Changing of "DateTime Original" Metadata by LR1.4

I edited a large number of my photos on a computer which had a misfuncioning clock. It would occasionally "forget" the real time and reset to October 2005. So a number of my photos when viewed in Bridge have "Modified" dates EARLIER than the "Original" dates. I know this part was "my bad", but the way Lightroom handled things was a bit strange and troubling.
On import (and conversion to DNG) the "DateTime Original" metadata was overwritten with the earliest date in the original file. Is there any way to get back the original, correct, metadata?

Similar Messages

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

Unable to change Date Created in Metadata

Please help with my first post...
Unable to change Date Created field in Metadata.
I am a newspaper photographer sending .jpg pics with captions to my office from my iMac. They are viewed at the office on Windows PCs using SCC MediaGrid.
When changing Date Created in Metadata Invalid Format warning appears "Format should be ISO 8601 XML compliant, that is YYYY-MM-DDThh:mm[:ss][tz] (eg 2006-07-11T13:14:30-07:00)"
If 2009-09-26, for example, is entered then exported pictures opened up in Photoshop or shown on SCC MediaGrid do not display the date.
To get dates to show up I first have to open a pic in Photoshop, go to File Info, enter 26/9/09 in Date Created and Save As.
Next I have to Import this into Aperture where the Date Created shows as "20090926".
Using Lift Metadata and Stamp Metadata the date can be transferred to other pics.
Now when I export these pics the date does show up in Photoshop and SCC MediaGrid.
Can Date Created be typed straight into field in Aperture?...Very important when pics go into archive on a server.
Also if I hit Return key in a Metadata Caption, to type on the next line, both lines will appear as one with a small square in-between them when viewed on SCC MediaGrid on a Windows PC.
Thanks in anticipation.

Nick I don't generallt use the IPTC metadata, so I'm not sure I will be too much help.
What version of Aperture are you using? I tried both things and I didn't have any problems with the latest version of Aperture on my Mac.
I was able to enter a date into "Date Created" both with and without the time-zone adjustment. Can you tell us the exact string you tried to enter into the "Date Created" and exactly when you get the error? I tried to enter my time zone (eastern US) as "-5:00", but Aperture wouldn't let me enter the 5 and popped up the error message when I typed that key. I had to use "-05:00".
As for the caption, when I hit return, Aperture ends my edit. I cannot reproduce your described behavior of actually getting a new-line into the field. I suspect your problem (although I don't know how you get to your problem) is one of the following:
1) The IPTC standard doesn't tell if the software should use a Unix-style end-of-line (which is a line-feed), or a DOS/Windows style end-of-line (which is carriage-return followed by line-feed). Aperture may put in the Unix-style and your Windows programs don't know what to do with it.
2) The IPTC standard does indicate the end-of-line style, but either Aperture or your other programs don't follow it.
or
3) IPTC Metadata doesn't actually support end-of-line, so Aperture should not allow you to enter multiple lines, but it has a bug so it does allow you to do that.
Can you tell us where exactly you are editing the caption? I tried it in the inspector pane (on the left) in the "Metadata" tab, and then I hit the "IPTC" button at the bottom of the tab.
nathan

How can I change the administrators original password on my new mac pro?

How can I change the administrators original password if I've forgotten it.

IflyDavie wrote:
I need help to delete my icloud account from my iPad. It has "Find my iPad" on it and won't let me delete without the old password. I don't want to reset password as it will require reset of Mac Book Pro and 2 iphones. Help appreciated.
Your description of the problem is a bit confusing. Do you have ONLY ONE Apple ID or do you have MORE THAN ONE?

Re: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349

Reference discussion: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
With reference to the above discussion and your explanation for user EXIT QAAAT0001, it was stated that:
If you only have two inspection types, you can mark one as preferred. Then with exit use logic that if MM = 311 use preferred inspection type, if 911 use, non-preferred inspection type.
May I ask what are you refer to for MM? It seems like movement type to me, however, I can't find movement type field in the structure within the component of EXIT_SAPLQAAT_002. Appreciate if you could shed some light on this.
Best Regards,
CY
Branched from older discussion by moderator. When there are questions concerning an older discussion, please create a new discussion with reference to the older one. Thanks!

