Changing Project Status Switch via SE10

We have a problem with tcode SE10.
We created a display role with SE10 to be able to view transport request. However it is possible (when a user is in SE10) to go (via the menu) to edit project. There it is possible change the project status switch. These switches are connected to CHARM and therefor we don't want to have any changes to these switches.
Does anyone have a solution for this. We already tried to analyze a trace file, but it seems that no authorization checks are performed when executing the actions above.
Thanks!

thanks for the update. We already checked this.
The user in question is not authorized for the authorisation object S_CTS_ADMI.
The tracefile does not indicate this object as a missing authorisation object to perform the action.
As said before it seems that no authorisation check is performed at all.

Similar Messages

  • Issues changing Project Status in Solution Manager

    Hello All;
    I have a project in Solution Manager that is ready to be closed out. When I try to advance the status from 'TEST" to "Emergency Correction' I get the following messages
    MsgType Message Class        Msg.no. Message text
    E       /TMWFLOW/PHCNTRL          54 Change transaction is incorrect
    E       /TMWFLOW/PHCNTRL          56 Phase transition from 'Test' to 'Emergency Correction' is not possible
    I have not been able to find any more information on these messages or how to correct the Change Transaction. I appreciate any and all help.
    Thanks,
    Mike

    Hi,
    R u changing from Task list
    goto to ur project Maintenance cycle from System landscape tab
    here click Action Tab ..for changing the next phase...
    since currently u have already tried there wil be error so go to error tab it will be on the top right side...
    here click on it and remove all the errors
    once you have removed the error  then only choose update maintenance cycle action and later move to next phase
    Thus it will solve ur problem
    Regards
    Prakhar

  • [ChaRM] What happens to CTS status switch if SolMan fails?

    Dear Gurus
    We use ChaRM functionality for ERP system. We set "Request can not be created" and "Request can not be released" by CTS stutus switch. (T-cd: /TMWFLOW/PROJ )
    I wonder what happens if SolMan server goes wrong and becomes unavailable.  Does anybody know?
    Which one is true?
    1. CTS status switch is automatically turned off and request can be freely created and released in satellite ERP Dev system.
    2. CTS status switch remains even though SolMan server is down.   Administrator need to turn off status switch in sattellite ERP Dev system?   (What is the T-cd for this?)
    Thank you!!!

    Within dev system, if you use SPRO_ADMIN, you should see a list of IMG-procets.
    Double click on the one you care about.
    Within tab Transp. Requests, the current client's CTS settings are listed (button CTS project status switch).
    Regards,
    Jan

  • Unable to change the status of a project to approved

    Dear Members,
    I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
    I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
    Please enter an active project manager for this project in order to change or update this information._
    Can any one please help me in resolving this issue.
    Many thanks in advance.
    Regards.

    R4S wrote:
    Dear Members,
    I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
    I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
    Please enter an active project manager for this project in order to change or update this information._
    Can any one please help me in resolving this issue.
    Many thanks in advance.
    Regards.Please see these docs.
    CMRO Partially Implemented Visit Errors with "Please enter an active project manager for this project in order to change or update this information" [ID 864812.1]
    Update_Project Erroring With PA_PR_INSUF_PROJ_MGR While Creating Task For Templates [ID 1085068.1
    Thanks,
    Hussein                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Set Project status error Activity 000005012744 0010 No changes possible bec

    Hi All,
    I am getting this error on RPM "Activity 000005012742 0010: No changes possible because of status CLSD"  after setting project status to Complete Technically or Closed. I could not change the status to any other status when set to these two statuses.
    I tried looking for custom implementation in the BADIs but unfortunately breakpoint is not triggered on any of the BADIs. Is this a configuration issue?
    Thanks and I hope someone can help me.
    Renz
    Edited by: Jorenz.Llanes on Jul 5, 2011 8:43 AM

    I found out that the activity of a project should be released first before setting a status to the Project level after which is applied to the project hierarchy.

