Changing message type is standard program

Hi all
In transaction cs02 I m getting a warning message "Enter Change number-BOM has History requirement".
Instead of warning I want it as a Error message. Can anybody tell me how to do that

my dear no matter that in which forum it is belongs to.
I mean to say my problem, just want to know how to
change message type....

Similar Messages

Change Output format of standard program RFSZIS00

Hi All,
I want to change output format of standard program RFSZIS00 for this i copied this into Z program but i am not able to
find out where final output table is populating because that program is not using any final internal table it's using EXRACT and
another thing is all discription for field has given in German Language.
It's a clasical report not an ALV.
Edited by: Raj Singh on Jul 3, 2009 11:03 AM

Dear Raj,
as per the report mentioned by you, it is calling some subroutine to display the details.
Just try to trace the WRITE statements and check if you can add your own include in this report to display the output as per your requirement.
Regds,
Anil

Change message type property of message in Orchestration

Can we change the message type property of message in Orchestration ?
I tried to change the message type property of message in Orchestration(in expression shape) as follows:
MessageName(BTS.MessageType)="20";
But admin console showed the error that it is read only property.
How we can change it ?
Prakash

No you can't change the message type context property. If you have some process which is depend on message type value, then construct a new message whose targetnamespace and rootelement matches to the value which you want to set. With something like..
create a completely new schema with the fields/ data structure same as the one where you want to change the message type
Set the newly created schema's target namespace and rootelement to the one which you want to change. For example if you want to change the message type values as
http://samenamespace#sampleRootElement, then set the target namespace of the newly created schema as "http://samenamespace" and its root element
as "sampleRootElement"
Then construct this new message from old message using message assignment shape or transformation using map. This way the newly contricted message will have the message type value as want you want to change. This is the only way.
Moreover you can't set the message type value as "20" as you have shown, its targetNamespace#rootelement of the schema, not any custom value. If you have any process which depends on this custom value assign this value to a custom context property
using property schema.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Printing the form using output type and Standard program

Hi all,
   I am a beginner on SAP.Now i get a doc for smartforms.
   It need to print a form.And need to create a output.I don't know how to create it and how to use it.
   And how to use the standard program to print the smartfroms.
   Can you give me a thought about that??

Hi steven,
first u copy the standard form and modify as u required.
copy the print program.
after that assign modify form to modified print program using NACE transaction code.
NACE->slect application->go with output types->select suitable one->go with processing routines->select medium->provide modified program name and form name->save the details.
go for view->go for transport.
go with the appropriate transaction suitable to your application.
and provide one existing record->issue out put->go with print
i think it will useful for you.
Reward points if useful.
Thanks,
Usha

How do you change message type linked to partner in WE20?

Good Morning,
May please have a piece of info about this subject:
In we20 (partner Profiles) i can see that a partner of type LS (Logical System)
has, as Outbound parameters, the CRMXIF_PARTNER_SAVE Message type.
I want to change that to CRMXIF_PARTNER_SAVE_M Message type and also add another Message type, that is to say CRMXIF_PARTNER_REL_SAVE_M.
Notwithstanding, I am not able to edit the grid.
Am I lacking any of the authorizations? Or is it the wrong place to do that?
Thank you very much
Riccardo

<i>Hai,
you can open tcode we20 and make it in edit mode or other wise you can add a outbound parameter using the add button shown bellow the outbound parameter grid.
regards,
Gopinathan.
</i>
Hello,
this seems the right direction.
Yet, in my right - click menu, I have these choices:
- Help
- Choose
- Back
- Display
- Cancel
- Exit
- Check
- IDoc Output
- Tree output
- Position
- Expand subtree
- Collapse subtree
In the "Edit" menu I have
- Position
- Expand subtree
- Collapse subtree
If I click on "position", I just have a "choose partner" window, but then I do not have the "choose message type" or anything that helps me choose the messages...
Does this mean I am lacking any authorizations?
thanks a lot, Riccardo

How to change the display in standard program.."SAPLCKML_MR11_ALV"

hi....
one of the report of finance (SAPRCKMR11) is calling this program SAPLCKML_MR11_ALV ..for the display...
i had to add three more fields in the display...
1) PO quantity    ekpo-menge
2) PO value         ekpo-netwr
3) INCOTERM     ekpo-inco1.
i had try to modify the standard program by copying it...but didnt getting the result.
please help me .... how to meet the requirement..... if u can tell please also tell me where in the program i have to do the changes...
any suggestion is appreciable..
thanks

Purchase Order Quantity and price......If you get an answer please advise.
Thanks
Justin

Change message types in Code Inspector

Hi,
Can anyone let me know how to change the message type in the code inspector results ?
I want to change the message type from warning to error or vice-versa. I looked for the classes but could not figure out the exact class and the process to do so.
Any help is much appriciated.
Thanks,
Vinod

