Changing Path to Archive

Hello.
We're using GW 8.0.3 HP1. In our Branchoffice we have several users, who uses their Client in Online-Mode (I know that is bad...).
The Archive Path is on BO-Server. When the user starting archiving their messages, the VPN-tunnels load goes up to max. value.
The BO user have access to our HQs network via Citrix XenApp.
For one user I find out that the archive-path is set to BO's servers. It is possible to have the same path in the HQ.
Can I got the Archive from the BO to HQ server without any problems? I know that moving an archive is a little tricky.
Thanks in advance for your answers.
Best regards from Hannover, Germany
Dirk Emmermacher

Hi Dirk,
In ConsoleOne you can set, and lock, the archive path for the users. You can do this at PO level or per individual user. It's under Client Options | Environment | etc.
As long as the archive is not in use, you can simply copy it to the new location. If it's in use you could end up with corruption.
Greetings from South Africa :)
Cheers,

Similar Messages

Invalid Parent Path in Archive

Secure Access V2.0 returned an error when I tried to open my vault. After I type in the password I get the error message, "Invalid Parent Path In Archive". When I click 'OK' I get the standard "4 Ways To Protect Your Data" screen as usual when I open a vault. When I click the 'Next" button I get the error, "This vault could not be loaded, it may be located on another computer or the original vault file has been manually removed." After I click OK the main screen opens. It has the vault listed, but if I click on it I get the same error message. Whats going on? How can I access my vault? It is my backup for important documents and archives. No, I haven't moved or deleted the vault. The vault is located on the memory stick.I only work from one computer running Windows 7. This particular Sandisk 32 Extreme is never used with any other computer. I haven't changed the password. Everything was working fine until I just couldn't sign in.

Hello, There are some steps you can try in order to recover the vault files . 1) copy the vault and secure access application from the write protected drive over to the new drive2) run secure access on the new drive3) when it prompts to create a new vault go ahead and create a new vault with the exact same password as the old vault4) encrypt any file in the new vault (this will generate two new system files)5) close secure access6) open the vault folder on the new drive via windows explorer, navigate to the system files folder, you should see several files, among them are two sets of "USB Flash Drive-XXXXXXXXXXXXXXX.idx and .bak files7) Looking at the date stamps of the files, 2 will be older and 2 will be newer (you can also check on the old write protected drive to confirm the names of the older files, the older files contain the encryption information needed however the file name is associated with the previous drive we will need to rename the old files)8) copy the 2 newer files and paste them into any temporary location outside of the flash drive (i.e.. desktop)8) once you've copied the two new files to a temporary location delete the originals from the system files folder on the flash drive.9) go to the temporary location and copy only the file name from the .idx file (the file name, not the file itself)10) go to the vault / system files and rename the old .idx file with the name you copied from the new .idx file11) repeat the same for the idx.bak file12) now you should have renamed the old .idx and .idx.bak files with the names of the newly generated system files.

How to change path for Ev4Excel.xla

Dear All,
I'm trying to execute predefined BPF - custom menu (ProcessFunctions.xls). Whenever if click e.g. on Back, forward, open a file following similar message is being prompted:
Macro 'E:\Program Files\BPC\Ev4Excel.xla'!'EvMacroCall "OPENFILE","REPORTS\WIZARD\HotAnalysis\A01 Account Trend.xls","","","","","" can not be executed. Macro may not stated in this workbook or all macros can be deactivated.
Ev4Excel.xla is resided under path E\PC_MS.
How can I change path for macro call?
Or any other idea?
Regards,
Ender

i don't understand why do you have to change the path for Ev4Excel.xla?
Basically this the addin of BPC into excel. I mean it is the BPC excel client.
You are choosing the path when you are performing the installation of SAP BPC.
So Idon't understand why do you want to change the path?
If you want to do this you have to reinstall the BPC client and you have to choose the path wanted.
You error is not related to the path it is more related to rights.
I think you have to provide more details about the steps done and in what condition you observer this error.
Regards
Sorin Radulescu

[svn] 4267: Change path to Assets.swf in eclipse . project file from full hardcoded path to use the FLEX_SDK variable as the base path .

