Changing MIDI banks with X-Fi Extreme Aud

I'm looking for something like the MIDI Bank Manager utility that the Audigy 2 ZS had. I tried finding something like this but to no avail. any help folks?

Nobody ever made standalone software for this. I would use the SoundFont Bank Manager that was included in your soundcard software suite, because you can load and unload soundfont banks of your choosing. You can get DAW software, like SONAR Home Studio 6 software which you can change the midi instruments only.

Similar Messages

  • TS4088 why is there a limit on 3 years? it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today :(

    it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today

    Hey Clintonfrombirmingham
    I called Apple technical support in Denmark, but with no positive reply.
    She couldn't do anything, and said that They had sent a recall Email about the problem and with their offer to repair the Macbook Pro, but I'd never recieved an Email about the problem. She wasn't in power to make an exception. It can't be true that i paid a lot of money, for a product that can't barely stand on its own feets, Apple didn't tell me that the product I was about to buy, would restart every 5 minute. and now when  they know the problem, they wont repair it? it just don't make sense for me. If a car seller discovers that all the brakes in a car he had sold, will crash after some years he will call all the cars back to repair no mater what. i just don't understand how Apple will make good service for their custumers, by extending the warranty from 2 to 3 years, but wont take the computers there is a little bit to old, 4 months will make the difference. i can't believe it.
    What can i do now? 
    best regards Oskar

  • TS5167 iMac 27 Inch from mid 2011 with screen display issues

    I have a iMac 27 Inch from mid 2011 with a 2.7Ghz Intel Core i5 processor and a AMD Radeon HD 6770M 512 MB video card. The screen has started to go dark on the left side whilst the right side is normal. Has anyone else had this issue? Is it the video card that is defect?
    Thank you

