Changing Photo Album Frame Size

I am having my first attempt at designing our business web page with IWEB. In reference to the My Albums Index page, the frame styles all seem to only suit landscape style photos. All our photos are portrait layout, and so they appear within the album frame with the top and bottom missing. I cannot see how to change this, without changing the photo format, which I would rather not do. Please help.

Welcome to the Apple Discussions. I don't know how to change the frame size in the album layout but you might consider using either SimpleViewer for Flash Album Exporter plugins for iPhoto which create flash based slideshows/galleries. This demo page has some examples of them. They appear to handle portrait oriented photos well. Instructions on how to embed them in an iWeb page is included.
There is one portrait oriented photo in each example.
OT

Similar Messages

  • Iphoto Books: How to Enable "fit photo to frame size" when theme grays it out by default

    Don't know if this has been posted before or not, but I've been using the "Modern" Theme in iPhoto books and trying for the life of me to figure out how to get my photos to not crop while they're in a single-photo framed layout (I'm not using 4:3 photos; mine are 8.5" by 11"). Even fully zoomed out my photos cut off at the top and bottom. I knew about the "fit photo to frame size" option but the theme had it greyed out--except for on one page, in which it was already enabled. So I must have done it before without paying attention, but it took forever to figure out how to do it again.
    Here's how:
    1. Open up the page you want to modify. I'm assuming here that your photos are already placed, but if not, place the photo you want to use.
    2. Click the Layout tab.
    3. Change the layout to the single page full bleed option--no frame. Your photo should now be blown up across the page.
    4. Right click the photo. The "fit photo to frame size" option should now be available for you to check off. Go ahead and activate it.
    5. Change the layout back to the single photo framed option. Your photo will now fit inside the frame, although to truly see the whole thing you have to open up the Options tab and select the borderless option.
    To save time in steps 1-3, and step 5, you can also change the layout of all your pages at once by clicking page 1 (not the cover, the next page), then opening the Layout tab, then selecting the layout you want. You still have select the "fit photo to frame size" individually for each photo.
    Hope this is useful for people.
    - Jake

    There is an option for the Initial View that is "Magnification:" "Fit Page".  And this works for the initial page when the PDF is opened and it does not matter what the page size it, Acrobat/Reader will automatically fill the screen with the page. If you want the zoom type to change with each page then you need  add a page open script to each page to set the pages zoom type to "zoomtype.fitP"
    this.zoomType = zoomtype.fitP;

  • How to change the picture frame size in Lightroom 5 Book

    I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative. Appreciate any ideas

    Hi again Tony,
                I have been using Adobe Photoshop 7, Photoshop Elements, Perfect Photo Suite, Photo Studio, etc., changing Image size, placing a picture on a page and then, do a simple last minute size adjustment by using the arrows to stretch or shrink it in place. Things would be a lot simpler if I could do the same thing with the cells in Lightroom 5. Cell pad adjustments do not fill the bill.
    I think we’ve pretty much concluded this exchange. Thanks again for your effort.
        david
    ay [email protected]
    Sent: Wednesday, March 12, 2014 11:27 PM
    To: dgbrow
    Subject: How to change the picture frame size in Lightroom 5 Book
    Re: How to change the picture frame size in Lightroom 5 Book
    created by Tony Jay <http://forums.adobe.com/people/Tony+Jay>  in Photoshop Lightroom - View the full discussion <http://forums.adobe.com/message/6205206#6205206

  • Changing a title frame size?

    I have a client that wanted their final product exported at 1920x1080 but now want it changed to 1280x720. I will be doing more work in the futrue with this client, so I made templates. The templates are all set to 1920x1080. Is there and easy way to change the titles sequences and regular sequences' frame size. Or do I have to start over and make a template that is 1280x720?
    Any guidence will be much appreciated. Thanks.

    Maybe I'm missing something but why not simply render your 1920x1080 sequence to 1280x720?  Or copy your timeline to a 1280x720 sequence and scale to fit.  I must be missing something.

  • Change photo album view to filmstrip

    Hello, I am very new to using dreamweaver and fireworks. I
    created a photo album in fireworks and have created a link to it
    from my webpage, I now want to modify it to show in filmstrip as
    opposed to the thumbnails that were set up by default, any ideas
    how i can do this? Cheers

    You can use
    flash (steep learning curve)
    or use javascript. Check the link below
    http://www.dynamicdrive.com/dynamicindex14/leftrightslide.htm
    You cannot lose until you give up !!!
    "connie.b" <[email protected]> wrote in
    message
    news:es0m51$k75$[email protected]..
    >
    >
    > Hello, I am very new to using dreamweaver and fireworks.
    I created a
    > photo
    > album in fireworks and have created a link to it from my
    webpage, I now
    > want to
    > modify it to show in filmstrip as opposed to the
    thumbnails that were set
    > up by
    > default, any ideas how i can do this? Cheers
    >

  • How do you change the album artwork size in the new itunes

    I just downloaded the laterst version of itunes, and I can't figure out how to change the size of the album artwork in the grid...I like to be able to see all of my albums at once, so I usually view them in the smallest size, but I can't figure out how to change that.