There are certain options to supress error messages. You can find more information by clicking the 'i' button type being displayed in the code inspector results page. Here are some of the options,
1. ("#EC *) exculdes error messages regarding the current ABAP command
2. ("#EC NOTEXT) indicates that a string does not have to be stored as a text element
3. ("#EC CALLED) indicates that a FORM has a PERFORM call
4. ("#EC NEEDED) - no messages are output about a field that is only read
5. ("#EC PORTABLE) turns off the ASCII/EBCDIC test
6. ("#EC NOBREAK) - no messages are sent at BREAK-POINTs
7. ("#EC TRANSLANG) specifies that the use of TOUPPER or TOLOWER is also safe in multilingual systems.
8. ("#EC SYNTCHAR) specifies that the data TOUPPER or TOLOWER is used on contains only characters from the syntactical character set.
One example given there..
DATA: I TYPE I. "#EC NEEDED
I = 4.
BREAK-POINT.    "#EC NOBREAK
WRITE 'Hugo'.   "#EC NOTEXT
IF 'a' < 'c'.   "#EC PORTABLE
ENDIF.
FORM AB.        "#EC CALLED
ENDFORM.
Hope this helps.
Regards,
Susanta

To find error message in the standard program sapmv45a

Hi friends,
I have a following senario.
Iam getting the following error mesage.
INFO RECORD FOR VENDOR 'ABC' AND MATERIAL '00000678' DOES NOT EXIST.
now my requirment is i should find from were this error message is being triggered.
actualy my problem is its in production server i dont have the acess to debug it.
even i dont have the mesage classs and mesage number also.
How can i catch this error mesasge from the program code
ie : by checking the code of the program SAPMV45A
Regards
Priyanka.

I got that mesage from ME13 tcode.
now my requirement is
in the line item i have material number '000000678'.
now the end user is chaning tht material number ie : he is chaning from '000000678' to ' 000000600'.
now for the ist material 000000678' the info record is maintained .
but for the changed material 000000600' the info record is not maintained. so iam getting the error mesage as below.
INFO RECORD FOR VENDOR 'ABC' AND MATERIAL '000000600' DOES NOT EXIST.
Now my reuiremnt is i should skip this error mesage even when the material is changed ( ie if the info record is not maintained ) .
ie : it sholud allow me to process the flow of va01 tcode
How can i do that.
or is there any other solution for that.
Regards,
priyanka.

Message type BOMMAT (change BOM)

Hello Guru,
I have some question and need help, when i try a standard transaction CS02, try to change a BOM material existing for example, the base quantity of the BOM was 650, i enter new data as 655, but suddenly retain the original Qty as 650 and save the changes as SAP will accept the changes i've done (BOM for material 2456 changed) but eventual i have not change any value to the original BOM. SO it mean this is standard SAP funtionality for CS02.
But when we use an interface using message type BOMMAT a standard SAP message tpye, we have created an IDOC using this message type and same data as the original was maintain to it, to be more exact we plan to change a BOM thru this IDOC but all the data we have is the same value of the original BOM, so we expect no error could be encounter of this IDOC since in standard CS02, changing of BOM even same value was inidicated did not had error message encountered when saving.
But thru our process, when we try to process the IDOC with message type BOMMAT in program RBDAPP01 (BD20) the idoc did not pass it when into status 51(Error when saving BOM. Please see the application log.) and when we check the BOM it has duplicate value upon executing the program we able to fix it when we delete the duplicate line segment in the IDOC and reprocess it once again.
my question is why in standard message type BOMMAT had encountered error when processing when we try to make change of BOM even the same value is carried out by the IDOC, and why in standard CS02 saving a change of BOm with same value as it is SAP accept the process? Please help and clear the process.
Any inputs R.Brahamankar and Vivek
Thanks
Edited by: Ryan on Feb 9, 2009 9:23 AM

BOMMAT and process code BOMM

How to change P.O. duplication message type from warning to error for Order

Hi Experts,
I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate. I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType). If this BAdI is not good way, is there other way? and how to please?
Please advise / help..
Thanks, Jin

Thanks Easwer for your help.
The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much. I need to learn where I can see the system status of the template, i.e. I1034 (Order Template) or Order or Quotation .....? if I need to filter out Quotation, I can easily do it in the BAdI. Could you please provide me more details?
Thanks again, Jin
Thanks again, Jin

How to chang message "W" to "E"

Dear all,
During creating Delivery for sales order, I am facing the following waring message.
Delivery quantity must be entered for the item
Message no. VL361
Diagnosis
The delivery quantity must be greater than zero, as defined in Customizing for the item category of this delivery item.
Procedure
Enter a quantity greater than zero in delivery processing.
Should this error message appear when you are confirming a WMS transfer order that you want to close with a quantity of zero, it could be that the delivery item does not allow a quantity of zero. If necessary, ask the person responsible for Customizing if this is intentional. If so, you cannot confirm the transfer order with a quantity of zero.
I hope the message is eror.
How to chang message "W" to "E"?
colin

