Changing Oracle XE SMTP server.

I am running Oracle XE on Vista Home Basic and as you may expect this version of Vista doesn't run SMTP or WWW server. Anyways, I wanted to use a remote SMTP sever, say smtp.mydomain.com. I found where to change the default SMTP server from "localhost" to "smtp.mydomain.com" - it is on
Home>Application Builder>Application Administration>Email Configuration>Email Environment Settings
the problem is that my SMTP server requires autentication and I see no place where to enter the user name and password. Can somebody help me with this?
George

You can achieve your objectives by using the UTL_SMTP package.
UTL_SMTP
{message:id=1320165}
{message:id=3416587}
{thread:id=288758}
{message:id=3649012}
{message:id=1426409}
{message:id=932565}
Regards,
PhiriAPEX SMTP Search Reults<a/>
{message:id=1320165}
{message:id=3416587}
{thread:id=288758}
{message:id=3649012}
{message:id=1426409}
{message:id=932565}
Regards,
Phiri

Similar Messages

Changing verizon primary smtp server??

hi,
i'd like to change the primary smtp server for my verizon email.
it's currently set to : outgoing.verizon.net
and according to a recent email from verizon, i should change it to|
smtp.verizon.net
(all the other info doesn't change (passwords, ports, etc)
if i tweak the primary smtp server and change the hostname from 'outgoing' to 'smtp'
then hit 'done', the settings app crashes and doesn't update the settings.
any help would be appreciated,since i can currently recieve mail, but can't reply on that account!
lcubed
iphone 5/ios 6.1.3

This probably means that your mail app data are corrupted. First, try resetting the phone by holding the HOME and SLEEP buttons until an Apple logo appears. The try to change the setting again. If it still fails, delete the Verizon account, Reset the phone again, and add the account back.

The mailbox I set up has suddenly change the outgoing SMTP server to offline. Whatever I do I cannot edit it to become online

the mailbox I set up has suddenly change the outgoing SMTP server to offline. Whatever I do I cannot edit it to become online

Hello Jeba1969
Use Connection Doctor to see what is causing it to be offline, like a incorrect password or a different setting for authentication. Check out the article below to get a start on troubleshooting your issues with sending mail.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Mail Setup Assistant
http://www.apple.com/support/macosx/mailassistant/
Regards,
-Norm G.

How do I change the primary SMTP server address on my iPhone DOT-MAC accoun

My original account smtp settings were for dot-mac. I am having ever increasing problems getting mail to send. I can find the settings for my primary SMTP server, but cannot edit or update them (currently smtp.mac.com), as they are all gray'd out and cannot be changed. I would like to update these settings to smpt.me.com. Is it necessary for me to delete this account in order to update the settings? That seems rather lame.

What did not work? You could not add an additional SMTP server? It does not matter what the primary is listed as....turn it off. Then turn on the additional server you added.
Better yet remove your .mac account and add it back as .me account.
.Mac to MobileMe transition FAQ
http://support.apple.com/kb/HT1932
Message was edited by: iphone3Gguy

I changed my password on my aol account but it did not change on the SMTP server which is preventing me from answering email. Help

I changed my aol password but the SMTP server password did not change so I can't send mail. How can I change the SMTP password?

Go into Settings > Mail, Contacts, Calendars and select the account, then tap the account on the popup that you should get, and then tap on the SMTP server name

Crystal Reports: How to change Oracle OLE DB server at runtime

Post Author: dvlasman
CA Forum: Data Connectivity and SQL
I'm using a rpt made with Crystal Reports 8.0.1 and VB 6. The report was made using the Microsoft OLE DB provider for Oracle. What I want to do is change to Oracle server / database the report is connecting to at run time before the report is displayed. I am using the Crystal Report Engine 8 Object Library (cpeaut32.dll), not the ocx.After creating the report object:Dim CrystalReport As CRPEAuto.ReportI open my report and discard saved data:'Open The ReportSet CrystalReport = CrystalApplication.OpenReport(msReportSource)CrystalReport.DiscardSavedDataConst sDBServer = "ORCL.SERVER" 'My TNS name for the Oracle ServerConst sDatabase = "ORCL.SERVER" 'I'm not sure what this value should beConst sUID = "system"Const sPwd = "manager"I was then going to change the database connection one of two ways:1:Dim objDatabaseTable As CRPEAuto.DatabaseTableFor Each objDatabaseTable In CrystalReport.Database.Tables Call objDatabaseTable.SetLogOnInfo(sDBServer, sDATABASE, sUID, sPWD) If (Not objDatabaseTable.TestConnectivity) Then Debug.Print "Database failed connection: " & objDatabaseTable.Name End IfNextSet objDatabaseTable = Nothing2:call crystalapplication.LogOnServer("pdsoledb.dll","MSDAORA.1",sDATABASE,sUID,sPWD)Neither of these two way gets me a successful connection. What am I doing wrong, and which is the preferred method to use?ThanksDean

Did you get a resolution to your problem? I cannot dynamically change the datasource location in .NET using CR XI via OLE DB for Oracle. I get "This field name is not known." messages and when I try using the set datasource location in the designer tool, the mapping dialog box comes up with no fields in the right box. Thanks, Brian

Why did my iPhone (not PCs) suddenly require a change in POP/SMTP server spec's for one (only one) of my email accounts?

