Changing Message Properties

Hi
Is it possible to change the properties of a message in a queue so that it becomes eligible to be received by a queue receiver (with message selector). ??
If yes please explain How to achieve this ??
thanks
Puneet

aside from the standard message headers, you can describe your own properties. similar to a key/value based hashmap.
for example. in the sender
message.setProperty("USER_ID", "JOE_DYNAMO");
and in the receiver
message.getProperty("USER__ID");

Similar Messages

  • Change display properties of mailbox

    I have created a mailbox in "On my Mac"
    The mailbox names are "sent 2010", " sent 2011", etc
    Here i am copying the mail from the sent items folder based on the date they were sent to the respective mailbox.
    Now here come the problem when i view this mailbox on the "On my Mac" area it displays mail based on the "sender" ( which in this case would always be me)
    How can i change the properties so that the message list is displayed with the recipient.
    This is the way it is displayed in the sent times folder.. How can i do this for folders on my mac since by defaluth they display the list of email based on the from address.
    i spoke to apple support chat who told me at the moment the feature is not available and i should post a feedback for them to add this feature.
    I think the community here could have some answers for me
    Vikas
    P.S please find here the chat i had with the apple care chat
    Now chatting with Kristopher, case # 782146853
    KristopherThanks for contacting AppleCare chat support. My name is Kristopher. Please give me a moment to look over your information.
    Me:Hello
    KristopherHello Vikas! How may I assist you today?
    Me:I have created mailbox on apple mail in the"on my mac" reagion marked sent 2010,sent 2011 and copy all the mails from the sent item based on their date in these mailboxes
    Me:the problem is when i view these mailboxes in the "on my mac" reagion they are viewed from the sender( which in this case is always me"
    Me:how can i change the view mode from sender to the TO or reciever feils
    Me:field
    KristopherOk Vikas, so we are trying to get the emails that have been saved to the Mac to sort based on the receiver field, is that correct?
    Me:yes
    Me:not really sort i need them to be sorted by date but i want them to display the reciver field instead of the sender field
    Me:like they do in the sent item mailbox
    KristopherAlright Vikas, we can definitely take a look to see if we can get this option changed for you. Please give me just a few moments to look into the matter to see if we have a simple solution for this.
    Me:sure
    KristopherOk VIkas, from what I can tell this is the normal behavior for the app, as the mailbox is going to show who the message is From, and since the messages are being moved from the Sent folder, all of the messages will be From your email account. Have the messages ever appeared with a header from the receiver?
    Me:no
    Me:but thats exactly the point can i not simply customize the display fields of a specific mailbox teh way i intend to use it
    Me:if the mails in these mailboxes are sent mails it makes no sense for me to see the sender info... i need to see thd receivers info there for it to be useful
    Me:i would prefer not to leave sent mail in the sent item folder because they seem to disappear if we ever delete the email account.
    KristopherI can understand that, but at this time there is no way to change the individual characteristics of the folders in the On My Mac section, and by Default they are set for holding emails you receive, so they will show the Sender’s name. The best option at this time would be to submit feedback for our engineering team to add this feature, through the feedback tool at www.apple.com/feedback, or look into a 3rd party Mail application who may have the feature already included.
    Me:ok thank you
    KristopherYou’re welcome Vikas. Is there anything else I can assist you with today?
    Me:no that is it, thank you for your help

    Hello Eric thank you for answering,
    Please see again what you are proposing is the way the mails are "Sorted" and not the way they are "displayed".
    These are 2 different things.
    What i was asking is for them to be displayed(listed) based on the recipient( like they are in the sent folder). Sorting can be done the way the user likes.
    Even if i do what you have suggested they will still be displayed( listed ) with all from them being listed from the same sender .
    The Sent items folder should be displayed based on the recipient. When you are viewing sent mail what you want to see id whom you have sent the mail to. Displaying that all the mail were sent by you Is mostly useless unless you want to sort out the if you are sending mails from multiple account.
    I hope you understand the problem i an seeking solutions for and are able to suggest some solution.
    Vikas

  • Problems for change the properties for Primitive shapes?

