Changing Parameter Settings in the NWA - MobileEngine.Config
Hi All,
When I make changes in settings for a certain Parameterset in the
Netweaver Administrator (NWA), not all value's of the parametersetting
s are changed in de MobileEngine.Config after a sync.
Middleware SP18
MobileClient: MI2.5 SP18 Patch 1
Which settings are changing and which are not and what is the reason of
this?
Steps for the Reconstruction
As an example I tested this for the timezone setting.
I changed the value of the timezone setting in the NWA. After a sync
this setting was NOT changed in MobileEngine.Config on the mobile
device.
If I do this for the setting:MI.Sync.ProtocolVersion the value changes
after a modification in the NWA and after a sync on the mobile device.
Once you have made the changes are you stopping and restarting the Mobile Engine for the settings to take effect?
Some settings need the Java engine to be restarted, where as some don't.
This might be why some take effect and others don't.
On further investigation, Mobile Infrastructure is integrated into NW2004s.
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000652422&_SCENARIO=01100035870000000112&_OBJECT=011000358700006520072006E
Similar Messages
-
How do I change default settings in the author field when I edit or insert a comment in a PDF?
How do I change default settings in the author field when I edit or insert a comment in a PDF?
Generally it gets this info from the Identity in the preferences. Unfortunately, I know of no way to change the Login Name that shows up in the comments. I need to look at newer versions of Acrobat on other machines, this is AA8.
-
I wrongly changed the settings on the apps page to the American store. Now I cannot download any updates because I am locked out and need to revert back to the Canadian store, how do I do that
Try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Canada.
-
WRT54G v8: Unable to change some settings via the browser interface
I have a WRT54G V8 router which I'm trying to set up as a wireless access point.
I purchased it some time ago and flashed the firmware to version 8.00.2. I see there
is a newer firmware version available, and I'm going to try flashing that to see if it
helps, but wanted to ask here first.
The problem is that when I connect to the router using a web browser, I can see
the administration pages, and even change most settings, but some settings
just snap back to their previous values.
For example, I go to Setup -> Advanced Routing, and change Operating Mode
from Gateway to Router. When I do, I see it changes to Router, then I see it
talking to the HTTP server, and then it changes back to Gateway.
This also happens in other areas, like trying to enable MAC address filtering -
it won't let me enable it, and the Security Mode setting (under Wireless -> Wireless
Security) - It won't let me select WPA2 Personal, among others.
Note that I've had this router for a while, but decided to change how it was configured
today, so I started by pressing and holding the reset button for >5sec to reset it to
factory defaults and went from there.
I'm assuming there must be some settings which are preventing these from taking,
but I can't imagine any setting which should prevent me from enabling the MAC
address filtering.
Just in case this matters, I have the router connected to my in-home network using
one of the 4 Ethernet ports, and don't have anything plugged into the Internet port.
Also, I have turned off the DHCP server, and assigned a static IP address to the
router. This is the IP I'm using to connect to the router's administrative pages via
a browser running on one of the other PCs on my in-home network.
The wireless access point is working, in that I can connect to my in-home network
with my wireless client (laptop).
Can anyone help me understand what I'm doing wrong?
Thanks,Thanks, Yes, I did reset the router. Just to clarify:
- I was having the problem where making changes to some settings would cause the settings to revert back to the original settings. In fact, the settings would switch back before I would have a chance to click on the Save Settings button. Clicking on the button after the settings changed back, of course, saved the original setting. For example, I would click on a drop-down control to change a setting, see the browser communicate with the HTTP server, then the drop-down would just snap back to the original value. It wouldn't allow me to change it to a different value.
- I reset the router, including holding the reset button for >5 seconds to force a full-reset. This didn't help.
- I attempted to update the firmware with the latest version for my router (yes, I double-checked that I had the correct version for my router/version). This failed with a strange message and required that I do another reset of the router.
It was after this failed attempt at the update that the problem went away. Now, I am able to change these particular settings and the changes stick.
