Changing Meta Tags and description on SWF

Hey guys. I bought a template, made some changes, published it and upload it on FTP. But each time I do a search, one one the search results is one of the orignal page names. Any tips on how to change it?

Hi,
I found this threat about Meta Tags in SWF Files in this Actionscript Forum.
Check out this link, some guys tell you how to do it here:
http://www.actionscript.org/forums/showthread.php3?t=15166
Hope this information helps,
Vicente Tulliano

Similar Messages

How can I check if there are meta tags and description tags for my pages on website?

I want to check if the pages on my website have keywords or meta tags and description. How can I do that?

In Contribute, Edit the Page and the click on Format, Keywords and Descriptions.

Help on meta tag and pagr description

how / where to write meta tag and page descriptions on
dreamwaver 8
i'm currently can't find where to write down my key words and
descriptions on the meta tag and page description place on
dreamwave . please advise step by step as i'm a beginner
thanks in advance
you can e-mail me at : [email protected]

The code you show *already* has a keywords and description
META tag in
place. So - what is your question? You would either modify
the currently
existing ones or replace them with new ones. And the keywords
meta is
pretty useless as has already been suggested.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Mostafa Mosbah" <[email protected]> wrote
in message
news:ghttgr$nbf$[email protected]..
> its okay i understand the real benefits of key words and
page description
> , but
> my question is regarding where to place my key words and
description on
> the
> page i'm designing on dreamwaver 8
> i have seen a website that shows this :
> <HEAD>
> <TITLE>This is the Web Page Title. This will
appear on your
> SearchSight.com
> Listing</TITLE>
> <META name="description" content="This is where you
place your web page's
> description. This will appear on your SearchSight.com
listing.">
> <META name="keywords" content="place, your, keywords,
here, separated, by,
> commas">
> </HEAD>
>
> but i don't know where to find them on my page i'm
designing now
>
> thanks in advance
>

Iport of photos from Picasa breaks all tags and descriptions

Since 2003 I have managed all of my photos with Picasa on my PC, I have added keywords and descriptions to the photos. This is stored in the photos and is recognized without any problem by, for an example, Flickr.
I transferred all of my photos to my mac and imported them into iPhoto. The import itself went by without any problem at all. I was happy until I discovered that all å, ä and ö had been changed into other letters. I really wouldn't want to manually edit the tags and descriptions of more than 5000 photos just because iPhoto isn't able to read data that already is there (other services can read it without any problem at all).
How can I get iPhoto to recognize the tags in a correct way?

Usually I'm using English, but the behavior is the same no matter what language I use on my Mac.
Regards
Kristoffer

Meta tags or descriptions

Are Meta tags or descriptions the best way for your website to get picked up by Google, Bing, & Yahoo? Or do you have to pay them for better results? Thanks!

Since some months I use "Dublin Core Metadata".
Here the link: http://www.metatags.info/dublin_core_metadata_element_set
On the other hand – what concerns "Olde Worlde Lace's “that neither it nor this forum say much about“ there was a very interesting thread here in the forum about SEO, which I remember.
1) Fully understand your markup language.
2) Work first BEFORE anything on CONTENT not on black hat "tricks" and or on white hat inbound links.
3) Expand the content so that you become an authority on the subject of the keyword phrases you wish to appear well ranked for.
4a) Avoid the error of going all over the internet looking for the "ONE WAY TO SUCCESS" posts. There is NO such thing. Google does not rank all sites and blogs by the same values. Some are simply in the top ten for middle to complex keywords and keyword phrases because of their AGE and the AUTHORITY factor (that they contain original content with good outbound links WHILE OTHER BLOGS AND SITES are listed in the top ten ON REGIONAL search because of inbound links (example: You are better ranked on Google.FR if you have FRENCH blogs from FRENCH servers linking to you as well as being yourself hosted on a FRENCH dot fr domain or a in France hosted dot com). And there are certain pages which are ranked simply by the volume of search requests for that page. And then there are others which appear and remain in the top ten because they are rated by Google with what is called PageRank .... and on and on.
In other words before you end up getting depressed and giving in to purchasing Adwords (sponsored links) try the following:
4b) Set a routine. Make this routine involve an hour at least per day to UPDATING and EXPANDING your content. Use PDF files (learn how to optimize meta tags and onpage PDF alt text and Accessibility). Expand with images which have BEFORE YOU UPLOAD THEM been right clicked to add (on your computer) meta information to the image files. Make sure to name your image info TRUTHFULLY (Google can read the content of images) so do not call it PARIS HILTON and ME unless it is a photo of you and Paris. Use the "+" sign between keywords. Per example if indeed it is a picture of you with Paris Hilton in Saint Tropez in the summer of 2008 then you might wish to name the image: YourFullnameInOneword+ParisHilton+SaintTropez+France+2008.jpg - note that some image formats do not allow for meta tags. Also be aware that as soon as you start tagging your images these keywords will be READ BY THE ROBOTS as they crawl your markup - so DO NOT SPAM your image titles and have DIFFERENT image tittles. Also place your images in a 2 deep folder system on your server AND ALWAYS LINK TO THE IMAGE WITH THE FULL URI / URL.
4c) Next spend a few hours reading a good BOOK about SEO. There are several. The best I have found is by DAVID VINEY and called "Get to the Top on Google" (Published by Nicholas Brealey Publishing - London, Boston). This book will give you tips and techniques to get your site to the of the search engine rankings and stay there. Also read the archives of Vanessa Fox's Blog - www.ninebyblue.com/blog/ (HGD now > http://www.ninebyblue.com/blog/seo/).
5) Set your objective to 3 keywords or keyword phrases per page.
6) Start to NAME YOUR PAGES with your keywords and name your folders as well - but try to do this ALL in small letters with dashes between words.
7) Install Google Webmaster Tools.
8) Make and add a XML sitemap and update this on Google Webmaster Tools. (And get Google Analytics)
9) Start to seek IN THE TEXT BODY PageRank 5 and higher "follow links"
(see here info about NOFOLLOW links on Wikipedia: http://en.wikipedia.org/wiki/Nofollow).
10) Take a break and start again - the key to success is WORK. Nothing else will give you lasting success as honest effort.
11) ... and as Nancy O. said: only a short time ago: patience!
Hans-Günter

