Changing number range so that LIV and AP documnet numbers are same

Hi Experts,
Our client wants that LIV and AP document number should be same. As documents are already being created in production environment.
Please advise :
If it is ok to change number range at this stage as LIV and AP documents are already created in production environment.
If yes then what are the things i should take care off before changing the number ranges.
Regards,
Kamal

Not advisable to change the document number range at this stage, bcz there are some document which has already been posted in production environment.
LIV # is generated by MM (when you post the invoice) which automatically generates AP document (as follow on doc) internally.
AP always trace the AP document # and not LIV.
For more details please read the nodes in SPRO
MM>LIV>incoming invoice>Number assignment
You need to be very cautious before doing this.

Similar Messages

Number range of billing doc and accounting doc to be same

Hi Gurus,
Can any one help me out to make the number ranges of billing doc and accounting doc same every time.
Even though the invoice is cancelled the same no range should come for cancellation accounting doc.
Thanks in advance
Dushyant

Hi,
Create or change the same interval for the BILLING DOCUMENTS & ACCOUNTING DOCUMENTS in VN01 and FBN1*
For BILLING DOCUMENTS assign this Number range in the VOFA transaction code for the Billing document tyes*
For ACCOUNTING DOCUMENTS assign this Number range in the FBN1 for your company code and fiscal year*
activate the External Field [] . this is mandtry
please check and revert back.
regards,
Anup Shukla

Impact of changing number ranges for FI & MM for MM Invoice documents

Hello Friends,
Client is asking to have both MM invoice document number and FI document number to be same, what will the impact of this change since we have done many transactions already in production.
Kindly suggest the best time and way of doing his.
Thanks in Advance.
Regards
Ravi

We can align both the FI and MM document number ranges in sync
SAP gives you customizing options to make both document numbers the same. The solution lies in the number range assignment of the MM and FI document. You need to configure the MM document number assignment as internal and external for the FI documents. (FI documents are set up with external-assigned numbering, while the MM document has internal, or system-generated, numbering.) In this case, the MM document number is passed on to the FI document, which means that the number of the FI document is identical to the MM document. .
Because the document number assignment in MM is not company code-specific, in contrast to the FI document, you need to take the following points into consideration before using external document number assignments for FI documents. They have the following effects on your system:
u2022     Continuous number assignments for FI documents are not guaranteed, especially if you have more than one company code.
u2022     The document number ranges in MM and FI have to be the same for all company codes.
u2022     In Release 4.6C, you need to use internal number assignments for revaluation documents, invoice reduction documents, Evaluated Receipt Settlement (ERS) postings, or reversal documents. There are no restrictions as of SAP Enterprise 4.70.
u2022     Use a different number range assignment for FI invoice posting (FB60), because FI invoice postings usually use internal number range assignments and the postings originate in FI, not MM.
u2022     If you use document parking and the number range intervals are fiscal year-dependent, you cannot change the posting date of the document if the fiscal year is different to that determined for the previous posting date. In this case you have to delete the document and re-enter it. There are no restrictions for fiscal year-independent number ranges.
please find below the confiuration steps
OMR4 - CREATE NUMBER RANSGES SAY 52 (EXTERNAL)
AND ASSIGN THE NUMBER RANGES TO DOCUMENT TYPE RE.
OMRJ MAINTAIN MM NUMBER RANGES SAY 52 (INTERNAL)
AND ASSIGN THE SAME FOR DOCUMENT TYPE RD.
Regards
P RAMASUBRAMANIAN

Document number ranges in entry view and in General Ledger view

What is the difference between Document number ranges in entry view and in General Ledger view ?
We have new GL activated in our system , and found that the GL Document types ( SA) are assigned to document number ranges in entry view . What is the need to define document number ranges in General Ledger view ?

Hi,
Document Number Range in entry view is the document numbers which are posting in your leading ledger. You cant achieve the same document number range to the general ledger view. A General ledger view can have both Leading ledger view and non leading ledger view therefore document number range should not be kept same for both ledgers as your running document number gets skipped.
That to some times you can only post documents to only Non Leading ledgers. Therefore a separate number ranges needs to be created for general ledger view
Hope u understood.
regards
srikanth
Edited by: boddupalli srikanth on May 21, 2009 9:28 PM

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.