At this point, I updated the firmware to the latest version and it worked. After this, I am still able to make all the necessary setting changes and the router is performing as I need.
Thanks for all the help, -
Changing parameter HOSTIP on the sybase source
Hi,
I faced a problem when the dns name and also ip address of the sybase source database changed.
According to the instruction I changed parameter HOST as
avsybdb alter_source -srcname sybase1 HOST=newhost
and it was succesfully changed, but ip address of the source remains the same as for old hostname,
Command
avsybdb alter_source -srcname sybase1 HOSTIP=newhostip
exits with error - unknown parameter HOSTIP.
Is the only way to change ip address is to drop source and to add new one?
Best Regards
VladHi Vlad:
I would really recommend that you upgrade to 10.2.3 Patch Set 2 (version 10.2.3.2.0), if you've not already done so. In addition, please make it a point to stay on the latest bundle patch for Audit Vault (currently at Bundle Patch 2 - bug 9958865). If your issue has not been addressed by one of these patches, and since the product is not behaving as documented, please log an SR with Oracle Support. -
i already tried resetting me phone settings and nothing changed. i also reconnected my router and still nothing. im running out of options and i need help
Dear allan
Thank you so much for your replying
Please tell me what do you mean with
(or send the unlock request to Apple on the owner's behalf. The unlocking is done with a restore with iTunes.)
And how i can do it????
If there is a link to this please write it to me
And it will be highly appreciated
Thanks again
But please help me urgently -
How do you change network settings at the command line when they were set in the
Ubuntu server setup in a remote location awhile ago, with GUI packages. Currently at
version 14.04 LTS. There is ssh access to the remote server.
After a lot of digging thru typical command line configs and not finding the existing
settings anywhere, it appears the only way to update existing settings -- DNS
name servers, IP's, etc. -- is using a GUI method, such as gsettings or unity-control-center.
However,
gsettings doesn't appear to have those particular items.
Is
the only option to use a remote version of Unity .... or just get someone
on-site and remedy this thru the GUI?
This topic first appeared in the Spiceworks CommunityHi and thanks for your reply,
I used one mini DV Tape for my footage and captured the whole thing into CS6 in one go and so the capture should have been the same throught all of the film. Once I had edited the tape on to the timeline some of the clips are 16.9 widescreen and others are 4.3 standard.
Help!!!!! -
Has Verizon changed email settings for the iPhone?
Hi-
have an iPhone with iOS6 installed. Haven't changed a thing for quite a while, but it stopped receiving Verizon/Yahoo emails yesterday (using the built-in Mail app). Did Verizon change something on the email settings? My emails are coming into my home computer so my password is correct and active.
thanksI've been wracking my brain over this for a few days and I finally found the solution. Before it was enough to just use your username to access your email account, but since Yahoo's outage you apparently need to add "@verizon.net" to the end of your username for it to work. I was going crazy because I quadruple checked my port and SSL settings on my phone like all the other forum posts suggest. All my settings lined up with what they should ave been but still wouldn't work. On a whim, a final desperate try before I deleted the account from my phone, I added the "@verizon.net" after my username, and the !#@%# thing worked! Give it a try. It certainly won't make it work any LESS.
-
Changing power settings from the battery indicator
i was wandering how to get the setting where you can change the battery settings (better energy savings, normal, better performance, custom) from the battery indicator at the top in the menu bar.
i could do this before where i would click on the battery indicator, under the drop down menu, i could click on any one of then options. but now those options are not there. i can only change the settings by going into system preferences.
cheers.dammit! any way to get that feature back?
-
How Do I Change Trackpad Settings on the "Windows" Side of the MBA?
Happy to report that I succesfully installed Windows XP on my MBA SSD. However, I can't seem to find the options in Windows XP to change the trackpad settings (e.g., click with touch, speed, etc.). I see mouse, keyboard, etc. settings but no touch/track pad. Any direction would be much appreciated.
