Changing object directory entry from $TEMP to a different package

I have saves SAPscript in $TEMP. How do I change it to a particular object directory ?
Thanks.
Regards,
Tushar.

Rajesh,
Go to SE80 -> Give Development class = $TMP
and you get all the objects under that class, select the desired object and right click on that one, you can see REASSIGN.. if you entered the desired development class then it will be reassigned.
Suresh

Similar Messages

Changing Object Directory Entry of Infocube - urgent

Hello -
I have an infocube that is already assigned to a package (not $TMP).
How can I reassign it to a different package.
When I try to reassign via Cube change, the package field is greyed out.
I have deleted all data, deactivated the cube + aggregates. There a re queries still attached to the cube though. But cannot change the Object Directory Entry.
Help solicited.
thanks.
-abhi

Abhi
In case of BW, there could be more than one package.
One for Backend development (like cube, ODS, update rules, info objects etc) and one or more for Reports.
So in ur case, the cube would always be alloted to the same package! You would only create new requests....
let me know if you have more questions.
prakash
Assigning points on SDN is way of saying thanks!!

Mass change in object directory entry

hi Experts ,
we have a problem in object directory entry of some near 1600 objects which want to change in a single go , can any one help us on this??
We have searched SDN already and do find similar questions but no relevant answer , please help.
If we try to change it through Se03 it asks to do it objectby object whch is a very time consuming activity .
Br,
Sunny.

In SE03,
You can give wild character if the object names starts with for example A* and then you can block select.
or if you go by further restriction(for example by package name), you can able to list all of the objects under the package.
This way you can block select it and change the object directory.

Object directory entries

When I am trying to change the package I am getting the following error message.
Object directory entry R3TR DTEL ZZADJ_PER locked
for request/task DEVK900251
How to change the object directory entries which are part of a request/task?
Please help.
Thanks,

As I told you before as long as you dont unlock those objects you can not change the package. Please unlock and then try to change the object directory entry. Create a new transport of copies and release the old transport. The released transport will not go anywhere. Dont forget to check the options on the unlock entries (expert tool).

Howto find according object via object directory entry?

Hi all,
I need to write a program that checks an ABAP source whether it is a local object ($TMP) or not. I know that I can search for the DEVCLASS in table TADIR. But in order to do so I first need to get the according object from the object directory entry of this ABAP source.
For example, I could check the function module "ZZZ_FUNCTION_MODULE", which is a function of the group "ZZZ_FGROUP". The according object directory entry is therefore "R3TR-FUGR-ZZZ_FGROUP". My qustion is: how can I map from "ZZZ_FUNCTION_MODULE" to "R3TR-FUGR-ZZZ_FGROUP"?
Thanks in advance for your help!
Kind regards; Matthias

The problem is that I do not necessarily know whether it is an function module or not.
For example, it could also be an include that I want to get the according object for...

Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist

Hi BW Experts,
I´m facing a Problem while releasing a Transport from Dev to Quality System. The consisty check shows the following objekt as not available:
Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist
A check for the Object: R3TR EVEN showed that it is a Event Collector which seems to be missing. The transport consists a process chain which listens to an event. Is this the mentioned Object or is it related to some different topic? The process chain is correct and activated.
Thanks in advance for your help.
Best regards
Christian

Hi Abdullah,
I followed your advice and did a check if the object was writen to my transport. The object was missing on the transport. But also searching in transport connection did not help.
So I had a look into the table TADIR and also here I could not find the mentioned object which was realy strange to me, as the process chain was active and correct.
I than deleted the event collector(AND) object in the process chain and created a new one. A check in the table TADIR now showed the before invisible EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 and also the new one created. The new EVEN Object(and also the old deleted one) was written to the transport. Importing it into Quality System worked without any problems.
I´m not 100% sure about this behaviour but maybe its linked to the fact that the process chain was a result from the Dataflow migration wizzard. Maybe while migrating that dataflow something went wrong.
Anyway, thanks to all of you for your help!
Best regards
Christian

Object Directory Entry

Hi folks,
I need to distinguish a function group and a function. My problem is that both have the same object directory entry.
I must know if there is another attribute to distinguish them. If yes where to find?
Thanks in advance.

Solved.
   IF wa-object = 'FUGR'.
      SELECT *
      FROM enlfdir
      INTO CORRESPONDING FIELDS OF TABLE t_enlfdir
      WHERE area = wa-obj_name
       AND generated <> 'X'.
      IF sy-subrc EQ 0.
        LOOP AT t_enlfdir INTO wa_enlfdir.
          wa-obj_name = wa_enlfdir-funcname.
          APPEND wa TO h_itab.
          help_counter = help_counter + 1.
        ENDLOOP.
      ENDIF.
    ENDIF.
    CLEAR wa.
    counter = counter + 1.
ENDLOOP.

Mass Object Directory Entry assignment

Hi gurus.
I got a bundle of InfoObjects with $TMP package assigned to.
Is there any possibility in BI to do mass Object Directory Entry assignment of <my BI package> instead of $TMP to InfoObjects?

hi Gediminas,
Go to tcode: SE80 it is called as Object Navigator, there you can create a package on your own, after creating the package all the objects will go into that package, after you create the package you will get a request number, and you have to give that request number when you do for mass objects entry.
regards,
raghu.

