Changing saplog directory with maxdb

Hi,
I have installed 04s portal server with maxdb in my desktop. I specified, all directories to point to D: during installation. However, saplog directory alone got created in C drive.
It is occupying so much space, that am effectively not able to use my server.
I have specified overwrite mode for log area.
How do i change the saplog directory to point to D drive. Or will deleting the DISKL001 file cause any issues using my portal server. If i manually create a similar structure in my d drive and copy the DISKL001 file, where should i change to reflect the new location of saplog directory?
Thanks
Best Regards
Sumathi

Hi,
   In Log Settings of Configuration tab, there is no option to change the directory where DISK001 is stored. All i can see is three radio options to set Log Mode, Overwrite mode and Activate or Deactivate the Redo Log Management.
   Version of Maxdb manager is 7.6
   Any other option to change the directory
Thanks
Best Regards
Sumathi

Similar Messages

Msg server implementation with change in directory tree strcucture

Hello all,
Our organization is using directory server 5.1 and messaging server5.2.Our company is going for a change of directory tree structure.Can anybody please tell me whether for this change of directory tree structure we will have to again go for a reinstall of our messaging servers.Is there a way by which present messaging servers can be made to operate with new directory server with revamped directory tree structure.We are not going to upgrade to a new version of either directory or messaging server.

The "schema 1" that 6.0 supports is the two tree system.
Schema 2 is single tree. You may be able to go that direction, BUT this road is not well documented. There's really no "schema guide" the way there is for 5.2 and "schema 1".
You can certainly download and install 6.1, and provisioin some test users, and see what it does.
The mailstore has had only minor changes gooing from 5.1 to 5.2 to 6.0 to 6.1, and the server should automatically and invisibly upgrade as you go.
the queue is incompatible, so you will need to clear the queue before you upgrade.

How to change SID on a SAP System with Maxdb ?

Hello,
I've tryed to migrate /clone a productive system from physical to virtual for testing, and it went OK.
Now, i've done the same to another physical machine and SAP 4.6C r3 goes up,as well as the database MaxDB 7.5 on the new machine.
but now i have two problems:
First, the license key: i have to request a new one. i believe that i can do it using https://websmp110.sap-ag.de/licensekey
Second: the SID is the same, as i have clone the system from one side to another. Same OS, same kernel, etc etc etc.
In order to achieve the possibility to transform the new cloned system in a DEV system for my SAP landscape, i must rename the <sid> of my SAP.
I've changed already the SAPSYSTEMNAME = PRD to SAPSYSTEMNAME = DEV, created a new user like "devadm" renamed the directories where i could find "prd" to "dev" and even in the /home/<sid>adm files i've changed everything from PRD to DEV.
However, this have not worked for me. As that did not worked out, made the "cloning" again. And now i' again with the problem of entering the new license key ( i believe i can request it via that webpage mention above) and changing the <sid> of the system.
Is there any sap not where i can see how to change the <sid> / SAPSYSTEMNAME ?
Thank you
my system is a RHEL5 with MaxDB 7.5 64 bits
Filipe

Hi Filipe,
afaik the SID of a SAP instance cannot be changed later on.
But this is not a db-topic - so you're basically asking the wrong people here in the forum.
Perhabs is more suited for this question.
Concerning the licensekey : yes, you will need a new one if you change the hardware or db platform.
KR Lars

Relative path for Download directory folder.I created a firefox profile and i wanted to use this profile in multiple machines.I wanted to use a relative path for download directory with respect to the profile folder.I need this on Linux machines

I have a use case where I need to use different download directories with different firefox profiles.I need to use this profiles in multiple linux machines.
I need to have a relative path to my download directory with respect to the profile folder.
Ex: I have a selenium test which opens a website and downloads it to my machine.I want this downloaded file to go into some specific folder relative to this profile folder.How do I do this??

