Changing of the physical file name of the file after archiving

Hi all,
We are in process of archiving and completed the process successfully and archived to o:\PRODSID\<filename>.
When refresh is happening from Prod to Quality the archived data will come as O:\PRODSID\<filename> and the archived files will not be accessible since quality system is not able to find the path with O:\PRODSID\<filename>.
Is there anyway i can change the physical file name of the archived files to correct path O:\QUALITYSID\<filename>, i need to change only the SID only from PRD to QUALITY.
Thanks,
Subhash.G

Hi Subash,
Do you want change the Physical File name or the Path from PROD to SID.
Path :- in the transaction called FILE, double click on Logical Path Definition , select the Logical File and double click on "Assignment on Physical Path to Logical Path" and you can change FILENAME also here
Thanks,
Sravanthi

Similar Messages

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

Programaticly changing the (suggested only) file name in the save prompt when signing a document?

When you sign a document in Adobe X (or XI), the system says it needs to save the file first. Is there some way to change the (suggested only) file name to a different value for that save?
Right now, people open a blank form - lets call it formX.pdf. They fill it in and sign it. The suggested file name for the save is FormX.pdf. I can generate a unique file name which i'd like to put in place of the suggested default...

AFAIK, you can't do it with code. Your best option might be to use a form field to show a message to the user when they sign the document with that information.

Change File Name In The "File Download" Dialog Box For Web Reports

Hi All ,
I followed the below note to change the "File Download" name.
How To Change The File Name In The "File Download" Dialog Box For Web Reports? Doc ID: Note:418366.1
However its not working. Has anyone tried this and works fine ?
Basically I wanted to change the name "rwservlet" when a report is run in an
excel format.
Rajesh Alex
Rajesh Alex

Hello,
Have you checked if a HTTP header "Content-disposition" is returned ?
You can use ieHTTPHEaders for IE
http://www.blunck.se/iehttpheaders/iehttpheaders.html
and
Live HTTP Headers for FireFox
https://addons.mozilla.org/en-US/firefox/addon/3829
Regards

Assign Logical file name for the physical file path through Program

Hi all,
I am having a physical file which is getting generated dynamically. It is having the date and time stamp in its name which is added at runtime.
Now I need to assign a logical file name for the physical file path through the program.
Is there any FM or any other method to assign the same.
Gaurav

I think it is not possible. becuase the date & time added at runtime. so if you check the table PATH you can find filename and their definitions
a®

Error: Enter either the physical file name or the logical file name

Hi Expert,
I have error: Enter either the physical file name or the logical file name, when upload BP with external data transfer.
My Step:
1. Define Sender Structure
2. Define Transfer Rules
3. Start Transfer
When execute step 3, there's displaying error: Enter either the physical file name or the logical file name
Can you help my problem?
Any document/link for upload BP with external data transfer.
Thanks and Regards,

Hi,
See thread: [CO-PA External Data Transfer|CO-PA External Data Transfer]
Regards
Leon

Illustrator's font is different for some reason and hard to read, I need to change it so i can read all the tabs and file names. Like file, edit, options, type, select, effects..... swatches, layers.. every tab is in a different font that is hard to read

Illustrator's tabs are all in a different font that I can read.
I need to know how to change it so I can get back to a steady workflow.
For example..
File, edit, options, type, select, effects, view, windows, help..... pathfinder, layers, swatches, stroke, and the file name (all the tabs)
are all in a different font, I don't know how it got changed but now it is different.
This is a shared computer so someone might have changes it on accident but I'm not sure.

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Changing file names in the Information Pane

Why doesn't changing the names of photographs in the Information Pane also change the name of the files in the iPhoto Library folder??
If I import photos direct from my camera, the photos are stored with generic file names (like DSC_006) in the Original Folder and the Data folder in iPhoto Library folder. Once stored there, I understand that if you move, delete or "rename" any of those files "in the Finder" that iPhoto may not thereafter be able to see them.
But I don't understand why if you change those file names in the Information Pane from within the iPhoto application, why the actual file names in the Original and Data folder aren't correspondingly changed.
I would prefer to eliminate the generic file names and presently the only way that I can do that is to simply transfer the photos from the memory cards, change the file names and then import the files into iPhoto.
This seems like an unnecessary step.
Am I missing something here?

