Changing phone screen size

is there anyway to change the phone emulators screen size?

Sure. If you look in the wtklib/device/[the emulator you want to change] directory there is a file called [the emulator you want to change].properties (like DefaultColorPhone.properties).
There you'll find all the emulator's settings, including the screen size, the image to use for the skin, the location of each button, etc. You can play with those values and create your own skins for the emulator that way.
shmoove

Similar Messages

  • Exporting QT changes the screen size

    When I finish any work, I send it to compression on both m2v and mov, high quality. My problem is that QT changes the screen size (squeezes up and down) when I open any mov file. This doesnt happen before, with the early QT version. Im sure its a QT issue since I have tried the videos I already stream in the web (which have no distortion) and QT wont let me SEE them in their original 4:3 size.
    Anything to try?
    Thank you.

    Hi:
    Could you be getting confuse with pixel aspect ratio? QT shows your video like square pixels what gives you a distorted image.
    If you play your m2v from inside DVDSP you must see your movie fine (rectangular pixels).
      Alberto

  • Java phone screen size adjustment

    I writing application and game for java phone, targeting the 128x128 pixel screen size phone, but my phone emulator screen is bigger than this, how can I set the size to 128x128 so I can get better design?

    Please test to change screen resolution in Mac OS to see if it will help. Laptop cannot "move" screen like monitor (or TV) so resolution should be the only possible way. 
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How do I change the screen size to standard in iMovie 10?

    I can't seem to find where to change the screen to standard size - in previous imovies it gave the option when creating the new project but this version doesn't seem to.

    Star with:
    Menu > File > New from Template Chooser > Sidebar > Page Layout > Blank > Blank Canvas
    If you need to have two cards on one page then just set up one using text boxes and images to the 4 x 6 (inches?), group them and option shift drag a second copy down the page so you then have 2 and alter the copy as you need.
    Change the text and images to placeholders, capture those as a Layout and then save that as a template.
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&highlight=labels &mforum=iworktipsntrick
    1. To make the individual card follow the instructions for Labels & Business cards but use your size:
    2. To make the placeholders see Double folded Greeting Card.
    3. To make the template follow Letterhead and follower sets ignoring the irrelevant bits, and only capturing one page, before saving as a template.
    Peter

  • How can I change the screen size of my games in facebbok? Somehow they grew and I don't know what I did.

    When I bring up facebook on firefox it is a good size. My games were good before today but now they are so huge I can't play them. I think I must have hit a button by mistake but I don't know how to fix it. Can you help me?

    '''{ Ctrl + 0 }''' to reset the Page Zoom level for that domain.
    ''That's a zero - while you are viewing a zoomed page.''

  • Geforce4 Ti4200: when capturing video, how do I change the screen size

    I'm capturing video from my vcr, but the video doesn't fully fit the recording area.
    How can I stretch the video so there are no borders around the image?
    I see no way of doing this in the video options and I have the latest drivers.
    -Thanks

    This problem may occuer if card do not automatically swithes between NTSC and PAL. I have to switch it manually using WinProducer, then captur with VirtualDub.
    I'm looking for small soft switcher for NTSC/PAL (mx440 vtd8x). If anyone has - please notify.

  • Changing screen size for screen sharing

    Is there a way to change the screen size for screen sharing?
    I have a 13" macbook and a G5 with a 20" monitor. When I use RDC to a PC it automatically adjusts to use the full screen on the G5 and when I use VNC to a linux system I can create a vncserver with any arbitrary geometry that I want, but when I use screen sharing all I seem to be able to get is a 13" screen. I can use JollysFast VNC, and view it full-screen, but it's still just 1280x800.
    So, is there anyway to create a virtual window so that I can take better advantage the screen on my G5 when screen sharing to my macbook?
    Thanks,
    Rob

    Well, the question should really have been, "What is the ideal page width for the iPad?".
    The answer is that there isn't one since the iPad, like most portable devices, has two screen widths depending on whether its used in portrait or landscape mode.
    If you are designing a layout specifically for the iPad, one solution is to use a folding design where the sidebar folds down to the bottom in portrait and jumps back up to the side in landscape. This will only work for personal computers and iPads.
    The popular way of designing a layout to suit a large range of portable devices is to use a liquid, or semi liquid, layout that will automatically adjust to the fixed width browsers used on these devices.
    Something like this...
    Neither of these methods are possible using a template based editor like iWeb and this is probably one of the main reasons that Apple has given up on the application. Surfing the internet on mobile devices is growing daily and its now become essential to have a mobile version of your website or one that can be viewed on all devices.