    Is there a way to change the properties of Cylinder, Sphere, Cone and Box primitives (com.sun.j3d.utils.geometry.Primitive)?
    ie. can you change the radius, height, width, etc after you've already
    created this object to the scene?
    Thanks for any help!

    Hi Anil,
    I did modify the property "SLD.selfregistration.hostName" to a fully qualified domain name, (i.e. fgsappitd.fourlis.net), as mentioned in sap note 804124 (performed also the stop and start of applications mentioned in the sap note. However, I still get the error message, whenever I activate my changes in the Integration Directory,
    "Unable to notify Adapter Engine 'af.fpd.fgsappitd' that is affected by the data changes
    HTTP connection to 'http://fgsappitd:50300/CPACache/invalidate' returns the status code '403' (Forbidden) in response"
    It is strange because although I entered the full qualified host name, the error message still shows, in the message above, only the host name.
    Just to mention here that when I open an interner browser and run URL 'http://fgsappitd:50300/CPACache/invalidate'  it fails. If on the other hand, I open an internet browser an run URL 'http://fgsappitd.fourlis.net:50300/CPACache/invalidate' , it works OK. Therefore, I believe,  the problem I get has to do with the missing full qualified host name.
    Is there something else I need to do? Do I have to restart the system?
    Thanks,
    Filippos

  • My ipod works in itunes but does not appear in "my computer" after I changed the properties

    My ipod works in itunes but does not appear in "my computer" after I changed the properties.
    First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
    showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
    chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
    no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
    or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
    Any help would be very much appreciated. Thanks.

    Hi,
    To show up in Windows Explorer, you can try placing the iPod into
    disk mode.
    Moreover, i recommend you to
    restore ipod to factory settings.
    If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
    Here is an article you can refer to below:
    http://support.apple.com/kb/TS1369
    To get more help, you can also redirect to apple support forum:
    http://www.apple.com/support/ipod/
    Thanks!
    Andy Altmann
    TechNet Community Support

  • Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

    Hello, dear Colleagues.
    User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2. 
    If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below). 
    But I can change it manually with "Print Management". Features become active.
    The main purpose - to uncheck "Enable advanced printing features"  with powershell
    scripts.
    $erroractionpreference = "continue"
    $colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
    ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
    If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
    Write-host $objPrinter.Name
    Write-Host $objPrinter.RawOnly
    $objPrinter.RawOnly = "True" # Untick and update the object in WMI
    $objPrinter.Put()
    It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
    Exception calling "Put" with "0" argument(s): "Generic failure "
    At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
    + $objPrinter.Put()
    + ~~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : DotNetMethodException
    Can you help me with that? Look like somethings with rights.
    Thank you.

    Hello, Alan
    Morris.
    Thanks for your reply.
    I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
    I've noticed interesting thing - if to
    check "Enable advanced printing features"
    manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
    feature manually again (thru Print Management snap-in),
    and enable manually again, PS Script will work. Very strange situation.
    Thanks.

  • How to change the properties of a directory using java code

    Hai All,
    I need to change the properties of directory( websharing).
    Can i do this using java code.
    Regards,
    Charan

    I need to change the properties of
    directory( websharing).
    an i do this using java code.Depends on whether the server has a Java API to do it. Most likely it hasn't.

  • SOAP Use Adapter-Specific Message Properties and Variable Transport Binding

    Hi Friends,
       I am new to use to Soap Adapter. Please help me out bellow doubts.
       1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
       2. Where exactly  we r using below parameters.
    Remote User : (technical name: SRemoteUser )
    Remote Host : (technical name: SRemoteHost )
    SOAP Action (technical name: SHeaderSOAPACTION )
    To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
    Variable Header : (technical name: XHeaderName1 )
    Variable Header : (technical name: XHeaderName2 )
    Variable Header : (technical name: XHeaderName3 )
    Thanks&Regards
    G.Bhanuprakash