  • Displaying error message on XRPM Portal on changing the status of  Project

    Hi All,
    I want to display an error message on the Portal when user tries to change the status of the Project from 'CREATED' to 'RELEASE' and clicks on SAVE.
    I have checked the following BADI's but i am not able to retrieve the newly selected status.
    DPR_ATTRIBUTES -> Methods 1) CHECK 2) CHANGE_CHECK
    RPM_PROJ_CUST_FIELDS
    Any help will be highly appreciated!
    Thanks.
    Runal.

    Hi Runal,
    I think, the reason is that the status is not attribute of the project, rather a linked object. That is why the Badi method is not get called.
    Please check with the Badi DRP_EVENTS, this Badi is typically called, if the status of object is changed.
    Kind regards,
    Zhenbo

  • Can we change budget status through project setup system status window?

    Hi Experts,
    Can we change budget status through project statuses window?
    Thanks

    Hi
    Project statuses window will only deal with the status of the project, not the status of the budget.
    Dina

  • Project Status Change Date

    Hi!
    I wolud like to see the Project Status Changed dates. Which data base table I need to refer?
    Thanks in advance.
    Regards,

    It is not given in any standard report/ table, you need to develop some report and that also may not be straight forward to get it.  But the same you can get in  any PS structure maintenance T Code say Cj20n  >Open that WBS> Keep cursor on it> Click on bule I Icon which get displyed on right hand pan > click on first left menu here you will get all the change history.
    With regards
    Nitin P.

  • CJ20N Authorization Object for Project Status Changes

    Hi Gurus,
      Can any one knows the Authorization Object responsible to control the change of status for a project in the CJ20N?
      We want to control who can and who can't change the STATUS of a project independent from other changes.
    Regards
    Gustavo Balboa

    User authorization object B_USERSTAT. Before that u should define authorization key in Tcode:BS52 and assign it to User status in Tcode:OK02.
    In authorization object B_USERSTAT set ERSL=Authorization Key, so that the user can change the status of that perticular status only.
    Venkat

  • Unable to commit the project status change

    Dear Experts,
    I am developing a utility program to change the status of multiple projects at once.
    I am changing the status of Phase, task, check list,check list item and Project status from
    Create to Release, release to Complete and to Work Effor Complete.With respective status change BAPIS.
    when ever the projects is not able to change the status success fully due to validations
    such as person respondsble not mainted or any other basic data is missing,
    We are not committing the changes if every thing goes fine we are commiting with BAPI: BAPI_CPROJECTS_COMMIT_WORK
    but when we commit with this it still retaining the previous project status in LUW and trying to commit previous project too.
    and commit is getting failed.
    I am not able to roll back or free the project with BAPI:BAPI_CPROJECTS_ROLLBACK_WORK and BAPI_BUS2172_FREE
    BAPI_CPROJECTS_ROLLBACK_WORK: when iam trying to use this BAPI it is going to short dump
    BAPI_BUS2172_FREE:  It is returing error saying unable to free the project.
    Could you please tell how to roll back the changes to the project or how to commit only success full projects (Project with out any errors in status change.)
    Kindly do the needful
    Thanking you.
    -ravi

    Program flow
    Loop at It_Project
    *Status Change for Check List
    CALL FUNCTION 'BAPI_BUS2176_SET_STATUS'
        EXPORTING
          checklist_guid                = p_guid
      IV_STATUS_PROFILE             =
         is_business_transaction       = lv_bus_trans
         TABLES
             return                    =  t_return.
    *Status Change for task
      CALL FUNCTION 'BAPI_BUS2175_SET_STATUS'
        EXPORTING
          task_guid               = p_guid
          is_business_transaction = lv_bus_trans
        TABLES
          return                  = t_return.
    *Status Change for project
    CALL FUNCTION 'BAPI_BUS2172_SET_STATUS'
          EXPORTING
            project_definition_guid = p_guid
            is_business_transaction = lv_bus_trans
          TABLES
            return                  = t_return.
    If there is a sucess in changing the status.
    CALL FUNCTION 'BAPI_CPROJECTS_COMMIT_WORK'
        TABLES
          return = t_creturn.
    Else.
        CALL FUNCTION 'BAPI_CPROJECTS_ROLLBACK_WORK'
          TABLES
            return = t_rreturn.
    Endif.
    Endloop.
    In the above code when we are executing  BAPI_CPROJECTS_ROLLBACK_WORK is going for dump.
    If we simply commit with  BAPI_CPROJECTS_COMMIT_WORK for all the projects then if any project
    commits with error same error is re produced for all the following projectsid (unable to destroy the LUW).
    and in CRM we can't use 'BAPI_TRANSACTION_ROLLBACK'.