Hello! Why has my (iPhone only) POP and SMTP settings suddenly changed for one (oddly only one) of my email sub-accounts? -It changed from "incoming.verizon.net" and "outgoing.verizon.net" to pop.verizon.net and smtp.verizon.net, respectively, ALL BY ITSELF!?
For example, I have had two verizon email accounts on my iPhone for some time, each originally set up with the default "incoming.verizon.net" and "outgoing.verizon.net" for receive/sending email. Suddenly, without my changing anything in my settings, my "[account-1]" account would not work via iPhone (yet still worked via desktop PC)- it was not until I completely deleted the "[account-1]" account from my iPhone and recreated it that it would work, HOWEVER, iPhone AUTO-creation process for this POP account settings now picked up "pop.verizon.net" and smtp.verizon.net" instead of the previous standard "incoming.verizon.net" and "outgoing.verizon.net" settings. (Yet "incoming.verizon.net" and "outgoing.verizon.net" is still necessary for all other verizon accounts, as well as for my "[account-1]" on desktop PCs) Has someone, for example, affected (illegally...?) a redirection of my "[account-1]" mail through other servers...? NOTE: ALL my acocunts have been using the incoming 995 and outgoing 465 ports for some time without problems until this issue started a couple days ago.

Hello! Why has my (iPhone only) POP and SMTP settings suddenly changed for one (oddly only one) of my email sub-accounts? -It changed from "incoming.verizon.net" and "outgoing.verizon.net" to pop.verizon.net and smtp.verizon.net, respectively, ALL BY ITSELF!?
For example, I have had two verizon email accounts on my iPhone for some time, each originally set up with the default "incoming.verizon.net" and "outgoing.verizon.net" for receive/sending email. Suddenly, without my changing anything in my settings, my "[account-1]" account would not work via iPhone (yet still worked via desktop PC)- it was not until I completely deleted the "[account-1]" account from my iPhone and recreated it that it would work, HOWEVER, iPhone AUTO-creation process for this POP account settings now picked up "pop.verizon.net" and smtp.verizon.net" instead of the previous standard "incoming.verizon.net" and "outgoing.verizon.net" settings. (Yet "incoming.verizon.net" and "outgoing.verizon.net" is still necessary for all other verizon accounts, as well as for my "[account-1]" on desktop PCs) Has someone, for example, affected (illegally...?) a redirection of my "[account-1]" mail through other servers...? NOTE: ALL my acocunts have been using the incoming 995 and outgoing 465 ports for some time without problems until this issue started a couple days ago.

HT1349 How do I change my iCloud SMTP server info

How do I edit my iCloud on my phone

Settings > Mail, Contacts, Calendars > iCloud account > Account > Mail > SMTP

How do i change primary smtp server?

How do I change my primary smtp server? I can delete all the old accounts I no longer use as email accounts, but the primary smtp server for the accounts I still use is still set as that for the old server. Not only is there nowhere to delete it, I can't even change it! There should at least be a button to take you to that page in the iOS6 settings somewhere easy to find, like IN the same place as where it is listed.
Very annoying.

What did not work? You could not add an additional SMTP server? It does not matter what the primary is listed as....turn it off. Then turn on the additional server you added.
Better yet remove your .mac account and add it back as .me account.
.Mac to MobileMe transition FAQ
http://support.apple.com/kb/HT1932
Message was edited by: iphone3Gguy

TS3899 how do i change the password on my primary smtp server

i had to change my email password,
now my primary smtp server password needs changed.
I can read it but not change it or edit it.
how do I change my primary smtp server password

Delete the account and add it back.

Editing primary SMTP server crashes settings

I just set up my mom with her new iPhone and used a backup from a previous iphone. I have to set the password for the SMTP server for her email account but when I try to set it and click "Done" it crashes the Settings app every time. I cannot change anything within the primary SMTP server settings and get it to save because every time I hit "Done" it crashes. I can successfully add additional SMTP servers, and have set up one with the correct settings and have it turned on, but it doesn't work because the server is the same server specified in the primary.
How can I delete/change the primary SMTP server without it crashing?
All help is appreciated.

This probably means that your mail app data are corrupted. First, try resetting the phone by holding the HOME and SLEEP buttons until an Apple logo appears. The try to change the setting again. If it still fails, delete the Verizon account, Reset the phone again, and add the account back.

