Changing Print Size for online printing

I have hundreds of pictures from a recent trip that I want to print to a 4x6 print. The problem is that the pictures were taken in the incorrect ratio for this print size. I know that a common solution is to crop the picture, but I do not want to do this, I want the entire picture - with a white border around it if necessary. I can get Elements 9 to do this for me for home printing from the print screen and selecting the print size that I want. However, I want to upload these photos to an online printing service (snapfish, shutterfly, etc). I have tried using their digital print size option on Snapfish, but it still crops my pictures.
So,
1. How can I get elements to save the file for me in a compatible 4x6 ratio without cropping, that I can use to upload to a printing service?
2. How can I do this in a batch process as there are over 1000 pictures that have this issue?
3. If elements can't do this, what software can?
Thanks

I think all you need to do is "Process multiple files". Here is what I would do:
Put all my files to a folder.
Go to File>Process Multiple Files
Use File option as Process from:
check the resize image and input your desired dimension in inches. I would change the resolution setting to 300 so that it remain good enough for printing.
Please let us know if it works for you

Similar Messages

How can I reduce a fotobook pdf size for online printing

Hello aperture,
I have been creating a large customer book (33 x 28 cm) with aperture.
I'm working with RAW datas and the fotobook has got around 150 pages.
My online printing office accepts only PDF X3 2002 datas and I can get this with adobe acrobat X Pro.
I print the book in aperture an save it as an Adobe PDF and than, I can save the datas as a PDF X3:2002. It works perfectly.
My problem is that the online printing office accepts only 2 GB and my pdf, which I've printed with aperture, has got around 7 GB.
What can I do in aperture to reduce the pdf size and get a smaller one?
My aperture settings for Export is: 300 dpi.
Thanks for you help,
Best
Andrea

Actually in LR4 and Camera Raw 7 in Photoshop CS, you CAN create a downsampled DNG by using the Lossy Compression method of converting to DNG. In the LR 4 Export, select DNG then you have the ability to specify long dimensions or the size in Megapixels. Note, a Lossy DNG isn't un-demosiaced, it's been demosiaced but is still stored in Linear Gamma, so it's like a partially baked file, not a true unbaked raw file.
Note, in Camera Raw 7 when you set up your save dlog, it's a bit different. You select Lossy DNG and then have a dropdown for size presets...
Couple of things about the Lossy DNG, you SHOULD name it to distinguish between the downsampled DNG and your original DNG...you don't want to get into the situation where you overwrite your original. Also note that some things won't work totally as expected. For example, sharpening and noise reduction will be working but on a downsampled file. While the numbers will correlate, the actual effects will be a bit different because it's a downsampled file and more prone to potentially over sharpening. It all works, and the controls will work fine if you work at 100% zoom, but don't expect the high resolution your original file had.

Change Font size for Line printer when Printing ALV

We are using device type IBM 64xx LP+ emulation 1.00A to print to an IBM line printer.
I would like to change the font size of an ALV report I am sending to the device.
Can the font size be set in the Printer Initialization section of the Format?
Ex. I am using X_65_255
What/Where can I add the font size
Set to P-Series Emulation (SSCC P 0)
\0x1b\0x7c\0x7d\0x3b\0x50\0x30
Emulation Reset                               (SFCC @)
\0x01\0x40
Character Set = IBM PC, ASCII, IBM PC(0850)   (SFCC l 0 0 1)
\0x01\0x6c\0x30\0x30\0x31
Print Mode/Pitch Selection = DP Quality, 20 cpi
\0x01\0x7c\0x7d;Sxxxxx;0;0;xxx;0024;0048
Line Spacing = 6 lpi                          (SFCC 2)
\0x01\0x32
Forms Length Set = 66 lines                   (SFCC LINES;66 <CR><LF>)
\0x01LINES;66\0x0d\0x0a
Thanks,
Mike

You will find the P-series emulation here: [LinePrinter Plus programmer's reference manual|http://www.printronix.com/WorkArea/downloadasset.aspx?id=4546] (printronix doc)
You don't have many options with P-series. Maybe it's better to choose another emulation, and get the IBM 64xx programmer's guide.

Since upgrading to LR 5.6 I can no longer change paper sizes for user print templates.