    Hello! I have a problem with the video card radeon 6970M, is the one that is described in this article ((((I'm from Ukraine,  and I purchased my iMac 27 " in the United States. Can you do something to help me with this problem? In Ukraine are now very expensive to change the video card on the iMac, the dollar is very high, a new video card will be very expensive for me. I can't work right now on my computer (((
    0E7247ABF86E
    Wed Aug 27 13:47:26 2014
    Machine-check capabilities: 0x0000000000000c09
    family: 6 model: 42 stepping: 7 microcode: 40
    signature: 0x206a7
    Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
    9 error-reporting banks
    Processor 0: IA32_MCG_STATUS: 0x0000000000000004
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400
    IA32_MC3_ADDR(0x40e):   0x00003f7f81890b5f
    IA32_MC3_MISC(0x40f):   0x000000000003ffff
    Processor 1: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400
    IA32_MC3_ADDR(0x40e):   0x00003f7f81890b5f
    IA32_MC3_MISC(0x40f):   0x000000000003ffff
    Processor 2: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400
    IA32_MC3_ADDR(0x40e):   0x00003f7f82b44482
    IA32_MC3_MISC(0x40f):   0x000000000003ffff
    Processor 3: IA32_MCG_STATUS: 0x0000000000000004
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400
    IA32_MC3_ADDR(0x40e):   0x00003f7f82b44482
    IA32_MC3_MISC(0x40f):   0x000000000003ffff
    panic(cpu 1 caller 0xffffff8000cdcad9): "Machine Check at 0x00007fff8c94b14a, registers:\n" "CR0: 0x0000000080010033, CR2: 0x00000001084a1000, CR3: 0x0000000045bac03a, CR4: 0x00000000000606e0\n" "RAX: 0x0000000000000000, RBX: 0x00007f993c100000, RCX: 0x00000000000002e5, RDX: 0x0000000000000008\n" "RSP: 0x00007fff5a355610, RBP: 0x00007fff5a355620, RSI: 0x00007f993c12e480, RDI: 0x000000010589f000\n" "R8:  0x00007f993c100000, R9:  0x00000000000002e4, R10: 0x0000000000001955, R11: 0x0000000000000000\n" "R12: 0x00007f993c12e480, R13: 0x000000010589f000, R14: 0x0000000000000000, R15: 0x00000000000275b4\n" "RFL: 0x0000000000000206, RIP: 0x00007fff8c94b14a, CS:  0x000000000000002b, SS:  0x0000000000000023\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2422.110.17/osfmk/i386/trap_native.c :168
    Backtrace (CPU 1), Frame : Return Address
    0xffffff81edc13dd0 : 0xffffff8000c22f79
    0xffffff81edc13e50 : 0xffffff8000cdcad9
    0xffffff81edc13fb0 : 0xffffff8000cf3fef
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
    Kernel slide:     0x0000000000a00000
    Kernel text base: 0xffffff8000c00000
    System model name: iMac12,2 (Mac-942B59F58194171B)
    System uptime in nanoseconds: 603458021016
    last loaded kext at 243321867094: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f833bc000, size 65536)
    last unloaded kext at 368833330215: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f833bc000, size 57344)
    loaded kexts:
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AGPM 100.14.28
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.kext.AMDFramebuffer 1.2.4
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.driver.AppleIntelHD3000Graphics 8.2.4
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.AMDRadeonX3000 1.2.4
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleThunderboltIP 1.1.2
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.kext.AMD6000Controller 1.2.4
    com.apple.driver.AppleBacklight 170.3.5
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.driver.AppleUSBCardReader 3.4.1
    com.apple.driver.AppleIRController 325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.iokit.SCSITaskUserClient 3.6.6
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
    com.apple.driver.AirPort.Atheros40 700.74.5
    com.apple.driver.AppleFWOHCI 5.0.2
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSurface 91.1
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.iokit.IOBluetoothFamily 4.2.6f1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.iokit.IOAcceleratorFamily 98.22
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.AppleThunderboltEDMSink 2.1.3
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.AppleSMC 3.1.8
    com.apple.kext.AMDSupport 1.2.4
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
    com.apple.iokit.IOUSBMassStorageClass 3.6.0
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
    com.apple.iokit.IOFireWireSBP2 4.2.6
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
    com.apple.driver.AppleThunderboltNHI 2.0.1
    com.apple.iokit.IOThunderboltFamily 3.3.1
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOEthernetAVBController 1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IO80211Family 640.36
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IOUSBFamily 683.4.0
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    com.apple.kec.pthread 1
    Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i7, 3.4 GHz, 16 GB, SMC 1.72f2
    Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 2048 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353432382D3034322E413030472020
    Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353432382D3034322E413030472020
    Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0-P2P
    Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: WDC WD1001FALS-403AA0, 1 TB
    Serial ATA Device: KINGSTON SH103S3480G, 480,1 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: Ext HDD 1021
    USB Device: USB2.0 Hub
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Hub
    USB Device: USB Device
    USB Device: Razer Arctosa
    USB Device: Internal Memory Card Reader
    USB Device: IR Receiver
    FireWire Device: My Book 111D, WD, Up to 800 Mb/sec
    Thunderbolt Bus: iMac, Apple Inc., 22.1

  • Help setting up Open DNS with new airport extreme

    I cant seem to get Open DNS to work with a new airport extreme. The status says I am not using Open DNS and its not filtering anything. I have followed the exact steps for set up listed on their website, checked the dns settings, cleared both caches and restarted the computer, modem and router with no success. I set the airport up in bridged mode, although I tried the other option under setup, but not sure what I was doing? I picked up this router because I wanted easy set up and the apple store assured me it would work with Open DNS. Oh, and I also downloaded the latest firmware update on the router. Can anyone help me with the settings or what else I need to check?

