Changing Paper type in Reports 2.5

Hi,
Can we define type of paper in report? I want to set the paper to A4 instead of Letter.
Thanks a lot in advance.
Warm Regards
Vivek Bajaj

Hi,
Thanks for the reply.
I've already defined the paper size as 11" x 8.5 " which is the size of A4 paper. first problem is that when I open the page setup page, neither the orientation is set to landscape (I've coded :orientation := 'Landscape'; in Before Parameter Form Trigger) nor the page is displayed as A4. Although when I print the report the printer prints in Landscape mode but the report is not properly aligned. If I manually select A4 paper instead of Letter the alignment is much much better. As far as I can remember, in 6i or even 6 and 5 versions of D2K, changing these properties usually changes the settings in the page setup page.
Any Suggestions??
Thanks in Advance.
Warm Regards
vivek Bajaj

Similar Messages

  • Change paper type in QM03

    Hi,
    any one can please suggest how can I change paper type in the notification. its by default set to letter format. I want to change it to A4 size for a particular user. is there any way I can do this?

    Hi Bhanukishor,
    Try to set the default printer setting in your PCs --> Start --> Devices and Printers --> Right click on default printer --> Printing preferences --> Go on Tab Paper --> Changes the Print on = A4.
    I think it will resolved your problem.
    Sandip

  • How to change paper types

    I don;t seem to be able to change paper types using Pages 09,in Word I think I am right in saying you can change from various paper types in the print section. When I try this in Pages I do not get this option, I need to be able to print onto various Photo papers etc. Can YOU help.

    I assume that you get the "bare" Print dialog :
    If I am right, click the small black triangle pointed by the yellow arrow to get the 'complete' Print dialog.
    Yvan KOENIG (VALLAURIS, France) mardi 12 juillet 2011 14:46:04
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Cannot change paper type from Android ePrint app when printing photos

    I have the ePrint mobile app installed on my Android phone (Samsung Galaxy S4) and have a Photosmart 7520 printer at home. When I'm at home, I can see the same printer listed twice from ePrint mobile app on my phone, once via ePrint (with the printer's email address shown) and the other via wireless (with the printer's IP address shown). If I were to print a photo from ePrint mobile app, if I select my printer via wireless connection, I can see the option to change the paper type, i.e. either the plain paper or photo paper; but if I select the same printer via ePrint, the option to change paper type no longer appears in the app. When I'm on the go, I can only see my printer via ePrint and I cannot print a photo on plain paper due to the absence of the "paper type" option. However, if I were to print a document via ePrint mobile app, the option to change paper type does show up. So to sum it up: 1) Print photo from ePrint mobile app via wireless -- the "paper type" option is present;2) Print photo from ePrint mobile app via ePrint -- the "paper type" option is absent;2) Print document from ePrint mobile app via ePrint -- the "paper type" option is present. This cannot be by design, correct? Thanks.  

    Hi phibei!
    Thank you for posting.
    I have done some research on your post.
    You are correct, this is by design. This is due to the communication method being used. When using the ePrint app via ePrint it's sending the information via an email and limits the options available.
    Happytohelp01

  • Color laserjet 2605dn changing paper type does not make the change at printer

    I've had this printer for 2 years and have had this problem from time to time. This time I have not been able to find a cure. I'm running Win 7, 64 bit and the printer is on wired network.
    When I change the paper type in the driver page to photo paper, the printer should slow the paper feed to allow for extra thickness. It doesn't, but I can change the speed by using the printer control panel to set it to photo paper (a bit of a pain since the printer is in a different room and it must be switched back to plain paper the same way when done).
    I downloaded and installed the latest drivers (version 5.1.0.1), but this didn't help. The printer is still useable, but very inconvenient to use, so any help would be appreciated.
    Thanks for any assistance you can provide.
    Don

    Look's like there are 3 different Universal  print drivers (UPD) on the site.  PCL6, PS and PCL5.   I recommend testing the PCL5 driver if you haven't as yet.   It is bizarre that this happens from time to time, but you cannot get it going again using teh same methods.  Don't know if you have swapped out the network cable to see if that makes any difference.  You can also try installing via USB to see if the problem continues in that type of connection, then run the network install again. 
    Is it critical that the unit slow down for this particular paper thickness?  Have you noticed any print quality issues by leaving it unchanged?
    Good luck.
    Though I work for HP, My posts express MY opinion, and not those of HP.

  • Trouble changing paper type for printing

    I downloaded Photoshop Elements 11 to a new computer (with much more memory and speed that old computer) but now Photoshop does not work as well. When I  try to change the paper type for printing, the setting is stuck at "plain paper" and there are no other options available. Any ideas on how I can fix this problem?