  • Can not administer Catalyst 2960 switch via console

    Hello,
    I want to configure my switch via console cable, the switch boots up normally, and there are no configurations present on the switch.  However, anything I type does not appear on the terminal client.  I used several terminal clients (TeraTerm, PuTTY, HyperTerminal), all latest versions as well as different PCs.  I even forced the switch to rommon mode, still, anything I type does not appear on the terminal client.
    Here's the output of TeraTerm:
    Boot Sector Filesystem (bs) installed, fsid: 2
    Base ethernet MAC Address: e8:40:40:06:f0:80
    Xmodem file system is available.
    The password-recovery mechanism is enabled.
    Initializing Flash...
    flashfs[0]: 542 files, 19 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 32514048
    flashfs[0]: Bytes used: 11565056
    flashfs[0]: Bytes available: 20948992
    flashfs[0]: flashfs fsck took 11 seconds.
    ...done Initializing Flash.
    done.
    Loading "flash:/c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
    File "flash:/c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin" uncompressed and installed, entry point: 0x3000
    executing...
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(50)SE5, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Tue 28-Sep-10 13:44 by prod_rel_team
    Image text-base: 0x00003000, data-base: 0x01400000
    Initializing flashfs...
    fsck: Disable shadow buffering due to heap fragmentation.
    flashfs[1]: 542 files, 19 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 32514048
    flashfs[1]: Bytes used: 11565056
    flashfs[1]: Bytes available: 20948992
    flashfs[1]: flashfs fsck took 2 seconds.
    flashfs[1]: Initialization complete....done Initializing flashfs.
    Checking for Bootloader upgrade.. not needed
    POST: CPU MIC register Tests : Begin
    POST: CPU MIC register Tests : End, Status Passed
    POST: PortASIC Memory Tests : Begin
    POST: PortASIC Memory Tests : End, Status Passed
    POST: CPU MIC interface Loopback Tests : Begin
    POST: CPU MIC interface Loopback Tests : End, Status Passed
    POST: PortASIC RingLoopback Tests : Begin
    POST: PortASIC RingLoopback Tests : End, Status Passed
    POST: PortASIC CAM Subsystem Tests : Begin
    POST: PortASIC CAM Subsystem Tests : End, Status Passed
    POST: PortASIC Port Loopback Tests : Begin
    POST: PortASIC Port Loopback Tests : End, Status Passed
    Waiting for Port download...Complete
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco WS-C2960-24TT-L (PowerPC405) processor (revision J0) with 65536K bytes of memory.
    Processor board ID FOC1510X4ZQ
    Last reset from power-on
    1 Virtual Ethernet interface
    24 FastEthernet interfaces
    2 Gigabit Ethernet interfaces
    The password-recovery mechanism is enabled.
    64K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address       : E8:40:40:06:F0:80
    Motherboard assembly number     : 73-12600-05
    Power supply part number        : 341-0097-03
    Motherboard serial number       : FOC15094MZG
    Power supply serial number      : DCA150583WQ
    Model revision number           : J0
    Motherboard revision number     : A0
    Model number                    : WS-C2960-24TT-L
    System serial number            : FOC1510X4ZQ
    Top Assembly Part Number        : 800-32797-01
