Changing of Logical system

Hi SAPERS,
Please provide me the process of changing of logical system of Back end and Front end system, What are the prereqesits are there before that. I tryed BDLS t code, but at the time of changing the sytem is

Hi shah kond,
you can change  rfc destinations of model in 2 differnet ways.
firs one: right clcik on project
          from the context menu select propeties
          it will open a dialogbox from that select dynpro references then click on jco references tab
by using add and remove buttons u can add and remove joc destnations
2.expand ur model class double click output class.now seelct properties view.there u can change the jco destination
hope this will use ful for u
Regards
Naidu

Similar Messages

  • JDBC to Idoc scenario - change of logical system name

    Hi,
    I have a JDBC to idoc scenario that worked. Now i had to change the logical system name from my sender system from ABC_123 into ABC123 in the SLD (Business System - Integration - Logical System name). I did so and also refreshed my Cache.
    Afterwards I started the process, but it failed in the Receiver system. The idoc is correct expect of the partner name. My receiver system expect ABC123 - as I changed in the SLD - but PI send ABC_123.
    If io look in SXI_CACHE - Services my Business System still got the "old" name (ABC_123).
    Did i miss something resp. how can i load the current configuration from SLD?
    Thanks in advance
    Michael

    Hi Michael,
    Again Import the changed logical system in the Integration directory of you PI system.
    And check the scenario (Sender Agreement, Receiver agreement ) what system they are reflecting.
    If they are showing old system then you have to replace the business system in all the scenario.
    Edited by: Rajhans Abhay on Jan 7, 2010 3:14 PM

  • RSA1 - Source system connection : Change in logical system name

    Dear friends,
    Can you please tell me how can i change the logical system name for a source system connection.
    There is no change in source system & source system connection check works well, just we have decided that from current logical system name SID_100 should be changed to SIDCLNT100.
    Can i do this by running BDLS in BW for RSBASIDOC table from SID_100 to SIDCLNT100 ?
    thanks
    ashish

    HI Sunny,
    This is not the same problem, may be similar though..i am not getting a way.
    let me describe u in a bit more details.
    Currently, we have a working source system connection to a system SID_CLT.  there is no change in source system.
    now, can i change this system connection technical name from SID_CLT to SIDCLNT*** .. 
    thanks
    ashish

  • Changing Default logical system names of a model.

    Hi
        How could i change the
         Default logical system name for model instances:
         Default logical syatem name for RFC metadata:
        values for existing model? without recreating the model.
         Thanx

    Hi shah kond,
    you can change  rfc destinations of model in 2 differnet ways.
    firs one: right clcik on project
              from the context menu select propeties
              it will open a dialogbox from that select dynpro references then click on jco references tab
    by using add and remove buttons u can add and remove joc destnations
    2.expand ur model class double click output class.now seelct properties view.there u can change the jco destination
    hope this will use ful for u
    Regards
    Naidu

  • Change of logical system name

    Dear Experts,
    I have following situation in ECC 6 EHP4 system:
    a system copy of PRD system was peformed on QAS. POst system copy BDLS was NOT run, and logical system of QAS client was maintained manually.
    Now  client 300 in QAS has logical system as QASCLNT300 (after copy it was PRDCLNT300). The problem is that many accounting documents still point to PRDCLNT300 and hence can not be viewed now since log sys is QASCLNT300 now.
    I can not run bdls now bcoz for BDLS target logical system should be new. Also for last few months new accounting docs has been generated for QASCLNT300.
    Is there any way around? pls suggest
    -Thanks,
    Richa

    This is a situation , where you cannot run BDLS now and you face issues with accounting docs .
    As far as I feel , you will have have to redo the system copy and run BDLS again. The logical system name should never be maintained manually in SCC4.
    Edited by: Ratnajit Dey on Jan 2, 2012 12:16 PM

  • Is it possible to change the Logical System name in ID

    Hi,
    I am doing a file to Idoc scenario. My requirement is to overwrite the logical system name, which is set in SLD for sender (system). Is it possible to overwrite it in ID or in mapping somewhere.
    Thanks,
    Dehra

    Hi Dehra,
           Go through the below help file of SLD. It will give you information regarding logical name as well:
    <a href="http://xiserver:50100/sld/doc/sld.pdf">http://xiserver:50100/sld/doc/sld.pdf</a>
    Regards,
    Subhasha

  • Logical System Change for Production System

    Hi experts
    We have new CRM and BI project.  Logical System name of our ERP production system is not in naming standart. So we want to change logical system name and run BDLS in production system.
    Is there any risk about this prosedure?
    Best Regards...

