Changing music format

I'm trying to download music to my verizon phone and it says it does not support the format- can the format be changed on my computer to transfer over to the phone?

Twila,
It will depend what format the songs are to start with and what you want them to end up being.
Have a look at this article in the Apple Knowledge Base.
If the songs were purchased from iTS, have a look at this post .

Similar Messages

How can i change music format to WAV prior to downloading?

how can i change music to WAV prior to downloading?

cg larry wrote:
how can i change music to WAV prior to downloading?
When you download music, it comes in the format that the store supplies it.
WAV is a common format for the DJ market, as it is the best as input for pro audio editing. Stores that cater to this market, and from which you can buy music in WAV format, include beatport.com and Juno Download
Both of them also offer MP3/320 as an option, so make sure to select WAV.

How can I change the music format of my songs?

How can I change the format of songs in my computer so itunes will recognize them?
Music is recorded in my computer but itunes doesn´t seem to read it.

You know, its kind of weird. The songs where in a friends i-pod; that I uploaded into my computer using the instructions found in one of these forums. Then I downloaded the music into my i-pod and it was ok.
After a few months it occurred to me to consolidate my library. After consolidating my library; itunes can´t read about 7GB´s of music. I haven´t connected my ipod into my computer since then because I fear the music will be lost.
The music is stored in my computer, some of it I can listen with the windows media player. I just can´t get itunes to recognize it.
If I sync my ipod will I loose the 7GB of Music?

I made a new playlist on ituns and changed the format to MPS, but I still cannot get it moved to my SD in that format...help?

I made a new playlist on ituns and changed the format to MPS, but I still cannot get it moved to my SD in that format...help?

Ok, so you said you've already right clicked on each song and "created a MP3 version?"
If so sort the library's music by "Date Added (if it is not there right click on the other sort bars and add the column "Date Added". The mp4 versions are the ones in the playlist. You will have to find the newly added mp3s by sorting by Date Added. Hope this helps!

How do I change the format of my 5th Generation iPod from Windows to Mac

How do I change the format of my 5th Gen iPod from a Windows format to the Mac?

But this will delete all the songs I have? I have a lot of them on my iPod classic
Yes.
I want to transfer (well copy) all my songs from the iPod to itunes on the mac - and then have the itunes library as being placed on the external drive. The last part I think I know, but I can't work out how to copy music from my iPod
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Then see here about backing your iTunes library onto an external hard drive.
iTunes: Back up your iTunes library by copying to an external hard drive
B-rock

Can I change the format of my iPod?

Hi,
I hope someone out there can help me this. When I got my iPod I had a PC so it was formatted to that. I now have a MacBook and I would like to change the format of my iPod from PC to Mac so that I can udate the iPod format. Is this possible and if so how do I do it?
Cheers guys,
Symmsie xx

Try Senuti.
It's a program that transfers music from iPod to iTunes on a Mac.
As is Music Rescue.
Both of these should work with a Windows formatted iPod because Macs can read and write to FAT32 formatted drives.
After that you can reformat the iPod on your Mac as posted above.
And welcome to the world of Macs. As a switcher myself some years ago, I can tell you you will not be disappointed.

Itunes cannot sync certain music formats

My Itunes cannot sync my music to my iphone - it says there has been an error when transferring to the phone. How could I change the format of the song before creating a playlist and syncing to my phone please?

The iPhone supports these formats, which are supported with iTunes.
.Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV.
iTunes includes an option to create an AAC version for an existing song or music file. With the song or music file selected in iTunes, at the iTunes menu bar go to Advanced and select Create AAC version. This will duplicate the existing song or music file in an AAC version. The original will not be replaced or deleted.