That is not a practically empty xinitrc - that file only needs one line: exec WM. Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
Is slim involved? Probably. That is the source of many problems. But to start narrowing this down, I have 3 suggestions:
1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
2) at a tty in runlevel 3 use "xinit" instead of "startx". Startx is fine most of the time, but it is essentially just a complex wrapper for xinit. That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult. So for now just use a vanilla 'xinit'.
3) remove dbus-launch from your exec line in xinitrc. This is done by console-kit so it is redundant and potentially problematic. Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them. Just make that line "exec openbox-session"
Edit: adding one more:
4) temporarily switch out openbox-session for openbox. I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
Last edited by Trilby (2012-10-03 17:30:36)

Wireless Toolkit J2ME - changing the directory structure for your projects

When I create a new package in the Sun Java Wireless Toolkit, the toolkit is creating a folder for the application and its subfolders in the following directory:
C:Documents and settings/Owner/j2mewtk/2.5.2/apps/<name_of_project>....
I am trying to change the directory for new and existing projects so that the directory is:
C:WTK2.5.2/apps/<name_of_project>....
The WTK is already installed directly under the C drive (C:WTK2.5.2/ )
Any help would be much appreciated.

I experience the similar problem.
But got success with some mobile models and most of them fail.
I put the following file in the web page.
(test.html, test.jad, test.jar)
Sony Erisson P800, install successful when accessing http://x.x.x.x/test.html, or http://x.x.x.x/test.jar
Nokia 7650, install successful when accessing http://x.x.x.x/test.jar
Nokia 3530 Fail,
Does anyone know how to install java game to Nokia 3530 through Web.

Using Entry&Approval with MAXDB database

Hi all,
I'm trying to use the Entry&Approval module of SSM, but I'm getting into some problems that maybe someone can help me. I'm using SSM7.5 SP6 with MAXDB as my system database.
I already create my PAS database, I create the metric sets, I put some data there, but when I try to load the data into PAS database I get this error in the trace file:
LSS>
LSS> ... WFMDE_SETUP.PRO FOR MAXDB
LSS>
LSS> output REVIEW_LOAD;SAMPLE over
LSS> echo LOADSTARTED
LOADSTARTED
LSS> output off
LSS>
LSS> checkpoint update
LSS> checkpoint freeze
LSS>
LSS> set control WFMDELINK SSM_CB_EA
LSS>
LSS> access lslink
LSLink> connect SSM_CB_EA
LSLink>
LSLink> ... clear the scorecard status table
LSLink> begin
> DELETE FROM CPMS_SCORE_STATUS
> WHERE CPMS_CONTEXT_ID IN (SELECT ID FROM CPMS_CONTEXT
> WHERE CONTEXT_NAME IN (SELECT CONTEXT FROM CPMS_PASUSER
> WHERE UPPER(USEDB) = UPPER('SAMPLE')))
> end
[SAP AG][SQLOD32 DLL][SAP DB] Base table not found;-4004 POS(13) Unknown table name:CPMS_SCORE_STATUS
SQLSTATE: S0002
SQL System code: -4004
LSLink>
LSLink> ... create the LOADALL proc that will run wfmde_load.pro once for each content set
LSLink> begin
> SELECT DISTINCT CPMS_EA_MASTER_ID
> FROM CPMS_EA_DETAIL
> WHERE ID IN
> (
> SELECT DISTINCT CPMS_EA_DETAIL_ID
> FROM CPMS_EA_DATA, CPMS_EA_CUBES
> WHERE CPMS_EA_DATA.CPMS_EA_CUBES_ID = CPMS_EA_CUBES.ID
> AND UPPER(CUBE_NAME) = 'SAMPLE'
> )
> end
[SAP AG][SQLOD32 DLL][SAP DB] Base table not found;-4004 POS(108) Unknown table name:CPMS_EA_DATA
SQLSTATE: S0002
SQL System code: -4004
LSLink>
+LSLink> lss create code = "job 'wfmde_load.pro' '" + CPMS_EA_MASTER_ID + "'"+
LSLink> output proc LOADALL;PIPADMINDEFAULT
LSLink> peek create nohead nonumb
No Fields currently Selected
ACC004:
No Record Has Been Accessed From the Database.
ACC004:
No Record Has Been Accessed From the Database.
CHE FRE
CHE UPD
In PAS I create the linkid ssm_cb_ea pointing to DB3 MAXDB database. I also try for the MAXDB1 database, but the same result
[http://img713.imageshack.us/img713/8611/72008201.jpg]
Looks like some tables are missing !?!?!? Did I do any mistake?
Thanks in advance for all the help
Pedro