Yes.. you are correct. But with the info that is provided by EXIT_SAPLQAAT_002, you should be able to identify the proper material document in table MSEG which will have the material movement.
You can use the values of plant, batch, material number, Purchase order number, Order number, item number, storage location as well as the current date since the exit would normally be executed on the same date the material movement was done. You'd also probably only execute the logic if QKZ is "X".
Craig

Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?

Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?
Thanks in advance.

1. On your computer, yes. Use Boot Camp, Parallels Desktop, VMware Fusion, VirtualBox, or similar software.
2. No; if you use an emulator, it may install system components. Back it up anyway.
(110033)

Lightroom is not saving metadata. I have done several things to save and I still get the tag that states is is not saved. I have also created 2 smart collections. One showing metadata has been changed and one showing metadata is not up to date. No matter

Lightroom is not saving metadata. I have done several things to save and I still get the tag that states is is not saved. I have also created 2 smart collections. One showing metadata has been changed and one showing metadata is not up to date. No matter what I do it is not showing in LR that it is saved. I spent 2 days with Seth Resnick trying to correct this and we re created my catalog. It was ok, until I imported new images and same problem. Now I have a new problem, when I bring image to PS it saves it but does not bring back to LR. Am I the only one out there who has this problem?

See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

Hierarchy R3PRODHIER may only be changed in the original system

Hi Experts
I have created a new Product Hierarchy in R/3 when i try to replicated them into CRM by using initial replication of DNL_CUST_PROD1.system throwing an error saying : Hierarchy R3PRODHIER may only be changed in the original system R3LNT200. ....in the SMQ2 before doing initial replication of DNL_CUST_PROD1 status was green.
And again i try to replicated the DNL_CUST_PROD1 by reguest load which has run successfully and 3 blocks are generated then i run the initial replication of Material but status of initial replication status in waiting. which is not run i mean to say.
then i again created a Request load for Object Material and which is run success fully
but my problem is i did not see the new hierarchy and products too in Table COMM_PRODUCT
.and when i see status of the in DNL_CUST_PROD1in R3am1. which is in ABORT .
Hence i request you could you please help me inorder to make green status of the DNL_CUST_PROD1 in r3am1 so that i can able to nun material successfully
i would appreciate you help
thanking you
Regards
Swathi

Hi Swathi,
I'm assuming this development is copied from your production.
For example: Go to COMM_PRODUCT table and check the log sys field. Now it will show the Production Logical System. So you need to convert this value.
After the client copy, basis needs to execute BDLS transaction. This transaction is used to convert the logical systems in all the Database Tables.
     Perform this conversion only for Client Dependent Tables.
     Execute below conversion in CRM Development Box
                   CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                   ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
      In ECC Development Box
                   CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                   ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
Regards,
Bhanu

Mass change of the Original System

Hello Experts!!!
We need to do a massive change of the original system to avoid repair tasks. I know that thru SE03 or SM30->TADIR is possible, but we need to do it to all objects in the system.... I think It might exist a standar tool for that... what do you think???
Thanks a lot!!!!
Frinee

Also interesting: transport of copies / relocation of objects
http://help.sap.com/saphelp_nw70/helpdata/EN/57/38e1a94eb711d182bf0000e829fbfe/frameset.htm
Thomas

Export photos with original metadata

I have original photos that states the time taken and all other datas of my camera but once I edited and export from aperture, the new photos do not have the original metadata in it anymore. Is it possible to export photos with the original/master metadata?

How are you viewing the "metadata time"?
The file creation date is not the same as the metadata field "Date".
To view the metadata of an image-format file created by exporting an Image from Aperture, open it in Preview (the app that comes with OS X), run "Tools➞Show Inspector", and click the "Exif" tab.

Set ZATTR_PROD may only be changed in the original system

Please,
Iu2019ve enhancement the PRODUCT_CUSTOMER2 BADI to change product attribute type when Iu2019m replicating products from ECC to CRM.
When I try to replicate the material from ECC to CRM thereu2019s the follow error:
"Set ZATTR_PROD may only be changed in the original system"
How can I solve it?
Thanks in advance
Edited by: Ronaldo Alvarenga on Oct 25, 2010 11:17 PM

Hello,
Maintain an entry for Z* settype in below path:
SPRO>IMG>CRM>Master Data>Products>Enhancements>Allow Changes to Product Data.
Hope this helps!
Best Regards,
Shanthala Kudva.