Revision: 4267
Author: [email protected]
Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008)
Log Message:
Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issue with Assets.swf not getting referenced correctly. If you import the framework project from Blazeds/trunk into Eclipse and get an error related to Assets.swf or that says "Unable to export SWC oem" for the time being try right clicking on the framwork project in Eclipse and selecting properties. Then in the properties panel, select Flex Library Build Path and then the Assets tab. On the Assets tab, check the check box next to Assets.swf and click Ok. This usually fixes the reference for me.
Modified Paths:
blazeds/trunk/development/eclipse/projects/flex/3.0/framework/.project

Revision: 4267
Author: [email protected]
Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008)
Log Message:
Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issue with Assets.swf not getting referenced correctly. If you import the framework project from Blazeds/trunk into Eclipse and get an error related to Assets.swf or that says "Unable to export SWC oem" for the time being try right clicking on the framwork project in Eclipse and selecting properties. Then in the properties panel, select Flex Library Build Path and then the Assets tab. On the Assets tab, check the check box next to Assets.swf and click Ok. This usually fixes the reference for me.
Modified Paths:
blazeds/trunk/development/eclipse/projects/flex/3.0/framework/.project

OAS 10.1 Apache/CGI how to change path env

I have a oracle application server 10.1.2 installed on windows enviroemnt ((W2K)
The %path% of the Windows contain a reference at a wrong perl interpreter and i remove it and restart oracle application.
The problem is that now %path% is correct but on Apache/cgi , a printenv.cgi perl script that write all the variable on $ENV show a path like old %path%
I make search on the oracle kit installation but not found nothing , only on regedit found a key HTTP_Server ->path with a path , i try to change it ,restrat the serve but not see any update on my cgi test.
Justo to summarize ,how i can change path variable that can have effect on CGI ?
Regards
Alessandro Lagostena
[email protected]

I'm coming to the realization that its not possible to do what I'm trying to do. Perhaps I need to configure the java runtime at the application server level rather than the OC4J instance level.
The only other alternative would be to run a standalone oc4j using 1.5, but I'd prefer to avoid this as we are already in configuration hell.
Once again any input/feedback appreciated!!

Dynamically change path to OLE file

I want to dynamically change the path of an OLE object that I am inserting into a report (word document). I am going through all the steps in the help but it is not working. I am on Crystal XI. Has anybody successfully done this?

Hi,
I have the same problem with Crystal 2008.
I have insert OLE object Insert -- Ole Object I search my file and click Collegamento, but if I modify the file in report I don't have a file changed, and if I change Path in a Picture Path I don't have change.
I see always the same file than I have import.
Sorry for my Inglish.
Please Help me.
Serena

Change default "create archive" from .zip to .sitx

Hi everyone.
This probably sounds like a crazy question (why on earth would I want to do this??). In any case, I'm in an office situation where we transfer files over a network and an outside office connects to our servers via FTP. As we transfer files, we've had to zip them in the past, but now we're having weird issues with the some of the larger files getting corrupted, so our IT guy has told us we need to start trying to stuff them instead. (We're a Mac-based company, so no PC issues here).
In any case, when I zipped the files in the past, I'd just do the handy right-click and select "Create Archive..." option from the menu.
Is there a way to change the Create Archive function to default to creating a sitx file instead of a zip file?
Our IT guy doesn't seem to know off hand. He's a busy person so I figured I'd try to do some research for him, and if there's a way to do it, I'd let him know how.
Really appreciate any help!

Just to add a bit to this: if you do get StuffIt Deluxe in order to have the Contextual Menu item available, BEWARE! The unpatched version of their menu will cause the Finder to crash when accessing the Contextual menu. There is a patch available on their web site. But the next system update may cause the problem to reappear.
Francine
Francine
Schwieder

Is new backup required after changing compatible and archive format?

Do we need to take backup after changing the archive format and compatible paramter.
Initially after upgrade from 9i to 10g, I was using 9.2.0. but to use 10g feature I want to change compatible parameter to 10.2.0, which requires the log_archive_format to contain %s %t and %r . So if I change the these two parameter, do I need fresh backup or the backup before changing these will be useful?
Thanks

Changing this parameter means oracle recoverer will be looking by default the current Archivelog dest/ Archive log format sequence file. If it is not successful in finding it where expected a dialog starts with the dba so he provides an alternate path/name where smon can find archivelog files.
As usual, before a major change, a backup is advisable.
~ Madrid.

