Changing modes of volume / vibration / silent?

Hello guys!
I have a problem with my z1, always when i tap my volume button down the phone goes to total silent mode, without vibration. I want it to vibrate even if I tap the volume all the way down.
This is a problem because Im always just tapping the volumebutton a couple of times and then I dont hear it/feel it when someone is calling/texting. I know that this is different in z2. Is it possible to implement on my z1 aswell??
Kind regards, Linus

You have a quick option to turn your phone to silent mode with vibration or turn both off - Swipe doen from the top of the screen and select quick settings then tap the sound icon - If you don't have it then tap edit and then tick the sound box
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

Vibrate / Silent function has a mind of it's own!

Hi guys and gals,
OK so I've signed up as I've just discovered a fault with my iPhone3 3GS, done a bit of googling and found others have had the same problem, wanted to see what you guys thought of it.
I bought the phone August 2009 brand new. After months of me thinking I am going mad and that I am coming down with the infamous 'vibrating phone syndrome' where you think your phone vibrated in your pocket but it did not - I have finally discovered the phone is indeed vibrating for no reason!
When in silent mode, if the phone is touched in a certain way or is squeezed gently near the top left corner, it will take itself out of silent mode and when released it will go back into silent mode and will vibrate! This is very annoying! It happens all the time!
I have tried other iPhones (3GS and 3G) and they do not do the same thing. There must be something wrong with the switch maybe? If so, what? Can I get a replacement (as I don't want a repair - £550 is much too much to pay for something and then have some guy take it apart and fiddle about in it after only 10 months)? And how do I go about getting this done?
TALK TO ME
Thanks

I almost neverswitch my phone to ring, ever since i got my phone almost a year ago, I've prefered it on silent. A few days ago my phone started randomly switching from ring to silent and back without the switch ever being touched. I know that the switch was not move because i have a case that covers it and also i can literally look at the switch, not even touch it, and my screen will show that it is frantically switching back and forth from silent to ring.

Is it possible to setup my Do Not Disturb mode not to vibrate but to let banners appear when I receive new messages?

Hey!
I just got a new iPhone 5S and I've been trying to adapt it to my needs.
I do remember that on my 4S, I only switched between silent (with vibrate) and do not disturb modes.
When I was using the phone on do not disturb, it did not vibrate but a banner appeared when I received a new SMS or Whatsapp.
Unfortunately, I haven't been able to reproduce this on my new phone.
Now it seems that I have to choose, when in do not disturb mode, between a completely silent phone (no vibrate and no banners) or a vibrating phone + banners when I receive new messages...
Can you help me?
Thanks a lot.
Thiago

Thank you for your answer.
Unfortunately, when I do this DND also disables notification banners... So when I receive a message I don't even know I did...
I'm going to try to be clearer: when the phone is not in use, it works just as I want it to. When only in Silence mode, it vibrates when I get something new; when on DND mode, it is completely muted.
My problem is when I'm using the phone on DND mode (for example: on the bed next to my girlfriend who is asleep), I would like to have banners for SMS and Whatsapp, but no vibration, so as to know that I got a message but discretely.
If I put on Silence notifications > Always, it does not vibrate, which is good, but it doesn't show me that I got a message at all. If i put on Silence notifications > Only while iPhone is locked, it vibrates when I receive a new message

Sometimes lose audio when changing modes SB X-FI Titanium HD

When I change between game and entertainment, sometimes I lose all audio until I reboot. I have a SB X-FI Titaium HD and use DTS encoding. Also for some reason any time I reboot or change modes my receiver goes into "stereo" mode, and I have to manually change it back to DTS. Normally stereo signals show up as Pro Logic mode, and normally it detects DTS/DD and changes by itself. Any Idea why I'm losing sound, or what is kicking my Onkyo receiver into STEREO mode? I still hear the DTS, just only on left and right, downmixed. Once I manually change to DTS it works fine. Had this receiver for 7 years or so, and the only time I have ever seen it just say STEREO before is if I push the "stereo" button.
I'm on Windows 7 64-bit, nvidia GTX 570, nvidia 780i w/ Core 2 Duo

devilyang01 wrote:
In fact, whenever the sound loss occurs, if i try to so much adjust any sound related stuffs i.e. changing speaker settings, muting or adjusting volumes (sometimes), my pc locks up. If i'm quick enough to shut the pc down before a lock up, the pc gets stuck at the shut down screen.
Same problem + BSOD, when i try adjust any sound related settings.
I tried to use the contact form with the main site, but "send" button does not work.
Where does this problem come from?. A year ago everything was fine, it began on the rise since the end of summer. And do not use latest nvidia 285.62 drivers with latest x-fi drivers, If you had previously lost sound, with them even worse(video drivers works fine, but the sound drivers?, well, you know), the sound began to disappear almost every hour, use the older 275.xx series and below.

Change mode of the excise invoice is showing zero excise values

H ifriends,
The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
Thanks
Sasi

s

Restrictions in change mode

Hello experts!
I have to modify an Z report. When I switch to change mode, appears the text in gray, and the edit, replace insert buttons, the same buttons when you try to edit an standard program.
But in program atributes, the editor lock is uncheched !!! This is amazing. This program is a copy of an standard program.
Pls help me to edit this program in the ordinary way, because I need to do a lot changes.
Thanks in advance
Pablo

Hi,
You can switch off modification assistance.
menubar - edit - Modifications operations - Switch off Assistance.
thnx,
Ags.

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Excise invoice number showing display option in J1IEX change mode.

