Changing Router IP while keeping default Gateway

Hello- I have a Linksys WRT150N Wireless Router. The default (out of the box) IP Address is 192.168.1.1, which is also the default Gateway. I would like to know if it is possible to change the IP address to 192.168.1.2 while keeping the Gateway on 192.168.1.1. The problem I run into is that when I do change the IP to 192.168.1.2, the Gateway also changes to that address. I see it is possible under Automatic Configuration - DHCP to change the IP and the Subnet Mask, but not the Gateway. Any ideas? Thank you
Message Edited by thutter on 05-20-2008 05:36 AM

No it won't be possible for you to do the settings i.e., to change the ip address to 192.168.1.2...better keep in the same & do the settings.

Similar Messages

How can I make Photoshop Cc 2014 my default. I have tried the get info route and it keeps defaulting to PS CS6

I have tried to change the default PS to CC 1014 using "Get Info" changing it to PS CC 2014 and then "change all" And when I press continue it defaults back to PS CS6

What OS are you using. If Windows check your windows register key Photoshop shell sub-keys command for Open and Edit are set to CC 2014 not CC 14.2.1.

WRT350N : how to specify the default gateway?

Hello,
I would like to use my wrt350n as a dhcp server, but want to specify another router as the default gateway.
I have my wrt350n (192.168.1.254) and another modem/router (192.168.1.1). When a client connects to the wrt350n, it automatically receives as default gateway the adress of the wrt350 (192.3168.1.1). I would like to change that to reference the other adress 192.168.1.1.
Thanks for your comments
Raph
Solved!
Go to Solution.

Hello,
Thanks for your answer.
I try to give you more information.
The modem router (bbox2 : 192.168.1.1) is connected to an ethernet port on the WRT350 (192.168.1.254). I would like to desactivate the DHCP server on the bbox2 (because limited to 802.11g), and activate it on the wrt350, to have a wireless network in 802.11n. The problem when I do that, is at the dhcp server, the default gateway returns is always the ip adress of the wrt350 (so no internet access). Nevertheless, I have to specify the ip of the bbox (192.168.1.1) for the internet traffic. I don't find a way to change the value of the default gateway returns by the wrt350. I can set different values for DNS, but not for the gateway.
Actually, I turn on the dhcp server on the bbox and turnoff it on the wrt350, but my wireless spped is limited to 54Mbits (802.11g), and this not annoying for surfing purpose, but annoying when streaming video from my san connected to the wrt350n.
I don't know if it's clear now?
Thanks for your feedback

The Default Gateway Is Not Available / Problem

Hello, I recently purchased this HP Pavileon laptop, and I've been encountering this problem very often (every 2-10 minutes). This problem is getting extremely frustrating as absolutely nobody has been able to provide a fix for this issue.
When the laptop is on battery mode (this does not happen when plugged in); I commonly get disconnected from my wi-fi connection and to fix it, I must run the troubleshooter. This temporarily fixes the issue by resetting the wi-fi adapter.
What I have tried and has not worked:
* Turn off to save power option in the driver settings (in Device Manager) untickets
* Updated drivers
* New power plan
* Tried different drivers
* Complete system restore
The wireless adapter is Realtek RTL 8188EE. Upon running the troubleshooter, this is all the information from the detailed information section:
Windows Network Diagnostics
Publisher details
Issues foundThe default gateway is not available
The default gateway is not availableThe default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Fixed
Reset the "WiFi" adapter
Completed
Investigate router or broadband modem issues
Not run
Issues found
Detection details
6The default gateway is not availableFixed
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Reset the "WiFi" adapterCompleted
This can sometimes resolve an intermittent problem.
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Repair.1.etl Investigate router or broadband modem issuesNot run
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. Once all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back in to the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter WiFi driver information:
Description . . . . . . . . . . : Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Manufacturer . . . . . . . . . : Realtek Semiconductor Corp.
Provider . . . . . . . . . . . : Realtek Semiconductor Corp.
Version . . . . . . . . . . . : 2012.2.827.2013
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem8.inf
Inf File Date . . . . . . . . . : 12 September 2013 10:17:00
Section Name . . . . . . . . . : HP8188ee.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8179&subsys_197d103c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2014-07-24 04:19:49-759
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 0 item(s) total, 0 item(s) displayed
Connection History
Information for Auto Configuration ID 1
List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 100 Yes Matt
List of preferred networks: 1 item(s)
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Information for Connection ID 1
Connection started at: 2014-07-24 04:19:49-759
Auto Configuration ID: 1
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 98-fc-11-88-61-b8
Security and Authentication
Configured security type: WPA2-PSK
Configured encryption type: CCMP(AES)
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: Yes
Multicast key received: Yes
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 34302
Ndis Tx: 32619
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 0
Rx failure: 0
Tx success: 0
Tx failure: 0
Tx retry: 0
Tx multiple retry: 0
Tx max lifetime exceeded: 0
Tx ACK failure: 0
Roaming history: 0 item(s)
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Result of diagnosis: There may be problem
Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Diagnose.0.etl
Other Networking Configuration and LogsFile Name: NetworkConfiguration.cab Collection information Computer Name: LAPTOP Windows Version:6.3Architecture:x64Time:24 July 2014 04:34:47
Windows Network Diagnostics Detects problems with network connectivity. Package Version:1.0Publisher:Microsoft Windows