If you want the capability of editing the original file names they you'll need to upgrade to a more professional application like iView MediaPro. Aperture doesn't let you change the original file names from within the application.
If you need to the use file outside iPhoto with the same name as the Title in iPhoto then you can do just as PhillyPhan pointed out, export to the Desktop using the User Title option.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Changing file names in the Finder

Hi,
Is there a way to change the names of video files in the Finder then relink them in FCPX? I have some files that I imported from my camera. Unfortunately, the camera's date was incorrect. I'd like to change the file names via the Finder to the correct dates, then relink them to the associated projects in Final Cut Pro X. However, this doesn't seem possible: when I relaunch FCPX, the "new" files appear alongside the old files in the event library and there doesn't seem to be a way to relink them.
thanks,
fh

You can't relink files in FCPX. Best way to rename clips is within FCPX itself.
final
Batch rename clips using a naming preset
1. In the Event Browser, select the clips you want to rename.
2. To open the Info inspector, click the Inspector button in the toolbar (shown below), and click the Info button at the top of the pane that appears.
3. Choose Apply Custom Name from the Action pop-up menu and choose a naming preset from the submenu.
The clips selected in the Event Browser are renamed.

Should the web page address be included in the file name in the meta data dialog box?

In the page properties > meta data > below is a field with the label file name: (the the area to type in the field), after the field, it is labeled .html.
I have 2 questions here.
1. If I type in http//:www (my page url), do I include .html at the end? I didn't know if this is automatically added because it is off to the side of the field?
2. If I type in the entire URL address: http//:www (etc, etc).html, after closing the page properties dialog box, I make it a habit to double check my work. What happens is the http//:www.xxx changes to (htttpwww.xxx). It drops the //: on the URL.
So would it be better to just type in www.xxx (without the http//:www.xxx)
and do you type in the .html at the end?
I am assuming this will help with SEO page ranking or at least makes it easier for the search engines to crawl your site??
I hope this makes sense.
Advise would be very helpful.
Ben

You are absolutely correct with the URL Ben. Taking your above example, you just need to type in "Services" in the file name and the webpage will be exported as services.html and the URl will be www.xyz.com/services.html.
All the webpages (be it parent page or child page) gets physically saved at the root directory of your website on the server (where your website resides).
This name is just the name of the file using which it is physically stored and called from the server. It does not help search Engines to crawl deeper inside the website.
As I explained, "name which you wants the .html file to be stored with" here means the name of the physical file which is getting saved on the server.
Most users leave the file name same as Page name. If you have it different from page name then this will be the workflow :
Page Name : About
File Name : test
domain : www.mysite.com
Now if you are using a Menu Widget, it will list "About" in the Menu. And when end user will click on "About" then it will call the file named "test.html" from the server location (where all the files of your website are stored).
And it will open a page with address "www.mysite.com/test.html"
Hope I am able to explain the concept of File Name here. Please let us know if you have further queries on this.
Regards,
Sachin

How to put the file name in notepad file

dear frank,
how to put the file name in notepad file via power shell. I mean i want to put the file name in that notepad file
for example,
my file name is ABL and in this file data is
02/06/2015,180.00,182.00,176.01,180.50,1575500
02/06/2015,4.20,4.20,4.20,4.20,500
02/06/2015,113.50,113.70,112.91,113.09,157800
02/06/2015,682.01,695.90,682.00,683.19,4250
02/06/2015,213.98,215.00,213.00,214.87,326200
02/06/2015,21.52,21.65,21.52,21.60,4000
02/06/2015,111.00,111.25,108.25,108.91,17100
02/06/2015,52.00,52.00,52.00,52.00,500
and i want to data in this form
ABL,02/06/2015,180.00,182.00,176.01,180.50,1575500
ABL,02/06/2015,4.20,4.20,4.20,4.20,500
ABL,02/06/2015,113.50,113.70,112.91,113.09,157800
ABL,02/06/2015,682.01,695.90,682.00,683.19,4250
ABL,02/06/2015,213.98,215.00,213.00,214.87,326200
ABL,02/06/2015,21.52,21.65,21.52,21.60,4000
ABL,02/06/2015,111.00,111.25,108.25,108.91,17100
ABL,02/06/2015,52.00,52.00,52.00,52.00,500
There are many file like this that i want to be edit
plese tell me how can i do it, i think it is possible via windows power shell.
thanks in advance.

