Changing result Recorded after UD and Insp Stock posted.

Hi,
Is it possible to revoke or change the result recorded after UD is given and also stock posted for material.
In inspection plan i have activated the long term inspection check box for that particular MIC for which i want to change the results.
I have done UD reversal, stock reversal etc.
Then
I hv tried through QE02 but its showing:
Short term Inspection Completed.
All Insp.Completed.
UD has been Made.
pls suggest the possible solution on this.
Rgds,
Yogesh

Dear sujit,
We have Ztcode developed for Stock posting reversal not for UD reversal.
Just want to know inspite of checking box for Long term planning in MIC also in Inspection plan.
Is there any provision for reentering results for already closed MICs.
User has made wong input entry while recording results.
Rgds,
Yogesh

Similar Messages

QM-result recording after doing usage dcision and stock posting.

HI gurus,
My client is steel manufacturing industry.The requirement of client is that, after doing usage decision and stock posting they want to do result recording.Thy want it like this because in case of urgency they pass the material and afterward they do the result recording.Is such a scenario is possible in standard sap.If yes pls. provide me the solution.
Thanks in advance.

I wouls suggest you look at Jan's suggestion. Setting everything as LT characteristics is
1) not a good quality practice
2) you would still have to manually to the UD I believe, auto UD won't work. So if you have to manually process the lot anyway, you may as well just make the sotck posting and leave the lot open for results recording.
Craig

Prevent entering result recording after the production order closed.

Hi QM Gurus,
I want to prevent entering the result recording (we used inspection point) after the corresponding production order was closed.
Please help.
Cheers,
Sun

hi all,
Enhancement QEEM0015 is only used for individual result, it can not be used for summerized result.
Enhancement QEEM0011 is the right one for my case.
It works before the system valuates the inspectoin characteristics' result for both individual and summerized result.
Thanks all for your help.
Regards,
Sun

Movement Type Change From 321 to Some other In Stock Posting (Insp Type 05)

Hi,
    While doing the stock Posting From quality to Unrest - Automatic 321 Movment type is happening
    But my client neads to identify how many qty from custmer return is passed to unrestricted from
    quality.
   i have problem in identify since 01 and 04 and also 05 all are having the same mvt since it is automatic
Can it be possible to chnage the mvt for the particular Inspection type 05.
kindly give me is there any way to solve this issue.
Regards
jai

Dear jaikumar
No need of changing movement type for the same. You have too many options to get this fugure
You can use Tcode se16, se16n and in the table QALS you will be able to know the quantity posted to unrestricted by selecting 05 inspection and from to date in input for the table view
else go to the standard report . Tcode MCXC, MCXI you will get the report based on inspection type and period
Regards
gajesh

Change Results recording date

Hi,
I am using QE51N for results recording. I want to change the results recording date for inspection type 14. Is there any BADI or user exit to do the same.
Thanks & Regards
V. Devaraj

There is no user exit to change the Result recording date.

Automatic UD and Automatic Stock Posting

Step 1 QS51
For Plant 1000, for 04 inspection type, I have created Z04GPF as selected set for taking UD
On double clicking the Selected set codes I wll reach the following screen
As per my requirement, I have maintained the setting for Automatic stock posting to Unrestricted Stock from Quality Inspection.
Step 2 ; QA16
Now My requirement is that I want to take Automatic UD and subsequently Automatics Stock Posting should takes place from quality stock to Unrestricted stock.
On QA16 screen I have inputted the following parameters to select the lots of the same production order and same batch material.as shown below
Sir, I am facing Problem at the area shown below on QA16 screen
Here I want to input the UD selected set maintained for plant 1000 (In specific as Accepted A ). But on selecting F4 at the field shown above I am getting the below popup window
This is the UD for SAP Standard Plant (01 GR WARENEINGANG)
Also I am unable to see 04 inspection type
The same problem is coming when I am selecting F4 on the field UD code
Dear Sir, Please suggest me whether and Where I was wrong
razvee.shaik

hi,
even i am asked to use qa41 for sheduling the job but whenever i schedule job and try qa16 for the ud and posting i recieve an error i.e (No batch input data for screen SAPLIPW1 0200)
do u faced the same error / if u have a solution to batch job, tell me about it. i am having a relavent problem ..
Regards,
Sameer Jalal