    Hi,
    It is not advisable to change the logical system in production client once its assigned.
    Regards,
    Nisit

  • Logical system name change

    Hi all,
    Now my BI development is pointing to R/3 development. R/3 logical sytem name is bbbclnt100. Now all my datasources are pointing to this logical system. Our basis people are going to change the logical system of R/3. Please tell me the repercussions? what will happen to my datasources?
    Thanks in advance

    Anni,
    Change logical system name and run BDLS job to adjust. Do not change souce system. If you change source system all transfer rules will get deactivated.
    Check: [Conversion of Logical Systems|http://help.sap.com/saphelp_nw70/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/frameset.htm]
    Search forum for more links.
    Srini

  • Transaction Launcher: Logical System in Production System does not change

    Hi,
    I created a transaction launcher in the CRM development system (CRD) to launch the transaction IL02 in the ECC 6.0 system (ECD). Then I transported the changes from CRD to the CRM production system CRP. I also transported the changes from ECD to ECC production system ECP.
    However, when I see the transaction launcher in CRP system, it is still configured for the URL of ECD. I want the transaction launcher to connect to ECP. One option I have is to change the class name in the CRP system. However, I am not allowed to create a new ABAP class in the production system. Is there any other way to change the target system automatically in production system?
    Thanks,
    Rohan.

    Thanks Piyush. Could you be a bit more specific? I followed these steps:
    1. In transaction CRMS_IC_CROSS_SYS, created a logical system URL for production system
    2. In customizing setting Copy/Delete Launch Transactions, deleted the transaction launcher id.
    3. In customizing setting Configure Transaction Launcher, created the same transaction launcher id newly.
    I still am not able to change the logical system. However, I can do it if I change the class name.
    While deleting the transaction launcher id, should I be deleting all dependencies?
    Regards,
    Rohan.

  • How to change or rename the logical system name T90CLNT090 IN BI 7

    HI Expert's,
    i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
    in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
    In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
    because of this i am not able to create the source system between r/3 also.
    so how to change this source system name for T90CLNT090.
    regards
    harikrishna N

    Hi,
    Pls follow this OSS note : 325525.
    Note 325525 - Copying and renaming systems in a BW environment
    Summary
    Symptom WARNING: THIS NOTE HAS BEEN REPLACED.  FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
    You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
    Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
    Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
    Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
    Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
               Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
               Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
               Reactivate all partner agreements that carry the new logical system name after renaming.
    Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
               Solution scenario 2):
    If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                        Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                        Reactivate all partner agreements that carry the new logical system name after renaming.
    Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
    Scenario 3) You want to copy a single BW system of the group by database copy.
    Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                         Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
    Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                         Solution scenario 3)b): See Note 184754.
    Scenario 4) You want to copy a single source system of the group by database copy.
    Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                         Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
    Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
               Solution scenario 4)b): See Note 184322.
    Scenario 5) You want to import a client copy in a source system.
               Solution scenario 5): See Note 325470.
    Thanks & Regards,
    Suchitra.V

  • SLD Logical System Name Changes not taking effect in IDOC

    All -
    I've had to change a logical system name in the SLD, everything appears to be okay but new Idocs are still posting with the old LS name - any suggestions as to where to look for the old name would be most appreciated.
    Thanks!