Contact Adobe support:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

"" No authorization for number range object type GTIN and activity SHOW ""

While creating number range in number range administration for GTIN system showing the error
"" No authorization for number range object type GTIN and activity SHOW ""
Pls help me to solve this issue

Hi ,
Please check roles for user assigend as [ This is for super administrator ]
SAP_AIN_ADMINISTRATOR
SAP_AIN_OER_ADMINISTRATOR
SAP_AIN_SUPER_ADMINISTRATOR
SAP_AIN_SUPERVISOR
SAP_AIN_WORKER
and profiles assgined as
SAP_ALL
SAP_NEW
Hope it will helps
Thanks .,
V.Rangarajan

No authorization for number range object type BTI and activity SHOW

Hi All,
When I try to execute
SAP Easy Access screen - > Auto-ID Infrastructure -> Master data -> Number Ranges -> Number Range Administration
on the next web window when I select the object type BTI , it comes up with the error
Number range table not maintained for object BTI in customizing
No authorization for number range object type BTI and activity SHOW
I am using AIN 5.1 . Is this an authorization issue ?. If so which all roles I should give to the user? IF you have any idea about this please share some tips.

Hi Sahad,
Only few number range object types are available in the standard system:
Follow the link for help .
http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm
Follow the for setting up the others.
http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm

I'm getting messages that Netflix and the iTunes store are currently unavailable. This can't be a coincidence. also, my iTunes account works fine on my Mac, just not on the Apple TV.

I'm getting messages on Apple TV that netflix and the itunes store are currently unavailable. This can't be a coincidence. Also, the iTunes store is working fine on my Mac, the message is only on the apple TV. Does anyone come across this frequently?

1. An explanation for what? There is indeed a support number (which you can find on this page in "Contact Us" and you are limited to one support call in the first 90 days and if you have the AppleCare you have more than that available, so I'm not sure what you are whinning about (and it is whinning, trust me).
2. http://www.kelleytown.com/ikelleytown.htm#firewire
However, since I wrote that I've also found this link pretty well explaining why firewire is the only way to go as well (it's about video but the same principles apply to the iPod:
http://www.pcworld.idg.com.au/index.php/id;1847886895
3. Your computer is constantly changing whether you know it or not. Do you not apply any MS upgrades (or have them automatically applied for you?) Do you not have any antivirus on your machine (which applies its own upgrades)? Do you not, ever, ever, ever, open any email message, or download that cute little movie your friend sent you, or plug in any other device (like a digital camera or flashcard reader) or any of the other hundreds of things that change the computer environment.
It would be tempting to conclude a priori that the update you applied is now the problem, but if so, how do you explain the millions of others who apply the update without issues? The difference is in the software and settings on the witches brew that is a PC. So in a sense you are right in that the old firmware worked with the mess that is your computer and now the new one doesn't -- but it ain't up to Apple to fix your computer, and impossible for them to control the environment (oh, I guess unless you buy a Mac -- "coincidentally" Mac's use firewire for the iPod :>)
I dunno -- when 90% of all issues (100% of all connection issues) can be solved with the Adaptec 4300 I tend to have a lot less patience with folks. If you want to use the mess that is USB then you'll just have to deal with the fact that MS screwed it up big time and become more knowledgable on how to handle the problems.

Stupid question,, when installing acrobat, they ask for serial number,, i wrote that without the dashes between numbers,, do I need to have dashes between sets of 4 numbers ?

stupid question,, when installing acrobat, they ask for serial number,, i wrote that without the dashes between numbers,, do I need to have dashes between sets of 4 numbers ?

Yes Example:-
1234-5678-1234-5678-1234-5678

Tariff #, Commodity #, HTS # and Schedule B # all are same.

My understanding is Tariff #, Commodity #, HTS # and Schedule B # all are same. Meaning, you apply and assign same 10 digit numbering scheme for the given parts. When you import you call it HTS# or Tariff #. When you export the part # it is called Commodity # or
Schedule B #.
Please correct my understanding.
thanks
siva