  • Whenever i am using my laptop and my palms are on the base of the laptop and i am typing all of sudden... my screen size keeps resizing bigger or smaller

    i try to keep my thumb palms off the mouse pad when i am typing but every now and then my screen resizes larger or smaller until i take my left palm off the keyboard base its only when my left palm is resting on the base next to the touch pad. i type pretty fast so it gets annoying and yes it also jumps screens or reverts back to previous message and i have to choose ctrl z to undo and get back to my message i was typing... it also switches tabs on me as well... not sure why my palm being on the left of the keypad on the base should effect anything but it does after a while. and i have to stop what i am doing...and go to the firefox menu and change the screen size back down to 100% sometimes it goes up to 200-300 other times it goes down to 70-80% i find it annoying i i wish there was a way to turn off the screen resize in the setup panel. if its just left to be 100% i am happy with that... i don't need it to be bigger or smaller... there should be a way to LOCK it down... i understand that there are people out there with eye problems and needs to have the screen size increase using the + or - but there should be a lock so it just stays no matter what is happening on my keypad or touch pad or base of the pad... that screen size will not increase or decrease. unless i turn off the lock... perhaps this is something they can implement in the next version or do a quick update of the browser

    ''rojere [[#question-1055991|said]]''
    <blockquote>
    i try to keep my thumb palms off the mouse pad when i am typing but every now and then my screen resizes larger or smaller until i take my left palm off the keyboard base its only when my left palm is resting on the base next to the touch pad. i type pretty fast so it gets annoying and yes it also jumps screens or reverts back to previous message and i have to choose ctrl z to undo and get back to my message i was typing... it also switches tabs on me as well... not sure why my palm being on the left of the keypad on the base should effect anything but it does after a while. and i have to stop what i am doing...and go to the firefox menu and change the screen size back down to 100% sometimes it goes up to 200-300 other times it goes down to 70-80% i find it annoying i i wish there was a way to turn off the screen resize in the setup panel. if its just left to be 100% i am happy with that... i don't need it to be bigger or smaller... there should be a way to LOCK it down... i understand that there are people out there with eye problems and needs to have the screen size increase using the + or - but there should be a lock so it just stays no matter what is happening on my keypad or touch pad or base of the pad... that screen size will not increase or decrease. unless i turn off the lock... perhaps this is something they can implement in the next version or do a quick update of the browser
    </blockquote>
    sorry that is all greek to me thanks for attempting to explain what you were trying to explain sorry i just not tech person to be able to understand or where to begin ... have good day and thanks for again trying

  • Ipod AV kit / DVD's / Screen Size / Handbrake...questions please help???

    Hi everyone i was wondering if you could help me out. I have been using handbrake for a while to rip all of my DVD's. I have always changed the screen output size to 320 x 240 because i knew i was only going to be watching it on my IPOD. But i just recently picked up an Ipod AV Kit (waiting for it to be shiped). My question is this... Now that i have the av kit, i would like to watch these movies on a television (hotel room, cruise, etc...) Should i still be changing the screen size? If so to what? And if i leave the screen size to its largest size (dont know what it is ?) Will the ipod automatically shrink it down to be able to watch the movie on the ipod as well???
    Thanks in advance for any help that you can give me

    Engine, if you use a screen size larger than 320x240 you won't be able to get the file onto your iPod....iTunes won't transfer it. So continue as you are.
    I've watched iPod files on a TV. The bigger the screen the poorer the quality (obviously!), it is clearer watchable, you just wouldn't want to watch it all the time. Some scenes look naff (like the openning sequence in the X-Files film....all that snow).
    Instant Handbrake is now available. It converts straight to iPod Video format.
    Good luck

  • Changing the scree size.. possible?

    I finished my game... I'm now doing the small stuff, I want to make sure that the screen size is perfect with the game so I want to change the screen size (to 1024X768)
    I looked in the API at the Toolkit and Properties classes, I've googled for about 15 minutes but I couldn't really find anything... maybe it's just not possible to change the screen resolution...
    Does anyone here know how to do it?

    Alright.. if anyone cares, I just changed all the GUI so that it will be compatible with all screen resolutions by doing everything in scale/proportion to the screen
    I'm actually glad that I didn't find the answer, this seems like a much better solution

  • ITS mobile - Screen size on mobile device is too small

    Hi,
    I'm not able to change the screen size of my ITS Mobile application.
    If somebody can help me ...
    Here are the data:
    Internet service parameters
    ~DYNPRO_COMPRESSION : 1
    ~GENERATEDDYNPRO : 0
    ~ITSMOBILE : 1
    ~ITSMOBILEELEMFACTOR : 9
    ~ITSMOBILEELEMUNITS : px
    ~SOURCES : ZSAPLOG_MOBILE,ITSGENMOBILE4
    ~THEME : 99
    ~TRANSACTION : ZSAPLOG_MOBILE
    Internet service templatesGenerating style: MOBILE4 (Mobile Device (No HTML tables))
    ICF service - GUI Configuration
    ~THEME : 99
    ~TRANSACTION : ZSAPLOG_MOBILE
    ~ITSMOBILE : 1
    ~SOURCES : ZSAPLOG,ITSGENMOBILE4
    ~ITSMOBILEELEMFACTOR : 9
    ~ITSMOBILEELEMUNITS : px
    ~POPUPS : 1
    ~SHOW_SYSTEM_MODAL : 1
    ~STYLE : DHTML
    LRFMDscreen size is set to 16x20ITS
    Versions
    SAP_BASIS : SAPKB73108
    SAP NETWEAVER : SAP EHP3 FOR 7.0
    Mobile device
    Model : PIDION HM50 E
    CPU : Samsung Electronics(R) S5PV210
    OS : WEHH 6.5 Professional
    VER : Windows CE 5.2.29077
    Thanks for your help
    Philippe