META TAGS? How do I change meta tags while designing my website in iweb?

META TAGS? How do I change meta tags while designing my website in iweb?

I've designed a new website using iWeb. (I'm a beginner and have never done this before.) I published it to MobileMe. The site is for a volunteer organization, which requires that all pictures and images have text tags. (For this purpose, I assume that's the same as Meta tags.) A rep at the local Apple store clued me into iWebSEO Tool ("SEO"). I used it successfully got all my pictures and images tagged, altho it was hard and took a few hours. This was two months ago. I checked my site earlier this week and all the tags have disappeared. I went back to SEO and all my original work was still there. So I hit re-apply and then saved and republished my site. Still no tags. I have several questions. Is this a regular problem with SEO? Do I have to do all the tags over again? Is there any easier solution? Is Apple going to improve iWeb so this is not a problem in the future? I'll appreciate any help I can get. Thanks.

"Share to Flickr" stopped transferring tags and descriptions from PSE10.

The "Share to Flickr" function suddenly stopped transferring tags and descriptions when uploading photos from PSE10. The only event that preceded this error was a prompt to "authorize" my Flickr account (when this prompt happens on occasion, I simply re-authorize my Flickr account and everything usually returns to normal).
Here is what I've tried so far, with various ordering of steps:
Preferences-Adobe Partner Services-Reset Accounts
Preferences-Adobe Partner Services-Clear Online Service Data
Preferences-Adobe Partner Services- Refresh
Deleting the cache folder found at: C:\Users\<username>\AppData\Roaming\Adobe\Online Services\Photoshop Elements 10.0.0\cache
Any other suggestions? My photos continue to upload and appear on Flickr, but the hours of time consuming effort I put into tagging and captioning my photos is no longer displayed on my Flickr page.
Thanks,
Garth

Hi,
I have tried using PSE 9 & PSE 10 - they both omit the tags when uploading the images to Flickr.
If I upload the same image directly to the Flickr page then the tags are copied.
I am beginning to think that the problem may lie in the Adobe uploader service. When you use PSE to share to Flickr, the images are sent to the Adobe uploader service which then passes them to Flickr. The same Adobe service is used by Lightroom and I believe that has an option to minimize the metadata. I'm wondering if the service has been changed to minimize the metadata by default but we don't have a way of changing the default.
I would be interested to hear if Jon can get it to work correctly on PSE - then I know whether to carry on looking or not. I'm sure that it will work on Lightroom.
I have downloaded the Flickr uploader tool and use drag & drop from PSE to the uploader. If you write the tags to the photos first, they are copied to Flickr.
Brian

Meta tags and describtion

Will it be SEO friendly if the meta tags and desribtion of the tablet and phone version are similar to the desktop version ?
Thank you

is it possible to take a page from the net e.g by saving site and importing it to iWeb for editing?
No.
http://homepage.mac.com/thgewecke/iwebdata.html

Meta tags and keywords.. what am I doing wrong?!

