Changing Mileage "Currency Exchange" Rate in Expense

I've recently upgraded to Palm Desktop 4.1.4 which removed Expense from my programs... although I found it in the Palm Desktop program! (I use MS Outlook).
The old version would download to the Sample1 MS Excel sheet, which is my preference, if possible. I'm no Excel guru, so I can't figure that out.
Anyway, Palm Desktop Expense has the default for expense mileage at $1 per mile. I wish I got that! I have been unable to change that exchange rate to the .40 going rate. I've been all over the palmOne site looking for help.
Thank you!
Post relates to: Palm m515

I found the answer... and you're right, I don't think the techs read this forum.. mostly because having talked to them a couple of times on the phone, I'm not sure they can read english.
Besides, with the sale of palm now, I doubt the Palm really gives a too hoots about the users anyway...
So, to answer the question:
In Palm Desktop 4.1, (yes, the last version from the most recent) you would select mileage in your palm and enter the data...
Then when sync'ing, in Expense, you'd click on the entry and then go to the bottom to the conversion icon (looks like 3 stacks of coins) next to the total...
Then you could click on "Adjust Currency Rates" and another pop-up would appear allowing you to adjust $1 = mi _____
Apparently this is broken in 4.1.4.
Hooray Palm!
THIS is how you kept losing market share to WinBlowsCE.
Pat yourselves on the back for a job poorly done!!
See ya guys,
-Ben

Similar Messages

  • Gain or loss due to foreign currency exchange rate in Travel Management

    Hi Experts,
    I am facing some issues in foreign currency surrender in Travel Management.
    Example:-
    An employee goes on a foreign trip in which he takes advance in USD. After returning from the trip, if any USD balance is there then he returns it to company. If the exchange rate falls or increased, then company books it as gain or loss to comany. How the same can be handled in Travel Expense Report. Below is an example of the same.
    USD
    Exchange Rate
    INR
    Advance taken
    550
    65
    35750
    Expenses claimed
    500
    65
    32500
    Difference
    50
    65
    3250
    But Returned to company in less exchange rate
    50
    60
    3000
    Loss on Exchange
    250
    Regards,
    Daniel

    HI Sigi,
    The problem is, during a International trip. While taking the advance, the exchange rate of USD is something & while returning or excess expenditure the exchange rate is different. Because the posting to be done in INR & the expenses are adjusted against the advance.
    But when there is a change in the exchange rate then the whole advance is not adjusted. SO to adjust the same the balance amount to be adjusted as gain or loss to the company a/c.
    Regards,
    Daniel

  • Currency exchange rate differences in rebate agreement settlements

    Hi Experts,
    My customer has issue in Rebate agreements and final settlements.
    ISSUE:
    Rebate agreement currency is EUR
    Billing document currency is EUR
    Company code currency is SEK
    Initially ( Before final settlement)
    The accrual amount in sales volumen 3151.05 EUR
    the accrual amount in drill down 3152.05 EUR
    After Final settlement
    The accrual amount in sales volumen 2.62 EUR
    the accrual amount in drill down 3152.05 EUR
    The accounting documents shows after final settlement
    customer A/c 3151.98 EUR credit
    Expenses A/C 3151.98 EUR debit
    Accrual A/c 3149.43 EUR debit
    Expenses A/C 3149.43 EUR credit
    The difference of 2.55 EUR is due to currency differences.
    there is no retrospective rabte processing .
    Kindly give your expertise resolve the issue of currency exchange rate difference in customer currency.
    Immediate response is highly appriciated
    Thanking you
    With regards
    Murali
    Message was edited by:
            Murali Krishna Lanka
    Message was edited by:
            Murali Krishna Lanka

    HiI
    f you set this selection field then the settings in the ERD Setting column for this currency type are no longer relevant. The system calculates and posts exchange rate differences between order-related goods receipts and invoices not just for materials with standard price, but also for:
    Materials with moving average price
    Account-assigned transactions
    Planned delivery costs
    The valuation of the inventories or consumption is effectively done at the exchange rate for the goods receipt, and not at the exchange rate of the invoice. When you post the good receipts, the fixed exchange rate from the purchase order is not used, but the translation of the purchase order values to local currency is always done at the posting date of the goods receipt.
    If you are using the material ledger with actual costing, the system does not include the posted exchange rate differences at period-end closing in the actual prices of the materials.
    Regards
    Antony

  • Currency Exchange Rate Table

    Dear Experts,
    One of SAP our user edited the maintained currency exchange rate table (F-62) but he is lying. Now how can I check who edit the table in a particular date? Is there any t-code or way?
    Thanks in advance for this help.
    Best Regards.
    Ripon Kumar Paul