    Sorry, I am not familiar with this product, so I checked online to pick up some information.  Here I am referring to the information found here:
    http://www.dslreports.com/faq/6096
    I found that your device is mentioned as follows in the intro under Section 1 of this document:
    The BellSouth supplied Westell 2100, 2200 and 6100 models (Models A90-210030-04, B90-220030-04, and B90-610030-06/C90-610030-06, respectively) share many features and functions.
    Next, I am referring to the information under Section 2, under the heading of Standard Default Mode Connection (separate hub or switch present).  Unless you have changed the configuration on the Westell, this is how your device is operating. In this mode, the Westell device is acting both as a modem and router in one unit.
    So, an attached router (AirPort Extreme) must be configured as a switch to work correctly. That is what Bridge Mode is....the AirPort Extreme is operating as a switch when it is in Bridge Mode (which would be the correct setting to use when the Westell is set to its Standard Default Mode).
    Any changes that you want to make regarding DNS settings would need to be made on the Westell device, since it is acting as the main router on your network.
    In Bridge Mode, the AirPort Extreme simply passes that information through to its connected devices. You will not be able to make any DNS related changes on the AirPort Extreme since it receives that info from the Westel device. Some service providers force you to use their DNS servers, so you might want to check with Bell South or AT&T for more information in this regard.
    If you want to be able to configure the AirPort Extreme as the main router on your network, and instruct it to use the DNS information that you want, you will need to refer to the section under the heading of Bridged Ethernet Mode ( separate router present).
    Please note that the first item under this heading specifies that "This is the preferred configuration when using a separate external router..." (which would be the AirPort Extreme in your case)
    So, it appears to me that this would be the way that you must reconfigure the Westell device to allow the AirPort Extreme to function as the "main" router on your network. In this type of setup, you will be able to enter the DNS information that you want to use under the setup for the AirPort Extreme and it will act as you instruct.
    The AirPort Extreme would not be configured in Bridge Mode for this....it would be configured to "Share a public IP address".
    The next item in the article specifies that you "Must use a PPPoE client on the Router." This means that the AirPort Extreme would be configured to Connect Using = PPPoE as follows:
    AirPort Utility - Manual Setup
    Click the Internet icon
    Click the Internet Connection tab
    Connect Using = PPPoE
    You would enter your user name (probably your email address), password, etc in this area. Leave the Service Area box completely blank. Set Connection to Always On, and Disconnect if Idle to Never
    Click Update to save the new settings. Power off the Westell device after this and then restart it so that it will pick up the new information that you have programmed into the AirPort Extreme.
    I want to stress that this is how I would try to configure the Westell and AirPort Extreme. But, as I said, have not used a Westell device, so I cannot say that this will work correctly for you.
    It might be an excellent idea to contact Bell South or AT&T Support to ask for their opinion on this before you decide to change the configuration of the Westel device and the AirPort Extreme.
    This type of thing can be intimidating for users, so you might elect to use the services of someone like the Geek Squad at Best Buy, or a similar service from a local computer firm. Perhaps the Apple store could help as well.
    If it is not critical that you use Open DNS, you might want to simply leave things "as is", with the AirPort Extreme in Bridge Mode.

  • MIDI Banks and Apple Loops Trustworthy Downloads?

    I am currently attempting to locate and download MIDI banks and Apple Loops that I can use in the future, but I'm looking for a trustworthy site (a one stop shop if you will) to do this.  If we only have Garageband installed, and not Pro Logic or any other programs, then is Garageband the only program to open up and play around with our MIDI banks or Apple Loops just for fun?  I mean, is there another way we can open our loops simply to play around with and be able to pick out sounds we like, then perhaps save different sounds we like for future reference?  I'm confused on how to actually open the loops and MIDI banks, so I need someone to tell me precisely how to do this if we just want to begin exploring.  Thanks!

    You can open Apple Loops in the Quicktime Player. Many sample producers offer their libraries in Apple Loops format as well as the more traditional standard WAV nowadays, so you should have no trouble finding plenty of resources.
    Quicktime Player will also play GM MIDI files.

  • Set up DynDNS access through existing network with new Airport Extreme

    Hey everyone!
    I just can't seem to figure out what I am doing wrong here...
    I am working with an office network which was initially set up with a Linksys router and a separate Linksys hub connecting two Macs and a network printer in one particular room. We added several new iMacs and for ease of connectivity, decided to add a new Airport Extreme base as one of the new iMacs is acting as a server for a database the other new wireless iMacs connect to. Also, all the machines need access to the connected network printers connected in various parts of the office.
    What we have now is the original Linksys router -> Linksys hub -> Airport Extreme. Everything seems to be working fine this way but I do believe that both the Linksys router AND the Airport Extreme are distributing IP addresses, which I'm thinking, could be the problem. I set up a DnyDNS account just fine, assigned port # 8080 on the server iMac and also opened port 8080 on both the Linksys and Airport Extreme. I still cannot get through to the server via DynDNS however.
    I am wondering if I should turn off IP distribution on the Airport Extreme and let the Linksys router handle all that? The software that the other wireless iMacs run to access the database on the server depends on the server IP address too, so will this need to be changed if the Linksys is handling IP addressing? How does the hub affect any of this... does it change or interfere with the addressing in any way?
    Thank in advance for any ideas or suggestions!

    maxyourmacs, Welcome to the discussion area!
    I am wondering if I should turn off IP distribution on the Airport Extreme and let the Linksys router handle all that?
    Yes
    The software that the other wireless iMacs run to access the database on the server depends on the server IP address too, so will this need to be changed if the Linksys is handling IP addressing?
    Probably
    How does the hub affect any of this... does it change or interfere with the addressing in any way?
    It has no affect.

