Changing Orientation in Reports 3.0....
Hi All
Is it possible to have a single report printing a potrait and a
landscape orientation
for different pages in the report ?
Well, I have a report to printing atleast 9 pages per record
selected in the main driving
query of which , 4 have to be in Potrait and the rest in
Landscape orientation .Is it possible to
change the orientation in the between pages trigger ? I have no
clue ..Please help
I am using Reports 3.0
Thanx
Regards
Raghavendra
null
Hi Denz,
Want to know if you got any progress on the nwbc logo? I am trying the samething here but didn't get any progress on it.
Thanks
Jacky
Similar Messages
-
We are using a rtf template to generate a report and want the change the orientation to Landscape , changing the orientation of the template is not workling.
Has anybody done this using XML code
There is some property called reference-orientation but we are not sure how to use it.
Please help.Hi Kavipriya
Thanks for your reply.
Yes, we tried to change the page layout of RTF template to landscape. We thought that this would reflect in report output as well.
Detailed Requirement: We are generating report in excel (.xls) format. When client is printing this excel report file, by default it takes orientation as portrait while printing. Client want the generated report should be in Landscape format so that they can give directly print command without changing orientation in print setup.
So we are trying to make report output in landscape format. But don’t know how to achieve that.
We thought of changing layout in RTF template would help us but no use.
It would be very great help if you could guide on us. Thanks in advance. -
How to schedule the webi report based on data changes in the report data
Hello,
I want to schedule a webi report based on data change in a column in the report.
The scenario is something like below:
1. If a data of a particular column changes from 2 to 3 than I would like to schedule this report and sent it to users mail box.
I know how to apply alerts or schedule a report or data tracking for capturing changes in the report but I dont know how to schedule the report only for data changes.
Anybody done this before.
Thanks
GauravHi,
May be these links can help you:
http://devnet.magicsoftware.com/en/library?book=en/iBOLT/&page=SAP_R_3_Master_Data_Distribution_Defining_Change_Pointers.htm
SEM-BCS: Load from data stream schedule
Attribute Change Run -
My ipod touch 3 generation willnot change orientation for any apps except movie apps. I purchased this One from a friend and my previous Ipod touch changed with no problem. The orientation lock is not on either...., has anyone had a similar experience??? I just dont know what to do... Thank you!!!
Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Reg: how to change layout in report writer
HI all,
how to change layout in report painter?
regards
JK RaoHi everybody,
I have a report painter using transaction ke30 and I want to change the header layout.
Now it looks like that
|_________|_________|
But i want to add another header row above this row, so it will look like:
|_________________________|
|___________|_____________|
Does anyone know the answer?
Thanks a lot for your response
Edited by: Vo Duy Pho on May 24, 2010 10:29 AM
Edited by: Vo Duy Pho on May 24, 2010 10:37 AM -
How to track personal details changes in the report without using triggers on the database tables
Hi There,
I'm having a requirement to track the oracle HRMS Personal details changes in the report not using the triggers.
ex: if some changes the address of the person, then that changed values should be populated in the report.
Please find below query:
If any of the following columns data is updated, the new value should be populated in the report.