    Hi Dennis,
    After changing the logical system name in SLD have you done "Compare with  SLD" from Service --> "Adapter-Specific Identifiers" for Business system in Integration Directory?
    - Pinkle

  • Problem: logical system has been changed once it has already been assinged

    hai,
    we have started ebp configuration with a fresh client.and we assinged logical systems,but unfortunately someone has worked in the same client and made his own logical name...but later in console transaction the system promts that you have no backend rfc connection.my senior told that someone has changed..i tried to rectify in smoeac trx....but the system cannot takes the receiver logical id....plz tell me anyone how to solve my problem...hx in advance

    Hi
    Please check first in scc4 what is the logical system for your client . Ask your administaror to broadcast a message not to change a logical system to every one.so that everyone uses only one logical system for one client.
    regards
    Muth

  • Changing Logical System after System Copy

    We just did a system copy of our Production system onto our QA system.  I created the new Logical Name (QR3) through BD54 but when I try to change it in SCC4, it will not allow me to. 
    Do I need to make this change through another transaction?
    thanks.
    Marie

    another way to change the logical system
    name is to run /nbdls with the system copy option.
    This will also create the logical system name
    and update the scc4 entry for you. As well
    as that it will change all reference to the old
    logical system name to the new one.
    This is especially important if your SAP system
    connects to others eg CRM, BW, APO etc.
    regards
    Tom

  • Change logical system names after system copy

    Hi!
    We successfully installed SAP ECC 6.0 system as system copy.
    All the logical system names of old system have been copied to new system.
    Question
    What is the approach to change the logical system names for new SAP system?
    a) just via tcode SCC4
    b) via BDLS
    c) other tcodes, reports
    Thank you very much!
    regards
    Jürgen

    Hi,
    Go though the system copy guide.
    http://service.sap.com/instguides
    After system copy,
    If you need to change logical system names in the system that results from the copy, change the logical system names as described in SAP Notes 103228 and 544509.
    https://service.sap.com/sap/support/notes/103228
    https://service.sap.com/sap/support/notes/544509
    Before running BDLS to change the logical system name, you have to define the correct logical system name in the new copied system. in tcode BD54.
    - while running BDLS, execute in background.
    Regards,
    Debasis.

  • Cannot change PO's in SRM due to system copy/ logical system error

    Hi All-
    We are running SRM extended classic scenario.  We would like to change PO's that have been created in our production system, but copied to another environment.  We are trying to change these PO's in the copied system but are getting error messages in the process purchase orders transaction in SRM, and are not allowed to change the PO's.  The message reads "purchase order contains items with different logical systems".  Our basis team changes the logical systems as part of our system copies.  Has anyone experienced this?  I this part of standard SAP functionality?  Are their logical systems in any of the transactional data(PO) tables that we need to change?
    Also, we are deleting the material group/product hierarchy in comm_hierarchy as part of our system copy tasks because the material groups each have a GUI ID that is system dependent.  Could this have something to do with our issue?  Any feedback is greatly appreciated.
    Thanks.

    Hey John,
    Yes I'm still at CA.  How are you? 
    I checked bbp_pd and the logical systems are changed correctly to the copied system, not set to production.  Am I missing something here? Should they be set to production logical system names even though I am trying to change the PO in the copied system?
    Thanks!

Maybe you are looking for

  • SAPSCRIPT: Printing international characters on ZEBRA; How to do?

    Hi, I use software NiceLabel software to design barcode forms. I upload the design to so10 Sapscript text and print it on the Zebra ptinter. I used device tape ASCIIPRI. The SAP system is unicode. Now I need to print chinese pallet labels and I get u

  • Authentication Thru an external LDAP

    Hi I'm using Oracle database 10g r2. We have Tivoli Access Manager and Tivoli Identity Manager. I don't want migrate to OID. I'd like to provide authentication to Oracle, Thru our existing LDAP. Is this possible ? if yes, is there a documentation som

  • Where do Drafts save to in Lion Mail V.5

    So on my Laptop I have Snow Leopard and I saved a draft in Mail v4.5. I go to my iMac Mail v5.0 with Lion and it doesn't a drafts area. So where did my draft actually save to? And what happens if I was using web mail on my own server to save a draft

  • Error in creating infoobject

    Hi Experts, While i am creating infoobject ZRSR01 with quantity data type and with a reference of ZRCR01,  i am  getting error saying that "Key figure ZRDSR01 is used in non-*** value ZRSPS01, type cannot be changed". Can any body help me how to solv

  • How can my co-worker and I set it up so we can see each others calendar like what is available in Outlook?

    One of my co-workers and I work very closely and schedule appointments for one another. In doing so it would really be convenient if I could open up his calendar to see when he would be available and he schedules meetings for us both as well. I know