  • Pawtec UltraSlim External USB 3.0 on MacBook Pro 1,1 A1150 (Mid 2006) with 10.6.8 Snow Leopard

    Hi,
    I've quite a problem with my brand new Pawtec UltraSlim External USB 3.0 BluRay Burner (it is build around the MATSHITA BD-MLT UJ265 burner).
    Writer works great with MacBook Pro5,5 13" A1278 (mid 2009), but things are completely different on MacBook Pro 1,1 A1150 (Mid 2006). When I insert a CD or DVD, burner tries to read it but after second stops. This pattern repeats over and over again. The only effect of all these attempts is burner unpleasant sound. The same thing happens on the Windows XP installed as a bootcamp on this MacBook (Mid 2006). I tried to solve the problem in the Disc Utility, but it doesn't recognise the writer properly. The writer appears there only for a few seconds and then disappears. What is more, when it is visible, all the buttons (options) are disactive.
    As I said, this problem only occurs on the older MacBook Pro 1,1 A1150 (Mid 2006) with 10.6.8 Snow Leopard.
    On the newer MacBook Pro 5,5 13" A1278 (mid 2009) also with 10.6.8 Snow Leopard everythng works fine. Even on Windows XP installed as bootcamp on the newer Mac, burner works with flying colours.
    If the software (Operating systems) are the same, that makes clear that something must be wrong with the hardware. But is the difference between these two MacBooks so great, that it makes impossible to read simple CD/DVD from external drive?
    I didn't find any drivers/software for this burner on Pawtec as well as on Matshita webpage. PatchBurn works only up to Mac OS X 10.4 Tiger so this also isn't a solution.
    Have You ever encounter this kind of problem? I will be gratefull for any ideas, solutions.
    Thank You
    Greetings
    Jacoszek

    Anyone has any advice? Or the problem is just the age and incompatibility of the old MacBook Pro 1,1 A1150 (Mid 2006) and the best way will be to change it into something newer?

  • How can I change my bank account details on iCloud ?? I have been sent instructions via email from Apple but they don't appy ? Can anyone help ? Thanks in advance

    How can I change my bank account details on iCloud ?? I have been sent instructions from Apple via email and they don't appy ?? Can anyone help ? Thanks in advance

    You have to change it using iTunes on your computer, as explained here: Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support.  (This article: iCloud: View or change your iCloud payment information no longer works with iOS 8 or Yosemite.)

  • How Can I separate my MIDI Channels with layered instruments in MainStage 2 With my Axiom 61?

    I have been at it for 3 days straight. I want to play an internal instrument (EVB3 for example) and trigger samples with the EXS24 without triggering notes from the other instrument. I have my keyboard set to MIy help meDI channel 1 and my drum pads set to MIDI channel 10. The still play together. I've tried changing MIDI input on both channel strips to multitimbral, Channel 1 for the keyboard and channel 10 for the drum pads. Still playing together. I've tried changing attributes in the Mapping screen. Still...
    I don't think its the Axiom. I've tried changing MIDI CC numbers but then it won't talk to either instrument. I'm currently using MIDI cables into a 3rd generation M-Box. I've tried using USB as well. Please, somebody help me!!

    Sorry for the late responce, I've been in program mode and haven't had a chance to come back to this.
    I figured it out. It was an option that I had over looked in the Assignments & Mapping tab in Edit Mode. At the bottom of the window that says All Devices. In that menu there is another tab that says Channel 1-16. If you click where it says Unassigned, down in the Screen Control Inspector there is a checked box that says "Send unassigned MIDI to all Channel Strips". If you uncheck that box then everything works perfectly. It is a little extra work having to assign the keyboard everytime you ad a channel strip but when you have to do some serious programming it's worth it.
    Anyone who needs to program with multiple devices should uncheck this right out of the gate. It will save you from pulling your hair out.
    Thank you Bruno for your help. It is much appreciated.

  • HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3

    HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3.  When I purchased the monitor a few weeks ago it worked perfectly when computer was in clamshell mode or with lid open. Now external display has stopped working.  When I turn on display it scans for signal but does not find it and then immediately goes into sleep mode.  I am using a DVI connection with the adapter for the mini display plug.  REALLY FRUSTRATING. Any help would be extremely appreciated. 

    Hi lancekatigbak,
    If you're having issues with the display out on your MacBook Pro, you may want to take a look at the troubleshooting steps in the following article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Cheers,
    - Brenden

  • Problems with Bonjour, Airport Extreme and OS 10.4.3

    I have a networked, HP Photosmart 8450 printer. The printer was connected to both an iMac 20" and PowerBook G4 15" running OS 10.4.3. Yesterday, I lost the ability to print from the PowerBook. I have identified it as a problem with my Airport Extreme connection.
    The iMac can see the printer just fine, and it shows up using Bonjour when I browse printers in the Printer Setup Utility. The PowerBook, however, cannot see the printer - that is, it does not show up in the browser, but only when I use the Airport connection. However, when I connect the printer to the PowerBook via USB, or when I plug a network cable in to the PowerBook, it sees the printer immediately using Bonjour.
    It appears, then, the problem is with my Airport Extreme card. Has this issue been identified by anyone else/Apple? Perusing the discussion boards, it seems others have had this problem.
    PowerBook G4/iMac Mac OS X (10.4.3)

    Thanks for the response, however, my question remains: I'm wondering if anyone else with an Airport Extreme ("b" version) and OS 10.4.9 installed has a problem using Admin Utility 4.1.1 and/or Airport Setup Assistant 4.1.1? Specifically, the problem is, after resetting the Airport Extreme, I was able to set it up using the Setup Assistant (establish the network, set the password), but thereafter, it does not show up in the Admin Utility at all (but the Extreme's lights flash as it is being accessed) and in Setup Assistant, it shows up, but there are "errors" when trying to change settings. It is very odd.
    When I was running 10.3.9, I had had no problems setting up/administering my Airport Extreme. Suspecting the Extreme itself, I even had an Apple Genius inspect it at the Apple store, but it was pronounced in working order. I might try to check the Airport card inside the G4 (by trying it in a friend's G4). If this communication problem is not shared by anyone else (ii.e., a software issue), it could be my Airport card.

  • Setting up TC on N (5 GHz), with older AirPort Extreme and Express on B/G

    Hi there,
    I've done a search through the forums (and the net) to see if I can find a solution to my query, but the answer currently escapes me so I thought I'd ask outright....
    I have recently purchased a Time Capsule. Previously my wireless network relied on an AirPort Extreme Base Station (one of the older white models that looked like a UFO) over 802.11 b/g which was extended by an AirPort Express (again, non-N).
    What I would very much like to do is create a setup that has the Time Capsule running 802.11 N only over 5 GHz, with the AirPort Extreme connected to it over Ethernet and still running a B/G network out with the Express.
    There is a diagram here, which shows exactly what I want, but their instructions are far from complete or up-to-date with the current AirPort Utility software: http://www.appleinsider.com/articles/08/03/31/exploringtime_capsule_wifi_802_11n_and_the_5ghzband.html
    However, I can't for the life of me work out how to do this. If someone could help me out I would very much appreciate it.

    For the TC, I suggest that you change the Radio Mode to: 802.11n only (5 GHz) - 802.11n only (2.4 GHz).
    For the AEBS & AX, I am assuming that you still want them as an extended wireless network ... correct? If so, all that would need to change is the following for the AEBS:
    o Connect the AEBS directly to one of the TC's available LAN (opposing arrows) ports by Ethernet. Connect this Ethernet cable to the WAN (circle-of-dots) port on the AEBS.
    o Reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))
    o You may want to rename the AEBS/AX wireless network with a new Network Name (or SSID). This is totally optional, but may prove helpful as a reminder that you only want non-"n" clients to connect to it. For example, and with absolutely no imagination on my part, you could name your TC's wireless network: My Really Fast Network, and the AEBS/AX's: My Not So Fast Network.
    o Finally, you will want to be sure the the AEBS/AX wireless network is at least 3-5 channels away from the 2.4 GHz network provided by the TC. This will prevent any Wi-Fi interference between them.
    The WDS settings created earlier when you configured the AEBS & AX for an extended network should remain the same.