Run the HP Support Asssitant's Tune up application. There should be a new BIOS available. sp66866
Have you installed the latest Windows 8.1 updates?
Do not install optional video graphics updates.
I was runnning into a similar problem with my HP product loan Envy Spectre 13 TouchSmart Ultrabook until I did the updates. I had upgraded my wireless router to a model with 802.11AC specification.
Invoke the Device Manager and ensure that the box next to Allow this computer to turn off this device to save power is unchecked.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I tried to change my persona and firefox keeps defaulting to my old one before I updated my browser.Is there anyway to change this without uninstalling the whole browser? Because I'd like to keep all my bookmarks and such. Thanks

I uninstalled all other personas besides the default and the one I want and it still goes back to the old persona unless I keep firefox on default. \The desired persona is a sports one and it keeps defaulting to a surfing one.

Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2

Changing default gateway on sbs08

Hello,
I need to change the default gateway on my small business server 2008 from 192.168.1.207 to 192.168.1.208. The server is used for exchange 2007 and pretty much runs our network.
My manager said this is a big job and I need to read up on DNS, MX records and changing SMTP server IP addresses but I cant see what else I would
need to do.
Any help is greatly appreciated!
Thanks!

Hi Nuh,
If you are just looking to change just the gateway IP address, then FOVIA is correct. Just run the Connect to Internet Wizard. For all intensive purposes, your gateway is your firewall or router. Ex. below.
IP Address: 192.168.1.2 <-This is IP address for the server
Subnet: 255.255.255.0
Default Gateway: 192.168.1.207 <- This is the IP address for your gateway, the one that you need to change.
Now, if you manager is asking you to change physically change the gateway(firewall/router) and reconfigfure it and the network, then this "big job" does make sense when dealing DNS, MX records and such. If not, then just run the wizard and you should be
gold.

How can I change default Gateway

I have been able to change the default gateway address with various routers from 192.168.1.1 to 192.168.0.1. The purpose of changeing the gateway is I can connect via a VPN connection to my office. I realized all the router on 1.1 wouldn't connect but all the router on 0.1 could. I was with comcast before.
Now I have several computers (mine and other employee's) who cannot connect to the VPN as they are with verizon and all are on 1.1. The problem is, verizon won't help and they say we need advanced network help and their not willing to assist.
Can anyone help me and does anyone know if it's possible?
Thanks in advance.

Let me just throw in that I have an Actiontec router, not Westell, with FiOS, but I definitely have my router's IP set to 192.168.0.1. DHCP range set to 192.168.0.100 thru .150. All TV functions work, including remote DVR, mutl-room DVR, on-screen caller ID, and widgets.
I haven't needed any Verizon tech support (knock on wood) but if I did, I'd reset to the default values and once tech support was done, restore using a saved config file.