    Hi,
       1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
    SAP Help says both are needed to be checked when you want to process adapter attributes
    Configuring the Receiver SOAP Adapter - SAP NetWeaver Exchange Infrastructure - SAP Library
    These attributes can be get/set using dynamic configuration and their technical names are what you have pasted:
    Remote User : (technical name: SRemoteUser )
    Remote Host : (technical name: SRemoteHost )
    SOAP Action (technical name: SHeaderSOAPACTION )
    To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
    Variable Header : (technical name: XHeaderName1 )
    Variable Header : (technical name: XHeaderName2 )
    Variable Header : (technical name: XHeaderName3 )
    Remote User - the username used to send a message to the adapter engine using SOAP
    Remote Host - hostname which the remote user used
    SOAP Action - SOAP Action of the XI webservice (sender) / SOAP Action of the receiver webservice
    Variable Headers are additional key-value pairs in the HTTP Header that could be accessed in the XI Header using dynamic configuration. The limit is only three though.
    Regards,
    Mark

  • How to change shape properties after having created one?

    Photoshop CC 2014 -- latest update as of October 06, 2014
    Windows 7
    How can I change a shapes properties after having created one.
    I have created a simple ellipse.
    When I drew the ellipse with the tool, I had the option for the fill color/style and stroke, etc.
    After I have created said ellipse, I wish to change its properties.
    I can use the Paint Bucket, gradient tool, etc for the fill, but is there way to get back to the original set of tools with which I created the ellipse in the first place?
    If I use Edit > Stroke... it adds a new stroke around the existing shape.
    If I use Edit > Fill... the entire layer is filled.
    There must surely be a way to reenter the tool set to edit an existing shape. No?
    Thanks,

    Hi everyone,
    Thanks for the helpful tips, advice, etc.
    I didn't explain myself very well--I apologize.
    However, with your tips I figured it out:
    When I create a rectangle or ellipse, I can later click on its layer and the Properties window appears with options to change their "Live Shape Properties."
    However, not so with the Polygon and Shape tools. With them, the Properties window shows only the Masks, but the Toolbar still shows some basic properties I can change.
    I was stymied by the above differences while working only on a Shape.
    I've attached two JPEG screenshots.
    I didn't need to change the actual shape, just the fill/stroke, etc.
    Later, I may wish to change the actual shape, but that appears to be done by simply creating something new.
    Thanks much!!

  • "Click To Change All Properties" Not Working In Dreamweaver CC For Padding/Margins

    Every time I try to use the "Click To Change All Properties" option in Dreamweaver CC (the chain link icon in the middle of the Magin/Padding box), it never seems to work. Nor does it use the CSS shorthand, it lists the top, bottom, left and right margins/padding separately no matter if I have the chain link icon connected or broken.  If I have it set to link all four sides, then enter a value into the top, nothing happens to the other sides. It's not until I enter a value in to the bottom that it auto fills in the other two sides. Anyone else having this issue?

    Thank you for your help. I think I figured out what I might have been doing wrong when setting the margins. I would first clickt the chain icon to join everything, then enter in a value in the Top box, but I wouldn't see the other boxes update with that same value, so I would immediately click the Bottom value box. Instead, if I just click on the inner white box, just outside of the perimeter of the chain icon, it updates all of the remaining values.
    The shorthand setting worked as well for the Padding/Margins. Thank you!

  • Change Message Control for Customer Master data

    Hi Friends,
    I have to choose/populate a message when the user is about to create an already existing customer.
    In SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for creating customer master data --> "change message control for customer master data" ...
    OK...
    When u click this it goes into Change View "message control by User" Overview screen wherein u can insert new messages and texts and the type of message ....
    Now .....
    I want to display the 145th message (F4 help of the Message column) ..... it picks up the text "Customer found with same address;check"..... with Online mesasage type 'I' and batch type 'I' and with standard type '-' ..
    I want to have the same message with message types 'E','E', and 'I' respectively.......
    How is this possible (or) what should i do to meet my requirement :-|
    Expecting ur answers
    Thanks in advance ........
    Cheers,
    R.Kripa.

    Hey yes it is not possible (as of now
    I ve met the requirement by just using message statement in the program itself ............
    My requirement is met but still if anyone knows about this do answer / reply
    Thanks
    Cheers,
    R.Kripa.

  • How to change the properties of individulal elements in an array?