TS4002 when I was assigned my ".me accounts.... I used the name of the company that I worked for. Then I received a iCloud account. The problem is I want to change the two original names but can't because they're greyed out. Is there anything I can do?

When I was assigned my ".me accounts I used the name of the company that I worked for. Then I received a iCloud account. The problem is I want to change the two original names but can't because they're greyed out. Is there anything I can do?
Thanks in advance,
Majormidi

http://discussions.apple.com/thread.jspa?messageID=3366422
Odd, the link works for me.
-mj
[email protected]

Keeping original metadata from Photoshop CS Raw files on import to Lightroom 2.7

I've been importing old Raw photos that I had originally worked on in Adobe Photoshop CS (the original CS). I used the browser feature to edit my Raw files and add caption information. I am now using Lightroom 2.7 and upon import I am "loosing" all that original metadata. I kept all the XMP sidecar files beside the RAW files.. so what can I do to get Lightroom to recognize and use that original metadata?
Thanks so much for help on this.
Best,
Forrest MacCormack

If there is a .xmp file with the same name in the same directory as the raw file, LR DOES take the XMP data into account on import.
Forres: Would you be able to upload a sample raw and xmp file to somewhere (i.e. www.yousendit.com) and post a link to it here?
Beat Gossweiler
Switzerland

Metadat Change After Edit Original

When I take say a TIFF file that has been imported into Lightroom and edit in PS by choosing "Edit Original" and than save the edit in PS, when I get back to Lightroom the image has a metadata error icon on it. When I click on the icon it asks if it should apply the disk or Lightroom metadata. I click on disk and all seems well. But why is it doing this and is there a way to get it not to do so? Is it correct to use the disk metadata?
Thanks.
Howard

A couple of possiblities, not doubt more, but the following are the most obvious reasons for the badge appearing:
1. Aryou applying metadata to file on import but not saving it back to the original file?
2. Do you by any chance have the preference for Photoshop history log enabled? If it's enabled your Photoshop edits are recored to metadata (i.e. the default when On). You can check the status in the General panel of Photoshop Preferences.

How to change location information under metadata tab?

When I use the search box under the Places icon to assign a location to a photo, sometimes Aperture places a pin near but not directly on the place I have identified and puts an incorrect location in the tag. If I zoom in, I can accurately place the pin, and the tag then changes to the correct location. The problem is that both correct and incorrect locations display in the location box in the metadata field. I've tried completely eliminating the incorrect location with Manage my Places. I've tried removing the location from the photo and starting again. In both cases, both original locations remain in the location box under the Metadata tab. This makes using the search function for places worthless since there are so many false hits.
Is there anyway to modify the location box under the metadata tab once in contains inaccurate information?

I tried inserting a screen shot here, but I got a message that said "The content type of this image is not allowed." Let me see if I can explain more clearly.
To assign places, I have begun by clicking on the Places icon on the upper right hand side of the screen where the choices are Browser, Split View, Viewer, Faces, Places, Loupe, Full Screen. When I click on Places, I get a search box where I put the place I want to assign to a photo. Sometimes, when I see the location I want in the search results and click on Assign, Aperture puts a pin close to the desired location (but not exactly on it) and gives it a random place name (not the one I chose). If I zoom in and put the pin exactly where I want it, the place name changes to the one that I searched for to begin with. So far so good.
On the left hand column of the screen, there are three tabs at the top of the column - Library, Metadata, and Adjustments. If I click on the Metadata Inspector and look at the Location box at the bottom of that screen for the photo I've just described above, I see two locations listed - the first incorrect place name as well as the correct location that I changed it to when I moved the pin.
I've tried three things unsuccessfully to get around this problem.
In the Metadata drop-down menu, I've used Manage Your Places to delete the wrong location altogether. It disappears from my list of locations there, but it remains in the Location box for the in individual picture in the Metadata Inspector. From the Action pop-up menu (the gear icon) for the individual photo in the Metadata Inspector, I've chosen Location Name and selected the single name that I want. Both names remain in the Location box. I've had a One-on-One session at the Apple Store. (I took my computer with me so that she would see exactly what I was talking about.) The woman there told me that she thinks that this is a bug, and she doesn't know how to get around it. It was she who recommended that I try the Apple Support Communities to see if anyone has solved this.

Changing of "DateTime Original" Metadata by LR1.4

Similar Messages

Maybe you are looking for