Changing page height

I go to Layout, sometimes it works, other times, it doesn't make the change.  I'm using version 3.04.  Thanks!

You shoulf be able to adjust the page height in the inspector tab:
The other thing that can work it is a text box in the body portion of your page just move it down the page to expand.

Similar Messages

  • Page height not changing and yes, I've checked for hidden objects

    Hi
    has anyone got any advice? I'm tearing my hair out!
    I cant seem to change all my websites page heights despite checking that there are no hidden items
    best wishes Helen

    Hello,
    Please go in the page in design mode. Select "Show all on Page" and "Unlock all on Page" from Object Menu.
    You may find some unwanted elements near the footer of the page. Deleting them will fix the problem. If it do help then please share the muse file with us so that we can take a look at it.
    Regards
    Vivek

  • Control the page height and page width of pdf report using pasta_pdf.cfg

    Hi All,
    I've followed the note: 338990.1 (how to print publisher PDF reports via the concurrent manager) in metalink to print a PDF REPORT. Everything work fine except the page height and page width is used as default (8X11). Is there anyway that i can custom page height and page width size such as: legal (8.5X14).
    current set up in pasta_pdf.cfg
    [DEFAULT]
    %% ============== Preprocessing Command ==================== %%
    % Pasta can use a preprocessing command to invoke any executable
    % that supports an input file and an output file (a filter program).
    % You can use redirection. Pasta will invoke the filter program
    % to preprocess the Pasta output before passing it to the printing
    % command. By using the preprocess option, you can generate output
    % formats other than the formats Pasta currently supports. For
    % example, you can generate PCL output.
    % You can use {infile} and {outfile} in this option.
    % {infile} is the output file generated by Pasta. You can use
    % it as input for the preprocessing command. It is a temporary
    % file and will be deleted after being passed to the
    % preprocessing command. {outfile} is the output file generated
    % by the preprocessing command. Pasta names it temporarily and
    % it will be deleted after being passed to the printing command.
    % If you want to keep it, you can name it by using the '-o'
    % command line option. Pasta will copy {outfile} to the file you
    % specify.
    % Preprocess for PDF output
    % This is an example for PDF output to print.
    ; Xpdf
    preprocess=/usr/local/bin/pdftops {infile} {outfile}
    ; Ghost Script
    ; preprocess=pdf2ps {infile} {outfile}
    ; Acrobat
    ; preprocess=acroread -toPostScript -pairs {infile} {outfile}
    %% ============== Printing Command ========================= %%
    % You can specify the printing command and options you want
    % to use to print your report. Pasta will pass the final output
    % to this command. {printername} will be replaced by the
    % actual printer name passed through the command line option
    % (-pn), so in most cases you don't have to change these
    % options.
    % for UNIX platform
    printCommand=lp -c -d{printername}
    % for Windows platform
    ntPrintCommand=print /D:{printername}
    %% ============== Error Log File =========================== %%
    % This tells Pasta to create a log file. The default error
    % output is stderr.
    ;errorlogfile=pasta.log
    NOTE: pasta version 3.0.4
    form server 6.0.8.27.0
    third party tool is pdftops
    Thanks
    Kevin

    i think that can be down from the printing direver/styles/prt files when you added the printer at your apps system check the follwoign for more info.
    ( How to Implement Printing for Oracle Applications: Getting Started )
    Note:269129.1
    (Step By Step Guide to Set Up a Printer in Oracle Applications)
    ( Note:60936.1)
    fadi
    http://oracle-magic.blogspot.com

  • Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

    Hi,
    Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
    documents that have a page width greater than its page height.
    In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
    In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
    Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
    This behaviour causes printing problems: the page prints out 90° rotated.
    I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
    Word 2010 seems to force the page orientation settings.
    Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
    This is very annoying, since we have to print official documents of a municipality (driver's licences).
    Is there a workaround for this issue?
    Regards,
    Laurent Grandgaignage
    Sysadmin Gemeentebestuur Stabroek, Belgium

