Changing NACHA File output format

Is it possible to change the layout for NACHA output file? We sent the output file to our Bank and we have two issues in that file. One is there is extra header that the NACHA is adding which comes after the two headers we have defined in the Pay Method. The bank does not like that. The Second is the routing number at the end of each employee record needs to be shifted 2 characters to the right. How would anyone do these changes? If someone can help me with this ASAP that would be great.
Thanks

Thanks for your reply. We found out that an ID was missing in NACHA rules which was the reason for the routing number to be off. But still there is an extra header which Bank is not accepting. As long as it is just a header we are okay to manually delete the header and send to bank.
Thanks again.

Similar Messages

  • IPhoto: After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file.

    After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.

    Hmm the advice has been not to use referenced libraries - you ignored and did it anyway and you find the advise not helpful
    Furthermore the advice is that if you choose to use a referenced library that you assure that the path never changes - you also choose to ignore that advice and do it anyway - and you blame the peopson trying to help you
    once again - you have one choice - change the file names back and put the files back in the exact same place - and again you are totally ignoring the advice and instead name calling and attacking the person giving you advice
    Maybe life would be easier if you followed advice rather than ignoring it and then complaining that things no longer work
    change the name back and you will be fine until the next problem you hit that is caused by choosing a referenced library
    Have a nice day
    LN

  • Changing Oracle Report Output Format at runtime

    Dear All,
    I've custom Oracle Report in Oracle Apps., and would like to give the users an option to select the output format (XML, TEXT, PDF, etc.) whilst submitting the request.
    As a SYSADMIN, we can modify the Output Format value of the concurrent program(Oracle Report in this case) to one we like.
    But I would like the user to select this output format option at runtime, rather then hard coding at SYSADMIN level. For that I've to create a Value Set with the desired report output format options, and attach this to the concurrent program.
    My question is, how we can make the desired output format to work at runtime?
    If any one can help?
    Thanks,
    Sandeep

    Hi Steve,
    I couldn't get it...???
    I'm running an Oracle Report in Oracle Apps. release 11.5.9
    The default output format of this report is TEXT, which is defined in its concurrent program.
    This report is submitted using standard request submission screen, and after successful completion we can view the output by pressing "View Output" button on "Requests" screen. This will open an another window and we can view the output page by page. Using "Tools>Copy File..." menu option, we can view the same output in IE window.
    Now, how does your resolution fits here and how can I view the same report in XML format?
    Many Thanks,
    Sandeep

  • Change Pick List Output Format with automated Output format  froTO creation

    hi.,
    When creating TO for delivery using VL06P or LT03 there is no opportunity to print the Company Custom  Format(X1) of the pick list.
    But if it is reprinted in LT31, Print Code X1(Company defined picking list Output format) can be selected. This is our custom formatted TO output format.
    The delivery address is on the document, so if X1 format is used with the automated output from TO creation, Warehouse personel will have the Hardcopy of the delivery address.
    Question: How can i have the Print Code X1 to default when i am creating delivery using VL06P or LT03.
    All help is much appreciated.
    Tx

    Resolved by Myself

  • Cells in Excel file output formatted to exponential format

    Hi ABAPers,
    I have generated an excel file using the FM, ' SO_NEW_DOCUMENT_ATT_SEND_API1 ' and cells in certain column are diplayed in the exponential format in excel. I had converted all the data to be populated into character type.
    As you may see, the Invoice Number ( vbeln CHAR 10 ) and the EAN Code ( ean11 CHAR 18 ) are in exponential format.
    But, as I expanded the cells, Invoice Number was displayed correctly but not EAN Code.
    Invoice Number - 5090002040
    EAN Code - 4011100191006
    Is it because EAN Code is only 13 Characters long when it was supposed to be 18?
    Please suggest any alternate logic for the EAN Code.
    Thanks.
    Arun G Nair

    Hello Alex,
    No spaces or apostrophes or inverted commas are to be added to the EAN Code ( 4011100191006 ).
    I have tried fetching the value and storing it into a string and then assigning that string to ean code variable but didn't work out. At the moment it is being stored in a variable of character datatype.
    As you may see, it works fine for Invoice Number, then why is it NOT working for EAN Code. They have the same character datatypes and are also asigned to variables of similar datatypes.