    Hi:
         If change log is enabled by your BASIS guy then you can see it menu...utilities...Change log.
         Regards

  • Display currency exchange rates

    OC41 seems to always default to a "change" mode.
    Auditors are unhappy.
    I need to see the data, but I do not want to change the data
    Is there a separate transaction for display only?
    If not -  suggestions??
    Thanks
    Althea

    There are three T Codes for currency exchange rates - OC41, OB08 and S_BCE_68000174.  Give your users authorization (display only - your Basis/Security team should help you with this) to any of these T Codes.
    Some more T Codes for the same transaction - OKUS, F-62
    Edited by: Srikanth Tamma on Apr 30, 2008 12:13 PM

  • Replication of Currency exchange rate types

    Hi,
    I had changed the currency exchange (eg:USD to INR) rate types in R/3 system.now I need to replicate from R/3 to SRM.
    please let's know how to replicate the Curreny exchange rate types from R/3 to SRM.
    Kindly suggest me.
    Regards,
    sss

    hi
    eevry day you might run this job right ?
    report se38 BBP_GET_EXRATE - this bring every day exchange rate update from ECC to SRM
    muthu

  • How to Add a parameter of currency exchange rate in the selection screen

    Dear Friends,
    How to Add a parameter of currency exchange rate in the selection screen with format (9999.99999). wich field i need to take.
    Thanks,
    Sridhar

    TCURR-UKURS.
    ~Suresh

  • Different currency exchange rate at time of sales order and invoicing

    Hi Friends,
    Actually,we are facing a crucial problem in Export where we would like to have the current currency exchange rate to be applicable both at excise and commercial invoice.
    Regards,
    Praveen

    Hi Ankur,
    Thanks for your reply.But our problem is sales order,exchange rates are defined with M type in OB08 as u have said.However when the periods are different for order entry and invoice generation we are facing the following problem.Orders are at old exchange rates and excise invoice is getting generated at current exchange rate.This is resulting in value difference between commercial invoice and excise invoice.
    Please help.
    Regards,
    Praveen

  • T-Code for changing the default Exchange Rate reference for creating PO?

    Dear All,
           Can somebody kindly give me the T-Code for changing the default
    Exchange Rate reference for creating PO? Is there a Step by Step
    procedure before changing the default exchange rate?
    Thank you in advance.
    Regards,
    Gopesh

    Hi
    There is not such Tcode to change the default exchange rate from the PO.
    If you want you can confugure the exchange rate in the following path in the IMG,
    SPRO>MM>LIV>Incoming Invoice>Configure How Exchange Rate Differences Are Treated
    Hope it helps you.
    Cheers
    Umakanth

  • To maintain foreign currency exchange rates

    Hi,
    Please help me with this scenario.
    I want to maintain  foreign currency exchange rates.Kindly tell me the process to maintain these rates. and also please tell me that is their any feasibility to maintain exchange rates on daily basis.
    Regards,
    Pavani reddy

    Hello,
    you can also use currency worklists in order to maintain exchange rates on daily basis. In order to enable this functionality you have to maintain the following configuration:
    1) Define Currency Worklist using the following path: SAP Netweaver - General Setting - Currencies - Define Worklist for Exchange Rate Entry (specify the name of the worklist, short description and maintenance interval);
    - assign exchange rate to the worklist using the following path: SAP Netweaver - General Setting - Currencies
    2) Assign Exchange Rate to the Worklist (please specify your exchange rate type, from and to currencies, the name of the worklist previously created as well as quotation type).
    3) In order to maintain exchange rates you will have to use t-code TCURMNT (you can also find this transaction under standard SAP Menu (Fin. Accounting - GL - Environment - Current Settings - Enter Exchange Rates using a Worklist).
    In my opinion, this t-code is more user-friendly than the standard OB08. But it's now up to you to decide whichever to use.
    Best regards,
    The Wirtschaftsmann

  • Maintain foreign currency Exchange rates

    HI Sap Experts,
    Maintain foreign currency Exchange rates , whether it is month end activity or year end activity.
    for this what is the t/code what are the parameters are need to be given.
    Regards,
    Prabhakar

    Prabhu,
    At the very minimum, this is monthly activity ... however, if the company has large volume of transactions in foreign currency, then these rates are typically maintained on daily basis.
    You can maintain exchange rates for relevant currency pairs using T. Code S_BCE_68000174. Corresponding configuration tasks are in IMG under NetWeaver General Settings.
    HTH,
    Manish Patel
    Sr. SAP Solutions Consultant

  • Currency exchange rate

    I, have a question regarding the Currency exchange rate.
    We have a total of 20 -25 different local currency data records in R/3.
    In BW reprot we need to convert all these local currency to CDN.
    Can anyone suggest me how to do it and anylinks that would help me, please help me as i am new to BW.
    thanks
    SAM