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, we can follow these steps to test this issue
    Step 1: Repair Office 2010
    1.      
    Click
    Start, and then click Control Panel.
    2.      
    Click
    Programs and Features.
    3.      
    Click the
    Office 2010 program that you want to repair, and then click
    Change.
    4.      
    Click
    Repair, and then click Continue. You might need to restart your computer after the repair is complete.
    Step 2:
    Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
    Windows Vista and Windows 7
    a)      
    Exit Word 2010
    b)      
    Click
    Start.
    c)       
    In the
    Start Search box, type the following text, and then press
    ENTER:
    1.      
    %userprofile%\appdata\roaming\microsoft\templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    Microsoft Windows XP
    a)      
    Exit Word 2010
    b)      
    Click
    Start, and then click Run.
    c)       
    In the
    Open box, type the following text, and then press ENTER:
    %userprofile%\Application Data\Microsoft\Templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    f)       
    Close Windows Explorer.
    How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
    http://support.microsoft.com/kb/826845
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Introduce left/top margin: Change Page Size ignored

    I have a vector drawing of a technical schematic in PDF.  The drawing is an extract of a much larger schematic, so it is very small: 2.2" by 1.648".  However, when I print it out, it is resized to fill up a Letter size paper (8.5" by 11") and the size is then perfect for viewing.  Also, the PDF has no white space around the edges, so the same PDF is perfect for importing into documentation packages.
    However, for hard copy printing, depending on the exact aspect ratio of the drawing, I will sometimes want to introduce white space along one edge for hole-punching purposes.  I am opening the PDF and printing it from Acrobat 8 Professional.  I cannot use Document->Cropping because I am trying to introduce a margin rather reduce an existing margin.  I tried using the Change Page Size controls in the cropping dialog panel.  Originally, it was set to Fixed Sizes and Page Sizes was set to None.  I selected Custom instead of Fixed Sizes, then I entered in the Width and Height in inches, with the Height being about 0.5" more than the original 1.648" (it's landscape, so the holes will be at the top).  However, the illustrative diagram does not change, and neither do the dimensions shown on it.  I click OK and the PDF as viewed did not change -- no white space.  When I go back into the Change Paper Size dialog, all the size data that I entered is gone and the control have reverted back to Fixed Size with a Page Size of None.  I explored the dropdown list for Page Sizes, and none of them are appropriate for such a small diagram.
    What I'm trying to achieve is a pretty simple effect, and I thought it would be straightforward.  It has to be *very* simple as I expect to do this regularly.  Is there actually a way?  Ideally, it doesn't involve calculating all sorts of bounding boxes and offsets.  Who knows what the assumed reference points for those are.  In fact, the most direct way would be to enter a negative Margin Controls in the Crop Margins region of the dialog.  That is not possible, of course.

    Actually, I found a way.  The reason why the page size was being ignored is because the numbers were too small.  If I enter a big enough number, it sticks.  It would be nice to get a message to that effect though.......sigh.
    I can then adjust the cropping margins to get the gutter.
    Thanks.

  • I need to change the height of a Captivate playbar using Flash Pro

    I need to change the height of a playbar in Adobe Captivate.  I have Flash Pro. I am very new to Flash Pro. I read.. "To change the height of the playbar, adjust the height of pbcBk_mc movie clip inside cpPlaybar symbol in Library".  The problem is I CAN'T FIND pbcBk_mc anywhere.  I see the cpPlaybar attrbute.  When I click on it and look at the timeline I am not seeing an attribute for pbcBk_mc or height.  Where in the world is it??

    You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
    You master the "static" content..
    You keep this authoring file and have a backup of this file.
    You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
    The authoring file  and output PDF (with form fields) gives you "rev 00".
    Now, you must change something in the "static" content.
    Open the authoring file and save as to a new version (e.g., "wordfile_v00"  becomes "wordfile_v01).
    Output this to "pdffile_v01".
    Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
    Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
    This replaces the "static" PDF page content and does not affect the form fields on the page.
    (you may have to adjust position of form fields)
    Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
    Be well...

  • Changing Content Height

    Does anyone know if iWeb version 1.1.2 has a bug in the Page Inspector - specifically, with the field for setting Content Height? It's the easiest, most bone-headed thing in the world to do but, and I even checked the Help files to make sure I was doing it exactly as I'm supposed to, but the values will not change, no matter what I do or how many times I press Return. I'm an experienced designer and coder so I don't think it's due to plain incompetence... I sure hope not. Am I overlooking something obvious? Does iWeb place limits on page height, but not make that information known or visible? Help... and thanks. Sorry that was long-winded.

    ad-hoc wrote:
    Does iWeb place limits on page height...?
    Welcome to the discussions. Yes — see this old thread:
    http://discussions.apple.com/message.jspa?messageID=8080901

  • Different page heights

    I have a website whose pages are pretty much the same height, however, I have 3 pages that are considerably longer than the others.  It uses an accordion spry that has about 15 tabbed panels.  When I expand some of the content areas of the spry panels, the lower panels extend below the footer.  I want to change the page height of just those pages that use the accordion spry to make it larger.