Wrt54g router v 8.2 -no default gateway

i have tried everything and this routher will not work! I travel with it when i come home for the holidays and normaly i have to get some help from someone to figure out how to get the cpu to work along with the wireless. at this point nothing is working. the modem is a westell mo. 6100. all the lights are working and when i plug my laptop into the ethernet cord it works fine. when the modem is pluged into the router and the ethernet cord is pluged from port one to the back of the cpu the cpu says there is an issue with its ip address being the same as something elses. the wireless ssid pops up and i can connect to it with my macbook but the internet does not work at all. I can connect to the router through 192.168.1.1 and have security setup etc. imy mac address shows up in the dhcp clients list.... in the status tab everything looks normal except the default gateway is all zeros.
anybody have any idea what is happening?
i would like to be able to get the net on the cpu as well as wireless at the same time but if i could just get the wireless to atleast work that would be great
Solved!
Go to Solution.

If you are not able to see any Default gateway under the Status Tab, Because your Modem and Router Shares the Same IP address on the Network.... To make your Computers go Online from the Linksys Router... Login to the Linksys Router setup page and below the setup tab change the "Local IP address" to 192.168.2.1 and click on Save Settings... and then you need to Power Cycle your Network.....
Unplug the Power from the Router and and Modem, wait for 30sec and then first plug the power to your Modem and once all the lights are lid on your Modem, then you can plug the power to the Linksys Router..
Now check if you are able to go online from your computer Hardwired to the router.

Best practice to change default gateway for HA-CAM

Hi,
The next week end, i will have a downtime to change it's HA-CAM's default gateway.
My question is, how can i do that?.
This change is not synchronized if i change only from an active cam (service Ip) o it does?
I was thinking on stops services for standby cam, then connect to a service ip, change its default gateway to active cam, then stops services and start them for standby cam and so on...
This is correct or this idea is wrong?
Please, I need suggestions.
Thanks for advance.

Kaylan
If the user vlan is routed on a L3 device before going to either the MPLS router or the firewall you could use PBR on the L3 device (if supported).
But as Reza says, we need more info on your network layout.
Jon

Changing Default Gateway in Zone

I'm alittle confused and embaroused to even post this. But, is there a restriction on changing the default gateway within a Zone? I get told I don't have insufficient privileges if I do it via "route". I even tried using /etc/defaultrouter, but that had no effect. Am I hitting a restriction that I was unaware of?

Local zones are not allowed to change the network
configuration at all; that includes the interface
configuration (ifconfig) and the routing table
(route).
If your local zone is on the same subnet as the global
zone, they can use the same default route (configured
in the global zone). If they're on different subnets,
you can configure two default routes in the global
zone, and each zone will use the correct gateway.
We have an open RFE to be able to set default routes
in the zone configuration. It's unlikely that it'll
make it into Solaris 10 soon though.
Hope this helps,
BlaiseThis sounds like it's independent of zones. I.e. if I only have the global zone and I have eri0 with 192.168.1.5/24 and qfe0 with 10.1.1.10/24 and then have two default gateways 192.168.1.1 and 10.1.1.1, it will pick the appropriate default gateway based on the src ip address of the outbound packet?
If so, is this a new feature in Solaris 10, or do you know if previous versions also have the same behavior? Unfortunately the current available documentation out on docs.sun.com is not very clear on this (and since Solaris 10 is in beta, that's understandable). I've actually run into a couple of situations where this would be quite useful, so it'd be nice to know if I have to wait for Solaris 10 to be released or if its something that can be done today (I have no place to test this unfortunately)

Computers connecting to internet via time capsule are reporting no internet connectivity. PC is reporting default gateway has changed. How to I correct this?

Am having trouble with maintaining a stable wireless network via the Time Capsule. Am running 1 Mac and 3 PC on a Time Capsule wireless in bridge mode connected to a Verizon wireless router. Verizon wireless is turned off and the Time Capsule seems to be staying connected to the Verizon router. When any of the connected computerss goes to stanby, they often report the internet is no longer available. The PCs say the default gateway has changed ans the Mac simply reports the network parameters have changed. What do I need to do to the Time Capsule to stabilize the wireless network?