The print preview window shows the new size laid out properly but the printer feeds only the size which was used to create the preset resulting in clipping if a larger paper and cell size is invoked in page setup or xs white space if a smaller is invoked. OS X 10.8.5, Stylus pro 7890. REINSTALLED PRINTERS AND DRIVERS, DELETED AND REPLACED LR PREFERENCE FILE, Other aps print ok. I

While the problem is unsolved I have found a workaround. If I use the "Printer" button (lower far right) and print from the printer dialed pop up custom paper sizes chosen in the "page setup" are honored and the layout prints as shown in the LR print preview). On the other hand, If I print using the "Print" button the printer feeds only the paper size chosen when creating the preset.
Bob H

How to change font size in check printing program in AP Invoice

I would like to know how to change font size in check printing program in Oracle Payables Module for Invoice printing. We are using Oracle standard
report to print check.
Concurrent program short name : APXPBFEL
Prt file : APLASP.prt
I modified prt file for code 199 like below
code "199" esc "(8U" esc "(s0p12.00h10.00v0s0b3T" esc "&k11.75H"
Font size changed for last page only which prints checks, for Void pages its printed with default font. For Page 1 printed with default font and page 2 has reduced font. This change is not intiallized for all pages.
Please let me know if you any of you know how to change fonts.
Thanks,
Anand

*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

Buying more hard drive space is a very valid option, here. Editing takes up lots of room, you should never discount the idea of adding more when you need it.
Another possibility is exporting to MXF OP1a using the AVC-I codec. It's not lossless, but it is Master quality. Plus the file size is a LOT smaller, so it may suit your needs.

Color profiles in Lightroom 3 for online printing

Hi,
I would like to know if I can enter color profiles in Lightroom 3 for online printing. I am going to use Adormapix and they have color profiles for each paper. Is there a way to do this in LR 3 and if not is this available in LR 4 or 5? I plan to upgrade in the next 6 months but may upgrade sooner if I need to.

Generally, profiles provided by labs are not for imbedding, or converting the image to send for on-line printing. They are used to simulate the final output on your screen so you have an idea what you will be getting back from the lab on that paper. This is called soft proofing. It is available in Lightroom 4 or 5 by hitting the [S] key while in the Develop module. Choosing a profile in the Soft Proofing dialog that appears beneath the histogram is a way to see how your final print will approximately appear on a selected media.
From Adorama's website: "We print in sRGB color space, so for best results convert your images before uploading." meaning that you will want to send Adorama sRGB images only. When you create a JPEG file to send to Adorama, you will want to specify sRGB in the Lightroom Export dialog under File Settings.

How can i change the region for the printer all in one

Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.

Welcome to the HP Forum!
mrmartin wrote:
Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.
You will have to contact HP to have the region for yourr printer changed. A representative will explain how to do it.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Soft proofing for online printing - CS5

After using PSE since V1 and LR since it was beta I've added CS5 and I'm a bit overwhelmed. Right now I'm trying to set up CS5 to soft proof for online printing. I read a bunch of online tutorials including Dry Creek Photo's, then downloaded and installed the ICC files for my local Costco. When I select one of the Costco printers under View - Proof Setup - Custom - Device to Simulate, I get an error message: "Could not complete your request because the ICC profile is invalid." I've repeated this with profiles from other Costcos - including one across the country from me - and from Adorama. No joy. I'm running CS5 V12.1 x64; it's the same story in 32 bit. OS is Vista 64 Home Premium (fully updated). Interestingly, I had no problem when I downloaded ICC profiles for a couple of paper-printer combinations; it's the online services that are giving me grief. Any idea what I can try next?

Keep in mind that your monitor puts limits on how useful soft-proofing is. If you have a standard-gamut monitor, what you see on-screen is already soft-proofed to sRGB (more or less). If your target profile has a larger gamut, you won't see any difference on-screen.
If you want to do this in Lightroom, just soft-proof to sRGB and you'll probably be fine. The histogram will show you if there is substantial channel clipping, and you can adjust to that. However, since you have Photoshop, my choice would be to do it there, using the Blurb profile.
Printing conditions vary widely around the world and CMYK-profiles likewise. To give you an example, US Web Coated (SWOP) v2, which is the Photoshop default, has a gamut much smaller than sRGB. In Europe the corresponding standard is ISO Coated v2 300% (ECI), which has a gamut that practically corresponds to Adobe RGB. To soft-proof effectively for this you need a wide gamut monitor.
Where the Blurb profile places in this I don't know.