    It sounds like a printer driver issue, not a PS issue. Can you update your printer driver on the new computer?

  • HP Deskjet 2645: how to change paper type while photo copying

    Currently use a HP Deskjet 2645. I used to be able to photo copy and change the paper type to either legal or 5x11. Now, when I try to photo copy a document, the only options are the three that's all A4. How can I fix the settings to be able to have the options I want back?

    hi docmy printer is always plug directly into a wall outleti did the resetbut the result still samebellow is the sample i tried     ori doc                                                                                                 photocopy doc 

  • Change paper type (A4) via JavaScript

    Hi all,
    I want to change the paper type via Java Script to A4.
    The hierarchy:
    data  -->pageSet -->page1 (A4)
    Is this the right syntax, if I want ot switch the page1 to A4? ...and which "Event" should I use? --->initialize?
    data::initialize - (JavaScript, both) 
    xfa.data.pageSet.page1.medium.stock = "A4";

    Hi
    Are you trying to change the size on the fly for different values for instance.
    Or is this simply ensureing the page is formatted correctly when the document is opened?
    I could not get your code to work
    but this code appears to work OK
    xfa.form.form1.pageSet.pageArea.medium.stock = "A4";
    Hope this helps
    Graham Spaull
    DubDubDubDesigns.co.uk

  • How to Change Paper Type Using Java script

    HI ,
    We have a requirement , in which we have to change the paper type i.e. "A2" , "A3","A4" etc.  while printing using a JavaScript. I have written a code like this :
    xfa.form.form1.pageSet.Page1.medium.stock = "A2"; But this is not working. please help me out.
    Thanks,
    Bhaskar.

    That's the right object for choosing the page size at Design time. What event are you doing this on? Although you can change it in the form model, the form's page size is already determined from the template by the time you have a form to script against, so although you can change it via script after the fact in XFA, I don't believe it will have any impact. Even putting it on the layout ready event does not work.

  • Epson 3880 cannot change paper types in Acrobat Print dialog

    I use Adobe Acrobat as a RIP to print from on my Epson 3880. It looks like I might have to reconstruct all my printer presets since they've disappeared after the upgrade(?) to Yosemite 10.10.3. However the print dialog in Acrobat Pro X no longer allows me to create presets with different paper types. At least I haven't found it anywhere. Is this something that can be worked around or is this an "enhancement" to the new OS?
    Should I just give up and go back to Snow Leopard?

    Thanks a lot. Although i find it strange that every application sets this up individually. However, I did this in all Applications that I use for printing, now it works just fine.

  • How to edit/change data type on report that was selected by mistake

    Hello there
    I created a report in APEX and one column is giving error because the data type of one column supposed to be a varchar2 but somehow the report was created with a Date data type. I want to change the data type without recreating the whote report. Can someone help? I tried to edit the report but couldn't be able to figure out.
    HELP....

    I found a solution for this, thank you.

  • Change detector failed while scanning for changes to type User

    I'm receiving lots of system log warnings in IdM.
    These warnings are not bound to any particular action in IdM, they just do appear while IdM is on.
    Almost one warning per one second.
    Change detector failed while scanning for changes to type Server
    Change detector failed while scanning for changes to type UserForm
    Change detector failed while scanning for changes to type User
    Change detector failed while scanning for changes to type Resource
    SysLog detail:
    Timestamp 123
    Event
    Server server11
    Severity Warning
    Component Repository
    Error Code OCDT00
    Message Change detector failed while scanning for changes to type User
    Reported cause java.lang.NullPointerException
    java.lang.NullPointerException
    at com.waveset.repository.ObjectChange.equals(ObjectChange.java:112)
    at java.util.HashMap.eq(HashMap.java:299)
    at java.util.HashMap.containsKey(HashMap.java:381)
    at java.util.HashSet.contains(HashSet.java:182)
    at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.dispatchChanges(ObjectChangeManager.java:398)
    at com.waveset.repository.ObjectChangeManager$RemoteChangeDetector.run(ObjectChangeManager.java:314)
    at java.util.TimerThread.mainLoop(Timer.java:512)
    at java.util.TimerThread.run(Timer.java:462)

    same here, just deployed 8.1 with oracle as db. It results in syslog table growing into 10+G and still growing.
    wonder if there are others who are seeing this.
    my "syslog -d 1" output looks like this...
    2009-12-02 04:52:55.972 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Account
    2009-12-02 04:53:06.400 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Server
    2009-12-02 04:53:06.578 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type User
    2009-12-02 04:53:06.914 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Account
    2009-12-02 04:53:17.479 null W xxx RP OCDT00 Change
    detector failed while scanning for changes to type Server
    C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.18\webapps\ims\bin
    lh syslog -d 1

  • Where did the media type (paper type) controls go?