It is unlikely that the gateway changes.. but anything is possible.. sorry I am not in the US.. is your service adsl or cable?? What sort of lease time does the public IP have? Some cable companies now rotate then on the hour I noticed.. others on about 3months.. but most it is one day.
Track it yourself.. see what gateway address the TC gets and if it is rotating with the IP.
If your client computers are running Mountain Lion.. the plain fact is, they are not particularly stable.
Wireless is worst.. ethernet tends to be ok.. but for instance Laptops updated to Mountain Lion can be pretty flakey.. with the TC.. and it is the combo that is more the issue. People report improvement with clean install of ML. BUT there is still a bug there that causes the ML to be less than fantastic.
I experience it occasionally even with a dlink wireless router.. after a wake from sleep.. the network will drop out and need to be manually connected back.. I have to admit I expect no better from Mountain Lion. I could load Snow Leopard on it and it would drop once every blue moon.. but I got the laptop with ML so I live with it.. !!

FF keeps defaulting to the wrong HTTP proxy server and port. I have to change it every time I attempt to open Firefox? How do I change it for good?

The manual proxy settings keep defaulting to the wrong HTTP and port. This has caused me many hours of anguish. It works fine when I correct the settings but after you log off and then come back it has to be changed again. Is there anyway to fix it? Or can I go back to the previous version because 4 definitely has some issues (other than this one). I could live with it if I had to but I'm not the only one who uses this computer and they don't know how to make the changes. Thanks and I would definitely appreciate an answer.

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

Hi Bill,
Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
I believe I got the answer below:
To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
Router, type the applicable Server name and IP address, and then click OK.
Thank you

[svn:fx-trunk] 8303: This change tries to support legacy usages of StyleManager. setStyleDeclaration() while keeping the new "subject based" internal index of style declarations in sync with selectors.

Revision: 8303
Author:   [email protected]
Date:     2009-06-26 07:50:46 -0700 (Fri, 26 Jun 2009)
Log Message:
This change tries to support legacy usages of StyleManager.setStyleDeclaration() while keeping the new "subject based" internal index of style declarations in sync with selectors. We no longer support the invalid usage of constructing a CSSStyleDeclaration with one selector but re-registering it with StyleManager.setStyleDeclaration with another selector.
QE: Yes, look out for test cases that incorrectly create a CSSStyleDeclaration with a selector AND also use StyleManager.setStyleDeclaration(). I saw one invalid usage in the mustella test file: tests/Managers/StyleManager/AdvancedCSS/mixedSelectors/AdvancedCSS_MixedSelectors, specifically the "CSSStyleDeclaration_CSSSelectorKind_Type_method" test case.
Doc: Yes, please remove any examples that showed a CSSStyleDeclaration being constructed with a "name" as that is incorrect. You only construct these instances with a selector, or nothing.
Reviewer: Glenn
Checkintests: Pass
Bugs:
SDK-21714 - Dynamically created styles are ignored by spark components
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21714
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleManagerImpl.as

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Some clients get Default Gateway assigned from WRT300N while others don't

Two existing desktops, one wired other wireless and existing laptop wireless connects to internet fine.
Trying to add work laptops, they aquire wireless signal, gets DHCP IP address assigned but doesn't connect. Looked at the ipconfig output and shows no default gateway - router IP is set to 192.168.1.1 - with everything default, I did a reset on it.
The existing machines all have default gateway assigned. Only difference I see is work machines are XP pro. Never had problems with work laptops connecting anywhere else.
Any ideas on how to setup so work laptops can connect?
Solved!
Go to Solution.

namralk wrote:
Ethernet adapter VMware Network Adapter VMnet8:
        Connection-specific DNS Suffix . :
        Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8
        Physical Address. . . . . . . . . : 00-50-56-C0-00-08
        Dhcp Enabled. . . . . . . . . . . : No
         IP Address. . . . . . . . . . . . : 192.168.1.1
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
         Default Gateway . . . . . . . . . :
You have configured vmware on your computer to use 192.168.1.1 on the VMnet8 adapter. This means the computer uses 192.168.1.1 itself on that adapter and obviously won't set 192.168.1.1 as default gateway on your wireless adapter because 192.168.1.1 is the computer itself.
Fix your network configuration in vmware. After that a "ipconfig /renew *" or a reboot should obtain a new working lease including the default gateway. Make sure vmware does not use the 192.168.1.0/255.255.255.0 subnet for it's network adapters.

Changing Router IP while keeping default Gateway

Similar Messages

Maybe you are looking for