Changing PO structure in MIRO.

Hi,
is possible changing the purchase order structure in MIRO ?
I saw something like that in PO (document overview).
Best regards

Hi,
There is differrance between the document over view of PO and PO structure at MIRO.
At PO the documnet overview you can view the purchaseing documents with your own settings of variants.If once see the variant settings and if you do your own display variant (which contains the items details like Pgrp etc) for differrant documents.
But at MIRO you can oly view the drill down list of a PO in the invoice.
Regards,

Similar Messages

Infospoke BADI -- no change in structure?

Hello Experts,
We have three fields in: rsbo > edit infospoke INF1> transform
1) Source structure
2) Target structure
3) Addin Implementation.
-- I want to create a BADI and do not want to change the structure. But set some values in another table when INF1 is run.
-- Wondering if it is still possible to use BADI in this situation.
-- So can i leave the target structure blank or repeat it with the source structure itself.
Thanks,
Sweatha

You need to fill it with the source structure in the definition and move the fields in your implementation (probably by move-corresponding). Otherwise you're free to fill as many other database tables as you like.
Best regards
Dirk

Payment terms for changed invoicing party in miro

Hi Experts,
how and which payment terms get copied when invoicing party changed in miro
Rgds

hi
i will request you to check once again, in PO pmt terms flows from pur org data of vendor master and the same po pmt terms flows into invoice those things are clear.
my question is that if I change invoicing party in MIRO then which payment terms get copied, pmt terms of orginal vendor or the new invoicing party pmt terms and also the pmt terms of PO ,co.code or the pur org which one?
is there any rule or customization for that?
rgds

How to create a New Tranport Request for changed Extract structure

How to create a New Tranport Request for changed Extract structure ?
Hi Experts,
I have a FI AP Generic Datasource containing extract structure with appended fields.
It has already been activated and transported to Testing System.
Now, I am to create a new transport request for this DataSource and Extract structure.
I do not want to delete and recreate the Generic Datasource.
I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
Please let me know the steps
URGENT

Hi Dev,
Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
Hope it helps...

How to change XML Structure from one form to another form using OO ABAP.

Hi Experts,
In my Scenario, i need to do ABAP Mapping in order to change Incoming structure from one form to another.
My Input to ABAP Mapping (OO ABAP Program)would be :
 <A>..........</A>
 ..........
 <C> .........</C>
 <D>..........</D>
 <E>..........</E>
 <F>..........</F>
OO ABAP Program need to read this input and change the XML Structure into below form:
 <A>..........</A>
 ..........
 <C> .........</C>
 <X>
 <D>..........</D>
 <E>..........</E>
 <F>...............<F>
Please provide inputs (sample Code) to solve this issue.
Thanks,
Kish.
Edited by: Kishore Reddy Thamma on Jan 22, 2008 2:51 PM
Edited by: Kishore Reddy Thamma on Jan 22, 2008 2:52 PM

Hi,
Please provide sample code or Material for converting XML Structure from one form to another using OO ABAP and
Steps for ABAP MAPPING.
Thanks,
Kish.

Changing data structure in the receiver SOAP adapter

I was wondering whether it is possible to have changing data structure in terms of one receiver SOAP adapter so I could sent data type 1 and 2 to a single XI web service enabled URL and make conditional parsing in terms of the received message ?
I have a receiver SOAP adapter that ideally should be able to receive two different types of messages. But SOAP adapter is fixed to a sigle message interface that naturally has it's data structure set to just one type. I can just create conditions in terms of the data type 1 message that has been defined in the design side.
Is it possible achieve this with just one SOAP receiver adapter?

Henri,
Please go through the note: 856597 (Quesiton NO 9)
-Naveen.

Change of structure of database table

A custom database table has been created and is already in use by 10 programs. Now a new requirement has come to add a field i.e. a check box to the database table to be used by one of the 10 programs. Can we change the structure of the database table after activating it and when the table is in use? Please provide me inputs on this.
Thanks and regards
Radhika

Yes. U can change it. But I suggest u to do it through the process of 'Append Structure'.
If u have any probelm after changing follow this process.
Goto Utilities > Database Utilities> Activate and Adjust Database
Awrd Points if useful
Bhupal

Change Configuration Structure in SOLAR02 in SOLMAN 7.10

Folks,
I am looking to document the configuration of my project in SOLMAN and have created a project. In version 7.01 I was able to go into transaction SOLAR02 and click on the Configuration folder (not tab) and then choose 'Change Configuration Structure'. In the following screen I could create the hierarchical structure that would allow me to document and configure the supporting setup of my project.
However, in version 7.10 when I go to 'Change Configuration Structure' it gives me a screen saying that there is no configuration structure but no way to create it.
The Help documentation for version 7.10 indicates that I should be able to do this in the exact same manner as in version 7.01. I am on SOLMAN 7.10 SPS3; a ST01 authorisation trace indicates no errors and I have the appropriate work centre role (SAP_SOL_TC_COMP).
Any help in figuring out how to do this would be appreciated.
Thanks,
Ciará

Folks,
The solution to this was the implementation of note 1674781. This applies to SP4 and is very new so has not been translated into English as yet but SAP Support assure me that there are no pre or post manual implementation tasks.
I've implemented the note and Configuration in SOLAR02 works perfectly now.
Regards,
Ciará

PCUI: Changing screen structure dynamically

How to change screen structure dynamically, i.e based on the input need to display details of corresponding structure.

