Changing mode with HS-950

Hi there.
I've had a thorough look through the manual, these forums, Google, and have also done a bit of trial and error myself, but as of yet have been entirely unable to locate how to switch mode with these headphones.
I have installed the software and it all works correctly, but I'd like to put the headphones in game mode, and I simply can't work out how to do it. I have seen plenty of images of some sort of 'mode switcher' online, but I'm unable to locate it in either the audio console or the console launcher.
Anyone have any ideas? Thanks.
EDIT: Also when I go into a game right now it sounds like it is at a really low bitrate -- what's going on?

Hi, thanks for the reply.
That would explain my confusion. However, as for the low quality sound I'm getting (which I thought was due to entertainment mode), it goes away when I stop the Creative software (specifically VolPanel) from launching on Windows startup. That is, it sounds fine when I don't have the software running, but the moment it starts running, no matter which settings I change I always get really low quality audio, almost like poorly encoded MP3 audio.
Any idea what's up with that?

Similar Messages

Is it possible to set a "query in change mode" with the Report Designer 7.x

Hi,
I have a query set in "change mode" with an index set as "data can be changed using user entries or planning funcionts".
If I use this query as a "Data Provider" in the Report Designer, the result is still in "change mode" or a result of the Report Designer is only a static image?
Thank's,
Valentina.

Hi Deepu,
I had suspected this...
Thank you very much!
Regards,
Valentina.

How to handle "Display/Change" mode in XD0x with CUSTOMER_ADD_DATA_CS

Hi,
I've implemented customer fields to the debitor master data screen with BADI CUSTOMER_ADD_DATA_CS,
using methods SET_DATA and GET_DATA and created a new screen within a Z-function group.
So I have a new tab with the custom fields. If I do nothing further, the fields are input enabeld also within transaction XD03.
At the moment, I'm using the value of sy-tcode to check for display (=XD03) or change/create (XD02/XD01) mode to handle
the enable/disable mode of this fields.
This is my coding in the PBO of my Z-screen.
LOOP AT SCREEN.
    IF screen-group1 = 'Z01'.
      IF sy-tcode = 'XD03' OR sy-tcode = 'VD03'.
        IF sy-ucomm = 'ENTR'.
          screen-input = '1'.
         ELSE.
*.. display mode
          screen-input = '0'.
        ENDIF.
      ENDIF.
   ENDLOOP.
But if the user change form display to change mode wthin(!) the transaction, the sy-tcode is still XD03 and not XD02.
If this is done in the screen with the custom fields, I can check for sy-ucomm (='ENTR'), but if an other screen is opened, I could not check for sy-ucomm.
How can I handle this?
I've found the following enhancement point:
ENHANCEMENT-POINT MF02DFD0_01 SPOTS ES_MF02DFD0 INCLUDE BOUND.
Or can I use the other methods in the BADI like SET_FCODE?
Thanks in advance!
Andreas

Hi Andreas:
I have to do something similar but for t-code FD02/FD03.
I've created a program type M to control my new dynpro, and using a PBO module to change the screen depending on display/modify.
I'm trying to add code to method SET_DATA, but my knowledge on OO programamtion is limited.
Could you please provide the part of your code to implement the solution described in this post?.
Best regards,
Carlos.

Problem with change mode in program

Hi,
I have problem to chage the program from display mode to change mode. I tried to change the mode by clicking change icon(little pen indicator) and also i tried with menu path program->Dispaly<>change also. But i got message that The user kumar currently editing the program. But i have not opened any sessions ,No one has opened this program also. I am not able to understand why the message "The user kumar currently editing the program coming". SO how to solve this. Plz help me regarding this.
Regards,
Kumar

go to SM12 delete all the lock entries for your user name. then try changing your program.
Regards
Raja

Change Adam I/O (Channel) mode with LabVIEW(Adam 6060 or 6000 / Modbus)?!!

Hello!
Know somebody how can I change my Adam input or output mode with Labview and modbus command?!!
(for example from counter --> DI or DO --> Pulse)
tanx!
Ali

I have never used the 6000 Series from adam but in the 4000 series, changing mode was not done while the system was running, it required putting the device in init mode (usually through grounding the init pin) then sending the command to change settings like the channel scale, input vs output or the device address. Also although the 4000 series was 485 multidrop it was and used addresses, it did not use Modbus but a simple string language in as defined by the manual. This might be different for the 6000 series, but again I have only experience with the 4000 sereis (4017, 4018, 4050 ....)
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
is there a way to put the IMacs into display mode with out logging into my Mac mini first
or is there a portable monitor that I can use that will not require me to login first

This
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
says:
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
How do I exit TDM?
To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