StarSuite will not start up - help! Changed paths from one drive to another

Hi all,
I am using: StarSuite 8
On an: ASUS eePC 900
OS: Windows XP
This is my partner's computer. StarSuite 8 came with it the machine, but as yet she has not even gotten a chance to use it.
It has two hard drives:
C: drive is 4GB (with 500MG free), D: drive is 7.5GB (with 6.3GB free)
Windows, StarSuite 8, and everything else that came with the machine are all on the C: drive (the smaller one), which is why only 500MG are free (she has deleted everything else that wasn't an expensive program or the operating system; most of the 4GB is Windows XP as far as we can tell).
Previously, when she opened StarSuite 8 (swriter), when a new file would be opened, an error message appeared that said something along the lines of "Not enough disk space free" - i don't recall the exact wording.
As there where over 6 gigabytes free, we assumed the problem was that StarSuite 8 was somehow being dependant on the mostly used-up C: drive.
So i went into, i think,
Tools -> Options
...and found a section to change the paths for the folders that StarSuite 8 seemed to be saving to, drawing templates from, etc.
I found those folders on the C: drive, under "Documents and Settings", copied them (without making any changes at all), saved the copies to the D: drive, replicated the whole file path.
Then i went back to Tools -> Options and whatever that section is to change the paths. I edited them to point to the D drive rather than the C drive, to my newly created and copied-over files, the paths now looked something like this:
D:Documents and Setting/Kathryne/Application Data/StarSuite 8/User/ <all the various folders, copied exactly from it's equivalent on the C drive.
I thought if StarSuite 8 looked at the D drive instead of the C drive, it would stop bringing up the error message that kept claiming there was "insufficient disk space". The only thing i changed about any path was that the letter "C" became "D", and the default folder to which files are saved became "D:Documents and Setting/Kathryne" rather than "My Documents" (because My Documents is on the C: drive).
I then created and saved an swriter file, as a test to make sure everything was working, and it saved fine. I can still see the file sitting there under "D:Documents and Setting/Kathryne".
Anyway, my partner (Kathryne, as you can guess), just fired up her eePC, tried to open StarSuite 8 - and nothing happened. It will not open.
So she right-clicked on a .doc file, selected "Open With swriter", and it worked - the file was opened up.
But you can't do anything on it. When you hover the cursor over any of the menu buttons, it just turns into a little hourglass and does nothing. Task Manager says that it is "Not Responding", and it will stay like that for ages. It doesn't work at all. I cannot get back into the "Tools" menu to change all the file paths back to their default settings - it just won't let me.
My normal response would be to uninstall and reinstall, and just erase all the changes i've made that way. But this is an eePC - there is no optical drive on this machine, it was all pre-installed, and uninstalling StarSuite 8 would leave us with no way to get it back.
Can anybody help me, please? I had no idea changing the paths might make the program non-functional, especially as i copied all of the path folders over without making any changes to them. I thought at the worst i would be able to go back into it and change the paths back to default; and like i said, i saved a test file with it after making the changes, and it seemed to work fine. But apparently I'm an idiot.
Can anyone rescue me from this guilt?

1) - it isn't.
2) I haven't been. Tried it just then to see if anything different happened, but no.
3) It does. I justdid that, and it seems to have solved the problem.
It opened up, ultra-fast (faster than MS Office ever has...), and it generated multiple error messages (presumably to let me know that it couldn't find the files it keeps in those folders?):
"Error loading BASIC of document file:///C:/Documents%20and%20Settings/Kathryne/Application%Data/StarSuite8/user/basic/script.xlc/:
General Error.
General input/output error."
"Error loading BASIC of document file:///C:/Documents%20and%20Settings/Kathryne/Application%Data/StarSuite8/user/basic/dialog.xlc/:
General Error.
General input/output error."
"Error loading BASIC of document file:///C:/Documents%20and%20Settings/Kathryne/Application%Data/StarSuite8/user/basic/dialogs.xli/:
General Error.
General input/output error."
After clicking "Okay" to each error message, i typed a short sentence in the file, and successfully saved it (to the C: drive, even), without seeing any trace of the "not enough space" type messages that used to come up. And after closing the program and opening it again, i haven't seen these messages reappear.
4) I will tell let her know that it is recommended!
5) She did this last night, and has been using it in the meantime. I think she still wants StarSuite 8, but she is aware of OpenOffice.
(6) - I haven't done this, as your suggestion (3) seems to have fixed it.)
Thank-you very much for the advice and the time you spent in replying, i really appreciate this. Your suggestion seems to have fixed the problem. I am hoping that the error messages listed above won't reappear - i assume that was just the program telling me that the user folders were missing, and that it re-created them soon after? I guess similar messages will appear (and disappear) upon opening Calc and the others, as well.
The original problem - the error messages relating to disk space - has not re-appeared, i have nooo idea why, but all seems fine for now.Thank-you again for your advice! :)