  • DIADEM file output format.

    Hi,
     Could you tell me if there is a way to add a introductory information, such as Title, Date and Location (see below) in exported csv files (separately from the data itself)?
     For example, I would like to create data format of:
    Title,
    Date,
    Location,
    Time, Speed, Temp, Vibration, ... etc
     Data,Data,Data,Data,..... 
    Kind regards
    HiroE

    H HiroE,
    I am attaching an example program that does this.  The standard "CSV" DataPlugin shipping with DIAdem exports tab delimited ASCII files with a *.csv extension.   If you really want the delimiter to be "," or ";" then you need to add the following parametrization:
    FilePath = "C:\Test Commas.csv"Delimiter = "," ' vbTABFileParameters = FileParameters & "<filename>" & FilePath & "</filename>"FileParameters = FileParameters & "<delimiter>" & Delimiter & "</delimiter>"Call DataFileSaveSel(FileParameters, "CSV", SelChStr) 
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments
    Attachments:
    ASCII Export with CSV Headers.zip ‏127 KB

  • Rename file name & format using ftp sender

    Hi all,
    This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
    At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
    client format is  :  SAP_Order.txt (Pervious file name).
    We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
    How can i achieve this requirement?
    Can please suggests me solutions ASAP.
    Best Regards,
    satya,

    Hi,
       if your requirement is to pick the  existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
    then its simple...
    use two receivers instead of one , one for point to target and other for sender itself... (second receiver  is for  changing  the file name format....)
    Hope the above understanding is correct...if not provide more details of your requirement...
    HTH
    Rajesh

  • Aperture: After changed the file name in Finder Aperture can't load the referenced file anymore

    After I've changed the file name/format in Finder Aperture can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.

    As you told, the command "Locate Referenced File" doesn't work, if the filename doen't match exactly. And the filenames should keep their new names.
    "Locate Referenced File" will be able to reconnect one file at a time, if you direct Aperture to the matching file in the Loate Referenced File dialog, but it will not be able to recognise the other matching referenced files and to reconnect them all at once with the "Reconnect All" button.
    It will be a lot of work to reconnect the one by one.  Usually it is much easier to rename the original master files using Metadata > Batch change in Aperture than to try to do that in the Finder.

  • Oracle eBS- PO Output Format field - question

    Hi,
    If I'm using this path
    1.Log in to the Purchasing Super User responsibility.
    2. Navigate to the Purchasing Options window. (Navigation: Set Up > Organization > Purchasing Options)
    3. Navigate to the Control tab.
    4. and then I choose PO Output Format field
    The problem is I can't change this (PO Output Format field) from TEXT to PDF. Does anybody knows why?
    Regards,
    Marius

    See Note: 301824.1.
    XML Publisher has not been installed on the server.

  • Changing the file format of spool output when scheduling a background job.

    Hello Experts,
    I have an issue. It is related to Spool output format. I created a job for one report program for which the output is a list output. I have added one recipient in the 'Spool list recipient' while creating the job SM36. After the job is finished the spool output is sent to the recipient mail id as .htm format as an attachment. But the attachment should be excel sheet or text file. No coding in the program should be used to convert the file format. Only settings in the spool while creating job should be manipulated. Please help me in solving this issue.
    Regards.

    Hi Sunil,
    You can use the logic for converting spool to PDF using program : RSTXPDFT4 . Alternatively you can use FM: CONVERT_ABAPSPOOLJOB_2_PDF . In this FM you need to pass the Spool id .
    u can make use of these FM's SO_DOCUMENT_SEND_API1
    SO_NEW_DOCUMENT_SEND_API1
    Check out the following wiki:
    https://wiki.sdn.sap.com/wiki/display/Snippets/ConvertsspoolrequestintoPDFdocumentand+emails
    hope this will use full to you.
    Thanks!!