P.O Error in Process after copying the existing item in change mode

Hi All,
We are in SRM 5.0 Server 550 and SP15 and are using Extended Classic Scenario.
We are facing a peculiar issue, when an already created P.O (Free text - goods) is changed and a new line item is added either manually or by copying the existing line item and then ordering it, the P.O is going into Error in Process status.
This is happening only when i am adding a new item (material) to the existing line item (material) but when i am adding a service line item in the change mode to the existing material line item, the P.O is getting ordered without any issue.
I believe this is SAP bug and raised with SAP for OSS.
Meanwhile i would be grateful if you can provide any resolution to this issue and provide any OSS note number (If one already exists).
Regards,
Teja

Hi Teja
it works fine for me.
old po template..
taken describe procureemnt - goods
copy the line item
changed qty and price
POs created for both items in one PO since vendors are same?
what the error message says in the application monitor or rz20 / monitor sc.?
for me i had a contract in my pld pos.(sc).
muthu

Firefox 29 When I right click to open in a new tab, the tab will open but it will be a blank page. Tried Firefox Safe Mode & with Ad On Disabled Nothing

When I right click to open in new tab, the new tab will open but the page is blank. I have tried it in Firefox Safe Mode & with Add Ons Disabled, still doesn't work.

Hi UKBlue,
Is your new tab page set to about:blank? You can change this from the about:config page or you can restore defaults by resetting Firefox.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Condition Type appear twice in PO Header in Change mode

Hi Gurus,
I have done the following steps:
1. I have created an import PO and added few Freight Conditions in the header, and Customs Condition in Line item
2. I have booked a customs invoice against the PO. (MIRO posted for Planned Delivery Costs)
3. Now when I go to the change mode of the PO, then in the header I can see same condition type twice, one with the value maintained earlier and another with value 0.
Issue:
I should not be seeing the condition type twice in header.
Please help me resolve the issue as early as possible.
Thanks in Advance.
Regards,
Ankush

Hi Ankush,
Make sure that header conditions are marked as header only and same for item condirions in m/06
try creating a new PO after making these changes
Reg
Dheeraj

Delivery Output Type not updated automatically in change mode

Hello,
I am dealing with a strange problem.
If i open delivery to change using VL02N then, output type configured for reissue is updated properly and on save ouput type is getting successfully processed also.
Now if i open VL03N and then using change mode button on application toolbar i go to change of delivery, then output type is not getting created. The issue was figured out when i tried to open delivery from shipment and then using change button i tried to change and save delivery....
Expectiing solution from experts.
Thanks
Hari

Hi,
May be this behaviour is due to the application in which you are opening the delivery. When you open the delivery from shipment, check the transaction code in the screen in system status. If it is VL03N, then it is correct. But if it is VT03N, then it is expected that even in change mode, the output is not triggered. Pls check this once.
I tried the same thing in an invoice from where i opened a SO and then went in change mode, and the otuput is getting retriggered.
I hope teh configuration of your output is correct. Ensure that the Multiple Issuing button is ticked on, if you want yoru output type is to be triggered everytime you go in change mode.

How to Grey out the field "tracking number" during change mode in the order

HI Expert,
How to grey out the Tracking number (AFVGD-BEDNR) at Order -> Operation tab -> external tab ->tracking number.
during creation IW31 = not grey out and allow entry.
for change mode IW32 = grey out
if i set grey out at config OIOPD, it will grey out even during creation mode.
Please advise
Thanks
Regards

Hi
I think Using field selection it is not possible to make as display ,kindly check with screen or transaction variant -SHD0
regards
thyagarajan

Jump from Sales Order to Purchase Order and back again (all in change mode)

Hi,
Situation is this:
- Sales Order is created with 10 items. 4 items are created with connection to Purchase Order.
- User open Sales Order in change mode
- User goes to item 20 that has a related Purchase Order
- User wants to jump to related Purchase Order and make an update here
- User wants to be able to jump back to Sales Order Item 20 from Purchase Order
When user jumps to Purchase Order in change mode, then this Purchase Order will also block the same Sales Order, that was open. This can be handled with dequeue and enqueue.
Problem is that when Purchase Order is saved it will make an update to the Sales Order in the background. When user jumps back to Sales Order then this Sales Order is still open with old data and these data does not reflect data that can have been updated by the Purchase Order.
Also: When Purchase Order is making updates to the Sales Order then e.g. Message Out Table NAST is automatically updated (insert and delete records). If user then manually updates the Sales Order with old information, then System Dump appears as Sales Order tries to insert NAST records, that have already been inserted or delete NAST records that have already been deleted via the Purchase Order.
This means that when user jumps back from Purchase Order to Sales Order Item 20 then Sales Order needs to be refreshed with new data after Purchase Order has saved the Sales Order.
Are there any solution to do this in a standard way (from within SAPMV45A) ?
I prefer not to reopen Sales Order using syntax like CALL TRANSACTION.