Hi Bob,
thanks for your answer.
I believe that in the LSSERVER.ini all the information is correct, because PAS is working fine, except the selects to the MAXDB database. Here it is the LSSERVER.INI
[Windows]
DEFAULTMEMORY=1200000
DBHOME=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\HOME
PAGEDB=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\HOME\PAGEDB
MASTERDB=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\DATA\MASTERDB
LOCKFILE=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\DATA\LSSLOCK
JUICE=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\DATA\JUICE.ENG
TBDB=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\DATA\TBDB.ENG
APLIB=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\DATA\APLIB
LIBDB=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\DATA\APLIB
CGLIB=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\DATA\CGLIB
SMREPORT=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\DATA\SMREPORT
INITIAL=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\DATA\INITIAL
DBPATH=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\InternetPub\Procs;C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\HOME;C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer\DATA
VERSION=940
EDITFULLSCREEN=0
EDITWINXPOS=0
EDITWINYPOS=0
EDITWINWIDTH=0
EDITWINHEIGHT=0
[Server]
SERVERPATH=C:\Program Files (x86)\SAP BusinessObjects\Strategy Management\ApplicationServer
[localhost]
tcp_protocol=winsock
username=pipadmin
password=?
PROTOCOL=TCP
SERVICE=PILOT
CURSOR=LSSCMPTR
And when I said changing between DB's I was meaning the two MAXDB databases that exist on my system. I assume that the E&A stuff is stored in the DB3 (in my case) MAXDB database, no? I just test against the MAXDB1 database to be sure that I was not pointing to the wrong database. And because both are MAXDB databases, the proc's are the same.
Pedro

When changing database directory in lk6.5, no alarms are logged anymore.

When changing database directory in lk6.5, no alarms are logged anymore. Traces are running ok, only any query in MAX concerning alarms, will result in an empty response

Hi Ryan,
I tried many ways. First as you described. Second; delete all databases (with MAX) and start lookout, hoping lk would make al necessary settings.
I tried short path name, long path name. All the same results; database will be made (or manually with Max or automatically by lk), all traces works, only NOT the Alarm logging. (database isn't corrupted, while a query done in MAX don't result in an error, just empty result).
I the meantime I found something;
C:\Documents and Settings\my name\my documents\Databse --> traces works, alarms not
C:\Program Files\National Instruments\Lookout 6.5\Database --> all works
So it seams that specificly "my documents" does'nt work for alarms, just for traces (????)
I also found the following message when trying to export the alarms; "The given Citadel database is not currently configured to log alarms to a relational database." Does this ring a bell?

How can i change the directory permissions?

my xampp htdocs directory does not include me as a user but has Nobody? how can i change the directory permissions because i cannot edit a file?
Thank you

Select the directory, CMD+I, go to the bottom, unlock the lock, and add yourself to the list with R&W permissions.

Sandbox error only when loading URL containing directory with purely numeric name.