SELECT PAPF.PERSON_ID PAPF_PERSON_ID
, PAPF.EMPLOYEE_NUMBER EMPLOYEE_NUMBER
, PAPF.FIRST_NAME FIRST_NAME
, PAPF.LAST_NAME LAST_NAME
, TO_CHAR(PAPF.DATE_OF_BIRTH ,'DD-MON-YYYY') DATE_OF_BIRTH
, ADDR.ADDRESS_LINE1 ADDRESS_1
, ADDR.ADDRESS_LINE2 ADDRESS_2
, ADDR.ADDRESS_LINE3 ADDRESS_3
, ADDR.TOWN_OR_CITY TOWN
, ADDR.REGION_1 COUNTY
, ADDR.POSTAL_CODE POST_CODE
, ADDR.COUNTRY COUNTRY
, PAY.PAYROLL_NAME PAYROLL_NAME
, PLN_TYP.NAME PLAN_TYP
, PLN.NAME PRODUCT_NAME
, BOF.NAME COVERAGE
FROM PER_ALL_PEOPLE_F PAPF
, PER_ALL_ASSIGNMENTS_F PAF
, PER_ADDRESSES ADDR
, PAY_PAYROLLS_F PAY
, BEN_PRTT_ENRT_RSLT_F PEN
, BEN_PL_TYP_F PLN_TYP
, BEN_PL_F PLN
, BEN_OIPL_F BOIPF
, BEN_OPT_F BOF
WHERE 1 = 1
AND PAPF.PERSON_ID = PAF.PERSON_ID
AND TRUNC(SYSDATE) BETWEEN PAPF.EFFECTIVE_START_DATE AND PAPF.EFFECTIVE_END_DATE
AND TRUNC(SYSDATE) BETWEEN PAF.EFFECTIVE_START_DATE AND PAF.EFFECTIVE_END_DATE
AND PAPF.PERSON_ID = ADDR.PERSON_ID
AND ADDR.PRIMARY_FLAG = 'Y'
AND ADDR.DATE_TO IS NULL
AND PAF.PAYROLL_ID = PAY.PAYROLL_ID(+)
AND PEN.PERSON_ID = PAPF.PERSON_ID
AND PEN.BUSINESS_GROUP_ID = PAPF.BUSINESS_GROUP_ID
AND TRUNC(SYSDATE) BETWEEN TRUNC(PEN.EFFECTIVE_START_DATE) AND TRUNC(PEN.EFFECTIVE_END_DATE)
AND PEN.PRTT_ENRT_RSLT_STAT_CD IS NULL
AND PEN.SSPNDD_FLAG = 'N'
AND ( PEN.ENRT_CVG_THRU_DT >= TRUNC(SYSDATE)
OR PEN.ENRT_OVRIDN_FLAG = 'Y')
AND EXISTS(SELECT PIL.PER_IN_LER_ID
FROM BEN_PER_IN_LER PIL
WHERE PIL.PER_IN_LER_ID = PEN.PER_IN_LER_ID
AND PIL.BUSINESS_GROUP_ID = PEN.BUSINESS_GROUP_ID
AND PIL.PER_IN_LER_STAT_CD NOT IN ('VOIDD','BCKDT'))
AND PEN.PL_TYP_ID = PLN_TYP.PL_TYP_ID
AND TRUNC(SYSDATE) BETWEEN PLN_TYP.EFFECTIVE_START_DATE AND PLN_TYP.EFFECTIVE_END_DATE
AND PLN_TYP.PL_TYP_ID = PLN.PL_TYP_ID
AND TRUNC(SYSDATE) BETWEEN PLN.EFFECTIVE_START_DATE AND PLN.EFFECTIVE_END_DATE
AND PLN.PL_ID = PEN.PL_ID
AND PEN.OIPL_ID = BOIPF.OIPL_ID(+)
AND TRUNC(SYSDATE) BETWEEN NVL(BOIPF.EFFECTIVE_START_DATE,HR_GENERAL.START_OF_TIME) AND NVL(BOIPF.EFFECTIVE_END_DATE,HR_GENERAL.END_OF_TIME)
AND BOIPF.OPT_ID = BOF.OPT_ID(+)
AND TRUNC(SYSDATE) BETWEEN NVL(BOF.EFFECTIVE_START_DATE,HR_GENERAL.START_OF_TIME) AND NVL(BOF.EFFECTIVE_END_DATE,HR_GENERAL.END_OF_TIME)
AND (:P_SYSDATE) BETWEEN TRUNC(PEN.ENRT_CVG_STRT_DT) AND TRUNC(PEN.ENRT_CVG_THRU_DT)
AND (CASE WHEN :P_PAYROLL_ID IS NULL THEN 'Y' ELSE NVL((SELECT 'Y' FROM DUAL WHERE PAY.PAYROLL_ID = :P_PAYROLL_ID), 'N') END) = 'Y'
AND PAPF.LAST_UPDATE_DATE = (:P_SYSDATE) ;
--AND PAPF.LAST_UPDATE_DATE BETWEEN to_date(:P_SYSDATE) and (to_date(:p_sysdate) + INTERVAL '31' Day);
--AND (:P_SYSDATE) = PAPF.LAST_UPDATE_DATE ;
Thankscheck this -
Re: Best Event-Based notifications for Sox Complience? -
Changing a custom report to be time sensitive
Hi
I posted this in FI too thought the MM people might have some inputs as to how to correct the Zvenclass if we use the standard SAP field on the accounting view table LFB1 MINDK minority indicator
We need to change the custom report zvenclass, it is a report that tells us the amount spent for each vendor in a specific class. I have the date/time sensistive information for the amount spent but not the change in vendor class from the vendor master. I need this to be date driven too. As in if a vendor is a small business in 2005 and you change the vendor to be a large vendor in 2011. Then I want the report for dates and values in 2008 to show small business and the dates and values in 2011 to show large business.