Hi
Just for completeness, what version of VB.NET are you using?
Here is a complete project to copy all the files with the added "ABL," at the start of each line. You need to start a new Project with a BLANK default Form1, and replace all of Form1 code with the code below. When you run this project, you
need to use the 2 buttons to set up the ORIGINAL file folder and a folder to place the copies. You need to check if the file EXTENSION is correct (I assumed txt), and check the text to add to each line is correct. Once all is set up you should have a
big red button to start the operation.
NOTE: it is important that you try this out on a copy of some of the files to verify accuracy BEFORE trying on original files. Make sure you have a good back up of the original files before doing anything else.
' new project with default BLANK Form1
' replace all Form1 code with this code
' WARNING: make sure you have a backup of
' any files you use this application to
' operate on.
Option Strict On
Option Infer Off
Option Explicit On
Public Class Form1
Dim OrigFileFolderPath As String = Nothing
Dim CopyToFolderPath As String = Nothing
Dim lab1, lab2, lab3 As New Label
Dim tb1, tb2, tb3 As New TextBox
Dim b1, b2, b3, b4 As New Button
Dim fb As New FolderBrowserDialog
Dim bgw As New System.ComponentModel.BackgroundWorker
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
Me.Size = New Size(731, 300)
With lab1
.Text = "Original Files Folder Path"
.Location = New Point(15, 5)
End With
With tb1
.Width = 560
.Location = New Point(10, 30)
.BackColor = Color.Khaki
.ForeColor = Color.Maroon
.Font = New Font(Me.Font.FontFamily, 12)
.BorderStyle = BorderStyle.FixedSingle
.Anchor = AnchorStyles.Top Or AnchorStyles.Left Or AnchorStyles.Right
End With
With lab2
.Text = "Copy Files to Folder Path"
.Location = New Point(15, 125)
End With
With tb2
.Width = 665
.Location = New Point(10, 150)
.BackColor = Color.Khaki
.ForeColor = Color.Maroon
.Font = New Font(Me.Font.FontFamily, 12)
.BorderStyle = BorderStyle.FixedSingle
.Anchor = AnchorStyles.Top Or AnchorStyles.Left Or AnchorStyles.Right
End With
With lab3
.Text = "File Ext"
.Location = New Point(600, 5)
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
End With
With tb3
.Text = ".txt"
.Width = 80
.Location = New Point(590, 30)
.BackColor = Color.Khaki
.ForeColor = Color.Maroon
.TextAlign = HorizontalAlignment.Center
.Font = New Font(Me.Font.FontFamily, 12)
.BorderStyle = BorderStyle.FixedSingle
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
End With
With b1
.Text = "Choose Original Files Folder Path"
.AutoSize = True
.Location = New Point(10, 65)
End With
With b2
.Text = "Choose Copy Files to Folder Path"
.AutoSize = True
.Location = New Point(10, 185)
End With
With b3
.Text = "DO THE COPY"
.AutoSize = False
.Size = New Size(240, 50)
.BackColor = Color.Red
.ForeColor = Color.White
.Font = New Font(Me.Font.FontFamily, 20, FontStyle.Bold)
.Location = New Point(420, 80)
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
.Visible = False
End With
With b4
.Text = "CANCEL JOB"
.AutoSize = False
.Size = New Size(240, 50)
.BackColor = Color.Red
.ForeColor = Color.White
.Font = New Font(Me.Font.FontFamily, 20, FontStyle.Bold)
.Location = New Point(420, 80)
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
.Visible = False
End With
Me.Controls.AddRange({lab1, lab2, lab3, tb1, tb2, tb3, b1, b2, b3, b4})
With bgw
.WorkerReportsProgress = True
.WorkerSupportsCancellation = True
End With
AddHandler bgw.DoWork, AddressOf bgw_DoWork
AddHandler bgw.RunWorkerCompleted, AddressOf bgw_Completed
AddHandler b1.Click, AddressOf b1_Click
AddHandler b2.Click, AddressOf b2_Click
AddHandler b3.Click, AddressOf b3_Click
AddHandler b4.Click, AddressOf b4_Click
End Sub
Private Sub b1_Click(sender As Object, e As EventArgs)
fb.SelectedPath = My.Computer.FileSystem.SpecialDirectories.MyDocuments
fb.ShowNewFolderButton = False
Dim r As DialogResult = fb.ShowDialog
If r = Windows.Forms.DialogResult.OK Then
tb1.Text = fb.SelectedPath
If IO.Directory.Exists(tb1.Text) AndAlso IO.Directory.Exists(tb2.Text) AndAlso Not (tb1.Text = tb2.Text) Then
If tb3.Text = Nothing Then
redo: tb3.Text = InputBox("Enter the file extension that you want to copy/change", "FILE EXTENSION")
If tb3.Text = Nothing Then GoTo redo
End If
b3.Visible = True
Else
b3.Visible = False
End If
End If
End Sub
Private Sub b2_Click(sender As Object, e As EventArgs)
fb.SelectedPath = My.Computer.FileSystem.SpecialDirectories.MyDocuments
fb.ShowNewFolderButton = True
Dim r As DialogResult = fb.ShowDialog
If r = Windows.Forms.DialogResult.OK Then
tb2.Text = fb.SelectedPath
If IO.Directory.Exists(tb1.Text) AndAlso IO.Directory.Exists(tb2.Text) AndAlso Not (tb1.Text = tb2.Text) Then
If tb3.Text = Nothing Then
redo: tb3.Text = InputBox("Enter the file extension that you want to copy/change", "FILE EXTENSION")
If tb3.Text = Nothing Then GoTo redo
End If
b3.Visible = True
Else
b3.Visible = False
End If
End If
End Sub
Private Sub b3_Click(sender As Object, e As EventArgs)
b3.Visible = False
b4.Visible = True
If Not tb3.Text.StartsWith(".") Then tb3.Text = "." & tb3.Text
bgw.RunWorkerAsync()
End Sub
Private Sub b4_Click(sender As Object, e As EventArgs)
bgw.CancelAsync()
End Sub
Private Sub ReadPWFile(fn As String)
Dim filename As String = My.Computer.FileSystem.GetName(fn)
Dim barename As String = IO.Path.GetFileNameWithoutExtension(fn)
Dim copyto As String = tb2.Text & "\" & filename
Dim line As String = Nothing
Dim lines As New List(Of String)
Using sr As IO.StreamReader = New IO.StreamReader(fn)
Do
line = sr.ReadLine()
If Not line = Nothing Then
lines.Add(barename & "," & line)
End If
Loop Until line = Nothing
End Using
Using sw As IO.StreamWriter = New IO.StreamWriter(copyto)
For Each s As String In lines
sw.WriteLine(s)
Next
End Using
End Sub
Private Sub bgw_DoWork(sender As Object, e As System.ComponentModel.DoWorkEventArgs)
Dim ftc As Collections.ObjectModel.ReadOnlyCollection(Of String) = My.Computer.FileSystem.GetFiles(tb1.Text)
For Each f As String In ftc
If bgw.CancellationPending Then
e.Cancel = True
Exit For
End If
Dim ex As String = My.Computer.FileSystem.GetFileInfo(f).Extension.ToLower
If My.Computer.FileSystem.GetFileInfo(f).Extension.ToLower = tb3.Text.ToLower Then
ReadPWFile(f)
End If
Next
End Sub
Public Sub bgw_Completed(sender As Object, e As System.ComponentModel.RunWorkerCompletedEventArgs)
tb1.Text = Nothing
tb2.Text = Nothing
b3.Visible = False
b4.Visible = False
MessageBox.Show("Finished copying files", "Job Completed")
End Sub
End Class
Regards Les, Livingston, Scotland