Hi there,
I apologise if this is the wrong place to post
I've been designing this website ( http://serenemind.com.au/ ) In Dreamweaver. I don't know if I've done the keywords / meta tag stuff right, it doesn't come up anywhere in google unless I type the exact URL
If someone could throw me a bone here I would greatly appriciate it
Thank you
Nick

nicknackhack wrote:
Hi there,
I apologise if this is the wrong place to post
I've been designing this website ( http://serenemind.com.au/ ) In Dreamweaver. I don't know if I've done the keywords / meta tag stuff right, it doesn't come up anywhere in google unless I type the exact URL
If someone could throw me a bone here I would greatly appriciate it
Thank you
Nick
How long has it been since you submitted the site to Google. It wont show up overnight. Might take a few days or a few weeks.
Also I see only one h3 tag on the page? Why no h1 or h2 tags. Spider sees these tags as more important.
Also depends what search term you are using - it shows up near the top in Google with these search phrases:
Healthy Mind Therapies Beacon Hill
Thought field therapy Beacon Hill
So not too bad.
Also your images have no alt="" tag. Google spider reads those so make the most of them. Try inserting your header.png in an <h1></h1> tag and then use some descriptive text on the alt tag(see below)
<h1><a href="http://www.serenemind.com.au"><img src="images/AHG_Web_header.png" width="700" height="200" border="0" alt="Insert some descriptive text about the site here"></a></h1>
You also need to get listed in as many good free web directories as possible. The more incoming links to your site the better Google will view it and might place it higher up the rankings.

Changing ID3 tags and replacing tra

I'm playing with my new Xtra and enjoying it. I will want to jigger many of the tags to organize the genres and artists better.
) The software stored the albums (as I requested) under Artist/Album. If I shift an album under a different artist name, I assume it will not automatically change the tags for the artist. (For instance, I have a few "Elvis Costello" and a few "Elvis Costello and the Imposters"... I want them all under the same artist name).
2) Can I change the basic tags (Artist, Album, Genre and even Track #) using Create MediaSource Organizer, or should I download a decent/free ID3 tag program recommended on various guru FAQs?
3) Here's my real question: Once I alter the tag on a track I've already loaded onto the player, I will want to replace it with the updated tags. If I re-transfer, will it overlay the tracks with the updated ones -- or will it create duplicates? Do I need to delete the album or tracks from my player before sending them back over?
Thanks
Michael

zmulls wrote:I figured the PC was easier to change tags. Just for the typing (!)
Well you can only edit tags using the PC. I meant with respect to which data source you use, the player itself (when connected to the PC) or the files on the PC's hard dri've.
The "move" would be just taking a subfolder ("album") and moving under a different "artist" folder -- in Explorer. I figured also that I'd still have to change the tags (the ripping program reads the tags and creates the directories, but I assumed the intelligence doesn't go another way).
Ah right. Yes, you have to change the tags themselves. It doesn't automatically realise the folder has changed, although you can get many programs which will use folder and filename data to generate the tag.
So I should grab a tagging program, and plan to "Delete From Player" and "Re-Transfer From PC." Not as bad as it sounds, as I can delete whole albums at once from the Player.
It's certainly the method I use. It really depends on what approach suits you.
I saw the list of tag programs on your FAQ -- are the "free" ones good enough? Is there a real advantage in the shareware or paid programs (other than the one you cite on Nomadsync).
I've never bought a tag editing program, and have used 2 or 3. I prefer overall though, but some don't like the UI. Best to check some out.
Nomadsync is listed in the programs to copy files. Remember that Nomadsync is not a tag editor, it's a program for copying files.

How to include Change Request Title and Description in Approval email

Trying to figure out how to include the title and description of a Change Request in the email that goes to the managers when they approve it. Below is what we have now in the email template.
Change request $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Id$: $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity'
SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$, created by $Context/Path[Relationship='WorkItem!System.WorkItemCreatedByUser' TypeConstraint='System!System.User']$?$DisplayName$?, requires your
approval.
You can complete this request by replying to this message with [Approved] or [Rejected] in your message body (note the brackets).
Alternatively, you can complete the request by looking up Review Activity $Context/Property[Type='WorkItem!System.WorkItem']/Id$ under the Activity Management views in the Service Manager Console and manually approving or rejecting it there.
This basically translates to:
Change request CR#: Test Change Request, created by TestUser1, requires your approval.
You can complete this request by replying to this message with [Approved] or [Rejected] in your message body (note the brackets).
Alternatively, you can complete the request by looking up Review Activity RA# under the Activity Management views in the Service Manager Console and manually approving or rejecting it there.
When I click on Insert, there is a huge list of items and sub-items with all kinds of properties and I don't know what to select.
The Targeted Class of the template is Activity