The assignment is not time dependent, it has to be manually changed.
I did see through the CDHDR and CDPOS tables, but could not pinpoint to the changes in the valuation classes.
Is there any other way if I can find whether I can find the changes?
Now I did review the values from the custom tables, here I find that there is a difference in the sum totals of the postings when I add up the individual years compared to the consolidated report (for ex: 200720082009 is not equal to 2007 to 2009) so am I right in assuming that the system does account for the changes. Any other help in this regard would be appreciated.
Any inputs on this will be appreciated.
ThanksWe are trying to solve this by altering the code for the report.
Will update if it works though. -
Unable to rename or save changes to Access Reports Access 2010
Unable to rename or save changes to access reports in Access 2010
This just started
Tried changing report name, rename is allowed but does not save
If change made to report does not save
If trying to save as new report name error given saying name conflicts
Queries and tables work fine
Database file resides on server and this happens on all PCs, tried local copy to local machine and that has same problem, compact and repair completes but still same problem
Any help welcomedIs the setup 1 Back end on the server, and 1 each Front end on each PC?
peter n roth - http://PNR1.com, Maybe some useful stuff -
Changes in Crystal reports are not reflecting after publishing
Dear SDN Mates,
We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
Can anyone please help me on this.
Thanks and Regards
Arun SHello Prathamesh,
After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
This is happening for all reports. Can you please suggest me on this.
Thanks and regards
Arun S -
Changing datasource of reports in a loop only works for first report.
Hi,
I have code that loops through a list of reports to change the datasource and save the change in the report. The idea is that this can be done at build time so time taken at runtime is only for opening the report and running it.
The problem is that the first iteration of the loop works, and any further ones don't. Apart from closing the client document is there anything else that should be explicitly closed? I don't retrieve any ReportSource from the Client Document so I shouldn't need to dispose of that...I don't think. In particular is there something that should be done to the databaseController retrieved from the clientDoc after each loop?
The code goes like the below:
for(File report : reports){
System.out.println("Preparing report: " + report.getAbsolutePath());
ReportClientDocument clientDoc = CRJavaHelper.getReportClientDocument(
report.getAbsolutePath());
CRJavaHelper.replaceDBConnection(clientDoc, props);
clientDoc.close();
System.out.println("Report " + report.getAbsolutePath() + " prepared.");
getReportClientDocument does this:
ReportClientDocument clientDoc = new ReportClientDocument();
clientDoc.setReportAppServer("inproc:jrc");
clientDoc.open(fullPath,
OpenReportOptions.openAsReadOnly.value());
return clientDoc;
replaceDBConnection does the following:
DatabaseController dc = clientDoc.getDatabaseController();
logonDataSource(dc, username, password);
prepareReport(dc, schema);
ConnectionInfos cis = dc.getConnectionInfos(null);
for (IConnectionInfo oldci : cis) {
IConnectionInfo newci = new ConnectionInfo();
newci.setKind(ConnectionInfoKind.SQL);
newci.setAttributes(propBag);
newci.setUserName(username);
newci.setPassword(password);
dc.replaceConnection(oldci, newci, null, DBOptions._useDefault
+ DBOptions._doNotVerifyDB);
SubreportController src = clientDoc.getSubreportController();
IStrings strs = src.getSubreportNames();
Iterator<?> it = strs.iterator();
while (it.hasNext()) {
String name = (String) it.next();
ISubreportClientDocument subreport = src.getSubreport(name);
DatabaseController sdc = subreport.getDatabaseController();
cis = sdc.getConnectionInfos(null);
for (IConnectionInfo oldci : cis) {
IConnectionInfo newci = new ConnectionInfo();
newci.setAttributes(new PropertyBag(propBag));
newci.setUserName(username);
newci.setPassword(password);
sdc.replaceConnection(oldci, newci, null, DBOptions._useDefault
+ DBOptions._doNotVerifyDB);
clientDoc.save();What's the URL for the site where you are using this? Offhand, it looks like it should work with your first example so you are either placing the script before those elements are loaded or you might try wrapping your current javascript inside the:
$(document).ready(function() {
--- your existing javascript here
This make sure the code runs once all the html is loaded on the page. Without seeing a URL and debugging with the js console in Chrome I can't give you a solid answer.