Path and File name of the attachment

Hello Srm Guys,
Where should be the Path and File name of the attachment are stored for a shopping card Item.
Thanks
Ram

Hello Ram,
Execute the function module BBP_PROCDOC_ITEM_GETDETAIL by providing the item guid,object type . Now it will populate the et_attach importing parameter with the attatchement details.
In the ET_ATTATCH internal table , the field PHIO_FNAME/PHIO_PATH_FILE provides the physical storage location of the document.
Hope this info will be helpful.
Regards,
Mani

"Could not save (file name) because the file is already in use or left open."

Hello,
When I tried save as a file, I get an error msg:
"Could not save (file name) because the file is already in use or left open."
The file is not open anywhere accept Photoshop.
Mac Pro, OSX 10.5.6
Photoshop CS4.
I searched the forum but could not find anything even though i'm sure someone already asked it.
would love to get a solution for that.
thank you,
shlomit

There is a problem with both Photoshop and InDesign, then we can blame wich ever it is.
1. I open a .psd file in Photoshop CS4 by double clicking it in Bridge
2. This image is placed on a page in a open InDesign document.
3. Doing some changes in Photoshop on the image.
4. Trying to save and get this error message (this topics subject)
5. Deleting the image from the page in ID doc, it is the only one in the document.
6. Can't still save file.
7. Closing ID completely and now I am able to save the file.
I tried turning of Live preflight in Indegisn but that didn't help.
So probably the fault is InDesign or the MacOS. I didn't have this problem with CS3. It is a stupid problem because this type of workflow is pretty common and one would expect it to be solved by now.
Jan Suhr
Stockholm, Sweden

How to obtain the file name of the cached file

Hi All,
I am using JMF to play a MP3 file from an HTTP link and I need to know the file name of the locally cached file. I found that I can obtain the cache directory using Manager.getCacheDirectory() and I can see the cached file there but its file name is changed.