    Hi all,
    I have an array (size is 25) of string and I want to disable and grayout half of them. But how do I do it? How do I change the properties of individual elements in an array? I have tried to use some of the examples given in the discussion forums, but it didint work for the task mentioned above. Anybody would be able to help me with a suitable example that can be specifically used for disable or enable the individual array  elements?
    Dev

    Telemaque wrote:
    The user will see the first half of the string elements filled-in and the lower half grayed-out (to be filled in later).  Make a test VI, play around.
    ... except that all elements "greyed out" with this method contain the default string for the array element (blank by default, but changeable). There is no way to have meaningful, unique text in the greyed out elements.
    I would suggest to use a listbox as control/indicator. Here elements can easily be disabled programmatically.
    LabVIEW Champion . Do more with less code and in less time .

  • Adapter Specific Message Properties not available in SP 15

    Hi
    In the <b>/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 blog Michal is saying that <b>Adapter Specific Message Properties </b> option in File adapter  will be avalible from XI with SP 14. But i am using SP 15 and i am not getting this option in the file to file adapter. Can u please tell me the why its not available.
    Thank & Regards
    Ravi Shankar B

    Hi,
    Try reloading SAP BASIS software component version of SP15 only (check ) into repository.This might enable that option in the ftp/file adapter.
    also see the below links
    /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
    /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
    /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
    Regards
    Chilla

  • How to use Prompts in the Filter created in Change Report Properties

    Hi all,
    I have created one Datetime prompt in Change report properties dialogue box.
    Now how can I use this same one in the filter ??
    Since I didn't get Surface and Prompt option for the Date field in the filter.
    Any help is appreciated.
    Thanks

    Actually problem is with Datatype..It was timestamp but it should be Datetime

  • Can't change Movie Properties

    I just bought and downloaded 5 Pixar short subject movies.
    I have a 3 year old grandson that I've set up a Mac for.
    I've put his favorite movies and trailers on the desktop with large icons and slow double click. I set each movie to open in full screen and close when finished because he can't click on the red close button.
    The Pixar movies downloaded into iTunes, so it would be difficult for him to find them to play.
    I opened the mp4 in Quicktime and saved as self-contained movie, thinking this would do it. I put the movie on the desktop and opened it to get movie properties. I could not change them, so I can't set to go full screen or to close the movie when done. ???
    Is there no way to do this? "Protected" is one thing... but not being able to change the properties seems ridiculous.
    RM

    Better to use "reference" instead of "self contained" to save on HD space.
    Then unplug the mouse and teach the 3 year old the keyboard.
    The "Tab" key will highlight a file and a new tap on it will move the focus to a new item.
    Command key and the letter o key will launch QuickTime Player.
    Command key and the letter f will send the file to Full Screen (requires Pro).
    The Spacebar will start and stop playback. Up/down arrow keys will adjust volume.
    Command key and the letter w key will close the window. Escape key will send it out of full screen but leave the window open.
    Command key and the Tab key will allow switching between the Finder and QuickTime (focus changes each time the Tab key is clicked) and releasing the Command key will make that app the "front".

  • Cannot change Printer Properties in Word 2010 with J6480. Properties revert to default setting

    When I attempt to change Printer Properties in Word 2010, they simply revert back to the default setting.  I am unable to use the Printer Properties within the Word 2010.  If the default is grayscale, that is all the printer will print unless I change the default setup in the Control Panel. It appears to be an incompatibility with Office 2010 software as other programs allow the change of Printer properties.

    I have the exact identical problem.  Brand new printer (HP PhotoSmart C4780) on a brand new PC (Windows 7).  I cannot access the printer properties dialog box when the PDF file has been opened in an embedded Adobe Viewer window in Internet Explorer.
    When I select [Print] from Word or Adobe Viewer, or anywhere else, I can then press the [Properties] button and it opens the printer properties just fine.
    But if I open a PDF document through Internet Explorer, clicking on that [Properties] button doesn't do anything.  No error or anything.  If I press the [Save] in the Adobe Acrobet-embedded Internet Explorer window, it too does nothing.  This leads me to think it is an Adobe Acrobat issue.  However, I have found nothing in their support forums on this topic.
    Does anyone out there have any ideas?
    Scott

Maybe you are looking for