F-58 Print Program for Check Printing

Hi Guys,
Have some questions here:
1) How to locate the print program for F-58 on the Check? We can configure the form by payment method but can't seem to find the print program like other FI correspondences.
2) Can i ignore the check printing and just print payment advice (if any) after posting via F-58?
Anyone has done this before?
Please advice.
Thanks and Regards,
Andrew

Hi
I think I could understand your requirement. There is no special PRINT PROGRAM FOR Payment Advice.
There is Print program for check printing : RFFOUS_C
along with above print program Payment Advice and Payment summary will be printed.
check tcode: OBVCU, here we assign the print program.
and Form will be assigned in tcode: OBVU
or in last case do payment with out any print and create payment advice manually in tcode: FBE1
any questions revert back please
Regards
Hari P
Edited by: Hari Peddi on Nov 25, 2008 9:51 AM

Printer listener for every print action in any application istalled

Printer listener for every print action in any application installed in the system

Do you have the old printer queue in use? This made problems in my case. Remove the queue and the printer in prefpane. Add the printer again and try out. Perhaps in your case it is a differnt problem, but you have nothing to loose.
Klaus

How to reduce the size of my pdf X3:2002 for online printing

Hello Adobe,
I have been creating a photobook (33 x 28 cm) with my photo editing software.
The problem is, that I've got a PDF X3 2002 with around 7 GB and the online printing office accepts only 2 GB.
What can I do, how can I reduce this large pdf in 2 GB? I'm working with Acrobat X Pro.
Thanks for your help,
Best,
Andrea

You are sending public messages, don't worry about that. It's working fine. Now, rather than trying to share screen shots and send PDFs, please focus on answering ALL of my questions. Thanks. I will recap. If any of the questions don't make sense, just say so. We need to stay focussed, not go off on a tangent.
- the size in pixels and inches (or mm) for your photos.
- what app you use for layout
- What is the EFFECTIVE resolution you are using for your images (not the original ppi, but adjusted for layout size)?
- How are you making up the pages?
- How do you make the PDF? -
- What PDF compression settings are you using?

I need to change the page setup to an unusual size for label printing

Hello. I'm trying to print a label that is 2" wide x 1-1/2 high. Firefox defaults to 8-1/2" x 11" or A4 page size and I've been unable to figure out how to change the default size to 2" x 1-1/2".
I've cleared all the margins to zero and removed all header and footer information. But how do I change the size to 2" wide x 1-1/2" high?
When I print, it will print the label correctly. However, it spits out 11" of labels instead of stopping at 1-1/2"
The printer is set up to accept the size (it's a Zebra label printer), but Firefox appears to be sending a page size that is different.
Any help here would be most appreciated.
Thank you

Thanks for your answer. Instead of formatting through FireFox, I had to go in and format it via the printer. Duh! Feel stupid not doing this first. If any one else has this problem, I was able to set it up on the printer by going to Printers > Printer Properties > Printer Preferences and set it up. Good luck and thank you for your reply.

How do i change from"offline" to "online" printing in Windows 7 for HP photosmart 5514

how do i change from 'offline' to 'online'

Under Printer Preferences click on See what's printing. That will open the printer's preferences dialogue box. Select the Printer tab and then click on online. As long as there is connectivity between your PC and the printer it should then change to online.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Workflow for creating files for online printing

I recently asked a question about making a copy of a file in Aperture 2 but am still unsure as to the best method to use. The original is cropped for posting to the web, and the duplicate is to be cropped for standard print sizes. I didn't quite get a clear answer, so I wanted to ask what other users' workflow is for preparing images for printing at an online site (I use adorama, which has an aperture plugin). In my case, my "ideal" crop, posted to a mobile me gallery, is not a standard size, but I do want the print to be a standard size. How do you keep the preferred crop for viewing online but change to a standard crop for printing?
Thanks,
John

size is mort important than format. I prefer PSD files, but png, tiff, tga, even jpeg if you do not need transparency. Just make them big enough that at some point in your composition they are scaled to 100%. IOW, if you are drawing full frame animation cells for HD they do not need to be any bigger than 1920 X 1080 pixels. If you are going to scale them up or move in on some details then the area you are going to be pushing in on needs to be 1980 X 1920.

Changing Print Size for online printing

Similar Messages

Maybe you are looking for