I once had a similar task for creating a webpage that I only use on my computer--a webpage that accesses PDF's and SWF's font previews from a list of fonts as "a href's". What you must do is utilize the power of the command line, whether on a Mac on a PC or on Linux, Linux being the most powerful (although Mac IS Unix). You must utilize variables, variable replacement, and then a command to print out the results of a "for" or "while" loop to a text file which will be your HTML file with each individual link automatically built into the HTML code. You will have a list of 50 links. If you are simply looking for a GOOGLE type functionality where you click on "Next" and "Previous" you will have to dig deeper into variable replacement--this I don't know how to do yet but there are books for command-line shell interpreters. One shell interpreter is called "bash" (born-again shell) and there is a book on the market which gives a detailed example of how to replace variables in a shell script. Again, I don't know how it works. I will try to learn this at a later time when I am more seasoned with the basics of shell scripting.

Different log file name in the Control file of SQL Loader

Dear all,
I get every day 3 log files with ftp from a Solaris Server to a Windows 2000 Server machine. In this Windows machine, we have an Oracle Database 9.2. These log files are in the following format: in<date>.log i.e. in20070429.log.
I would like to load this log file's data to an Oracle table every day and I would like to use SQL Loader for this job.
The problem is that the log file name is different every day.
How can I give this variable log file name in the Control file, which is used for the SQL Loader?
file.ctl
LOAD DATA
INFILE 'D:\gbal\in<date>.log'
APPEND INTO TABLE CHAT_SL
FIELDS TERMINATED BY WHITESPACE
TRAILING NULLCOLS
(SL1 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL2 char,
SL3 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL4 char,
SL5 char,
SL6 char,
SL7 char,
SL8 char,
SL9 char,
SL10 char,
SL11 char,
SL12 char,
SL13 char,
SL14 char,
SL15 char)
Do you have any better idea about this issue?
I thought of renaming the log file to an instant name, such as in.log, but how can I distinguish the desired log file, from the other two?
Thank you very much in advance.
Giorgos Baliotis

I don't have a direct solution for your problem.
However if you invoke the SQL loader from an Oracle stored procedure, it is possible to dynamically set control\log file.
# Grant previleges to the user to execute command prompt statements
BEGIN
dbms_java.grant_permission('bc4186ol','java.io.FilePermission','C:\windows\system32\cmd.exe','execute');
END;
* Procedure to execute Operating system commands using PL\SQL(Oracle script making use of Java packages
CREATE OR REPLACE AND COMPILE JAVA SOURCE NAMED "Host" AS
import java.io.*;
public class Host {
public static void executeCommand(String command) {
try {
String[] finalCommand;
finalCommand = new String[4];
finalCommand[0] = "C:\\windows\\system32\\cmd.exe";
finalCommand[1] = "/y";
finalCommand[2] = "/c";
finalCommand[3] = command;
final Process pr = Runtime.getRuntime().exec(finalCommand);
new Thread(new Runnable() {
public void run() {
try {
BufferedReader br_in = new BufferedReader(new InputStreamReader(pr.getInputStream()));
String buff = null;
while ((buff = br_in.readLine()) != null) {
System.out.println("Process out :" + buff);
try {Thread.sleep(100); } catch(Exception e) {}
catch (IOException ioe) {
System.out.println("Exception caught printing process output.");
ioe.printStackTrace();
}).start();
new Thread(new Runnable() {
public void run() {
try {
BufferedReader br_err = new BufferedReader(new InputStreamReader(pr.getErrorStream()));
String buff = null;
while ((buff = br_err.readLine()) != null) {
System.out.println("Process err :" + buff);
try {Thread.sleep(100); } catch(Exception e) {}
catch (IOException ioe) {
System.out.println("Exception caught printing process error.");
ioe.printStackTrace();
}).start();
catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
public static boolean isWindows() {
if (System.getProperty("os.name").toLowerCase().indexOf("windows") != -1)
return true;
else
return false;
* Oracle wrapper to call the above procedure
CREATE OR REPLACE PROCEDURE Host_Command (p_command IN VARCHAR2)
AS LANGUAGE JAVA
NAME 'Host.executeCommand (java.lang.String)';
* Now invoke the procedure with an operating system command(Execyte SQL-loader)
* The execution of script would ensure the Prod mapping data file is loaded to PROD_5005_710_MAP table
* Change the control\log\discard\bad files as apropriate
BEGIN
Host_Command (p_command => 'sqlldr system/tiburon@orcl control=C:\anupama\emp_join'||1||'.ctl log=C:\anupama\ond_lists.log');
END;Does that help you?
Regards,
Bhagat

Changing of the physical file name of the file after archiving

Similar Messages

Maybe you are looking for