    Top Assembly Revision Number    : F0
    Version ID                      : V09
    CLEI Code Number                : COM3L00BRE
    Hardware Board Revision Number  : 0x0A
    Switch Ports Model              SW Version            SW Image
    *    1 26    WS-C2960-24TT-L    12.2(50)SE5           C2960-LANBASEK9-M
    Press RETURN to get started!
    *Mar  1 00:00:31.381: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
    *Mar  1 00:00:32.556: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
    *Mar  1 00:00:35.802: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to down
    *Mar  1 00:00:35.861: %SYS-5-CONFIG_I: Configured from memory by console
    *Mar  1 00:00:36.012: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(50)SE5, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Tue 28-Sep-10 13:44 by prod_rel_team
    *Mar  1 00:00:36.037: %SSH-5-ENABLED: SSH 1.99 has been enabled
    *Mar  1 00:00:37.060: %LINK-5-CHANGED: Interface FastEthernet0/6, changed state to administratively down
    *Mar  1 00:00:37.094: %LINK-5-CHANGED: Interface FastEthernet0/7, changed state to administratively down
    *Mar  1 00:00:37.127: %LINK-5-CHANGED: Interface FastEthernet0/8, changed state to administratively down
    *Mar  1 00:00:37.161: %LINK-5-CHANGED: Interface FastEthernet0/9, changed state to administratively down
    *Mar  1 00:00:37.195: %LINK-5-CHANGED: Interface FastEthernet0/10, changed state to administratively down
    *Mar  1 00:00:37.228: %LINK-5-CHANGED: Interface FastEthernet0/11, changed state to administratively down
    *Mar  1 00:00:37.262: %LINK-5-CHANGED: Interface FastEthernet0/12, changed state to administratively down
    *Mar  1 00:00:37.362: %LINK-5-CHANGED: Interface FastEthernet0/13, changed state to administratively down
    *Mar  1 00:00:37.362: %LINK-5-CHANGED: Interface FastEthernet0/14, changed state to administratively down
    *Mar  1 00:00:37.362: %LINK-5-CHANGED: Interface FastEthernet0/15, changed state to administratively down
    *Mar  1 00:00:37.404: %LINK-5-CHANGED: Interface FastEthernet0/16, changed state to administratively down
    *Mar  1 00:00:37.446: %LINK-5-CHANGED: Interface FastEthernet0/17, changed state to administratively down
    *Mar  1 00:00:37.488: %LINK-5-CHANGED: Interface FastEthernet0/18, changed state to administratively down
    *Mar  1 00:00:37.497: %LINK-5-CHANGED: Interface FastEthernet0/19, changed state to administratively down
    *Mar  1 00:00:37.539: %LINK-5-CHANGED: Interface FastEthernet0/20, changed state to administratively down
    *Mar  1 00:00:37.572: %LINK-5-CHANGED: Interface FastEthernet0/21, changed state to administratively down
    *Mar  1 00:00:37.606: %LINK-5-CHANGED: Interface FastEthernet0/22, changed state to administratively down
    *Mar  1 00:00:37.639: %LINK-5-CHANGED: Interface FastEthernet0/23, changed state to administratively down
    *Mar  1 00:00:37.673: %LINK-5-CHANGED: Interface FastEthernet0/24, changed state to administratively down
    *Mar  1 00:00:37.690: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
    *Mar  1 00:00:37.715: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
    After the last line, I can not type any command at all.  I encountered this on three 2960 switches that we have here in our laboratory.  Can anybody help me on how I can get access to the switch via console?
    Thanks in advance.