Thanks in advance!My understanding is there is no hardware driver written for windows side for the hardware in the MBA. I wish there was, I love my MBA - but I use it primarily as a windows XP machine.
-
How to change language settings on the latest version of pages?
How can I change languages in Pages?
It should do it automatically but otherwise just select select the text:
Menu > Edit > Spelling & Grammar > Show Spelling & Grammar > Automatic by language > change to your prefered language
Peter -
How do I change nation settings in the iTunes Store?
hi all,
i live in italy and during a holiday in spain i've bought a new i pod touch.
now i'm back at home and want to upgrade the system software to a new release.
my problem is that when i connect to itunes store all pages i get are in spanish language and when i try to buy something all settings are for spanish and so i cannot complete anything.
note that language setting on my ipod touch is italian.
can anybody help me.
thanks a lot
aleeIn the iTunes store make sure you are on the home page. Scroll all the way down to the bottom of the page. On the very bottom all the way to the right you will see Spain’s county flag. Click on that flag and then select yours.
-
How do I change nation settings in the iBooks Store on my iPad?
As a native English speaker living in Holland I would prefer to be able to go the UK iBooks Store on my iPad. How do I get it to change from the Dutch language store to the UK one by default?
You can only use the store in the country where your iTunes account is based - so if you are in the Netherlands you can only use the Dutch stores. To be able to use the UK store you would need a valid address in the UK and be in the UK when purchasing. Have you tried other ebook apps/stores ?
-
How to change podcast settings in the Application options dialog
I have attempted to subscribe to an RSS feed for a podcast - URL is http://www.abc.net.au/triplej/kingsmill/rss/podcast.xml
I am being prompted to join using live bookmarks. As i use Google reader, there is no option available to change it to google. Hitting the dropdown arrow, my choices are live bookmarks or Microsoft Outlook - or browse for application. How do i change / remove the applications entry for RSS so i can start over and select Google as a default
The Options / Application / Podcast - has the RSS logo - says "preview in firefox"Apple does not make what you are asking straightforward for a reason: the user usually sets the system language to the one they prefer anyway.
If you think you have a good reason for setting the language in the application itself, I would suggest using the pathForResource:ofType:inDirectory:forLocalization: method of the main bundle to get the applicable strings file and then deserialize it into a dictionary as if it were a plist (strings files actually are). -
I'm not able to view pictures in gmail. Where the picture should be is a outline and a small blue square in the middle with a question mark. How do I fix that so I can see my pictures?
Try going to Mail/Preferences, Viewing, make sure display remote images in HTML messages box is checked.
Maybe you are looking for
-
Radio Button or Check Box Group
Hi, I built a form based on a query. There is a flag column, only one of queried records is allowed to be "Y" in this column. The rests must be null. Most ideal thing is to have a radio button group, only one of them can be selected. Another way is t
-
How do I get another copy of Mountain Lion...already purchased one
I bought an update for the 27" iMac....put it on a USB drive, and somewhere between the 2 desk lost it. I am trying to update the MacBook Pro. Still have confirmation codes but every attempt to find just the download ask for another $19.99 Thanks
-
Hi, What means this logs that I could see in the SCE8000?. 2011-05-13 10:34:14 | INFO | CPU #000 | trap:line attack log is full phyIndex: 1 type: 5 severity: 3 2011-05-13 10:34:14 | INFO | CPU #000 | trap:line attack log is not full phyIndex: 1
-
JFrame add and remove panel repaint issues
I'm not really sure what is wrong with the code. I have tried different things. What I am trying to do is to remove a panel and then add a different panel that contains a table into a frame, so the frame displays the table panel instead of the origin
-
Why is my battery health decreasing so rapidly????
I bought a new one like 3 weeks ago .. it has 10 cycles and the battery health has decreased from 98% to 95% in these last few days .. I usually have it connected to Ac power and discharge it like every 4 days.. thats the 10 cycles .. why would the h