  • Tutorials in SWF output format prompted "Do you trust this content to connect to the Internet?" when opening another SWF file

    Please help.
    I have a tutorial with in the output format of SWF and HTM. I have click boxes that On Success will open another tutorial (SWF file). When I click on the click box, I get prompted “Do you trust this content to connect to the Internet?” by the Adobe Flash Player. I can click “Yes” and continue, however I don’t want the user to get prompted for every click box with this action (there is one for every tutorial and navigation buttons to each tutorial). I also think that SCORM can't handle the prompt, because when I run the tutorial from the LMS the click boxes do not work at all.
    I have tried selecting “Always allow” in the Global Security Settings panel as per the instruction on this website: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l.
    Any ideas?

    Hi,
    I wanted to add on a question to this posting.... I believe Rod's instructions must be followed on a per-PC basis, correct? Is there any way to disable this globally when/after I publish the files rather than telling 1000 users across the globe that they have to change their security settings? I don't think so from the article (very thorough) but just hoping there's something I can do?!
    Thank you!
    Michele

  • Change wget output format?

    So I've finally switched my pacman configuration to use wget to download packages instead of the default downloader, and it's a lot faster, I'm glad I switched. The only thing that bugs me just a little is the bulky and unnecessary output format of wget. Is there a way I could reconfigure the format to the minimums? For example, just the name of the file, progress bar, time downloading, and speed? I've looked at all the configuration files for wget, and there doesn't seem to be any options to change the format of the output in any way. Any ideas?
    All help appreciated
    Danny
    Last edited by Dannny (2011-03-29 00:16:31)

    Does adding -q to the pacman command do what you want?

  • Changing output format for iTunes conversions

    WHen I convert my WMA files, iTunes converts them as quicktime files. When I play music through my laptop I prefer to us Windows Media Player though, not quicktime.
    Does anyone know if I can change the output format in iTunes to change them from WMA to MP3 instead of quicktime?
    thankyou

    When you import a wma file into iTunes, it makes a copy of the file converting it to either MP3 or AAC according to how you have set your preferences in Edit>>Preferences>>Advanced>>Importing.
    You want the drop down box labelled "Import Using".
    The actual program used to play the file depends on how you have your file associations set. You can change this by right clicking on a file and selecting "Open with" >>Choose Program. You select the program you want to use (assuming it knows how to play the file) and also ensure the "Always use selected program..." check box is ticked.
    The original wma file is left intact, so unless you delete it, it will be available to use in WMP. If you don't want to do that, and you want to use WMP as your player, you need to import into iTunes as MP3 rather than AAC.

  • CHANGING OUTPUT FORMAT

    does anyone know how to change the output format so that when you export to itunes it is already an mp3 and not an AIF?

    GarageBand only exports as a .aiff file, sorry

  • How to change the output format (procedure) in the "norma 19" (CSB19)

    A bank asks us that the file that currently we send to them with the data of the domicile of our busines partners (customers ISU) must have a different output format from that is currently sending, specifically ask us to change the procedure 1 to the 2 of the "norma 19" (CSB 19) --> (Data Medium Exchange)
    I appreciate if someone can shed me some light on the subject ...
    Where can I customize the "norma 19"?
    How to change to the procedure 2?
    thank you very much in advance.

    Can someone help please. 1. Write a class that connects to the database, runs the proc, extracts the data and puts it in an ArrayList. This class does NOT have any gui code (none, zero.)
    2. Test that class
    3. Write GUI code that uses that class.
    Questions about 1 and 2 are posted to this forum. Questions about 3 are posted to a forum that deals with GUIS - not this one.

Maybe you are looking for