    Have You Check your console Cable.
    also
    If u are using USB to Serial check driver are properly installed.
    else
    See Helpful Cisco Documentation
    http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010ff7a.shtml
    Do Rate Helpful Posts

  • Automatic graphic switch via Apple Script

    hi community,
    I would like to change the "Automatic graphics switching" (tick on / tick off) via an Apple Script. I made the following script and it works, except with line "click chckbox 2". Here it ticks the box "Show battery status in menu bar". With "click checkbox 1" it takes the "Lock-Button".
    I would be glad if anybode could tell me the right code for ticking the checkbox "automatic graphics switching" via Apple Script.
    Thanks a lot
    PS: Yes I know that tool gfx Status, but I wanna do this via Apple Script.
    tell application "System Preferences"
      activate
              set current pane to pane "com.apple.preference.energysaver"
              delay 0.5
              tell application "System Events"
                        tell process "Systemeinstellungen"
                                  tell window "Energie sparen"
      click checkbox 2
                                            delay 0.5
                                  end tell
                        end tell
              end tell
      quit
    end tell
    quit

    Hello
    You may try this. It works with MacBook Pro 2010 under 10.6.5.
    tell application "System Preferences"
        set current pane to pane id "com.apple.preference.energysaver"
    end tell
    tell application "System Events"
        tell process "System Preferences"
            tell window 1
                tell group 1 -- automatic graphics switching
                    tell checkbox 1 -- automatic graphics switching
                        click
                    end tell
                end tell
            end tell
        end tell
    end tell
    And the script below will set the option to the specified value.
    set_automatic_graphics_switching(0)
    on set_automatic_graphics_switching(i)
            integer i : status of automatic graphics switching
                0 : off (unchecked)
                1 : on    (checked)
        if i is not in {0, 1} then error "Invalid argument: " & i number 8000
        tell application "System Preferences"
            set _was_running to running
            set current pane to pane id "com.apple.preference.energysaver"
        end tell
        tell application "System Events"
            tell process "System Preferences"
                tell window 1
                    tell group 1 -- automatic graphics switching
                        tell checkbox 1 -- automatic graphics switching
                            if value ≠ i then click
                        end tell
                    end tell
                end tell
            end tell
        end tell
        if not _was_running then
            tell application "System Preferences" to quit
        end if
    end set_automatic_graphics_switching
    Hope this may help,
    H

  • " Changed " Design Status after deployment involving two runtime reposiory

    Hello everybody,
    I'm experiencing severe metadata management problems in OWB 10.1.0.2.0.
    When I deploy a mapping into the production runtime repository , it appears with a "changed" design status when I switch back to the development runtime repository.
    If I can't rely on the design status it will be a nightmare to manage mapping delivery !
    Anyone can share his experience about managing multiple runtime repository ?
    Best regards,
    Franck.

    Hi Franck
    Looking at your single design repository that deploys to two runtime repositories; I would say when you switch the runtime, it updates internally the default connected runtime for the mapping. As you will remember you can deploy straight from within the design browser if you have previously set the deploy mode. It will be updating this.
    Not much you can do, except create a different design repository. It is somewhat poor I know. I raised a number of TARS on this myself. Perhaps they improved it in Paris (but I somehow doubt it.) Multiple database deployment configuration should be in there but so should real user based functional security and versioning(via the frontend without script repository hacks).
    Too sum up, nearly all sites use the multiple design repository approach.
    Regards,
    Richard Harrison

  • Picking status in Out. delivery changed to status A after GR post with MB0A

    Hi,
    I am facing an issue in our production system, these is the scenario:
    - Replenishment delivery
    - ZPicking confirmation idoc sucessfully picked the outbound delivery and post the GI.  The material was cut and it was batch splitted.
    - Then it was performed a GR (mov 101)  against a stock transfer order via MB0A.
    - After this GR posted, the status of picking of the parent material of the batch split was changed from status " " (Not relevant) to status "A" (Not yet processed).
    - Also the status at header level was changed.
    Current status of the delivery
    Header Status
    Picking Confirmation --> B
    Total Gds mvt status --> B
    Item Status
    Item 10:
        Pick confirmation --> A
        Goods movt --> B
    We have tried to reverse the GI to generate it again and reset the statuses but it is not possible to do it via VL09 neither MBST, etc.
    Any idea on how to correct this problem?
    Thanks,

    Hi,
    What is the moment type being taken for PGI through idoc?check the moment type definition for its allowable transactions and foe reverse.
    Regards,

  • Usage decision follow up action change of status in equipment

    Hello every one, I am having calibration scenerio in my project. All process is running properly but the issue which i am having is that when i am giving usage decision i should get a pop up to change the status of the equipment which is not coming in my case. i have checked followup action whch PM_QM there i have activated 2 Funtion modules one is for automatic TECO of order which is working properly and second is change to status in equipment master which is not working for me. Kindly give some guidance to me on same.
    Regards
    Abhishek

    Helloo,
    Please let me know the equipment type you are using.
    If you are using equipment type other than Q then u may get such type of issues.
    Please try out with equipmetn type Q or P
    Thanks

Maybe you are looking for