Changing Network Locations under a restricted/managed account.

I am an IT administrator at a company that now has OS X Leopard laptops that are being used both on our network and outside our network. The user has a restricted account but does not have Parental Controls enabled. The restricted user account can not change locations with out supplying an administrator password. Is there a way for a restricted user to change their Network Location (it works in Tiger)?

The account is not an administrator account. Therefore they do not have write access outside their home directory. The effect of that is they can not install applications and can not change some preferences.
+..."In 10.5, as in earlier versions of OS X, switching between pre-configured network "Locations" via the "Apple Menu" should not require authentication"...+
I have not looked into changing Locations via the Apple Menu, only through the Network menu in System Preferences. I'll give that a try tomorrow morning and get back with you.

Similar Messages

Server 2012 R2 - Change network location from public to private

I am having an issue with changing Network location to private from Public on Server 2012 R2 X64 .
Please note all the reference for previous servers for fixing this issue does not work on 2012 R2.
I am using Static-IP and "Workgroup" as domain setting.
In 2012 server by Right clicking on Network and Turn sharing on or OFF worked but in 2012- R2 Right click is not working not providing turn sharing ON or OFF option.

Check if you can change from here :
Run -- Gpedit.msc-- Open Computer configration -->Windows Settings -->Security Settings -->select Network list manager policies
Arnav Sharma |
Facebook | Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other
community members reading the thread.
NO it did not work I had already tired and rebooted it does not work. Just for other having the same issue please note my Build is 9600 so this may not apply to you,if you have a different Build you might not have this problem.
I am going back to server2012 rather using R2.

How do you change network location type on Server 2012?

Within Network & Sharing Center there appears to be no options available to change a network type as you could do in Server 2012?
Within Network List Manager policies everything is set to "not configured" so this should not be disabling any functionality.
Thanks.

Hi,
Firstly, if the server is domain joined, when it starts to detect the network location, the machine will contact a DC via port 389. If this detection successful, it will get the domain profile. And we cannot change it.
However, if the server is not domain joined, the domain was not found or process failed, NLA will let you to determine which firewall profile will be used, private or public.
We can do this by referring to
Turn sharing on or off or
How to change network location type in Windows 8.
Also we can refer to
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles.
All the above articles can apply to Windows Server 2012.
Hope this helps.
Jeremy Wu
TechNet Community Support

Change network location on a domain controller

This thing is driving me crazy. I have a virtual server with Windows Server 2012 R2. It has one NIC, which gets the internet address through the hosting company's dhcp. It is a public IP address. I've installed the Microsoft Virtual Network Adapter, which
has a Static IP of 10.0.0.1. The server was upgraded to be a domain controller.
Now the problem: it detects both networks as domain joined and puts them under the same domain profile of the firewall, although it should put NIC1 another the public profile, and NIC2 (the virtual one) under domain.
I've tried every possible thing I could think of. Going through GPO's to change network location, then blocked everything on port 389 on the firewall, so he cannot find himself put the NIC under the domain (I actually tried blocking every outgoing and incoming
connection on the firewall, it does not work), I even tried changing the registry. Nothing helps. It still puts the two cards under domain profile.
Any ideas?

Hi,
Multi-homing a DC is not recommended.
http://blogs.dirteam.com/blogs/acefekay/archive/2009/08/03/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters.aspx
There is a similar thread:
Change network location on Domain Controller
http://social.technet.microsoft.com/Forums/en-US/ba92eede-e0a4-4fa0-8b4f-f386a45558e0/change-network-location-on-domain-controller?forum=winserverDS
Regards.
Vivian Wang

IPad sync hangs after changing Network Locations

I have a problem where often after I change Network Locations, the next iPad sync will hang in Step 1 of 5 with the progress right under the "e" of Step.
I have let it sit there for hours and it never progresses. I try to eject the iPad, it will never eject it.
I have sort of a formula to recover from this.
* I have to just disconnect the USB cable from the Mac.
* I shut down iTunes.
* I reboot the computer.
* I try to power off the iPad by holding down both buttons.
* It will hang for ever with the little spinning thing going in the middle of the screen.
* I will hold down the both buttons again and it will finally power off the iPad.
* I boot the iPad again.
* I bring up iTunes on the Mac and connect the USB cable and let it try to sync.
* This will fail the first time on Step 5 of 5 with the message "iTunes could not back up the iPad "My's iPad" because an error occurred. OK.
* I click OK.
* I eject the iPad.
* I shutdown iTunes and bring it back up.
* I plug the iPad back in to the MacBook Pro.
Now the iPad will sync and continue to sync normally unless I change my network "Location". Once I change my Network Location there is some probability that iTunes and the iPad will get into this stuck condition.
I've looked at the main console logs and All Messages. I don't see anything obvious.
Is anyone else seeing this behavior?
Does anyone have some hints about how to debug this?
-- Ed