Object directory entry reverse lookup

Hi all,
Is there a quick way to trace an object directory entry (i.e. 46580GGOBLSFRS7P42HKLRFFF) back to an InfoObject or other object? I've got an error in a transport and I'm trying to trace back to see which specific object I have issues with. The transport log only refers to the object by its directory entry.
SU03 and SE80 have not given me this functionality (by trying so far). No luck using the transport organizer "manually" looking for the entry either.
Many thanks for any input!
Regards,
Petter
Message was edited by: M Petter

Hi Petter,
Try to search in DB table RSZELTXREF & RSZELTTXT.
Go to SE11/16 and type in the above table name and enter the element 46890... in the first field and hit execute.
If you cant find the any results in there, search in other lookup tables start with RSZ*.
Hope this helps.
Praveen
Message was edited by: Praveen Vujjini

Object Directory Entry Transport

Gurus
I have a small question.
When I collect a infobject in one request it goes into
Object Directory Entry R3TRIOBJZMATACNT.
Please explain what is this.
Many greetings gurus

George not sure if i understood well your question
but if your question is : is my infoobject collected in a transport request that i can send to qualification system or productive system then it is yes.
All infoobject that are collected in transport request are inserted as R3TR IOBJ --> name of the IO
hope this could help you
if not do not hesitate
regards
Boujema

How do you change the directory location from the hieachy window.

Our DAQ system consists of 285 vi's. During development changes, some vi's were created and passed to the DAQ via a LAN connection. Pulling up the vi's at the DAQ has changed the desired path such that some come from the LAN virtual drive, while others are resident on the DAQ PC. All have been copied to the PC's hard drive. Viewing the LabView hiearchy, how do I change the directory for a few individual vi's to point at only the PC harddrive? I saw this done once, but forgot how and cannot easy find it in the help files.

When this happens to me I temporarily disconnect the network drive or rename the network folder to force LabVIEW to do a search. If they're all in the same folder as the main VI, they'll be found automatically.

Object directory entry when trying to release TR

Dear experts
I have a problem when trying to release my TR in Development to Testing.It prompts me an error "Not all objects in the request could be locked. Do you want to release them anyway?"
Then I viewed the error and the error says:
"Object XXX requires a directory entry"
Do you have any idea how to go around this problem?
Thanking you in advance
Wan

Hi,
Check the Authorizations and Owner. What is the Message you are getting?.
Check
Re: Transport
Re: When releasing a transp. req.not all object in the request could be locked
Thanks
Reddy
Edited by: Surendra Reddy on Jun 23, 2010 9:10 AM

Create file object from xml file in different package

I have my java class which is in a package...edu.xx.proj
It contains the following
File f = new File("formats.xml");
My xml file is in the package edu.xx.proj.xml
How do I get the file object for my xml file?
Ultimately I want that once the jar is shipped .. The path of xml file shld be independent of my OS path... it can only lookup the package path..
I will really appreciate it if someone can throw some input as to how to resolve this issue..
Thank you

I have my java class which is in a
package...edu.xx.proj
It contains the following
File f = new File("formats.xml");
My xml file is in the package edu.xx.proj.xml
How do I get the file object for my xml file?
Ultimately I want that once the jar is shipped .. The
path of xml file shld be independent of my OS path...
it can only lookup the package path..
I will really appreciate it if someone can throw some
input as to how to resolve this issue..
Thank you
InputStream inputStream = getClass().getResourceAsStream("xml/formats.xml");
/* OR */
URL url = getClass().getResource("xml/formats.xml");hth

Mass change of object catalog entries

Hi All,
Here is an issue where I need your help:
I have a transport from another system with ~100 objects and I need to change their original systems.
I started it with "SE03 -> Change Object Directory Entries of Objects in a Request", but it takes too much time (double click -> change -> save) * 100...
Is there transaction where I can change these objects' original systems within one step?
Thanks,
Gabor

Hallo,
it's a long time since the original question, but since this has been posted in SDN so many times : how to mass change a package or original system in SE03 (SE03 / report RSWBO051/RSWBO052). The solution is to select the objects you want and enter MASS in the OK-code.
Regards
Jan

How to transfer a smartform from $temp package to my own package say "zpack" in abap?

hi, i am sanjeev.
earlier i used to save all the objects in local package only. whether it's a program or any class or any user created table.
but now i have created my own package and want to transfer all of those created objects into my package "zpack". even i transferred all the programs. but the smartforms i cant. so plz help me.
THanks in advance.

TC --> SE03
Select --> Change Object Directory Entries --> Click F8 or Click run button .
Check 'Check Box' and enter SSFO . Input field enter your Smart form name.
Under that we have block " Further Restriction" enter existing Package name ex: $TMP is this is saved under temporary folder.
and click on F8 or Run Button. Then we will get list of object's stored under this package .
Select required object and click on "Object Directory ", this will prompted pop asking to enter new package name.
This will help you to change from one package to your owned package.
Thanks,
Venu M B

Changing object directory entry from $TEMP to a different package

Similar Messages

Maybe you are looking for