Changing Postscript Level....

I was wondering how to create a postscript Level 1 file? The current default is creating it at postscript Level 3. Any help would be great.
Thanks,
Tom

hello,
the postscript level that is generated by reports can not be changed. the level is defined by the used features and hance it is fix for each version of reports.
regards,
philipp

Similar Messages

Reader 9.2 does not choose the right postscript level

Hi,
I use an old HP4500 Color Laser Jet (it still prints very well and I have a lot of toner :-)). every time I want to print a pdf on it, it does not work, for the adobe reader sets the postscript level to 3 although the printer has only 2.
I've found the information anywhere in the adobe pages, which say:
"Note: Acrobat sets the PostScript level automatically, based on the selected printer."
In my printer settings (Win7-64 bit, driver: HP Universal Printing PS Version 12.4.2009, 61.94.3.37) I have set the level to 2 (Dokumentoptions:Postscript Options:Postscript language level: 2)
But Adobe Reader is not interested in my settings and sets it to 3 every time and I have to change it manually every time. That is not funny, when printing many pdfs.... :-(((
I don't understand this, it has happend with another driver under windows xp the same way, but now I have lost my patience.
Why does the reader does not work properly or can I tell him to do so ?
Best regards
Thomas keller, Germany

Thanks Bernd! Works just fine now. Am I that obtuse that I wasn't able to
figure this out on my own?

Using HP Laserjet 5100 as a postscript level 3 device

Hi Smart People,
I'm usually pretty good at figuring this kind of thing out, but this setup has me at the edge of my understanding. If you could help me out, I would be very grateful.
I'm planning to use my 5100 to print offset plates for use on a printing press. I'd like to be able to use Adobe Acrobat Pro to output RIP-processed color separations with trapping. Acrobat says that this is possible with Postcript Level 3 devices, and as far as I know the laserjet 5100 is such a printer.
I'm connecting the printer to the computer using a ethernet cable to the Jetdirect (directly, without using an ethernet switch). I can get the printer printing just fine, but when I try to send a separation job to the printer, I get an error message on the printer display (79.00 PRINTER ERROR). I've tried using both AppleTalk and TCP/IP and get the same results.
I've read in the HP documentation that the parallel port is the only connection that can access all of the printer's capabilities. This has me thinking that connection the printer via the Jetdirect precludes the use of the internal Postscript Level 3 RIP. So my questions are:
Is this true?
If it is true, is it possible to connect the printer via the parallel port to my mac? Maybe with a parallel-to-USB converter cable? Or with an ethernet switch with a parallel port printer server?
I've seen mention on the internet of a set of files from HP called something like "HP Laserjet Monochrome for Mac" that seems to install postscript printing capabilities, but I can't find a functioning link to the file (the file seems to have been deleted from HP's site). Is this what I'm looking for?
Is there anything else I can do (besides buy a -shudder- PC to act as a print server) to get this working?
Thanks a ton,
Gary

I think the jetdirect is the correct method to use all the printer features (postscript 3).
Setting up a direct ethernet connection is tricky. You must set a manual IP address on the Mac, even to use appletalk. You should also set an IP address on the jetdirect, then add the printer using IP > jetdirect protocol.
Set computer and printer to be in the same local-reserved subnet - example - 192.168.3.3 for computer and 192.168.3.4 for printer (subnet mask 255.255.255.0 for both).

Best Practice: Dynamically changing Item-Level permissions?

Hi all,
Can you share your opinion on the best practice for Dynamically changing item permissions?
For example, given this scenario:
Item Creator can create an initial item.
After item creator creates, the item becomes read-only for him. Other users can create, but they can only see their own entries (Created by).
At any point in time, other users can be given Read access (or any other access) by an Administrator to a specific item.
The item is then given edit permission to a Reviewer and Approver. Reviewers can only edit, and Approvers can only approve.
After the item has been reviewed, the item becomes read-only to everyone.
I read that there is only a specific number of unique permissions for a List / Library before performance issues start to set in. Given the requirements above, it looks like item-level permission is unavoidable.
Do you have certain ideas how best to go with this?
Thank you!

Hi,
According to your post, my understanding is that you wanted to change item level permission.
There is no out of the box way to accomplish this with SharePoint.
You can create a custom permission level using Visual Studio to allow users to add & view items, but not edit permission.
Then create a group with the custom permission level. The users in this group would have the permission of create & add permission, but they could no edit the item.
In the CodePlex, there is a custom workflow activities, but by default it only have four permission level:
Full Control , Design ,Contribute and Read.
You should also customize some permission levels for your scenario.
What’s more, when use the SharePoint 2013 designer, you should only use the 2010 platform to create the workflow using this activities,
https://spdactivities.codeplex.com/wikipage?title=Grant%20Permission%20on%20Item
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Change the level of isolation in a Informix connection

Post Author: mibarz
CA Forum: Data Integration
Iu2019m working over informix and I need to change de level of isolation befor make a Query.
The Informix instruction is SET ISOLATION TO DIRTY READ. In the Data flow we are using the SQL statement object for retrieve the data.
I try to change the level of isolation in the ODBC configuration, but its impossible.
¿Anybody can help me with this problem?
Thanks,
Martí

Post Author: bhofmans
CA Forum: Data Integration
Unfortunately this is not possible in Data Integrator today. We have several enhancement requests for this and similar functionality for several RDBMS. For MSSQL server a workaround is provided via a DSConfig parameter, for other RDBMS we don't have a solution yet.