Hi Arun ,
I am not too sure what your question means .If you want to change fields dynamically then screen-variants are
a good way to do it.
If you want to change the entire structure itself for the same ROLE then you can try a viewswitch which combines several tab pages .
More details about this is available ib the PCUI cookbook.
(Implementing People-Centric User Interfaces with Business Server Pages and SAP Enterprise Portal).
An extract is given below -
To minimize the number of tabstrips, a so-called viewswitch is offered. This means that within one tab, multiple views are available and can be selected from a dropdown list in the toolbar. This viewswitch works in the same way as the tabs on a lower level. A viewswitch should be used for similar content, for example: Instead of using the three tabs Competitor Address, Competitor Products and Competitor Strategy, they can be combined to one viewswitch OPP_Competitor with the fields address, products, and strategy in the dropdown list box in the toolbar. The dropdown list box only appears if the viewswitch tab is active. To build a viewswitch, several tabs have to be combined to a viewswitch group.
Regards,
Satyadeep

How can we change the structure after a Journal has been created??

Hi Experts,
                We have made an application and create a journal for it using the journal wizard.
But later on on the development, we need to change or modify the structure of the application.
so when we try to do it, the system prompt that we cant change the structure because it has journals.
so we use the clear journal function and try it again. It still give the same prompt.
                How can we deal with this problem?? we really need to change the structure.
Thanks,
Bennie Jay

Hi Shova V.
              I tried it and it worked!!! thanks!! although it doesn't work for the first time when i try to modify. if have to process it first for it to work.
              I just hope in the next version it shouldn't be manually done.
Thanks,
Benniejay

BAPI for FM9K(Change Budget Structure)?

Hi All,
Is there any BAPI for FM9K(Change Budget Structure)?
Regards,
Viral

No standard one, as far as I'm aware...

Tcode to change a structure

wats the tcode to change a structure?
i tried se11, but could not find the structure

Hi,
You can change in SE11 itself... place name of the structure in DATA TYPE field and click on change.. or even you can give in the Table field and click on change...
Hope this would help you/
Revert back if any clarifications needed
Good luck
Narin

Help me Pl.. Changing APPENDED STRUCTURE

Hi ,
I am trying to Change the Appened structure to add extra fields. That Append structure was created by Other developer. So I took Owner for that request, But still it's not allowing me change to Structure. Saying error
"Transport objets from Package Z001 to target /RELEASED/ only". 
The object is stored in Z001 package. In change request there is no Target system specified...
Pl.. Help me how can i add field into Appended Structure( main sturcutre is -LISTVBAP)
Thanks,
Suba

Hi Suba,
You can create your own structure. All you have to do is that...
1. Goto Transaction Code SE11 and type a new structure name zxxxx or yxxxx.
2. Click the fields tab.( After finishing the techniqual settings & maintenance settings)
3. There in the first column type '.include'
4. In the second column type 'type'
5. In the third column type 'listvbap'
i.e is the structure name.
6. Now you can add the fields you want to add in your new created structure zxxxx or yxxxx.
7. It's always good practice to do like this.
Hope it helps.
Regards,
Maheswaran.B

Warning message should be raised when user changes Business Area in MIRO.

Hello all,
My requirement is,
When in MIRO transaction, in details tab the BA (Business Area) comes from PO line items. When user changes this Business Area to some other value then the system should raise a warning message and continue with the transaction. It happens in MRHR transaction in 4.6. Now we are on ECC6.0 and user wants this functionality.
So is there any configuration to be done or so I need to write User Exit?
Please explain in details like where to make these config settings and all.
Thanks in advance.

Hi Harshal,
Make use of EXIT_SAPLMRMP_010 in Enchancement LMR1M001 User exits in Logistics Invoice Verification.
Raise your warning message by validating GSBER present in structure in exit's FM : EXIT_SAPLMRMP_010
hope this helps.
Regds,
abhee

Fields missing in MPD report after change to structure and program

I have been working on a consistency report for transaction MPD.
I had created a structure in SE11 for handling the data. it was all working, but then i had to go and change the name of the fields in the structure. Now those fields are missing from the report.
When i step through the debugger, all the fields are being populated correctly, but these fields are not displayed on screen. if i change the field names back in the structure and change the code for populating these fields, they appear okay.
i have created a custom implementation within BAdi MPD_WKB_REPORTING.
i have checked the config and it all points to my Z Structure and Z Table Type. I have logged off and logged back on! made sure my code is saved and activated...
any ideas on how i can display these new fields names/values?
Just for clarity, the field name has changed. not the linked data type.

thanks for your response, however those notes and program have not done anything to assist my issue.
i have found the anwser now!
within the BAdi was a method i had to amend: IF_EX_MPD_WKB_REPORTING~GET_ALV_PARAMETERS
all fixed now!

Changing PO structure in MIRO.

Similar Messages

Maybe you are looking for