    I've been playing with this and discovered it has to do with your personal ratings (ie stars) for albums and songs - seems iTunes now selects the highest rated album to use for the Artist icon. If you have no ratings it seems (but not always) to select the most recent album/song to use fo rthe display.
    I've been able to get iTunes to use specific album artowk by rating both the album and all individual tracks as 5 star. You may need to restart iTunes for the changes to take effect.
    But I'd be much happier just telling iTunes which image to use - like we used to be able to do. Yet another step backwards for iTunes 11 (one of many).

  • Help! How to change the video frame size during RTP transmission

    Hi there.
    In a RTP transmission:
    How can I change the size of the frames of the video while I have the processor in the server running?
    i.e. while the server is running, i want to change a video from 400x200 to 200x100
    Thanks

    I am trying to implement the same functionality. I've tried to reset the format using the trackControl.setFormat method but this only appears to be supported while the processor is in a configured state. I'm still investigating, but if you happen to know a solution please let me know.
    Here is what I'm trying to do... In the middle of a session, I'm trying to change the video format from h263/rtp:352x288 to h263/rtp:176x144

  • Change Photo Album Thumbnail

    Hello Everyone,
    I am sorry if someone asked this question before but I couldn't find it even after spending too much time. Anyways, I am a new iPhone user and have created some picture folders using iTunes.
    What I understood after reading some articles that the thumbnail used the last picture uploaded into the folder. I amy be wrong but is there any way I can assign picture from within the folder instead of system assigns it's own.
    Thanks.

    I have a Mac and use Apple's iPhoto application for storing and managing my photos with selected iPhoto albums transferred to my iPhone.
    The first photo available in the iPhoto's album transferred to my iPhone is the photo icon or thumbnail for the album on my iPhone.
    Since you are selecting a folder or folders that contain photos to be transferred to your iPhone, is it the first or last photo available in the folder which is assigned as the photo icon or thumbnail for the album on the iPhone?
    Regardless, this cannot be changed on or from the iPhone. If it is the last photo file available in the folder that contains the photos, you need to place the photo file that you want as the photo icon or thumbnail for the album as the last photo in the folder on your computer, etc.

  • Any way to change the video frame size once imported into fcp?

    I have an edit that was done with 2 cameras. I wanted to create a multiclip edit but the size of the video from the 2 cameras are different. One file is 720x480 and the other is 720x486. My sequence is 720x480. Is there a way to adjust the 720x486 footage while in fcp to match the 720x480 footage without re importing the footage.
    Thanks

    first determine what you want your sequence dimensions to be. 480 or 486. if it's 486 then just take your 480 clips and scale them slightly so they will the entire frame. if your sequence dimensions are 480 then you shouldn't need to adjust your 486 clips.the FCP manuals suggest that your footage will look better upscaling them with Compressor rather than in FCP. but it all depends on what your delivery is.

  • Change photo album cover pic

    Is there any way to change the "cover" picture that is a associated with an album and displayed on the album list screen? I'm using ios7.
    Thanks

    Can I manually rearrange the order of the pics in the album? Or is that fixed?

  • Final Cut Pro 7 Slow Render, Frame size changing

    I have a sequence open with the following properties:
    29.97 fps frame size: 720 X 480, Compressor: DV/DVCPRO - NTSC, Audio Rate: 32.0 KHZ
    The Clips I'm editing with have the following properties:
    29.97 fps, 854X480, DV/DVCPRO - NTSC, 32.0 KHZ
    Everything was going smoothly until this one clip I dragged in with the exact same properties changed it's frame size. There had been two perfect black bars on the top and bottom of all the shots up until this one clip that changed frame size and covered up those black bars. It's also taking forever to render any small edit I do with that troublesome clip. I was thinking it might have to do with the difference in frame sizes from the sequence properties and the clip properties. I tried to change that by clicking: 1. Sequence 2. Settings.... and changing the width and heigth but it wouldn't let me. Anyone got some tips?

    Where did you get that footage?  854x480 is a display size.  It sounds like your footage was ORIGINALLY anamorphic DV.  Which is actually 720x480.  You would need to tell FCP that the footage is anamorphic, either on ingest, or by checking the anamorphic column in the browser-- EXCEPT that somehow the clips are baked in to a non standard size-- like someone exported them at the anamorphic display size.  You would do this for example if you were making a file for projection or computer use, where the anamorphic flag would not necessarily be recognized.  But you normally would not do this if you were still working with the footage in an editing program.
    You might also note that the top clip above is set to less than 100% scale.
    What happens if you select all in your sequence and Edit>remove attributes>basic motion and distort?
    Quite a mess you've built for yourself, or someone handed you.