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

Changing date format at reporting level

Hello,
Will u plz tell me how can i change the date format at reporting level?
I want to display date in dd/mm/yyyy, but by default its showing mm/dd/yyyy.
Delta is already loaded in the system, so i don't want to disturb regular data loading.
Is there any way so that i can change the format of date.
Plz help me out.
Thanks,
Regards,
Steve

Hi steve
There r so many postings on the same topic
go through these previous threads
date format
Date format
u can find solution
regards
Ravi Kiran

OAF changes Date Format

Hi
I need to store a date into a flexfield. We have enabled the Flexfield and there is NO value set attached to it.
This attribute is already in the VO as a varchar, so we have just added a new column into the page as data type Date and link it to the flexfield column.
In this page we have a table layout so the user can enter 10 rows before saving them. And this page it just used to punch data into a table, which means, once the user press apply the page saves and clears. The user can not query on that page.
When entering the first row, we can open the Date picker and we can choose the date and then it populates the column as “DD-MON-YYYY”.
The problem is:
When we entering the second row after entering one column the pages changes the format of my date from the previous record to “YYYY-MM-DD”, then after entering any second column the pages clear the date from the previous row.
Running the page from JDev it shows the following message before clears the flexfield:
java.text.ParseException: 2011-01-28
Note we have not extended the VO and not extended the controller.
My questions are:
1) Why the Self-Service is change the date format to YYYY-MM-DD even if the profile ICX: Date Format Mask (31-DEC-1999) and my preference is set to DD-MON-YYYY?
2) How can I avoid this to happen? Is there any way to keep my date as DD-MON-YYYY?
Thanks,
Alex