File paths and archiving (and referenced files).

I've come to the stage where I need to start using referenced files (out of disk space on my laptop) and also start archiving projects. One of my plans was to start keeping an off-site backup of all the originals in case something really bad happened. I'm also going to have on-site backup of projects. But for the off-site originals I would like to have some simple way of finding the photos in case something bad happens, my idea was to simply create a PDF from the list view where I could see the photo and the file path to where it's stored (I plan to store them in simple year-month-day hierarchy).
The reason why I'm not going to archive the projects off-site is simply the cost, I did a test yesterday and it looks like just storing the originals would be approx 1/3 in size of the projects.
If someone has a better idea of how to handle this please let me knoe

I'll try to explain.
About the cost: Hard disk space is really cheap and I can not see how the cost should be that expensive. This is based on your statement that you still have your images on your laptop and that itself limits the amount of space hence a rather small library.
When it comes to backing up your projects you have several options. First, if you really want to be cheap about hard disk space (I think you should not since your images really are priceless) you can export projects of your referenced images and not consolidate the images into the exported project. Not to consolidate vs. consolidate images on export really makes a difference in the exported project size. On the other hand, not consolidate images on export of a project makes you back up your images separately, which leads to more work.
My advice is then; buy two disks (preferable three disks), and export your projects with the images consolidated into one of them and start using the other one with your referenced images.
I always advice users to have their images in at least three different locations and IMHO the ideal solution for you would be to have your images referenced on one disk and mirrored backups on the other two disks, either one stored in two different locations in case of burglary, fire etc.
Regards
Paul K

Jdeveloper 11.1.1.5 - how to change path for log file for Disk quoto exceed

I am trying to deploy to my jdev integrated webserver and am getting Disk quoto exceeded error.
How do I change the path so it goes to /scratch/<user>/ ... or something other than /home/<user>
<Jul 7, 2011 1:53:01 PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file /home/<user>/.jdeveloper/system11.1.1.5.37.60.13/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>
Handler: '/home/<user>/.jdeveloper/system11.1.1.5.37.60.13/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log' raised exception when flushing.
Caused By: weblogic.store.PersistentStoreFatalException: java.io.IOException: Error syncing file, Disk quota exceeded, errno=122
#### Cannot run application TravelRequestApplication due to error deploying to IntegratedWebLogicServer.

Set the USER Home directory as explained here:
http://download.oracle.com/docs/cd/E21764_01/install.1111/e13666/ojdig.htm#BDCJCHDF

Change path for context file 11i (11.5.10.2)

Hi ,
How to change the context file path in 11i. I have tried 2 methods "perl adbldxml.pl tier=apps appsuser=apps" and perl adclonectx.pl contextfile=/u01/visappl/admin/vis_gold.xml , it works and I can see the s_context var in .xml changed to new path . But when I ran adconfig.sh it revert back the changes to old path.
Anyone faced this issue before ?
/d01/visappl/admin/vis_gold.xml to /u01/visappl/admin/vis_gold.xml ?