PDF comments change to XML after copying and pasting

Has anyone experienced a problem with comments in mark-ups where they appear as normal text until they have been copied (and pasted into Indesign, though this part is not relevant) but when ticked as completed they change to xml formatted text? See before and after pics below:
Oops, sorry, cannot load images, must be an error with the upload software. Not accepting TIFF/JPEG or PNG.

As a follow up to this I have just experienced another similar situation where the the pdf comment changes to Greek text...
the left hand pic is from the comment window, the right hand pic is from the mark-up in the text. Very odd...

Want to change the Result Recording Result

Hi All,
I have a problem Please help me out or suggest me is it possible to do-
Result Recording is done and saved for a particular lot and result is accepted and i did UD for that and accepted as well as i posted to un-restricted stock with Acceptance and saved.
Now my client want to chance the result and reject it and post it to blocked stock again do UD.
This is our normal requirement here.
Regards,
siddharth shanker

Hi,
You have to explain your client the process and its pros and cons, once you give UD and post the stock then how will that be canceled. Keeping apart SAP, in actual domain practice also when you accept the lot you can't reject it on same challan, you have to so separate process.
Here best way is to assign 08 Insp type to that material and create the lot using 322 movement type (MB1B) and again reinspect and post it to block and send back to vendor. This is only if you need to record results again, otherwise you can directly post from unrestricted to Block stock using movement type 344 i.e. from unrestricted to block then purchase person will send it back to Vendor. You can raise notification to keep record of this movement.
Best Regards,
Shekhar

Result recording to be done after UD with long term inspection

Dear All
I have activated two MIC's for long term inspection. Inspection lot is created and UD is provided after Result recording. i have run QA12 and go to EDIT/RESET/INSPECTION COMPLETION. status of UD changed to LTIN and then in Qe51 / qe51n i selected long term inspection but error message is coming '' NO CHARACTERISTICS WERE FOUND". Plz help , how to do result recording after UD.

Dear Even if the char is long terms & if you have forcefully completed the chars then even if char has LTIN status it will not allow you.
But check this in your sandbox and revert.
1. In the MIC set the 'Optional Characteristic' and 'Long tem inspection ' in the control indiactors.
2. Attach MIC in inspection Plan
3. Do results recording and comlpete UD. all short term charactericts are closed.
4. QA12Change UD with history for Inspection Lot ,
Menu-> Reset inspection completion -> Status changes to LTIN
5. Goto QA02 --> you woudl see " do you wnat to compete Long term inspections" --> yes
6. Then Long term inspection characterictic is open for results recording.
7. Change and complete results --> Make UD
Check and Revert.
Cheers
KK

Reset inspection plan after results recording

Dear all,
i had one problem to be cleared, if u can please solve it.
My problem is i have assigned wrong inspection plan for one insp. lot, and i have recorded results and saved. My question is there any provision that i can reset the other inspection plan for that particular lot and record resullts again.

Hi Vijay,
Goto QA11/QA12 Change Udage Decision enter the inspection lot number and select Usage Decision -->Functions -->Cancel Lot.
Then cancel the Material Document by which the Inspection lot was created.
Then make the GR and new lot will be generated. Then assign the Inspection Plan, Results Recording.
Thanks and regards
Murugesan

Timing of usage decision and results recording

Hi Gurus,
The business have different testings that require some time to get the results. They need to sell the products even before the results are out. So they need to UD the ilot even if the tests are not yet done. How can we record the results if the ilot is already done with UD and the product is already sold?
Thanks for the help.
Eva