But, I do know that you can probably do this with a lot less markup. Once we figure out what the actual problem is I have a better solution mocked up for you on jsfiddle.
When looking at my HTML code on jsfiddle, please realize I setup some dummy HTML and removed your tags and added actual values which would be output by your tags. The main thing I did was remove the whole div.more-selection and instead, added a "data-is-selected" attribute on your div.more-option element. Then, in my javascript for each div.my-option element on the page, we loop through them, find the value of that data attribute and hide that div if it's less than 1 (or 0).
Here's the fiddle for you to look at: http://jsfiddle.net/thetrickster/Mfmdu/
You'll see in the end result that only two divs show up, both of those divs have data-is-selected="1".
You can try pasting the javascript code near the closing </body> tag on your page and make sure to wrap my js inside a <script> tag, obviously. My way is neater on the markup side. If you can't get it to work it's likely a jquery conflict issue. My version is using the $(document).ready() method to make sure all the code is loaded before it runs.
Best,
Chris -
1099M - 2008 Legal changes for 1099 Reporting
Hello experts,
I have been using program RFW1099M via Sapscript form to generate the 1099M. Based on note 1279366 on 2008 legal changes for 1099 reporting, sap provided the 1099MISC form in Smartforms.
I don't use Smartforms. Is there any sap 1099M program provided using Smartforms ?
The sapscript form i currently have looks the same as the 2008 1099Misc. So I don't know why i have to use Smartforms. Pls let me know what you think ?
Thanks
JoyceQuestion is closed.
-
Change the HTML Report format the same as TestStand 2010 SP1 in TestStand 2012
I have a lot of test steps (~10K) that gets executed and the indentations on HTML report format in TestStand 2012 gets too deep. I have to slide the horizontal bar to the right to see the report when l'm in the middle. I did not have this issue in TestStand 2010 SP1.
Is ther a way to change the HTML Report format (style) the same as TestStand 2010 SP1 in TestStand 2012?dexrays:
We are currently investigating this issue. In order to help us with the investigation could you post a sequence file and configuration that reproduce the problem? The configuration file is located in C:\ProgramData\National Instruments\TestStand 2012\Cfg\ModelPlugins\ResultProcessing.cfg for Windows Vista / Windows 7 or you can use the Cfg link in the TestStand 2012 installation directory.
You can use the Legacy Model Switcher (included in TestStand 2012) to use the legacy models instead of the new models. The legacy models are more backward compatible, however, this also means that you will not be able to use the improvements in the new models (for example, the new plug-in architecture). If this is acceptable then you can use the legacy model switcher to switch to the legacy models. The Legacy Model Switcher is located in the Start Menu under Programs->National Instruments->TestStand 2012->Tools->Compatibility. For more information on Legacy Model Switcher please read the online help.
Thanks for your report and for your help with diagnosing this issue.
- Francisco -
How to change layout of report S_ALR_87012083?
Hi everybody,
How to change layout of report S_ALR_87012083 except change output control at selection screen ?