    You shouldn't be expressing height values on any containers with text in them.  Height is determined by content and that varies by page and the text-size people use in their browsers.   Explicit height values actually limit how much content your containers can hold which can be very bad for usability reasons.   If you need to reveal a background image, use the min-height property instead of height.
    Nancy O.

  • FOOTER IS NOT MOVING AS I ADJUST PAGE HEIGHT

    I MEAN THE FOOTER NOT MOVING CORRESPONDING TO A NEW CHANGE IN HEIGHT.IF I CHANGE THE HEIGHT THE FOOTER STILL STAYS IN MIDDLE.IT IS NOT MOVING AUTOMATICALLY AS I SAW IN THE TUTORIAL.PLEASE HELP.

    Hello DATHU1983,
    Are you referring to the section "Design the Visit page?"  If so, can you tell me what time in the video you start having problems?  Is it at the beginning of the video when the presenter goes into the Page Properties and adjusts the height of the page?
    Thank you for any additional detail.  Also, I want to confirm that you are using the Muse CC version and not a previous version of Muse?
    Thank you,
    Ed Sullivan

  • Decreasing Page Height

    I have the following page where I'm trying to reduce the height of the page so that it fits perfectly around a border that I'm using it. However, I'm having trouble figuring out how to do this. I'm trying to change the height in page properties but that's not working, and I'm manually trying to guide the bottom page guide but it's stick. Is there a minimum page height for a broswer that needs to be reached and that's why this isn't working? Or is there a way I can accomplish this? I basically just want the background to fit the whole page and want to avoid enlarging it because then it will get skewed. ANy help would be appreciated thanks.

    The footer are always extend unedr your contents (unless you set your content as a footer item).
    To do what you are looking for, you must place your image into a MASTER page, not a regular page like the Home (as I can see from the screenshot you provided).
    You can also try to set your image as background fill for the page.

  • Changing the Height of Top Level Navigation

    How do I change the height of the Top Level Navigation?  I went into the framework page I am using, and then opened the Top Level Navigation iView, and changed the Fixed Height to "100" pixels while leaving the Height Type as "Fixed", but this had no affect.
    I am using just one level of TLN, and trying to increase the height of that one level so it is easier to see in the page.
    Thanks,
    Owen

    I have already downloaded the PAR file and customized it, and am using it in my custom portal framework.  Which part of the code do you recommend I modify?  There is the portalapp.xml file, which specifies the height as 45 pixels, but this is just the default size, which should be overridden by the value I specify in the iview, right?
    As far as the theme editor, that doesn't help me.  I have to increase the size of the top level navigation, not just change the font.
    Thanks,
    Owen

  • ORA-06502 on "Help Text" region when changing pages on a tabular form

    Hello everybody,
    We are developing an application on Apex 4.1.0.00.32. This application have some pages with tabular forms and these pages uses a page zero as template. In this page zero, we have added two sidebar regions: a list region to navigate on the application and a help text to describe how to use our application.
    The problem occurs when the tabular split the records into pages (since it has more records that it can show on a single page). When the user clicks to change to another page, Apex raises an ORA-06502: PL/SQL: numeric or value error as described below:
    Erro ao renderizar a região "Ajuda". ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
    Informações Técnicas (visível somente para desenvolvedores)
    is_internal_error: true
    apex_error_code: APEX.REGION.UNHANDLED_ERROR
    ora_sqlcode: -6502
    ora_sqlerrm: ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
    component.type: APEX_APPLICATION_PAGE_REGIONS
    component.id: 2
    component.name: Ajuda
    error_backtrace:
    ORA-06512: em "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654
    ORA-06512: em "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204
    Obs: Our database is in Brazilian Portuguese, so I guess it will be hard for some people to understand the first two lines! :)
    We have tried to change the pagination style of the tabular form and change the region model of the help text but the problem still happens.
    Does anyone an ideia about what this may be?
    Thanks in advance!