Hi,
Thanks for reply.
In third party PR gets created automatically but PO gets create manually.So changes get refelect in PR only not in PO.
Can you give me the solution for completing this task.
Thanks & Regards
Jalaj garg

Change flag deactivaion for PO output message type during change mode

Hello All,
WE are using automatic message output determination functionality for PO output type. This output type has been configured for creation and change mode under Fine tuning.
Two output type are configured, for example ZAAA is output type for ALE and output type ZBBB for archiving.
Here archiving functionality is used to transfer attachment from ERP system to SUS supplier portal as a pdf file. This is done via enhancement and the attachment transfer is working fine.
During creation mode both the output types are determined and successfully processed and as a result attachment is transferred to supplier portal which is absolutely correct. In the attachment all PO line item can be seen which works well.
Now I change the PO and add a new PO line item, system automatically default both the output type for change mode and upon saving both the output type are successfully processed.
Now here is the problem in change mode only the added PO line item is sent as an attachment to the supplier portal. Here the requirement is see all the PO line items including the once which were newly added.
Solution is if we uncheck the change flag for output type ZBBB during change mode then all the PO line item can be seen under the new attachment with new version.
Please let us know how this functionality can be acheived ... is there an user exit available.
We have a work around where we are running a background job every 3 mins and based on the last successfully processed message for output type ZAAA we are attaching first output type ZBBBfor archiving the changes and then ZAAA for sending the changes along with attachment to Supplier portal.However this solution is a temporary one , we need a concrete solution for this.
Please advise.
Thanks,
Yatin

Hello All,
Thanks for the reply,
But we cannot modify the existing print program as this print program is being used in different countries also.
We already know a solution that during change mode if we remove the change flag from output type ZBBB then all the PO line items along with the recent changes can be seen under the attachment under supplier portal.
The question comes now, how do we automate this processu2026 Is there any standard progam or user exit available.
Manually, if you add a message type ZBBB in ME22N tranasction for creation mode then all PO line item with recent changes get transferred but we need to automate this process for create and change PO transaction.
Thanks,
Yatendra

Sales Item's Qty is disabled in change mode (VA02) of Sales Order.

Hi,
1) We create Sales order (L2) from Service Order(DP90 tcode), system automatically selects 'LABOR HOURS' material, based on actual hours posted for a service order and adds this as 1st line item in Sales Order. When order is saved and we go back to VA02, we find that LABOR HOURS item is disabled, meaning we cannot change Qty but can only change Amount. The item is not billed yet.
2) If we add 2nd line item with same 'LABOR HOURS' material in change mode(VA02), Ssave and get back to VA02 again, this item is enabled. We want to make the 1st Line item's qty enabled so users can change the qty before creating billing document.
Since the 1st line item is created from DP90 tcode, system does not allow us to change the Qty ? Any help is appreciated.
Niranjan

Hi Jelena,
Thanks once again for your time and responding back.
If you remember, I had mentioned that we are creating Sales order from DP90 tcode. We had created a custom screen(and tcode) called ZWIN where we had provided a button to create Sales order from Service Order using DP90 tcode. In this custom screen, we were calling BDC for DP90 and creating Sales order. On the same custom screen, we had given option where users could enter other materials. For these extra materials added, we were using BAPI 'BAPI_SALESORDER_CHANGE', to add these new materials. Here is how I fixed it.
1) DP90 would have created sales order with Item 10 for LABOR HOURS.
2) Then 'BAPI_SALESORDER_CHANGE' would have added any extra materials selected on Custom screen.
3) While calling this BAPI, I deleted Item 10 with LABOR HOURS and added new Line Item 11 with same LABOR HOURS.
Now when I get into VA02, I see that LABOR HOURS line is enabled, which means we can change Qty.
This avoided deleting line item and adding same item in VA02 when there was a change in qty later.
Thanks again.
Niranjan

Apple 23" display, using MacBook V2.1 in boot camp mode with XP Professi

My MacBook has the Intel 950 Graphics card, In Boot camp mode with Windows XP Professional SP3, is there any way to get full screen resolution on the 23" Apple monitor. The windows screen has about 2" of black on all sides of the window

no, tdm doesn't work under bootcamp regardless of which windows is being used, imho i don't think it will ever work under bootcamp

Changing mode with HS-950

Similar Messages

Maybe you are looking for