Error while Changing log level in Agentry 6.0.44.1

Hi ,
I am trying to change the log level from the Agentry Administration client, but i am getting the below error message.
And it is showing any option to change the log levels for users. How can I change log level for users also.
How can I resolve this error.
Regards,
Shyam

Shyam,
This is fixed or planned fixed in 6.0.46 Agentry Server (supposed to be available anytime soon in the Service Marketplace - it was submitted already to the SMP team). The fix was in SMP 2.3 and SMP 3.0 but it was ported back to the Agentry 6.0.X release. If you have no access to the Agentry 6.0.X patches this means that your SAP License is preventing you from downloading it. You may need to contact the SAP CIC (customer interaction center) group.
Or you can do the manual setup for a workaround for now.
SAP KBA article: 2048202 - AgentryGUI does not allow to change log settings - Not all setttings were successfully changed.
Regards,
Mark Pe
SAP Senior Support Engineer (Mobility)

Dont allow to change item level data in sales order.

Hi all,
I have a requirement in which, users should not be allowed to change item level data or not allowed to add any new items in sales order on a certain condition. But they should be allowed to change the header level data.
How can i achieve this.
Can anyone help me?

Hi,
Check below exit.
MV45AFZZ and in form USEREXIT_MOVE_FIELD_TO_VBAP.
Here check for ur validation, If passes then CHECK variable SVBAP-TABIX. If it is 0 then item is created. If it is GT 0 then item is changed. Other way could be...
select data from VBAP for each sales document and item in xvbpa internal table.
If for any item u don't have data in VBAP table that means u r adding that item. So issue error message.
*       FORM USEREXIT_MOVE_FIELD_TO_VBAP                              *
*       This userexit can be used to move some fields into the sales *
*       dokument item workaerea VBAP                                  *
*       SVBAP-TABIX = 0: Create item                                 *
*       SVBAP-TABIX > 0: Change item                                 *
*       This form is called at the end of form VBAP_FUELLEN.          *
Thanks,
Vinod.

CHANGE THE LEVEL NUMBER IN AN SQL QUERY

Hi
I've this query:
SELECT LEVEL,LPAD(' ',(LEVEL+1)*5,' ')||ENAME ENAME
FROM EMP
START WITH MGR IS NULL
CONNECT BY PRIOR EMPNO = MGR
the result is:
LEVEL ENAME
1 KING
2 JONES
3 SCOTT
2 FORD
3 SMITH
my question is that if i except FORD how can i change the level number to SMITH from 3 to 2.
for example:
SELECT LEVEL,LPAD(' ',(LEVEL+1)*5,' ')||ENAME ENAME
FROM EMP
WHERE ENAME <> 'FORD'
START WITH MGR IS NULL
CONNECT BY PRIOR EMPNO= MGR
the result is:
LEVEL ENAME
1 KING
2 JONES
3 SCOTT
2 SMITH
regards
nadia

Hi,
If you notice the level of SMITH is 4 in the initial query but when you exclude FORD, then SMITH is taking up his level i.e., 3.
SQL>     SELECT LEVEL lvl, ENAME
2      FROM EMP
3      START WITH MGR IS NULL
4      CONNECT BY PRIOR EMPNO = MGR;
       LVL ENAME
         1 KING
         2 JONES
         3 FORD
4 SMITH
         2 BLAKE
         3 ALLEN
         3 WARD
         3 MARTIN
         3 TURNER
         3 JAMES
         2 CLARK
         3 MILLER
12 rows selected.
SQL> Select decode(ename, 'SMITH', lag_level, lvl) dec_lvl,
2      ename from (
3      SELECT rownum rn, LEVEL lvl, lag(level) over (order by level) lag_level, ENAME
4      FROM EMP
5      START WITH MGR IS NULL
6      CONNECT BY PRIOR EMPNO = MGR )
7      Where ename <> 'FORD'
8      order by rn;
   DEC_LVL ENAME
         1 KING
         2 JONES
         3 SMITH
         2 BLAKE
         3 ALLEN
         3 WARD
         3 MARTIN
         3 TURNER
         3 JAMES
         2 CLARK
         3 MILLER
11 rows selected.
SQL>Regards

Exporting files to a eps postscript level one

hello all.
We have just bought a new cutter plotter and the software that was supplied was artcut for a PC, I use a Mac and would like to use Illustrator (CS4) as the main design programme but to import the files into Artcut the need to be a eps postscript level one - does anyone know of a plugin that can be used to do this?
if you need more info please ask.
Thanks
Craig_5br

Craig,
I wonder whether it can be done from version 8 or something. I can choose between level 2 and 3 in 10, 1 is shown but greyed out so I believe it is possible if the version is old enough.
If you (still) have one of the old versions, you may have a look and see; hopefully you can downsave and take it from there. Someone else might tell us.
Someone?