Hi,
Tap Settings / General / Reset / Reset Network Settings.
See if that helps...
Carolyn

Textedit and preview crashing in osx lion when changing network location

I did upgrade to lion on launch and noticed that textedit and preview work quite well except when changing network location: after a few seconds of spinning ball, both crash.
Tried repairing permissions, deleting "containers" folders in my library and so on, without luck.
Anyone is experiencing the same problem?
This is an excerpt of the crash log:
Process:         TextEdit [663]
Path:            /Applications/TextEdit.app/Contents/MacOS/TextEdit
Identifier:      TextEdit
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process: TextEdit [656]
Date/Time:       2011-08-18 01:14:19.349 +0200
OS Version:      Mac OS X 10.7.1 (11B26)
Report Version: 9
Interval Since Last Report:          7146 sec
Crashes Since Last Report:           17
Per-App Crashes Since Last Report:   15
Anonymous UUID:                      5E6B69BE-D41B-45F4-BA5B-1DD8298A76AA
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000001c0a529a0
VM Regions Near 0x1c0a529a0:
    MALLOC metadata        0000000108342000-0000000108343000 [    4K] rw-/rwx SM=PRV
-->
    MALLOC_TINY            00007fc808c00000-00007fc808f00000 [ 3072K] rw-/rwx SM=COW
Application Specific Information:
objc[656]: garbage collection is OFF
*** multi-threaded process forked ***

UPDATE 2: I'm having this issue both on my iMac and my Macbook, so I suppose it's a lion bug and not simply something related to something that went wrong during the update (permissions or something like this). It's both in 10.7 and 10.7.1.
I'm going to try on my wife's Macbook to see if it's something related to some software or setting I'm using; in the meanwhile, can someone out there try to reproduce this issue? Just open textedit and change the network location from the menu bar (you should create one other than "automatic" for "locations" to show up just below "dock"): at this point you should get the spinning ball and then a window telling you that textedit just crashed. Try to do a couple of times if it doesn't crash the first one.
BTW I noticed that textedit doesn't crash if you have the network preference pane open and active ("system preferences" showed on the menu bar) and change the location from the menu bar.
I think I'm going to give a call to Applecare to see if there's some plan to get this corrected in some next update.

Help with script to eject an external drive and change Network Location?

Hello,
Could someone help me with a script that would do the following:
-eject an external hard drive call "1TB_BU"
-change the Network System Preferences Location from "Work" to "Home"
I then need another that would change the Location from "Home" to "Work"
THx!
~Von

1. Use the following:
tell application "Finder"
eject disk "1TB_BU"
end tell
2. Click here for information.
(35975)

Changing Network Location

I want to create an AppleScript that changes my network location based on the network name detected by Airport.
Currently I have to open:
System > Network > Location
And select the Location I'm at (ie. Work or Home). I'm trying to automate this change as follows:
If Airport detects a network named "Work", automatically change my location to "Work".
If Airport detects a network named "Home", automatically change my location to "Home".
Any ideas?
PowerBook G4 Mac OS X (10.4.7)

Take a look at this script described over on the MacOSXhints forum:
http://www.macosxhints.com/article.php?story=20060801081741437
TiBook 1GHz; Dual G4 Mac OS X (10.4.6)

Crashing changing network locations

I get a system crash every time I change my Network Location. Is this a known problem? I am forced to pull the plug to reboot. This only seems to happen if the computer has slept. Until then the Locations prefpanel works fine.

Repair permissions on your disk from the Mac OS X install disk.

Freeze when I change Network locations

Every time I use the "Apple" menu to switch network locations, my Mac freezes. The only way to get it running is to pull the plug. is this normal?
Is there some way to remove this item from the list so I am not forced to reboot and lose all my work?
When I boot it back up, about 10 windows open that should have been closed days ago. Is this normal?

Hi all, I had the same problem and I experimented a little bit around it. I came up with the following observations.
1) If the MBP is connected to airport and airport IS responding, no matter how many times you put it to sleep it will never freeze coming back to the network --> it's not just sleeping
2) If it is on airport when put it to sleep and it wakes up in a different environment (i.e. LAN via ethernet) it freezes, but
3) when you restart it after 2) it restarts with the old airport settings, and if now you switch onto LAN ethernet it won't freeze -->it's not just switching
4) if it is on airport and you switch onto ethernet while STILL being in the airport covered area it won't freeze either, even if the ethernet connection is not available --> it is the combination of loosing the connection while sleeping
5) if it is on ethernet, and it wakes up after sleeping, into a new area with airport but without ethernet it never freezes --> it is unidirectional, i.e. airport to ethernet while sleeping = freeze ethernet to airport = no freeze, irrespective of having been asleep
(My) conclusion: there is some bug when it tries to put down a previously active network connection via airport when airport is not responding anymore
(my) solution: switch onto ethernet before you put it into sleep and before leaving the airport covered area, and it won't freeze any longer.
Hope this helps....
Ciao
Adriano

