Changing numerical values in any object not working correctly

I'm trying to create new parts and I want to adjust things like hole diameter, body length, offset height.
When I go to change the numerical values......I highlight the numbers and start typing my new value and it just adds random numbers to the fields....
The only way I can change the number is to click and highlight the digit and type the single number I want.
So if 24.00000 is in the field and I want 1456.342455 I have to click on each digit of the 24.00000 and alter it ONE DIGIT AT A TIME to get my 1456!!!!!!!!!!!!
This happens for board wizard, component wizard......anything that requires the changing of the numberical value is completely messed up.
What is going on here......all the basic functionality seems to be completely screwed up........I can't get anything done with all this bug chasing and interference.
It becoming more than an annoyance.Message Edited by kittmaster on 08-03-2007 10:13 PM
Signature: Looking for a footprint, component, model? Might be here > http://ni.kittmaster.com

Chris,
Yes... in multiple numeric fields (especially the ones that are applying changes in the background while you type) typing the number becomes unefficient... I do know that R&D is working on this.
Currently (if it helps) you can select all the number, type the digits before the punctuation, then hit the "." mark, and then move the cursor to the precision digits. This is what I currently do.
Nestor
National Instruments

Similar Messages

  • Time change for daylight savings and Alarms not working correctly

    we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
    Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

    Read here:
    http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

  • Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working

    Problem : System Freezes frequently on any hardware scan or changes.
    Symptom : Wireless Keyboard Mouse not working.
    Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
    Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
    Soultion : Please follow steps below
    Step 1: Start > run > regedit
    Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
    Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
    Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
    Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
    This worked for me. Hope this works for you. Enjoy..!!

    Hi AshishSrivastava,
    Thank you for your sharing and update.
    Besides, I will change this thread type as discussion.
    Best regards
    Michael Shao
    TechNet Community Support

  • I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

    I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

    Download the yahoo email app, if you already deleted and reinstalled the email account and still have issue.
    This is a known issue with Yahoo email account.

  • Only posted values for Navigation does not work

    Hi,
    I have a problem where all master data is shown in the input help for a variable, even when the setting for the info object is to show only posted values.
    In a WEB template I have tree reports using tree different data providers. The setting in the web template is to show the same variable only once and that works. The setting of the info objects is to show only posted values. That does not work!
    When using the input help for a variable, all master data shows, not only the poster values in the data providers.
    When unchecking the setting Display Same Variable Only Once (MELT_VARBLES) the variables appears tree times each and the input help works as expected. It shows only posted values.
    Any experience of this?
    Best Regards
    Kent

    Hi Kent,
    If you build several queries on different infoproviders, then put them into one web template or workbook. Variables from different queries with the same technical name will get merged in variable screen (Set parameter MERGE_VARIABLES=True in web template property. Set "Display Duplicated Variables Only Once" in workbook settings for variables).
    This means, that it is not possible to decide which infoprovider the variable is based on. The provider is unknown to the system when doing F4 help so that D mode is not possible since D mode [Only Values in InfoProvider]  is also infoprovider dependent. So only M mode ['Values in Master Data Table'] is possible.
    In such merge variable situation, the authorizated values in F4 help is also retrieved without specific infoprovider.
    Regards,
    Nishant

  • Spry tab not working correctly after custom changes

    Hi,
    i have used Spry Widget for making tabs in Dreamweaver for one of my project. i have customize these tabs. every thing was working fine until i add the horizontal scrolling to tab by jquery. tabs are not working correctly they do not show the tab content. i am sure there is some linking issue. all this problem begin when i added a addition div within the spry div tags if i remove <div style="overflow: hidden;" class="sc_menu" > every thing start working fine but this div control the scrolling and its important to put there. please can any one guide me what i am doing wrong i have uploaded the project to my server. below is the zip file link to download.
    http://khurram.visbl.com/test.zip
    please let me know if someone having problem in downloading above zip file. also waiting to find a solution for above. hope anyone is here who knows the solution 
    Best - Khurram