APEX Oracle 11g HTTP Server - Cannot get SSL working

I have installed APEX on Oracle 11g with the Oracle HTTP Server on MS Windows server.
Data base up and running, APEX up an running.
All works as expected on port 7777
When I try 4443 I get error message re self signed certificate by Oracle, but if I click through error message I get an https connection.
I want to replace default cert with a locally signed cert, and get SSL working on 4443, then switch to port 443.
I have used the Oracle Wallet manager, generated a CSR, had this signed by my corproate CA, and installed the corporate CA cert and the newly signed server cert into the wallet (with Auto Login Set) and saved it in:
D:\orahttp\Oracle_WT1\instances\apex\config\OHS\ohs1\keystores\infosec2wallet
This creates two files: ewallet.p12 and cwallet.sso
I then manually add the group/users "SYSTEM" and "Administrators" to these two files to match the security tab on the default wallet.
I T then go to the ssl.conf file located at:
D:\orahttp\Oracle_WT\instances\apex\config\OHS\ohs1\ssl.conf
and changed the entry:
#SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/default"
SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/infosec2wallet"
I then stop and start the Oracle HTTP Server - ohs1 from the start menu.
Then I try to connect from my desk top machine using the following URL:
https://us-pghinfosec2.ariba.com:4443/pls/apex/f?p=101:1:
I get the clasic MS IE Message:
==========
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Diagnose Connection Problems
More information
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.
For offline users
You can still view subscribed feeds and some recently viewed webpages.
To view subscribed feeds
Click the Favorites Center button , click Feeds, and then click the feed you want to view.
To view recently visited webpages (might not work on all pages)
Click Tools , and then click Work Offline.
Click the Favorites Center button , click History, and then click the page you want to view.
==========
I am at a loss as to what to do. It acts like Oracle HTTP can not open my wallet.
I suspect it needs the password to the wallet but I cannot find any place to specify the password, and Auto Login should have addressed that issue.
Any insights welcome.
Thanks - Elton Hay

Hello Lakshmi,
>
I got your point but in our case HTTP Server and Oracle Database (APEX) running on different machines.
Oracle HTTP Server running on a Windows 2003 server and Oracle Database running on Sun Solaris machine.
So do i need to change Oracle 10g HTTP Server? do i need to install Oracle 11g HTTP SErver?
Please let me know if my question is not clear.
>
<ul><li>
I got your point but in our case HTTP Server and Oracle Database (APEX) running on different machines.Did I missed something?
You should have mentioned this additional information in the original question itself.
</li>
<li>Oracle HTTP Server running on a Windows 2003 server and Oracle Database running on Sun Solaris machine.As long as [url http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/otn_install.htm#BHAFJJDA]dads.conf is configured correctly there should not be a problem with this.
From Original question:
We are having Oracle APEX 3.1 version on Oracle 10g Database and Oracle 10g HTTP Server as web server in our organization.How did this setup of APEX worked?(i.e. on different machines)
If you still have doubt about this you can do the setup and find out before upgrading.
</li>
<li>So do i need to change Oracle 10g HTTP Server? do i need to install Oracle 11g HTTP SErver?This question is answered in the above post. As long as you fulfill the [url http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/pre_require.htm#CFHIIJBE]HTTP Server Requirements for APEX 4.2 (Also we are discussing this long about only Oracle 10g HTTP Server but which version?)
</li></ul>
Hope now I am more clear!
Regards,
Kiran

Where(How to change the SMTP- Server

Hello,
i'm using the OAS 10.1.2.0.2
While installation OAS i entered the name of the actual working SMTP- Server.
Sending mails worked fine until today.
Now the name of the SMTP- Server has changed and i wanted to change it(the name) in the Application Server, but i didn't find one/all place(s) where i had to change the name(s) of the SMTP- Server.
Is there anyone who can help me??
Thanks a lot.
Best regards.
Florian

Refer this:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/reconfig.htm#sthref681
Thanks
Shail

Changing SMTP server

hi
I'd like to change SMTP server for Oracle Files.
during Oracle Files Configuration, I think I've written a worng SMTP server
where can i change it?
thanks in advance

hi Naqi Mirza
thanks for the reply.
by the way, I've checked teh eb web site
http://hostname:1810 files domain.
but I couldn't find SMTP configuration page.
can you give me more information for that, please?
I really appreciate it.

How to setup the SMTP server in Oracle apps?

Hi,
How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
Thanks,
Bijoy
Edited by: user12070886 on Feb 6, 2013 4:26 AM
Edited by: user12070886 on Feb 6, 2013 4:27 AM

How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? No, it is not mandatory. Also please note that the mails are sent out from concurrent manager mode. Not from the database node.
Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
>
It depends on the operating system you are using. If you are using *nix then sendmail needs to be configured.
Thanks

Changing Oracle XE SMTP server.

Similar Messages

Maybe you are looking for