Alex,
That was the update from Oracle support, when we raised it,
But I did the following to handle that, I feel this is not the right way, since we had that issue as SEV1, I did that as a workaround,
Check this this might help.
package oracle.apps.xxper.selfservice.appraisals.webui;
import com.sun.java.util.collections.HashMap;
import java.io.Serializable;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.webui.*;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.form.OASubmitButtonBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageCheckBoxBean;
import oracle.apps.per.selfservice.appraisals.ApprConstants;
import oracle.apps.per.selfservice.arch.webui.PerOAControllerImpl;
import oracle.apps.per.selfservice.common.webui.CommonCO;
import oracle.apps.per.selfservice.compgaps.Constants;
import oracle.apps.per.selfservice.appraisals.webui.MAFinalRatingsPageCO;
import oracle.apps.fnd.framework.server.OADBTransaction;
import oracle.apps.fnd.framework.OAViewObject;
import java.sql.CallableStatement;
import java.sql.ResultSet;
import oracle.jbo.Row;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageDateFieldBean;
import oracle.apps.per.selfservice.appraisals.server.AppraisalVORowImpl;
public class XXPERMAFinalRatingsPageCO extends MAFinalRatingsPageCO
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
writeLog("XXPER",pageContext,"Start PR XXPERMAFinalRatingsPageCO ");
OAMessageDateFieldBean dateBean =(OAMessageDateFieldBean) webBean.findChildRecursive("DeliveryDateTime");
if(dateBean !=null )
String dateBeanValue = (String) dateBean.getValue(pageContext) ;
writeLog("XXPER",pageContext,"dateBean Value "+dateBeanValue);
if(dateBeanValue !=null)
if(dateBeanValue.indexOf(".0") !=-1)
dateBeanValue = dateBeanValue.substring(0,dateBeanValue.length()-2);
writeLog("XXPER",pageContext,"dateBean Updated Value "+dateBeanValue);
String dateMaskQry = "SELECT value FROM V$NLS_Parameters WHERE parameter ='NLS_DATE_FORMAT'";
writeLog("XXPER",pageContext,"dateMaskQry "+dateMaskQry);
String dateMask = (String) executeSql(dateMaskQry, pageContext, webBean);
writeLog("XXPER",pageContext,"dateMask : "+dateMask);
String dateConvertQry = "select to_char(fnd_date.canonical_to_date('"+dateBeanValue+"') ,'"+dateMask+" HH24:MI:SS') from dual";
writeLog("XXPER",pageContext,"dateConvertQry "+dateConvertQry);
String convertedDateValue = (String) executeSql(dateConvertQry,pageContext,webBean);
writeLog("XXPER",pageContext,"convertedDateValue "+convertedDateValue);
if(convertedDateValue == null )
convertedDateValue = dateBeanValue;
dateBean.setValue(pageContext,convertedDateValue);
writeLog("XXPER",pageContext,"After set the value "+convertedDateValue);
setAttribute3(pageContext, convertedDateValue);
writeLog("XXPER",pageContext,"After set the VO value "+convertedDateValue);
}else
writeLog("XXPER",pageContext,"dateBean value is null from the bean Get the value from getAttribute3() method");
dateBeanValue = getAttribute3(pageContext);
dateBean.setValue(pageContext,dateBeanValue);
}else
writeLog("XXPER",pageContext,"dateBean is null ");
writeLog("XXPER",pageContext,"End PR XXPERMAFinalRatingsPageCO ");
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
writeLog("XXPER",pageContext,"Start PFR XXPERMAFinalRatingsPageCO ");
writeLog("XXPER",pageContext,"Event Param "+pageContext.getParameter(EVENT_PARAM));
OAMessageDateFieldBean dateBean =(OAMessageDateFieldBean) webBean.findChildRecursive("DeliveryDateTime");
if(dateBean !=null )
String dateBeanValue = (String) dateBean.getValue(pageContext) ;
if(dateBeanValue !=null)
if(dateBeanValue.indexOf(".0") !=-1)
dateBeanValue = dateBeanValue.substring(0,dateBeanValue.length()-2);
writeLog("XXPER",pageContext,"dateBean Updated Value "+dateBeanValue);
String dateMaskQry = "SELECT value FROM V$NLS_Parameters WHERE parameter ='NLS_DATE_FORMAT'";
writeLog("XXPER",pageContext,"dateMaskQry "+dateMaskQry);
String dateMask = (String) executeSql(dateMaskQry, pageContext, webBean);
writeLog("XXPER",pageContext,"dateMask : "+dateMask);
String dateConvertQry = "select to_char(fnd_date.canonical_to_date('"+dateBeanValue+"') ,'"+dateMask+" HH24:MI:SS') from dual";
//String dateConvertQry = "select fnd_date.string_to_canonical('"+dateBeanValue+"','"+dateMask+" HH24:MI:SS') from dual";
writeLog("XXPER",pageContext,"dateConvertQry "+dateConvertQry);
String convertedDateValue = (String) executeSql(dateConvertQry,pageContext,webBean);
writeLog("XXPER",pageContext,"convertedDateValue "+convertedDateValue);
if(convertedDateValue == null )
convertedDateValue = dateBeanValue;
dateBean.setValue(pageContext,convertedDateValue);
writeLog("XXPER",pageContext,"After set the value "+convertedDateValue);
setAttribute3(pageContext, convertedDateValue);
writeLog("XXPER",pageContext,"After set the VO value "+convertedDateValue);
}else
writeLog("XXPER",pageContext,"dateBean is null ");
writeLog("XXPER",pageContext,"End PFR XXPERMAFinalRatingsPageCO ");
super.processFormRequest(pageContext, webBean);
writeLog("XXPER",pageContext,"End PFR XXPERMAFinalRatingsPageCO (After Super Call )");
public void writeLog(String moduleName, OAPageContext pageContext, String diagText)
if(pageContext.isLoggingEnabled(OAWebBeanConstants.STATEMENT))
System.out.println(moduleName+" : "+diagText);
pageContext.writeDiagnostics(moduleName,diagText,OAWebBeanConstants.STATEMENT);
* Method to execute SQL.
public Object executeSql(String pSqlStmt, OAPageContext pageContext , OAWebBean webBean)
OADBTransaction tx = pageContext.getApplicationModule(webBean).getOADBTransaction();// (OADBTransaction)getOADBTransaction();
Object lObject = null;
// Create the callable statement
CallableStatement lCstmt = (CallableStatement)tx.createCallableStatement(pSqlStmt, 1);
ResultSet rs = null;
try
rs = lCstmt.executeQuery();
while(rs.next())
lObject = rs.getObject(1);
catch (Exception e)
//throw OAException.wrapperException(e);
finally
try {
if(rs!=null)
rs.close();
if(lCstmt != null)
lCstmt.close();
catch(Exception e) {
throw OAException.wrapperException(e);
return lObject;
} // executeSql
public void setAttribute3(OAPageContext pageContext, String dateValue)
OAApplicationModule rootAM = pageContext.getRootApplicationModule();
OAApplicationModule apprAM = (OAApplicationModule)rootAM.findApplicationModule("AppraisalsAM");
OAViewObject appraisalVO = (OAViewObject)apprAM.findViewObject("AppraisalVO");
writeLog("XXPER",pageContext,"appraisalVO "+appraisalVO);
if(appraisalVO !=null)
AppraisalVORowImpl appraisalVORow = (AppraisalVORowImpl) appraisalVO.getCurrentRow();
if(appraisalVORow !=null)
int attrCount = appraisalVO.getAttributeCount();
writeLog("XXPER",pageContext,"Attrbuute count "+attrCount);
String[] attributeNames = appraisalVORow.getAttributeNames();
appraisalVORow.setAttribute3(dateValue);
public String getAttribute3(OAPageContext pageContext)
OAApplicationModule rootAM = pageContext.getRootApplicationModule();
OAApplicationModule apprAM = (OAApplicationModule)rootAM.findApplicationModule("AppraisalsAM");
String attribute3Value = "N";
OAViewObject appraisalVO = (OAViewObject)apprAM.findViewObject("AppraisalVO");
writeLog("XXPER",pageContext,"appraisalVO "+appraisalVO);
if(appraisalVO !=null)
AppraisalVORowImpl appraisalVORow = (AppraisalVORowImpl) appraisalVO.getCurrentRow();
if(appraisalVORow !=null)
int attrCount = appraisalVO.getAttributeCount();
writeLog("XXPER",pageContext,"Attrbuute count "+attrCount);
String[] attributeNames = appraisalVORow.getAttributeNames();
writeLog("XXPER",pageContext," AppraisalId :- "+ appraisalVORow.getAppraisalId());
attribute3Value = (String)appraisalVORow.getAttribute3();
String attribute1Value = (String)appraisalVORow.getAttribute1();//getAttribute2
String attribute2Value = (String)appraisalVORow.getAttribute2();
writeLog("XXPER",pageContext," attribute3Value :- "+attribute3Value + " attribute1Value "+ attribute1Value +"attribute2Value "+attribute2Value);
}else
writeLog("XXPER",pageContext," appraisalVORow is null ");
}else
writeLog("XXPER",pageContext," appraisalVO is null ");
return attribute3Value;
}