  • I tried to install OS X Mavericks but my Mac Book Pro (of mid-2009 with OS X 10.7.5) crashed

    I tried to install OS X Mavericks but my Mac Book Pro (of mid-2009 with OS X 10.7.5) crashed. I had to change the Hard Disk. How can I install OS X Mavericks on my Mac laptop safely without going to another crash? I checked and found that my lap top is eligible for the upgrade to Mavericks. Can't understand what happened. Please help and advise how to do the upgrading. Thanks.

    I could not report the crash as my lap top was out of order. So now it's working. Should I report the crash and to whom? Do you have any link for that?

  • Changing MIDI Port Order is wreaking havoc on my Environment

    Anyone seen this before?
    I've got a MOTU Midi Express with 4 ins and outs - it's my main interface.
    I've also got a Novation Remote25SL which works as a control surface/controller with 3 out ports. It requires some special Environment cabling to work properly with Logic.
    Everything was working fine until lately all my projects stopped responding to MIDI from my master keyboard...
    I eventually discovered it was because Logic had some how changed the order of MIDI ports. It used to be "Midi Express 1.... 4" followed by "Remote25SL 1...3".
    Now if I look at the "outputs & Ports" page in the Environment, it's reversed. "Remote25SL 1...3" followed by "Midi Express 1....4".
    So what? Well, the dumb cables in the environment don't move when the ports do. So the cables that used to be connected to the Remote25SL are now connected to the Motu Midi Express, which wreaks havoc on my project.
    Any ideas a) what causes this, and b) how to re-order the ports so it goes back the way it was before?
    I've tried messing around in the AudioMidi setup tool but don't see any thing here that will help.
    It points up, I think, a flaw in Logic's "logic". Environment cables should be tied to physical/logical ports, not just handed out on a 'first come, first serve' to whoever shows up on the midi bus first. The system apparently can "see" the difference between the Motu and the Novation. So why can't Logic?
    Grrr. Time to start reading the Nuendo brochures again.

    I HAVE A SOLUTION
    and it works fine for me after a series of trial and error experiments.
    Quit Logic (for now) and do the following.
    1) Download the app MidiPipe from this site:
    http://www.apple.com/downloads/macosx/audio/midipipe.html
    2) Plug in all of your MIDI controllers (I mean, all of them)
    3) Start making one 'pipe' at a time. Think of them as 'rules' for MIDI flow.
    I wish I could post screen shots here... I can show you that I have 6 'pipes' happening.
    Why: I have these controllers (according to Logic) happening:
    Korg nanoKEYS, nanoPAD, nanoKONTROL; Alesis Photon X25; midiman (now M-Audio) midisport 2x2; Tascam US-144 (the MIDI portion)
    4) In these pipes, ONE AT A TIME, these pipes are very simple:
    -drag a •Midi In for each controller,
    -click the 'hijack' button.
    -drag a •Midi Out next,
    -create a new virtual Midi Out Port and name it. In my case I went numerically (e.g. 1 nanoPAD, 2 nanoKEYS...) just so I can see the port name is different than the input. Do what works for you here
    5) Create a new pipe, redo step 4 until you've created a new pipe for every controller you have.
    Save this Midipipe file, and open it prior to any Logic session, before you open Logic.
    6) Open Logic. In the global preferences, go to Controller Assignments (Command-K)
    and you'll have to define any custom controller data (this may not be necessary for you). But I had to change the controller listening port for all nanoKONTROL assignments. You may not have to do anything here at all.
    7) In the case of the folks trying to use two (or more) controllers, as in three keyboards at a time you still have to change one setting: and unfortunately this is not global for Logic, you'll have to change it every single project:
    -Under File>Project Settings>Recording, you need to check the box that says
    "Auto Demix by channel if multitrack recording"
    -For each virtual instrument, you need to set the Midi Channel it responds to. Generally on the left above your channel strip, named Inst 1 (2, 3, 4, ...) depending on which track you're on, click the drop-triangle and you'll see: MIDI Channel: ALL --- change it to whatever you assigned your controller to
    -After you've assigned those MIDI Channe;s per track; now arm each track you wish to record onto (or play, trigger, etc) ---arm meaning 'click the R so it's red'
    You should be good to go!
    To boil it down to simply: download MidiPipe, figure it out, define controller data if necessary, check Demix by Channel in Project Settings, Set each track's Midi Channel, Arm each track, record two (or more) parts at once.
    You'll spend 30 minutes or more figuring out MidiPipe for your setup (less if you're brilliant); anywheres up to an hour or more in Controller Assignments but you may not need to do anything here); and less than a minute for the rest. Do the heavy work once (and tweak it) -- after that, the checkboxes/Midi Channel assignments/track arming is like, 10 clicks every project.
    Good luck!
    Works great for me with this setup:
    all the controllers listed above, Logic 8.0.2, iMac 2.4Ghz, OSX 10.5.6
    ~Robb