    I am running a Mac Book Pro with OSX 10.7.3 Lion.  My question pertains to color management in Photoshop CS5.  Where do I put my .icc file (Pro38 WCRW) for Photoshop’s use as a media type?  And where in the Photoshop CS5 print process does it give me the ability to change paper types (.icc files), etc?

    try this
    http://www.gballard.net/photoshop/epson/cs5/#workflow

  • Can we change font size and font type in reports

    Hi All Technical/Functional Masters,
    We are developing some transactional reports in ISU. this report has 20 columns to be printed. On screen, display is not a problem but client has a requirement to download this report in PDF format and wants to print on A4-paper in Landscape. Although we have managed to accommodate all the columns on A4 paper but have to compromise with font size that are very small and not visible. If we download the report in excel format we are able to maintain the font size 8 and accommodate all columns after little format but same in PDF is a problem.
    Can anyone tell whether we can increase the font size and change font type(from SAP standard to 'Arial') before sending the output in PDF ? Is there any property or utility that can be changed or used for this purpose.

    Function Module : CONVERT_ABAPSPOOLJOB_2_PDF
    Include : THSTXWFPL
      for modify font size
    decrease fontsze foncharacter will increase
    fontsize = 120.     <-- Change
    fontsize = 100.  or fontsize = 80
    Depend on your logon lang. My case logon 'TH' or 2.  I modified font ZCORDIA (refer CordiaNEW thai font)
    if is_cascading is initial.
      case language.
      when '0'. "Serbian
        font = 'COURCYR'.  devtype = 'SAPWIN'.
      when '1'. "simpl.Chinese
        font = 'CNHEI'.    devtype = 'CNSAPWIN'. cjklang = 'X'.
      when '2'. "Thai
      font = 'THDRAFT'.  devtype = 'THPDF'.
       font = 'ZCORDIA'.  devtype = 'ZMTHSWNU'.
        font = 'THANGSAN'.  devtype = 'ZPDFUC'.
      when '3'. "Korean
        font = 'KPSAMMUL'. devtype = 'KPSAPWIN'. cjklang = 'X'.
      when '4'. "Romanian
        font = 'COURIER'.  devtype = 'I2SWIN'.
      when '5'. "Slovenian
        font = 'COURIER'.  devtype = 'I2SWIN'.
      when '6'. "Croatian
        font = 'COURIER'.  devtype = 'I2SWIN'.
      when '8'. "Ukranian
        font = 'COURCYR'.  devtype = 'SAPWIN'.
    Add font Cordia Thai
    SE73 --> Fon familia --> ZCORDIA
    Load Font Cordia thai to system
    SE38 --> RSTXPDF2UC
    load CORDIA.TTF
    SE73 --> printer font --> 'ZMTHSWNU'
    Add ZCORDIA font and copy AFM Metric from = 'THDRAFT'.  devtype = 'THPDF'.
    Modify AFM
    example
    *----- OLD--
    StartFontMetrics 2.0
    sapFamily ZCORDIA
    sapHeight 000
    sapBold false
    sapItalic false
    StartCharMetrics 0183
    WX 0500 ; N space                          ;
    WX 0500 ; N exclam                         ;
    WX 0500 ; N quotedbl                       ;
    WX 0500 ; N numbersign                     ;
    WX 0500 ; N dollar                         ;
    WX 0500 ; N percent                        ;
    WX 0500 ; N ampersand                      ;
    *--NEW--
    StartFontMetrics 2.0
    sapFamily ZCORDIA
    sapHeight 000
    sapBold false
    sapItalic false
    StartCharMetrics 0183
    WX 0375 ; N space                          ;
    WX 0375 ; N exclam                         ;
    WX 0375 ; N quotedbl                       ;
    WX 0375 ; N numbersign                     ;
    WX 0375 ; N dollar                         ;
    WX 0375 ; N percent                        ;
    WX 0375 ; N ampersand                      ;
    Result : decrease space between character.   Then Your PDF will have BIGGER FONT.
    Rdgs,
    Suwatchai

  • How to change the paper type in printer settings?

    Does anyone know how to change the paper type in printer settings?  I'm trying to have the ability to change it to photo paper from Photoshop Elements.  I can't find the option in printer settings or through Elements.  I'm assuming I could save an additional printer setting for photo printing, but can't find how to even select a different paper type.
    thanks!

    It would help to know which OS you are running as the answer will be different if it's Lion or the previous OS's. You are not running iOS 5.0.1 on your MacBook Pro so provide the correct information.

Maybe you are looking for