Changing Audio Levels

Good Morning,
I want to change the levels of audio within a single clip. I used to know how to set the points in the audio line, but for the life of me I can't remember how to do it.
Thanks for your help.
Andy

option-w will show keyframes in the timeline. You can then click on the pen tool (or hit p) to put in key frames directly in the track in the timeline. Shift-T will toggle thru different heights for the tracks in the timeline which can help you and doubleclicking of the audio clip in the timeline will load the clip in the viewer where adjusting keyframes can usually be done with greater ease and precision.

How can I change the level of undos in final cut X.

I was wondering if there is a way of changing the level of undos in Final Cut X and or how many level of undos exsist in already. i.e. in the FCP 7 you had to go to prefernces and chagne it from like 3 to 99, is there something similar that needs to be done in FCP X?

You can't. It has unlimited undos, though some things seems to be missing from the undo queue, and sometimes it fails. Basically you can't change it.

Cannot change Detail level of IMAP, SMTP, or Junk logs

I am running 10.4.7 Server and 10.4.7 version of Server Admin. When I go to the Mail -> Settings -> Logging Tab I cannot change the detail level. Or at least I can use the drop down menu, but when I press Save it either blanks out the drop down menus or just resets them back to their original levels.
Is there a command I can use to change the Logs detail level via command line? Thanks in advance.

changing log levels has been discussed here many times. use the search feature. if you have questions after you search, please post.

User exit to change item level data in purchase order

Hi,
Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirment is
For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked). now i cant use ME_PROCESS_PO_CUST because process_item wont get triggered if there is no change in itemlevel data.
Regards,
Rahul

Hi Rahul,
Probably EXIT_SAPLMEKO_002.
hope it helps,
Edgar

Workflow for Changing Item Level Permission in SharePoint 2013 (Office365)

I am using OOTB Tasks List in SharePoint 2013 (O365). Now my scenario is like this:
I have two user groups: 1.Sales Managers 2. Sales Executives
Sales Managers can create & assign task to Executive. I want something like Sales Managers Can view all tasks (Which is by default view of tasks list i.e. perfact) but Executives can see only their tasks assigned to them. How can I achive this?
Can I use WorkFlow for this to Change item level permission or to assign permission to assigned to user? or JS
Can anyone have proper solution? thanks

1. make 2 SharePoint group 1>Sales Managers 2>Sales Executives
2. Show 2 WP of same task list in same page.
3. Use Audience Target for Sales Managers Sharepoint group in first Webpart property. (All
Iten view)
4. Show "My Task" view (assign to =[Me]) Bottom WP for same task list and use Audience Target for Sales Executives. Or if you want it to see
Sales Managers as well, the dont use any Audience Target.
Bottom line - SharePoint group use in Audience Target will do the trick. OOTB
Regards Sudip Misra [email protected] +1-412-237-5435 Pittsburgh, PA

Change item level security using wwsbr_api.modify_item

Hi.
Im using wwsbr_api.modify_item for change item level security.
Its code for change type access for item of my procedure
l_masterid := portal30.wwsbr_api.modify_item(
p_master_item_id => 7061,
p_item_id => 7062,
p_caid => 136,
p_folder_id => 1,
p_display_name => 'test',
p_region_id => 5,
p_access_level => portal30.wwsbr_api.item_access,
p_text => 'test change item security',
p_addnewversion => true, -- My content area have item versioning
level is audit
After execute my procedure access type = folder.
I see in wwv_things table new record
masterthingid = 7061,
id = 7064,
security = 'folder'
How to change item level security programmatically?
Thanks

Jerry,
Please forgive me for persisting with this, and thankyou for your continued patience, but let me try to explain the issue I'm having in another way...
I have a function that calls wwsbr_api.modify_item to change, say, the description. In this case "description" is the one and only thing I want to change about the item. As you've described above, I am able to query most things associated with the item (via wwsbr_all_items, wwsec_api.grantee_list, etc) so that I can pass current values to the wwsbr_api.modify parameters. However, I haven't found a way to query the current level of access control for a given item (i.e. wether it is currently set to ITEM_ACCESS, FOLDER_ACCESS, or null). As documented, I can force the item to be ITEM_ACCESS or FOLDER_ACCESS. However, I don't want to force a value and as we have concluded, passing null will nullify the current state.
So, in summary, an answer to this question will solve my problem:
Is it possible to query the current access control level of an item (either directly via one of the published views or indirectly via one of the views)?
If the answer is yes - great that solves my problem. How please?!?!?
If the answer is no - this must be a bug is it would mean that it isn't possible to use wwsbr_api.modify_item without inadvertently altering the current access control level of the item.
Again thanks for your patience...
Mark

Changing Postscript Level....

Similar Messages

Maybe you are looking for