  • Need a new mac pro! Can I boot MacPro 6,1 (mid 2012) with an internal HD with OS 10.6 (Snow Leo)?

    5 hours after reading here: (so much information that says "yes" "maybe" "no".....)
    I want and have to change my actual MacPro (late 2007) to a newer one, because without my business is over.
    The newest one (end 2013) is not possible, because my other hardware is too old for that one.
    (still need Firewire and Rosetta)
    So I decided to buy an older "classicle" MacPro to put my 3 or 4 pieces of 2TB HDD in...
    ...... But I still need Rosetta, -> OS 10.6
    My question is:
    Can I boot a mac 6,1 (mid 2012) with a Harddisk with 10.6, I take out of my old machine?
    yes? anything to be aware or to update? (answeres here say mostly yes, sometimes, never ...)
    For sure I am interested in the latest model..... but will it work?
    If not:  I will buy a mac 5,1 (mid 2010).
    Anything to be aware or to update, if I pull in my HD with 10.6 out of the old model from late 2007?
    I don't want to downgrade to SL !!!!!!!
    I just want the Possibility to boot internal from the original OS on the first drive and from 10.6 on a second drive !!)
    (This good old Power Machines (all in one) will be jewels next year.....)  ;-)

    Mac Pro
    Date introduced
    Original Mac OS X included
    (see Tips 1 and 3)
    Later Mac OS X included
    (see Tip 1)
    Mac OS X Build(s)
    (see Tip 2)
    Mac Pro (Mid 2012)
    Jun 2012
    10.7.3
    10.8, 10.8.3
    11D2001, 12A269, 12D78
    Mac Pro (Mid 2010)
    Aug 2010
    10.6.4
    10.7, 10.7.2, 10.7.3
    10F2521, 10F2554, 11A511a, 11C74, 11D2001
    Mac Pro with Mac OS X Server (Mid 2010)
    Aug 2010
    10.6.4
    10.7, 10.7.2, 10.7.3 (Server)
    10F2522, 11A511a, 11C74, 11D2001 (Server)
    Mac Pro (Early 2009)
    Mar 2009
    10.5.6
    10.6
    9G3553, 10A432
    Mac Pro (Early 2008)
    Jan 2008
    10.5.1
    10.5.2, 10.5.4
    9B2117, 9C2031, 9E25
    Mac Pro
    Aug 2006
    10.4.7
    10.4.8, 10.4.9, 10.4.10, 10.5
    8K1079, 8N1430, 8N1250, 8K1124, 8P4037, 8R3032, 8R3041, 9A581, 9A3129
    -- from:
    Mac OS X versions (builds) for computers
    For example the Mac Pro 2010 CAN run 10.6.4 or later BUT--
    --- the last "Full Retail" 10.6 DVD conatins 10.6.3, which will not boot. You need a different Mac of just the right age to Install on, [starting from a Full Retail DVD, not a DVD from a different model] update to 10.6.8, then swap the drive over.
    The assertion has been made that the 2012 model (which runs 5,1 firmware) is indistinguishable from the 2010 model (which runs 5,1 firmware) as far as Hardware and therefore as far as what Mac OS X it can run. EveryMac.com agrees that this model will run 10.6.4.

Maybe you are looking for