$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target'
TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$
This translates to the Title of the CR (given that the targeted activity is contained in a CR). Simply replace
Title with Description.
Also if the Change Manager can approve a CR just by the description you have bigger issues (or just putting everything in the description). What about a reason? Implementation
plan, rollback plan, testing, etc.?
http://codebeaver.blogspot.dk/

How do I change picture, author and description of new podcast submitted?

So I just submitted a new podcast, The Jay and Clay Show, and it was accepted by iTunes. However it has the wrong picture, author and description and I need to change it. Apple's technical support e-mail was not too helpful on this. Also I am not too knowledgeable about RSS feeds so if you could please explain the steps necessary to change this that would be great.
My RSS feed URL is: thejayandclayshow.wordpress.com/feed
and my URL is: thejayandclayshow.wordpress.com

You will need to enter the new name and category in the same places that you entered the current ones. However you need to check whether this will affect the feed URL: some services incorporate the title into the feed URL so changing the title would change that and iTunes would lose contact with the feed. If the feed URL doesn't contain the title you should be good to go. Exepct the Store to take a couple of days or so to update.

How to add meta tags and keywords, I cannot find a way to do that

Does somebody know how can I add content and keywords to my website dome with I web?
It seems it is important for search engines to find it!

Content is what you add to your page. The visible part your visitors can see.
Keywords have to be added with [a META tag in the HEAD|http://www.google.com/search?q=meta%20tag%20head] of the webpage. That cannot be done in iWeb. You have to edit the published pages with a HTML Editor of your choice.
It's debatable whether these keywords have any impact on being found by a Search Engine.
Provide good content.

How to fix BC blog post meta title and description

BC blog post <title> and <description> shows (seo) from sidebar/post list - But does not show in blog post page thru site menu nav.
The blog post title and description show up corectelly when clicking on sidebar list of posts.
It must be using the module layout list.html which I have set up with:
<html>
    <head>
    <title>{tag_blogpostmetatitle}</title>
        <meta name="description" content="{tag_blogpostmetadescription}">
    </head>
    <body>
On the sidebar/post list
Title and Description show correctly here:
https://cameocoinsonline.worldsecuresystems.com/cameo-coins-blog/how-to-buy-and-sell-gold- and-silver-bullion
The problem is:
when clicking on menu nav to “blog” it does not show correct title and description.
From the blog page thru menu nav
Title and Description do not show correctly here:
It shows the name of the blog (cameo coins blog) instead of the name to the post.
https://cameocoinsonline.worldsecuresystems.com/cameo-coins-blog
Please Advise
Thank You

Hey there,
Firstly, putting blog posts meta title in the list layout is really bad - You do not do this. This is not how meta works and you need to understand a bit more about what it is.
If you have a list of blog posts on a page all with lots of title and meta BC will do one of two things.
1. Use the very last title and meta it sees rendered on all the layouts/templates/page it sees
2. Render the last title and spit out multiple meta's
Meta implementation is for the detail layout of something like a blog only - The single rendered content - 1 title, 1 meta description. For your blog this will ONLY go in the blog detail layout.
And in that layout at the bottom of it..
    <head>
    <title>{tag_blogpostmetatitle}</title>
        <meta name="description" content="{tag_blogpostmetadescription}">
    </head>
You need to understand that, remove it from others to fix up that issue with what your doing first. Very likely because you probably have this in other list layotus and all over the place your seeing inconstant output, address this and you probably will actually find your issue fixed.

How to change the name and description of a wim using DISM

With Imagex we could update the name and description of the wim with on easy command:
imagex /info img_file [img_number or
img_name] [new_name] [new_desc]
e.g.
imagex /info Win7Combined.WIM 1 "Win7(x86)" "Windows 7 x86"
Since the ImageX tool is deprecated in Windows 8 and has been replaced with DISM, can someone explain how to update the name and description with one easy command using DISM like we could with Imagex?

It looks like this person had the same issue. Have you seen this
link
It talks about exporting an Index into a new WIM. Which, in a way, would be renaming it. It's really recreating it and you have to give it a name. But it seems to work.
Dustin Estes - MCP | www.dustinestes.com

Changing Meta Tags and description on SWF

Similar Messages

Maybe you are looking for