    I am getting the exact same message, to the line number, also in APEX 4.1.0.0.32.
    Occurs when changing pages in a classic report, Standard region template, select list pagination, when selecting a different pagination set.
    In English:
    Error during rendering of region "Matched Participants Help & Hints".
    ORA-06502: PL/SQL: numeric or value error: character to number conversion error
    Technical Info (only visible for developers)
    is_internal_error: true
    apex_error_code: APEX.REGION.UNHANDLED_ERROR
    ora_sqlcode: -6502
    ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error
    component.type: APEX_APPLICATION_PAGE_REGIONS
    component.id: 2
    component.name: <strong>Matched Participants</strong> Help & Hints
    error_backtrace:
    ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654
    ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204
    There are no conditions on the region, and no date string within the Help text. Some HTML <strong> tags, that's it.
    The Help region renders fine the first time.
    The Debug info does not help any:
    3.798360.00062Computation point: After Box Body4
    0
    3.798990.00081Processes - point: AFTER_BOX_BODY4
    0
    3.799790.00068Region: <strong>Matched Participants</strong> Help & Hints4
    0
    3.800470.00213Region rendered dynamically because request was not null4
    0
    3.802590.00096Add error onto error stack4
    0
    3.803550.00084...Error data:4
    0
    3.804400.00084......message: Error during rendering of region "<strong>Matched Participants</strong> Help & Hints".4
    0
    3.805240.00084......additional_info: ORA-06502: PL/SQL: numeric or value error: character to number conversion error4
    0
    3.806080.00081......display_location: ON_ERROR_PAGE4
    0
    3.806890.00081......is_internal_error: true4
    0
    3.807700.00084......apex_error_code: APEX.REGION.UNHANDLED_ERROR4
    0
    3.808540.00082......ora_sqlcode: -65024
    0
    3.809350.00234......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error4
    0
    3.811700.00082......error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654 ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204 4
    0
    3.812510.00081......component.type: APEX_APPLICATION_PAGE_REGIONS4
    0
    3.813310.00110......component.id: 24
    0
    3.814420.00099......component.name: <strong>Matched Participants</strong> Help & Hints4
    0
    3.815400.00076...Show Error on Error Page4
    0
    3.816160.00344......Performing rollback4
    0
    3.819610.00225Processes - point: AFTER_ERROR_HEADER4
    0
    3.821850.00268Processes - point: BEFORE_ERROR_FOOTER4
    0
    3.82453-End Page Rendering
    Any thoughts on where to poke around for this one?
    Thanks - Karen

  • How do I change page order on a document created in Pages 5.1?

    After reading some of the posts about the lack of ability to change page order in Pages 5.1, I decided to re-install Pages 09 from the DVD that came with my computer because some posts said it was a better program. After inserting the disc and responding to all the prompts it seemed to download everything but I can't find Pages 09, I only seem to have 5.1.
    I will take a solution to either problem, but all I really want to do is change the order of 2 pages on a 9 page document created using 5.1.

    It is in your Applications/iWork folder.
    Make sure you update it to the latest v4.3:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=f793ea2968cc 7f8ffa338ab5171d1d5d&mforum=iworktipsntrick
    Peter

  • How can I manually change the height of the "Type ...

    Hi all
    Just got automatically installed the latest 6.22 version of skype few minutes ago and I got a few questions. 
    First and foremost, how can I MANUALLY change the height of the textbox, where I type the messages. I would like to make it larger, like in the previous versions of skype. I don't want to move my mouse cursor through the entire monitor to reach this tiny textbox.
    And second, why you guys are trying constanly to ruin something that is working perfectly ? Going to revert to the previous version until you fix all these nuisances.
    Regards

    There is no way to do this, it is designed to be strictly landscape with keyboard, portrait without - not the best thought-out phone on the market, mainly geared towards compulsive texters and e-mailers.
    There's no way to know whetherNokia will change this with any future updates, perhaps you should make the recommendation to them directly using the 'contact us' link.

  • Printing only changed pages

    In my department, we produce large technical manuals that are distributed to users around the world.  When small changes are made to the manuals, we only distribute the changed pages (including the back side of the changed page since the documents are printed double-sided).  Is there an automated way to only print the changed pages with the necessary back pages?

    Rick Quatro at http://www.frameexpert.com has a plugin that will print only changed pages; I don't see it listed on his website at the moment, but if you contact him he'll be able to give you more details.
    Rick's very, very familiar with the complications of dealing with changed pages in FM.

Maybe you are looking for