    Sorry to disappoint, the structure of the tabbed panels is
    <div id="TabbedPanels1" class="TabbedPanels">
      <ul class="TabbedPanelsTabGroup">
        <li class="TabbedPanelsTab" tabindex="0">Tab 1</li>
        <li class="TabbedPanelsTab" tabindex="0">Tab 2</li>
      </ul>
      <div class="TabbedPanelsContentGroup">
        <div class="TabbedPanelsContent">Content 1</div>
        <div class="TabbedPanelsContent">Content 2</div>
      </div>
    </div>
    As soon as you change that structure, this widget (out-of-the-box) will not work.
    Gramps

  • Why can I not import pictures any more? Lightroom says "Your Lightroom 5 64-bit does not work correctly"

    Why can I not import pictures any more?
    Lightroom says "Your Lightroom 5 64-bit does not work correctly"
    Technical informations:
    PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
    What I have done:
    I downloaded the newest LR 5.71 and installed it again - mode repair; without success
    I checked my PC with Norton 360: full scanning and optimizing registry
    I restarted the PC and than I installed the LR 5.7 again - repair
    Trouble 1:
    Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
    Trouble 2:
    I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
    Help:
    I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.

    Sehen Sie diesen Beitrag:
    Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
    Wacom Tablet-Treiber-Problem?

  • Quicktime objects not working on GoLive

    I have a GoLive CS2 Student Version. My Quicktime Objects are not working. I tried to drag the track objects to the page or to layer and no avail.
    Can you help me? I spent a whole day to finally figure out the Quicktime objects not working.

    Thank you for the support John,
    To explain what I am doing in more detail: I am basically making an image gallery with thumbnail buttons of each image. When the user enters this page I want to have the automatic slideshow of a few images. Then the user have the option to click on the buttons to see the images. I was able to make a slideshow in GoLive. But the transition is abrupt. According to the GoLive Help Menu there is a way to make the trasnition smoother using the timeline editor, but it is too difficult to follow up for me. So I downloaded another program called SWFn'Slide which was very easy to make the smooth transitional slideshow. Now I am trying to insert the SWF file into my page. But I can't figure out how to do it. In my understanding, I must place a layer on the page and on that layer I must place the SWF track from the Quicktime Objects tab. But I cannot drag any of the Quicktime Objects tools into the page. Again I am having a problem inserting a SWF file into the page.

  • Text keeps disappearing when I select it to make type at all / make changes / edit. Type tool is not working. I am running CS6 on a Macbook Pro Retina (which I am hating!) 10.9.4 - wish I'd never upgraded.

    Text keeps disappearing when I select it to make type at all / make changes / edit. Type tool is not working. I am running CS6 on a Macbook Pro Retina (which I am hating!) 10.9.4 - wish I'd never upgraded.
    Photoshop General Discussion

    The RAM needs specs as shown below.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • IPad is only works with changer , when I unplug it's not working

    My iPad 3 is only works with changer  when I unplug it's not working and not connecting to the PC even please some help?

    Hi,
    "But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
    If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
    The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
    of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
    Regards,
      Thorsten

  • My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

    My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  Any clues?

    I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  I only have a previous version re-install disc as I bought the latest OSX off the app store.  Any help gratefully received?

    Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • How can change numeric value to date format? example value 1070131(CYYMMDD)

    in the datatable can i change numeric value to date format . in database date value is like 1070131 (CYYMMDD). I want to see 31/01/07(DD/MM/YY) or 31 Jan 07 . Is it possible?
    Thanks,

    Did you solve your problem?

  • Hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me

    hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me

    Ask the carrier in the US who the phone is locked to if they will unlock it for you - put an unlock request into that carrier.
    Other than that and if they refuse to unlock it, then there is nothing you can do except buy a new phone.

  • Your apple ID has been disabled i have changed my password 6 times still not working

    your apple ID has been disabled i have changed my password 6 times still not working been trying to fix it for 3 hours now itunes is a joke

    Jim,
    This is what I posted on May 15th and it worked like a charm:
    Just got off the phone with Apple Support. I have been working on this same issue for 2 weeks now. I was told to go to www.apple.com/support/itunes. Then under "Get Customer Service" choose ITunes Store Account and Billing. Then choose "Managing your account" option. You will see an option where you can email, choose this. This brings up a form that you need to fill out and submit. Just tell them that you have reviewed your account (assuming you have) and you see no fraudulent activities. Then ask them to enable your account. You should have your account enabled within 24 hours.......at least that is what I was told. I just filled out the form and submitted it.

Maybe you are looking for