Hi Siva,
The Harmonized System (HS) u2013 HS Codes
The World Customs Organization (WCO) developed the Harmonized Commodity Description and Coding System, to describe products for customs purposes. HS codes are descriptions of products specific to 2, 4, 6, 8, or 10 digit levels. The Harmonized System is recognized in 179 countries, and trade based on its classifications represents 98 percent of world trade.
Schedule B Commodity Codes u2013 Schedule B numbers
Schedule B commodity codes are 10-digit numeric codes used to identify products that are exported from the U.S. to other countries. They are similar to 10-digit Harmonized Tariff System (HTS) codes (the import codes) in that the groups are the same up to the 6-digit level.
For more information on HS codes and Schedule B code listings please refer to the following resources.
This Export America Article on Product Classification article helps to answer basic questions about HS codes and classification. It also provides resources for further assistance and links to U.S. tariff schedules.
http://www.ita.doc.gov/exportamerica/Volume 2/April 2001/ta_asktic.htm
U.S. International Trade Commission u2013 HS Codes Information offers information about HS codes and tariff rate information.
http://www.usitc.gov/tata/index.htm
The U.S. Census Bureau Foreign Trade Statistics is a U.S. government search engine of U.S. Schedule B classification codes.
http://www.census.gov/foreign-trade/schedules/b/index.html
Tariff and Tax information
http://www.export.gov/logistics/country_tariff_info.asp
Thanks,
Prarit

How to change number range in solution manager

Hi all,
Recently we had upgrade of ST patch, after that our support message sequence got changed and now support messages are getting created starting from 1. We want to change the sequence(number range).
how/where can i change the sequence of the support messages(number ranges).
Thanks & Regards
Nick Loy

Hi Prakar,
Thanks but as you told above, i am not able to change the number range 01 to 02 in SNRO.
System is not allowing me to chagne the existing one.
now my system has the details as below:in SNRO>>>>CRM_SERVIC>>>>
01 0000000001 0000999999 780
02 9999000000 9999999999 0 External
I want to change the message sequence starting from 9999000001 which is in extenal number range.
And one more thing, where can i find the number range which is being used for particular transaction?
can you help me how to change?
Thanks & regards
Nick Loy

Vendor Number Range Conflict SAP ECC and CRM 2007

I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts). What is the best approach to dealing with this issue...
My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
eg SAP Vendor "50000001" equates to CRM "VEN50000001"
Is such as approach supported? Can you point me to the documentation that shows how such an approach could be implemented. What approaches have others done to address similar issues?
Thanks in advance
Eddie
By the way we are on CRM 2007 sp4

Hi Eddie,
SAP Note 1044637 - Customize Vendor Numbers
Implement the code present in the attachment. You can
change it according to your own requirements. The example code
suffixes 'VEND' before the first six digits of the vendor
number before it is downloaded to CRM.
Thanks,
Vaibhav Shah

Change Number Range of Material Document

Hi Guru,
We have a requirement to change material document number range that depend on movement type.
I have check in SPRO and read some document for material document number range.
I understand that this is a standard SAP.
- GR from PO or Order         Number Rage will be 5000000000 to 5099999999 and Fiscal Year
- GR Other, GI, Transfer      Number Rage will be 4900000000 to 4900000000 and Fiscal Year
My question is Can we change this number range?
I guess that we have to implement BADI or User-Exit to determine new number rage but I don't know how to do this.
Please kindly advice or guide me.
Thank you very much.
Saiyaman

Hi,
Insted of Movemen ttype you can asign seperate number range to a transaction code follow the process as below
   First u need to create seperate document type in OMR4 or OBF4,   then create a new number range in OMBT assign your new number range to new created document type then in T. code OMBA assign new created document type to the transaction code so whenever u will create document with this Transaction code u can get new number range.
regards,
zafar

How to change Number range to Contact Person in Customer Master Record

Dear all,
We are maintaining contact person details under contact person tab in customer master record.
Currently contact person is being created using VAP1 transaction.
Can we automate this contact person creation by entering the data in contact person itself?
and where can we change the number range of contact person.
I have searched a lot to find the solution for this. Please help me to resolve this issue. Your suggestions will be highly appreciated.
Best regards
Venkat

Hi Venkat,
To your first question: "Can we automate this contact person creation by entering the data in contact person itself?"
Yes, you can enter the contact person directly in the customer master in the contact person tab. A number is generated automatically.
To your second question, go to transaction SNUM, and there use object "PARTNER". Here you can configure number range for contact persons.
Hope this helps,
Regards
Nikhilesh

How to change number range for document type ?

Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1)     Define ledger for accounting.
2)     Defining currencies for it.
3)     Defining ledger group for the same.
4)     Defining accounting principles
5)     Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.

hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha

Changing number range so that LIV and AP documnet numbers are same

Similar Messages

Maybe you are looking for