For example,I need a list that there have vendor no. at every line of open item,and I don't need Total liabilities for every vendor.
Thanks a lot for any help.Hi yu liang,
You can find vendor list having Vendor No. & without showing total liability for every vendor.
after executing the report,
1.You need to select "change layout (ctrl+F8)",
a small window comes, it has two part -> column content & hidden fields.
then u select "Vendor" from hidden field & move it to column content.
2. at column content there is a column named "Total". u need to remove check for your column name "amount".
now select "copy" button or enter. u will find the req. report.
u can save it also by ur name.
hope its helpful to u.......
plz, reward points as a way of thanks if helpful... -
Books not updating for changes to financial reports
I have made some changes to financial reports which are contained in existing books. I have run the reports individually and the changes are correctly reflected. However, if I open the book containing the report it still shows the report as it existed before the changes. I have even deleted and re-added the relevant report into the book and it still makes no difference.
Regards
KatieUntil and otherwise if anyone else has a suggestion,I would say apply the latest FR patch
Patch 13024655: Patch Set Update: 11.1.1.3.519 for Oracle Hyperion Reporting and Analysis Financial Reporting
And if still the issue persist,then open a Ticket with Oracle support for further troubleshooting. -
How to make changes on Aging report of XLR
Dear All,
Our customer has a Aging XLR in SAP2005. However, after we upgrade them to SAP2007, the report cannot work properly. It looks like we have to make some changes on the report. Could anybody can let me know how to add a filter
JDT1.BalDueDeb > 0
I click line9 (the report data line), in the advanced report builder window (Row tab) >> Selections >> transaction row >> Dimension lookup >> List Tab >> Selection >> Attribute >> , I have some columns name but I cannot see JDT1.BalDueDeb
Then I go the advanced report builder window (Report Default tab) >> Selections >> transaction row >> Dimension lookup >> List Tab >> Selection >> Attribute >> , I have some columns name but I cannot see JDT1.BalDueDeb
Thanks a lot.
Regards,
Yuka
Edited by: Jie Jin on Mar 5, 2010 7:01 PMin my Complete Selection window I have the following:
FACT TTY( * ) FIG( RefDate <= CurrentDate And JDT1_BalDueDeb + JDT1_BalDueCred <> 0 ) Group By TTY.Code ,FIG.Ref1 ,FIG.OJDT_Ref2 ,FIG.LineMemo ,FIG.RefDate
in the XLS cells I have the following:
=ixGet("JDT1_BalDueDeb")
and
=ixGet("JDT1_BalDueCred")
If you need additional clarification let me know.
regards, Sotos Soteriou
Maybe you are looking for
-
PDF ATTACHMENTS ONLY SHOWING FIRST PAGE in email since upgrading..
to iPhone 4 and iOS 4. Anyone else experiencing this? Any ideas? HELP! Message was edited by: adream8
-
Patchadd interrupted - now failing to install patch correctly
I had started a patch installation when one of my kind users compromised the system by filling all available swapspace. I tried tto get into the system but failed. After about 10 minutes I did - what I should have avoided to do - a control C on the u
-
How get current time zone offset ?
Hi, I am facing to a problem related getting time zone offset. Below code is used for my application : NSDate* sourceDate = [NSDate date]; NSTimeZone* destinationTimeZone = [NSTimeZone systemTimeZone]; timeZoneOffset = [destinationTimeZone secondsFro
-
HT4790 What's the point if anyone can log into Recovery HD?
What happens if I use Command-R and use the Recovery HD to log into the machine and erase (format) everything? Can this scenario actually happen? I mean, the Recovery HD won't ask for a password, so it would be pretty simple to lose everything or am
-
'Adobe Lens Profile Creator, SONY-SRF-Files in DNG konvertieren leider nicht möglich'
Hallo Nach einigen Tagen und vielen Versuchen habe ich nun festgestellt, dass SONY SRF-Files von älteren Kameras, wie z.B DSC-F828 (Sony Raw-Datei) mit keinem der von Adobe angebotenen Programme sauber in benutzbare DNG-Files für den "Adobe Lens Prof