    Perhaps an option to set the default font for discussion threads in the user preferences would be the best idea. One would think however that the Jive developers would have come up with something like that already.
    For what it's worth:
    http://www.w3.org/QA/Tips/font-size
    Do not specify the font-size in pt, or other absolute length units for screen stylesheets. They render inconsistently across platforms and can't be resized by the User Agent (e.g browser). Keep the usage of such units for styling on media with fixed and known physical properties (e.g print).
    Once again, I wonder about Jive development. Anyway, 10 pt is not best practice. It's standard for printed media, but not for screens. A search in Google shows that most recommend 16 pixels or more. Not sure what this is in points. I think 10 points is about 12 pixels, depending on screen dpi/ppi. I cannot imagine how tiny 10 pt must look on any of the high resolution Retina displays, which have twice or more density than conventional 72 dpi.

  • Screen Size Setting

    I have installed solaris 10 in the vmware workstation. During the installation, I have updated the screen size to 15 inch, I would like to change the screen size setting to 17 inch now, how could I do that?
    Thanks all in advance

    This forum is to discuss the new container technology in Solaris 10.
    A better place to ask your question would be the general forum
    at
    http://forum.sun.com/forum.jspa?forumID=271

  • Can Reflow change display tools based on changing screen sizes?

    I have a lenghty check list in a desktop-sized view, but want to change to a selection wheel type of display tool for a phone-sized screen.  Is there a way to make the display tool change, yet keep the same content simply by reducing down to the smaller screen size?
    Is it even possible to add a selection wheel type tool in Reflow?  If you don't know what I mean by "selection wheel" I've found this site that has a functioning example.  http://www.menuhead.com/example.php

    One way of having different content at different screen sizes is to have both elements on your page, and change the display of each of them to either "Block" or "None" depending on whether or not you want it to be displayed for that media query region.
    And no, we don't have a selection wheel element in Reflow. Your best bet there is probably to use a box to represent it in Reflow, and then replace it with the desired element using Dreamweaver, Brackets, or whatever other tool you use next in your workflow.
    Hope that helps, and thanks for using Reflow!
    Vic

  • Help i accidentally change my font size on my phone, now it is huge, apps and everything

    help i accidentally change my font size on my phone, now it is huge, apps and everything

    Try Settings>General>Accessibility>Large Text>select the font size you want. I may also be that you have inadvertently turned on Zoom, try double tapping the screen with three fingers to decrease zoom then go into Settings>General>Accessibility>Zoom>OFF. I would also consider turning off Triple Click Home in Settings>General>Accessibility>Triple-click Home>OFF as this may have enabled zoom inadvertently.

  • Just purchased a Mac today. Large screen but small type size on the desktop. How can I change the font size that appears on the desktop? The only place that I can find font size is in word and this is not what I need. Thanks for your help!

    JUST PURCHASED A MAC TODAY. LION OS. NEED HELP INCREASING THE SIZE OF THE FONTS ON THE DESKTOP. EVEN THOUGH I HAVE A LARGE SCREEN, THE TYPE SIZE IS VERY SMALL. GOING TO WORD AND CHANGING THAT TYPE SIZE IS ALL I HAVE FOUND IN HELP TOPIC.

    Finder > View > Show View Options
    Change the text size to whatever you want.

Maybe you are looking for

  • How do I restore my Mac operating system after a botched uninstall of Bootcamp.

    I completely botched up uninstall of Bootcamp.I wanted to uninstall and delete Windows 7 and re-do the operation. Bootcamp did not manage an uninstall and I got put back into a Widows install operation.Which won't re-install because it can't fiind a

  • Error 8 When deleting Report

    I am using the save report.vi to save a Test result. When I start the test the first time, the file is deleted before saving. When I start it more often i receive and Error 8 at the delete file. Because i ignore the error, save Report.vi opens a dial

  • Extending the material

    Hi All If I have to extend a material to a view I think tcode mmo1(create/extend a material) is used then what about tcode mm50? what is the main difference between those?

  • Sometimes report return rows sometimes not

    Hello everybody, well, I'm using apex 4.0.2 and I have a simple report returning values from my table, like this: SELECT '1', SYSDATE FROM DUAL; But, if I refresh the page with the key F5 or mannually the report doesn't return any rows. If I refresh

  • Figure numbers

    I'm a little puzzled at the functionality of figure numbers. At present I am working on a sample chapter for a major textbook publisher to show how products of IBA can compare to 'dead tree & ink' books. The chapter I'm working on is NOT chapter 1, y