Restricting managed accounts on Mac OS X Lion

Hello, I need to enforce many restrictions (for instance, managed user can't change wallpaper nor screensaver)
on 10 Mac Os X Lion machines, similarly to what you can do using "gpedit" locally on Windows (when your
PC's are not joined to a domain).
Do I have to get a Mac Os X Lion Server and set up directory services and authentication to do this?
Thanks, bye App200

you may also try just creating an account with parental controls on all of your systems. But using the server would make it easier to maintain. In that case you would have to setup the directory services and a managed group for the users with the restrictions.

Apple deducted Rs.60 for changing Country location for iTunes & App Store Accounts

Dear Apple product representative,
I would really appreciate if you could stop being thief and stop deduction money from my account.
Just tried to Change location on my app store, which was showing NewZeland instead of India and I was not been able to update in apps due to this.
As per instrustions:
Instructions
1
Tap "Settings" from the main menu of your iOS device.
2
Tap "Store."
3
Tap "View Apple ID."
4
Enter your user name and password.
5
Tap the space underneath "Change Country or Region."
6
Select the region where you will be located.
7
Tap "Done."
To my show there was a Rs60 Deduction.
Request you to kindly revert this transaction else I need to knock the doors of consumer court. This is rediculeous. I need my money back.
Suneer

Hi Sockatume,
Few days back I wanted to download BBM for iPhone to which I was diverted to New Zealand App Store automatically.
So whenever I tried to download apps from the AppStore it said, I wasn't in the region which I should be that is India and being in different region I can't download any app.
So I followed the instructions as above. After updating the region and the proceeding pages of the instruction. There was a deduction of money.
I didn't buy any gift card or anything neither I went to that page.
Suneer

Problem about allow Managed User change Network setting.

I'm IT Support of school. We have over 200 MacBook with 10.4 and 10.5 OS.
Each student can loan MacBook from our school back to home use.
We have two local accounts on both 10.4 and 10.5.
One is admin user for IT Support use.
Another one is "Managed" student account with Parental Control.
The problem is we setup all MacBook connect with our school wireless but most student in home maybe have different broadband network setting....something maybe wireless, PPPoE, DHCP......etc.
We tested even in 10.4 or 10.5 "Managed" accounts also cannot change Network settting or "Locations Profile"....
Any idea can help me solve this problem?
Thanks....

As the administrator you can set up multiple locations. Managed users can change their location under the Apple menu -> Location. An admin password is not needed to change the location. Is this not working for you?

Network location and apple script

Hi,
I have a strange problem... When I try to use this AppleScript to change network location in Leopard, nothing happens:
tell application "System Events"
tell network preferences
get properties
--> returns: {current location:location id "51BD3FB7-50D1-4859-9649-9138E7FF1ECA" of network preferences, class:network preferences object}
get the name of every location
--> returns: {"Automatic", "Sprint Card"}
set current location to location "Automatic"
end tell
end tell
This is copy-pasted from <http://www.apple.com/applescript/features/system-prefs.html>. I have 3 locations set: home, office and Automatic. I'm currently using home, and this script just silently fails to set the location to Automatic... Any thoughts/hints?

That works, thanks!
I'm still wondering why "pure" AppleScript solution proposed by Apple is not working?

What is a Network Location?

I just recently set up homegroup to connect my desktop & Laptop together and it works flawless. However i've noticed there is now a 'network location' under 'This PC' on both my laptop and my desktop.
I'm not 100% sure what this is for and how it got there. If it was automatically installed when i set up my homegroup. But it isnt very useful since i can just use homegroup to access files between each device.
Can anyone give more information on what this does and if i can remove the network location device with out it interferring with my homegroup set up.
Thanks

Hi,
The first time that you connect to a network, you must choose a network location. This automatically sets the appropriate firewall and security settings for the type of network that you connect to. If you connect to networks in different locations (for example,
a network at your home, at a local coffee shop, or at work), choosing a network location can help ensure that your computer is always set to an appropriate security level.
Computers on a private network can belong to a homegroup.
The Public network location is designed to keep your computer from being visible to other computers around you and to help protect your computer from any malicious software from the Internet.
HomeGroup is not available on public networks, and network discovery is turned off.
Kate Li
TechNet Community Support

Changing Network Locations under a restricted/managed account.

Similar Messages

Maybe you are looking for