How to change the context file path in 11i. I have tried 2 methods "perl adbldxml.pl tier=apps appsuser=apps" and perl adclonectx.pl contextfile=/u01/visappl/admin/vis_gold.xml , it works and I can see the s_context var in .xml changed to new path . But when I ran adconfig.sh it revert back the changes to old path.
Anyone faced this issue before ?
/d01/visappl/admin/vis_gold.xml to /u01/visappl/admin/vis_gold.xml ?You cannot change the location of the context file and it is always defaulted to $APPL_TOP/admin directory in 11i release. Any reason you want to change this location?
Thanks,
Hussein

Change Status of archived document after approval process

hi how can we change the status of an archived document in KM after it has gone thru the approval process.
the reason once we archive we cannot resubmit the document for approval.
thanks

Hi Venu,
have a look under System Administration - System Configuration -- Knowledge Management -- Configuration --Content Management -- User Interface -- Commands -- UI Command Groups -- StatemanagementGroup.
See Java class: com.sapportals.wcm.rendering.uicommand.cm.UIStatemanagementGroupCommand. Take the class and decompile this and everything needed around to understand how this class works.
Then you can choose to extend this CommandGroup to also have a command "Resubmit for Approval" or you can implement your own UI Command only for resubmitting (you will also have to activate your command (group) by settings within the configuration).
On the other hand, if all this is completely new to you, I'm a bit sceptical if the task isn't a bit too big as a first task on KM implementation topics...?
Hope it helps
Detlev

How to change path of Users Terminal Services Profile for multiple AD users on server 2003?

Hello experts. I am working on a file server migration. All data has been migrated, I am currently working on redirecting users to the new file server. I
am able to select multiple users at once in ADUC -> right-click -> properties -> profile and here I can change the home folder and roaming profile path for each all users to point towards the new file server.
The issue I have run in to is that we have roaming profiles for terminal services users. So, there are hundreds of users that have their terminal services profile
configured in AD -> Right-click user (one at a time) -> properties -> terminal services profile. Here, the profile path is configured for each user as \\OLDserver\Profiles\%username%
and I need to change it to \\NEWserver\profiles\%username%.
I know that you can configure this path via group policy, I set up a GPO; Computer / Administrative Templates / Windows Components / Terminal Services / “Set Path
for TS Roaming Profiles” as \\NEWserver\profiles and applied this GPO to an OU containing the TS servers.
The problem is, the GPO is not working... When I log in to the TS and add a document to My Documents, it is still saving under \\OLDserver\profiles\Username.
So, the settings in AD are trumping the GPO I believe. What is the best way to accomplish my goal? Thanks in advance!

> to change it to \\NEWserver\profiles\%username%.
That is "profile" in opposite to...
> add a document to My Documents, it is still saving under
> \\OLDserver\profiles\Username.
...this one which is Folder Redirection and has NOTHING to do with
server based profiles.
> So, the settings in AD are trumping the GPO I believe.
No, it isn't. When you do not enable FR and you access "Documents", you
will never see an UNC path but the local c:\users\xyz\documents folder.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How can you change path for converted PPD files? Default goes to /var/...

Hi,
I'm pretty new to the Solaris 10 world and I'm attempting to troubleshoot some Xerox print issues. One of our Oracle Users may send a print job through with an HP Initialization String...yes you read that right, and cause the Printing services to Yo-Yo.
I've installed the Xerox Printer Administration Tool 4.30.28 and then installed the most current driver package. Thing is, either the services will still bounce or the job will not print. Understandable because of the HP Initialization String.
However, I tried using the Solaris Print Manager w/ a generic Xerox driver and the Print Services did not bounce. I thought then that I would try using the actual Xerox Workcentre 7655 driver by converting the driver from Xerox and using the PPDMgr tool. Thing is, I could figure out how to really change the path so that the driver would get dropped in the /usr/lib/lp/model/ppd/system/foomatic directory.
Any way to do this?
Thank you for your time,
Mr Mister

Hello Eric
I am using the "UserDefinedErrorsDir" in LabVIEW 7.1 /7.1.1 Windows and Linux.
But there is a "syntax" problem. Let me explain this:
If you enter
UserDefinedErrorsDir=C:\
into your LabVIEW.ini File, LabVIEW will not search the Files in your C:\ Directory...
LabVIEW search the *-errors.txt Files in the
C:\errors\
Directory!
That mean that you have to create a folder with the name errors in your UserDefinedErrorsDir and after that you only have to copy all your *-errors.txt Files into this folder.
Happy Wiring
Martin CLAD

Changing Path to Archive

Similar Messages

Maybe you are looking for