How to change the format of a cell in a web report

Hello experts,
Is it possible to implement this in a Web Report/BEx query?
We have a list of products grouped into Company A and Company B. One key figure is for example Net Cost Price.
We need to highlight the lowest net cost price in every company but with a different colour depending on the company assuming prices are sorted in ascending order.
We have been recommended to use Web Design Api for Tables but we understand that in order to format a cell content we need to know the axis position of the cell but we don't know how many rows the query will display for every company. Is this kind of requirements only possible with "static" reports where we know exactly the number of rows and columns that are going to be displayed?
This is an example.
COMPANY      PRODUCTS    NET COST PRICE
Company A    Product 1    <b>5</b>
             Product 2    10
Company B    Product 1    <b>10</b>
             Product 2    20
Any help would be very much appreciated.
Thanks in advance,
Inma

Hi Inma,
If you have already not solved your problem , you can try the following solution with table interface class.
Table interface class generates HTML table row by row so it first process the charecterstics and then KFs .
You define a attribute(type public) in class and set that attribute to X (In CHARECTERSTIC menthod)when ever the company code changes.
Then make use of that flag in DATA method to change the format of cell (Assuming you sorted by Ascending).
hope this helps.
Regards
Madhukar

Is there a way to use my iPhone 4S as a remote to change music on my iPod touch

Is there a way to use my iPhone 4S as a remote, to change music on my iPod touch, while it is in a docking station?

No.