  • How do I change frame sizes to user-defined frame sizes

    Hi,
    I hope someone can help me. I dont know how to change my project frame size to a user-defined frame size.
    ( like from 1920x1080p to 575x900p ) Ive found nowhere a answer to this question.

    You can try this workaround:
    http://library.creativecow.net/payton_t/FCPX_Custom-Resolution-Timelines/1

  • Album frames don't display properly: Since .MAC converted to MobileME help?

    ORIGINAL MESSAGE POSTED TO APPLE SUPPORT
    Ever since .MAC was recently down - and converted to Mobile Me - I have been having problems with my iWEB site:
    1. Frames around Photo Albums no longer display (on mac or win web browsers)
    - On Windows Computers - The Frames do not Display at all
    - On Mac (Safari or Firefox) they all look like see thru WIRE frames
    2. iWEB text box frames (that were once hidden) now seem to Display and
    they display in weir positions over and under other boxes.
    3. Safari Web Browser now ask to load certain fonts!
    4. Browsing my iWEB site is VERY VERY VERY SLOW!
    - From home
    - From work
    - over at friends
    In other words the speed of a persons internet connection does not seem to
    make any difference. It was all beautiful and fine before the transition, and now
    its slow.
    I have not done an upload to .MAC from iWEB for several months - so I don't believe it is anything I have done.
    My iWEB site is our FAMILY TREE site - so family members have been calling and telling me of the problems and the slowness over the past week.
    PS: I like the extra 10GB of storage, and the new Mobile ME features seem cool --BUT I MUST GET our family iWEB site running smooth once again.
    I have just recently upgraded to Leopard and for the most part everything is running fine - but as stated - I have NOT performed an iWEB upload using Leopard - the last was two months ago under Tiger.
    MacBookPro Intel Core Duo
    2.16GHz processor
    2GB RAM
    120GB Harddisk
    Mac OS X 10.5.4 (Jaguar - just installed July 7)
    Second posting to Support
    Hello,
    Ever since the transition - I'm still having the following problems with anyone trying to view my iWEB site (uploaded over 2 months ago before the Mobile ME transition).
    (of note: I performed the MobileME system update yesterday and that did nothing)
    1. Website redraw is VERY SLOW
    2. Text Box FRAMES are now Visible - when they were not before!
    3. Viewing my WEBSITE that I built using iWEB - the FRAMES applied to Photo and Movie Albums do not display properly as they did prior to the Apple mobile Me conversion. (see attached screenshot).
    As stated I have not done an iWEB upload for over two months - and everything was working fine until this Mobile me conversion. Now when viewing on Mac or Windows all of my Photo Album frames display improperly (they look like see through wireframes) when viewing in Safari or MS Explorer. NOTE: The albums will NOT display at all using FIREFOX.

    Since I recieved no responses I assume no one knows. Thanks anyway.

  • In IOS7.1.2 how can I change the size of type for Photo Album?

    I want to change the size of the type of a name of a Photo Album to match the size of earlier albums.  How can I do this?

    I am not sure, if this Will work on the title page:
    Edit text on a page
    Tap Projects, and tap the photo book to open it.
    Double-tap the page containing the text you want to work with.
    Do the following:
    Align the text: Tap the text box, and choose an alignment style from the menu that appears directly above the text box.
    Choose the font size: Tap the text box, and tap the font size you want.
    Make changes to the text: Double-tap the text box, and type.
    You may need to change the Book Theme to have a different title font size.

  • Website File Size, re:  Photo Albums

    Been wrestling with my first iWeb site for a while now. Searched tons of boards and posts, looking for help on the site size but have not found any solutions. My site has several small photo albums that are eating up most of the site size. I realize part of this is because iWeb generates different thumbnails, etc. for photo album images. I have reduced the size of the images, removed photo frames, etc. but cannot seem to find anything else to help reduce the size of these pages and site.
    Thanks in advance for any tips.

    GAdkb wrote:
    I have reduced the size of the images...
    But have you reduced the file size of the images? For a comparison of JPG & PNG file sizes, click here:
    For very large, high-quality RAW and JPG images, you can choose iWeb > Preferences and select “Optimize images on import.” This setting reduces the size of imported images by up to 60 percent so they don’t take up as much space in your Domain file.
    As an alternative to letting iWeb determine your image file sizes, before importing a JPG image to iWeb you can change its size by double-clicking the image which will open it in Preview. Then choose File > Save As... and adjust the Quality slider.
    Or click below to see the Downsize utility. It's integrated with iPhoto, so you can process an entire iPhoto album in one click:
    Or there's HTML-Optimizer Pro and Web Site Maestro here:

Maybe you are looking for