Its not recommanded to do the Result recording after material is sold but still you can try to use the concept of "Long term Inspection "
While creating a MIC ,check a control indicator ,tick on "Long term Inspection "
This will allow you to do result recording after UD
In a long-term inspection:
There can already be a usage decision for the inspected material during the long-term inspection
You can still record inspection results for long-term characteristics, once you have made the usage decision
The system sets a separate status in the inspection lot to identify the long-term inspection and it provides special worklists and workflow tasks for this purpose

Reverse the result recording in QM

What is the process of cancel the result recording in stage of INSP RREC SPQR lot statuse in SAP QM.

Hi,
Just go to QE12..Result Recording changes for the inspection point. Enter the inspection lot, operation number and the sample number.
The next screen will show the results. Click on the option "Put to Process" The status will change from 5 "Processing completed" to 2 "Inprocess". Then remove the result for that characteristic and save it. Automatically your result recording will be reversed.
Please ask me if you need any other details.
Regards,
Srinivas.D

Actual lot Qty and inspection stock

Hi,
We are using early inspection for 04 inspection lot. When I release my process order the inspection lot is created. As usual, the first inspection doesn't have Actual lot qty and Insp. stock is checked. Now, when I create new inspection lot for same process order, the inspection lot has Actual lot qty and Insp. stock is unchecked.
In material master Post to insp. stock is checked.
Thanks for your help in advance.
Bhavesh Patel

Dear
U need to go for Order Change Management For doing This As u said ur Changing the Qty and it should reflect in the inspection lot
Please Follow this Link :
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0002c1c-f07c-2c10-3c93-b053715529b4?QuickLink=index&overridelayout=true]
With Regards
Pushpalas

Specifications in Result Recording

Hi QM Gurus,
Here I encountered an interesting problem, Lower and Upper specification limit have been maintained in inspection plan.
However, when make result recording the Lower and Upper specification limit are not transported into result recording screen.
Pls help.
Cheers,
Sun

Hi Sun
I think Inspection Plan Operation Detail setting is disturbed.
Go to Change Task List (QP02) -> Operation -> Select Operation and open Operation Details (F6) -> Scroll down find for Recording View in Quality Management General tab.
By default Recording View is set to "Single Value & Summurized Result". If it is not then set.
Hope this will resolve your problem
Atul

Prevent Change agent from making changes to requests after approved

Does anyone know how to block changes made to a Change Request after it has been approved?

If you're talking about preventing changes to a change request record after it's been approved, I have a couple suggestions, but they require custom development effort.
One possibility would be to create a custom control applied to the Change Request form that does this for you. Using Anton's custom control technique, you could create a control that, when the form loads, reads the current state of a
CR's review activity and, if it's approved, finds and disables all of the controls on the form.
http://blog.scsmsolutions.com/2011/08/create-custom-user-control-for-scsm-2010/ This post is for SCSM 2010, but the principal is the same for SCSM 2012.
Another possibility is to create your own Change Request form from scratch that implements similar capability (ie: every time the form is opened, the FormLoad event checks the state of the review activity and disables/enabled all other form controls appropriately).
Creating your own form would require you to override the out-of-the-box form for which there is no supported method yet. Plus, creating your own change request form would require much more development effort including knowledge of Visual Studio, WPF/XAML,
C#, and the unsupported console API.
These techniques to "block" changes will only work on a form, though. A user would still be able to make changes directly with powershell or the SDK. They could also make changes with any of the out-of-the-box console tasks that manipulate change requests.
I'm afraid there's no "simple" answer, though.
However, keep in mind that all changes to any record in Service Manager are recorded in the history of that record. So while it might be difficult to block changes, you can always review any changes that were made after a CR has been approved, including
who made the change and when. That's more of a reactive approach instead of a proactive approach.

Changing result Recorded after UD and Insp Stock posted.

Similar Messages

Maybe you are looking for