How to change the format in sap script

Hi,
I am working on a report which calls a sap script and i have to modify the script i.e. the values which are displaying in it. i had never worked on SAP SCRIPTS ,plzz provide me guidlines how to change the format of the data displayed in it.

hi,
this will give you the whole idea about the scripts in SAP the t-code is SE71.
refer this link::
[SAP SCRIPTS|http://help.sap.com/saphelp_40b/helpdata/en/d6/0dc169494511d182b70000e829fbfe/applet.htm]
[WIKI|https://wiki.sdn.sap.com/wiki/display/ABAP/FormPrinting-SAPscript%2CSmartforms]
regards
sarves
Edited by: Sarves Sombhatla on Feb 20, 2009 1:38 PM

How can i change the Format of my DATE column?

I need to change the date format for a whole column. At present i can do MM-DD-YYYY. I need to change this this to DD-MMM-YYYY.
I know about the to_date function, i tried to apply it to change the format of my whole column by doing the following.....
CREATE TABLE "IT220_DATEHOLIDAY"
"DEPARTID" VarChar(2)NOT NULL ENABLE,
"HOLCODE" VARCHAR2(2)NOT NULL ENABLE,
"DEPARDATE" DATE,
to_date('DATE','DD-MMM-YYYY'), <<<change DATE column to DD-MMM-YYYY
CONSTRAINT "DATEHOLIDAY_PK" PRIMARY KEY ("DEPARTID") ENABLE
ORA-00902: invalid datatype <<<<This was the error message i received.
I am aware that the to_date function is supposed to be used to change strings into a certain format. I guess this means you cant do it with columns? Is there anyway i can format the whole column or do i have to do each string of data entered one by one?
Thanks in advance!

Hello Jay,
I'm not sure you hit the right forum, as this doesn't seem to be a problem with APEX.
Anyway:
You can't use that function on a table like that, and as you already suggested, the to_date-function expects a string value.
It seems you also have a misunderstanding of the basic datatypes in the database. DATE is such a datatype and is stored an internal format you don't need to care about. Each time your request the value, the database will give you a string representation according to either your locale or you give a certain formatting mask.
The same applies to insert or update operations: you hand in either a variable of type DATE or use a function like to_date to create an "object" of type date.
You may be interested in reading the documentation of the [url http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/toc.htm]Oracle Database Concepts. The section concerning datatype DATE can be found here:
http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/tablecls.htm#CBBGJHJC
An overview of formatting options can be found here:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements004.htm#SQLRF00212
So to answer your question: You would format it as part of your insert operation, taking a string and convert it using to_date.
-Udo

How to do (if possible) a bulk change of formats

Is there a way I can create a bulk change of formats? That is to say, I have six pages multiple frames of text (and graphics) with all kinds of different fonts, points, colors, effects etc.
I want to (as easily as possible) conduct a mass change where everything will be reformatted to (for example), Times new roman 12 point.
I would imagine I could create a paragraph style sheet and then go touch all the text boxes one at a time, but I was hoping for one click (ha ha ) and it is done.
Am I smoking funny stuff, or do I have to do it the old fashioned way. One text box at a time.
Bob

Bob,
InDesign "remembers" which values to change if you change the Paragraph Style, courtesy of this simple rule: If it is the same number in the text as in the style, it gets changed. Otherwise, it must've been some sort of override, and it's preserved.
Alt+clicking the paragraph style on your entire document resets
i everything
-- intended or not. Since that's what you wanted, no further problems. If you ever get into a spot where you
i don't
want to reset everything (because you manually fiddled), you can try this handy trick:
* find out what the "wrong" size is -- the one you want to kill.
* change the size in the paragraph style to the "wrong" size. Every paragraph with the style will get this applied. Exit the Paragraph Style options (so it will "take")
* Re-visit the Paragraph Style options and put in the right size. All and only the size overrides will have disappeared; the rest of your overrides stay in place.
This works with everything (as far as I'm concerned) you can change in Paragraph Styles, and as a matter of fact, also in Characters styles (and probably in Object styles and Table styles as well).

Changing music format

Similar Messages

Maybe you are looking for