Hi CIN Experts,
We are using E.C.C6.0.
In Excise transaction T.code: J1IEX Change option, Official Excise invoice number (J_1IEXHEAD-EXNUM) showing the display mode. How can change the Official Excise Document Number is display mode to change mode in T.code: J1IEX change option.
In 4.7E system showing the change option in T.code: J1IEX change mode.
Regards,
Hanuman

We cannot change this field from display to change. Once the excise invoice is captured the excise invoice number is freezed.
It is SAP Standard & to break this you would need the access key from SAP.
If the change in excise invoice number is by user mistake, please cancel the excise invocie and capture the new one.
Thanks & regards
Hameed Parvez

P.O Error in Process after copying the existing item in change mode

Hi All,
We are in SRM 5.0 Server 550 and SP15 and are using Extended Classic Scenario.
We are facing a peculiar issue, when an already created P.O (Free text - goods) is changed and a new line item is added either manually or by copying the existing line item and then ordering it, the P.O is going into Error in Process status.
This is happening only when i am adding a new item (material) to the existing line item (material) but when i am adding a service line item in the change mode to the existing material line item, the P.O is getting ordered without any issue.
I believe this is SAP bug and raised with SAP for OSS.
Meanwhile i would be grateful if you can provide any resolution to this issue and provide any OSS note number (If one already exists).
Regards,
Teja

Hi Teja
it works fine for me.
old po template..
taken describe procureemnt - goods
copy the line item
changed qty and price
POs created for both items in one PO since vendors are same?
what the error message says in the application monitor or rz20 / monitor sc.?
for me i had a contract in my pld pos.(sc).
muthu

How to - only display the price of approved PO (not change mode)

Hi,
Following are our PO release strategy
1. Release id : P has
a. Released indicator (tick)
b. Changeablity - 4
The above setup is working fine, means still after the approval users can change all the fields. New strategy is triggered once the values are changed.
Now the issue is business owner does not want the price, qty in change mode after approval. After approval ME22N to show
1. Price & qty to be in display mode
2. All other fields (except the one which affects PRICE) in change mode.
I tried to all the combinations, but after approval I get to see either all the fields in display mode or all in change mode.
Is it possible to display the price related fields only for the approved PO in ME22N.
Please advice
Thanks,
Raj.

Hi Mani,
Thanks for the fast reply.
1. There is no ME22N - Fsel Key available.
2. Only for the approved PO - we want the price fields in display mode.
3. There is no restriction required for the un approved POs.
Is there any way.
Please reply
Thanks
Raj.

How to find out what users have an order open in change mode

Is there a table I can easily query to determine which user has a specific order (VBAK) open in change mode?
Will give points of course.

HI,
Use this function module. This will return you the list
CALL FUNCTION 'ENQUEUE_READ'
                EXPORTING GCLIENT = GCLIENT
                          GUNAME = GUNAME
                          GNAME   = GNAME
                          GARG    = GARG
                IMPORTING SUBRC   = SUBRC
                TABLES    ENQ     = ENQ
Thank
Mahesh

Condition Type appear twice in PO Header in Change mode

Hi Gurus,
I have done the following steps:
1. I have created an import PO and added few Freight Conditions in the header, and Customs Condition in Line item
2. I have booked a customs invoice against the PO. (MIRO posted for Planned Delivery Costs)
3. Now when I go to the change mode of the PO, then in the header I can see same condition type twice, one with the value maintained earlier and another with value 0.
Issue:
I should not be seeing the condition type twice in header.
Please help me resolve the issue as early as possible.
Thanks in Advance.
Regards,
Ankush

Hi Ankush,
Make sure that header conditions are marked as header only and same for item condirions in m/06
try creating a new PO after making these changes
Reg
Dheeraj

Delivery Output Type not updated automatically in change mode

Hello,
I am dealing with a strange problem.
If i open delivery to change using VL02N then, output type configured for reissue is updated properly and on save ouput type is getting successfully processed also.
Now if i open VL03N and then using change mode button on application toolbar i go to change of delivery, then output type is not getting created. The issue was figured out when i tried to open delivery from shipment and then using change button i tried to change and save delivery....
Expectiing solution from experts.
Thanks
Hari

Hi,
May be this behaviour is due to the application in which you are opening the delivery. When you open the delivery from shipment, check the transaction code in the screen in system status. If it is VL03N, then it is correct. But if it is VT03N, then it is expected that even in change mode, the output is not triggered. Pls check this once.
I tried the same thing in an invoice from where i opened a SO and then went in change mode, and the otuput is getting retriggered.
I hope teh configuration of your output is correct. Ensure that the Multiple Issuing button is ticked on, if you want yoru output type is to be triggered everytime you go in change mode.

How to Grey out the field "tracking number" during change mode in the order

HI Expert,
How to grey out the Tracking number (AFVGD-BEDNR) at Order -> Operation tab -> external tab ->tracking number.
during creation IW31 = not grey out and allow entry.
for change mode IW32 = grey out
if i set grey out at config OIOPD, it will grey out even during creation mode.
Please advise
Thanks
Regards

Hi
I think Using field selection it is not possible to make as display ,kindly check with screen or transaction variant -SHD0
regards
thyagarajan

Change the Sold to Party(SP) in sales order in change mode

Hi,
Is it possible to change the Sold to Party(SP) in sales order in change mode?
If yes then How??
Regards
Somnath

Hi somnath,
It is very much possible to change the sold-to-party in the change mode of Sales order(VA02).
Goto VA02-->enter the sale order number.
Press enter.
In the overview screen if you change the sold-to-party then every thing will be redetermined(Taxes and pricing procedure etc...).These will be determined from CMr etc.
You cannot change the sold-to-party at the partners tab that is present in the Header details.
It will be greyed out.
If you change the sold-to-party at the overview screen as suggested earlier it will not apply to the item.
You are also going to see this message while changing.
And finally save the document.
Regards,
Krishna.

Changing modes of volume / vibration / silent?

Similar Messages

Maybe you are looking for