    You can set the translation directly in the query and BW calulates the conversion at runtime. Obvious you must specify the type of exchange rate, the date of reference, and so on...
    In the BEx Analyzer, there are two possibilities for handling different currencies :
    1 Definition of a currency translation per key figure in the query definition
    2 Ad hoc currency translation in the Workbook (after having executed the query)
    You can find here some info:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a682de07211d2acb80000e829fbfe/content.htm
    https://www.sdn.sap.com/irj/sdn/advancedsearch?searchpluginname=sdn_library_adv
    Here you can find the following:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e473ab90-0201-0010-22ac-fdd925cac167
    Hope this helps...

  • Currency Exchange rate maintenance

    Hi all FI Master,
    My local currency is in GBP. I maintain foreign currency exchange rate like USD to GBP, SGD to GBP and so on. My question is do I need to maintain the exchange rate in the other way round (like GBP to USD)?
    Secondly, if my vendor bill me is foreign currency USD, and I pay in foreign curr SGD, do I need to maintain the exchange rate from SGD to USD?
    Thank you.

    Hi Cire,
           The Answer depends on your settings for the Exchange rate type
    (SPRO > General Settings > Currencies > Check exchange rate types)
       1)    No if  Invert flag is set for the exchange rate type.
              Yes if flag is not set.
       2)    No if you have specified GBP as the Ref.crcy.
              Yes if no Ref.Crcy is specified.
    Kind regards

  • Package/class which gives currency exchange rates

    Is there any package /class in Java which gives the current currency exchange rate ? If not how can this be achieved?

    you'll have to find an online provider of that information and write code
    to subscribe to the information. Up to the minute rates will probably cost you as well.

  • Replicating currency exchange rates

    In SRM, table TCURR lists the currency exchange rates. When replicating the exchange rates from R/3 to SRM using program BBP_GET_EXRATE, it'll ask me for a logical system. However, when viewing TCURR, logical system information is not displayed.
    Since my SRM system is connected to two R/3 systems, it seems that after replicating exchange rates from the second R/3 system, TCURR is replaced with rates from the second R/3 and rates from the first system have been overwritten. TCURR in SRM looks identical to TCURR in the second R/3 system and not the first R/3 system.
    Is it so because it's assumed that exchange rates are universal and they should be the same regardless of which R/3 system they come from? Or am I missing something?
    Thanks,
    SN

    The program BBP_GET_EXRATE is used to replicate the currency rates from the backend system to the SRM system. The currency table is TCURR, as you explained.
    The reason why this program BBP_GET_EXRATE asks for the logical system is that, there could be more than backend system connected the SRM for business reasons. When you choose a logical system, the RFC destination of the logical system is found by the program and this RFC destination is used to call the function module 'SBIC_EXRATE_TRANSFER' in the respective R3 system.  This function module will be in the respective backend system and gives the data of the TCURR table with it.
    There will be a call to 'SBIC_CURRENCIES_TRANSFER' in the backend system based on the RFC destination determined.
    The currency rates independent of the backend system should be the same as it is universal, so you can maintain only one currency conversion for a pair of currencies.
    Please reward points if you find it useful. Thanks

Maybe you are looking for

  • Ipod cannot be synced unknown error occured (-48)

    _Help needed please!_ I've just got a new laptop, downloaded the latest version of itunes on it, connected my ipod to it (old click wheel version 20GB) and this error message keeps popping up: *'The ipod "ipods name" cannot be synced. An unknown erro

  • SQL*Loader-930: Error parsing insert statement for column

    we upload data on daily basis in application throug apps user and these table are invloved 1. DEV_RA_INTERFACE_LINES_ALL(owner is a apps) 2.RA_INTERFACE_LINES_ALL(owner is a AR) we do steps 1 delete record from DEV_RA_INTERFACE_LINES_ALL table 2 dele

  • Problems with Date bind variable

    I'm trying to use a Date as a bind variable in a View Object, and I'm running into difficulties. I've got the bind variable type set to date, and the control hints for Format Type and Format set to "Simple Date" and "yyyy-MM-dd" respectively. When I

  • SmartView Error - "The data entered is wrong"

    There is an alert in Smart View Ad Hoc that appears intermittently that says "The data entered is wrong, so it will revert back to the previous value". What causes this and what is the resolution? I realize this question was already asked but I didn'

  • Navigational attribute in aggregates

    Pls. answer. -How do you include the navigational attributes in aggregates. Aggregates are created over the characteristics(InfoObjects), how to include the Nav. attr. to aggregates? -Does the usage of Nav attr in aggregates reduces the performance?