP should be able to release a model where they know the hardware will not be fully supported by the OS and in this case not function.

  • USB memory card reader not working since latest security update

    Hi, I have an iApp CR-e500 multi-format memory card reader; worked great prior to the latest security update. Now every time I plug it in I get the following errors in the console:
    Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.818 AppleUSBEHCI[0x1b4d800]::Found a transaction past the completion deadline on bus 91, timing out!
    Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.826 AppleUSBEHCI[0x1b4d800]::DoIOTransfer - error 0xe000404f queueing request
    The reader works fine on my office Windows laptop and my USB pendrive still works on my Mac, so the USB ports appear to be functional; they just don't like this thing anymore.
    Was there a USB driver change? If so is there anything I can do to sort this? I suppose I could just buy a new card reader if someone can confirm one that works with the latest security update of 10.4.11, that would be great.
    Alternatively if Apple could please loosen up whatever they tightened in their USB drivers that would be nice as well...

    Disregard. Looks like it's the memory card I'm trying to mount; not working on the Windows machine either.
    Sorry!

Maybe you are looking for