Hi
SAP has given some messages which can be converted from waring to error and vice versa thro customization
All that SD related messages which is offered by standard SAP you can find in OVAH and OVM1
your message VL361 will not be there in OVM1 which means that standard SAP has hardcoded this message type thro its program and not available for customization
Go to SE91 and do the following:-
input VL in Message Class
input 361 in Number and execute.
select the message number and click on "Where-Used List" (press Cntrl + Shift + F3)
Deselect all boxes excepting "Programs"
List of programs will be displayed where this error message is used
Double click on the description in right side of the screen
You can see the codings written for the error message as W361 which may be changed to E361.
This is a modification of the codings of the standard program which standard SAP does not recommand and if still you want to go with it it needs to be done thro ABAPer which will ask for developer access key etc
Regards
Raja

File to IDOC mapping - Message Type WMMBXY

Hi
   I am working on FILE to IDOC Scenario. I have records like the following in my file:
301 ABC455559 03.11.2009 02u0391B13 01     OBAF515150 G378378 15 PC   20090311 MIGO
301 ABC455560 03.11.2009 02u0391B13 01     OBMN515040 437482 50 PC   20090311 MIGO
Using an ABAP Program I added DTL in front of every record as I have to convert text file to XML mapping.
DTL 301 ABC455559 03.11.2009 02u0391B13 01     OBAF515150 G378378 15 PC   20090311 MIGO
DTL 301 ABC455560 03.11.2009 02u0391B13 01     OBMN515040 437482 50 PC   20090311 MIGO
When I did this my mapping is fine from source side. For the above two records there are two records created in xml format. But only one record is created at target side. I changed message type WMMBXY to unbounded in the external message but still only one idoc is created.
Please let me know if anyone faced the same issue.
Thanks
Naga

1..Please mapping ur sorce node (has occurance 0..unbound) with target node.
2...change occurance in message tag in mapping for IDOC message
3...change occurance in message mapping for IDOC message
Regards,
Manisha

How to create a message type

Hi, All
I need to create a message type, Enter the fields change pointers eligible for key changer in this message type. Extract program needs to be created and this program accesses the key changer fields status and the changed values on day to day basis for the message type using tables BDCPS & BDCPV.
Can any one tell me how to do this.
Many Thanks.

Hello siri
I think if you talking with respect to ALE/IDOC or EDI/IDOC..........this posting has to be entered in data transfer.........................and you can create message type using trasaction we81.
Vj

Change detector failed while scanning for changes to type User

I'm receiving lots of system log warnings in IdM.
These warnings are not bound to any particular action in IdM, they just do appear while IdM is on.
Almost one warning per one second.
Change detector failed while scanning for changes to type Server
Change detector failed while scanning for changes to type UserForm
Change detector failed while scanning for changes to type User
Change detector failed while scanning for changes to type Resource
SysLog detail:
Timestamp 123
Event
Server server11
Severity Warning
Component Repository
Error Code OCDT00
Message Change detector failed while scanning for changes to type User
Reported cause java.lang.NullPointerException
java.lang.NullPointerException
at com.waveset.repository.ObjectChange.equals(ObjectChange.java:112)
at java.util.HashMap.eq(HashMap.java:299)
at java.util.HashMap.containsKey(HashMap.java:381)
at java.util.HashSet.contains(HashSet.java:182)
at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.dispatchChanges(ObjectChangeManager.java:398)
at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.run(ObjectChangeManager.java:314)
at java.util.TimerThread.mainLoop(Timer.java:512)
at java.util.TimerThread.run(Timer.java:462)

same here, just deployed 8.1 with oracle as db. It results in syslog table growing into 10+G and still growing.
wonder if there are others who are seeing this.
my "syslog -d 1" output looks like this...
2009-12-02 04:52:55.972 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Account
2009-12-02 04:53:06.400 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Server
2009-12-02 04:53:06.578 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type User
2009-12-02 04:53:06.914 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Account
2009-12-02 04:53:17.479 null W xxx RP OCDT00 Change
detector failed while scanning for changes to type Server
C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.18\webapps\ims\bin
lh syslog -d 1

ALE message type WMTORD sending ST meins

good morning/afternoon to all,
we are in the process of setting up a 3rd party warehouse/miniload system and they connect using ALE. the 3rd party system is not a SAP system. our system is 4.7C. we are being asked to use this message type (WMTORD - standard) to send transport orders. they receive the idoc successfully with correct information, except for the unit of measure field meins. they receive the untranslated unit of measure ST, instead of EA.
is there a fix for this? can this be changed with standard code, or is a user exit needed. and, if the user exit is needed, why does for example the message type MATMAS send a EA and not the ST? i do have the global unit or measure ST setup to send EA in spro.
thanks in advance.

it looks like no one knows the answer...
here is what i found (for future reference)
enhancement MWMIDO01
component(fm) - EXIT_SAPLLIDO_001
include - ZXLIDU01
code example
tables: e1ltori.
loop at t_idoc_data.
if t_idoc_data-segnam = 'E1LTORI'.
    move t_idoc_data-sdata to e1ltori.
    if e1ltori-meins = 'ST'.
      move 'EA' to e1ltori-meins.
    endif.
    move e1ltori to t_idoc_data-sdata.
    modify t_idoc_data.
endif.
endloop.
*****solved*****

Changing message type is standard program

Similar Messages

Maybe you are looking for