This error only occurs under very strange circumstances. We have several clients whose domain names begin with a sequence of digits (e.g. 401blah.com). We have file paths under another server employing directory names derived from these domain names. (e.g. /4/401/...). We employ the same scheme for all domain names, so fooblah.com would utilize directory /f/fooblah/...
Our swf file is embedded in an HTML page which is served up from 401blah.com (name is an example). It attempts to load images from another server (e.g. pictures.foo.com//4/401/...). The pictures.foo.com site has a crossdomain.xml file that permits all domains to access its contents. When the swf at fooblah.com tries to load an image at pictures.foo.com//f/fooblah/... it does so without a hitch. However, when the same swf hosted in an identical page at 401blah.com attempts to access an image at pictures.foo.com//4/401/... it fails with the following error:
Error #2048: Security sandbox violation: http://401blah.com/v8/widgets/generic/image/semantic-slideshow.swf cannot load data from http:/pictures.foo.com/4/401blah/0288/2015daea4046387201f6d2e38e0c1ac6.jpg
Now, I'm using fake names for the domain here in order to obfuscate the customer, but if I substitute in the correct customer name, the URL http:/pictures.foo.com/4/401blah/0288/2015daea4046387201f6d2e38e0c1ac6.jpg does, in fact, access the correct image.
When we use non numeric directory names everything works without a hitch. When we use numeric directory names, despite all info being in its proper place and a proper crossdomain.xm, loading the images in fails.
In fact, according to our net-trace, when we use numeric directory names, pictures.foo.com (fake domain name substituted in for real domain name), flash doesn't even try to look at its crossdomain.xml file (while it does try, and succeeds at doing so, when non numeric directory names are used).
It looks like Flash is doing some kind of test on the URL and making an incorrect determination on it. Any help on this that does not involve changing our directory scheme would be appreciated. I have read all of the relevent documentation and our crossdomain.xml file is set up correctly, so please focus on the behavior visa vi strange treatment of numeric directory names in the URL.

try to write your php code with notepad.
There could be invisible characters when using Dreamweaver or similar softwares.

How to change output directory in Template Builder

Hi,
I'm using XML Publisher 5.5. standalone. When I use the Preview-Function in Template Builder to generate RTF output with MS Word, I want to change the directory in which the generated Files are located. How can I do this?
Mirko

The temp files are in:
\XML Publisher Desktop\Template Builder for Word\tmp
I'm not sure why you need to change the preview directory.
You can also use the system-temp-dir property to change the temp folder for run-time (there should be more info on this in the XMLP User's Guide)
\XML Publisher Desktop\Template Builder for Word\config\xdo example.cfg
Brett

Change project directory for Workshop?

The default project directory for workshop is
C:\bea\weblogic700\samples\workshop\applications. How do I change that.
For example I want my project to be in the directory c:\work\webservices
thx

Yes Raj. That helped, it worked!
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Dave,
You can change the server with which Workshop communicates by modifyingthe
Config directory entry available under the Tools->Preferences->Pathsoption
on the IDE.
In your case the config directory should be c:\
and the domain should be foo.
also make sure you change the port number entry to the one the server infoo
is listening on.
Hope this helps.
Raj Alagumalai
WebLogic Workshop Support
"Dave Remy" <[email protected]> wrote in message
news:[email protected]...
OK. I added a new domain (e.g., foo) and pointed the directory to one
of
my
choosing (c:\foo). Weblogic then created a c:\foo\applications
directory.
Ok, how do I get workshop to use that directory for my development
project(s)? When I start if from my start menu it uses the cgserver
instance and when I create a project it creates it in the samples
application directory.
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Dave,
When you create a project in Workshop, the project will be created
under
the
applications folder of the server with which Workshop is
communicating.
For
every project that you create via Workshop there is a corresponding
fully
exploded web application that is created on the WebLogic Server. This
restricts the ability to have the project reside in a different
location
other than the applications folder.
If you do not want the project to be created in the samples directoryyou
can configure a new domain via the domain configuration wizard. But
the
project would still be under the applications folder of the newdomain.
>>>
Hope this answers your question.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Dave Remy" <[email protected]> wrote in message
news:[email protected]...
The default project directory for workshop is
C:\bea\weblogic700\samples\workshop\applications. How do I change
that.
For example I want my project to be in the directoryc:\work\webservices
thx

Need to change the directory using the java program

hi,
can anyone give me the code to change the directory in the java program by using the system command.
as in C where we use the system call system("cd");
the same way how to do that in java. please help me with that!!!

Please search the forums for "runtime.exec", there are dozens of examples posted.
Although this may not do you any good, since changing the os's directory is not likely to change anything you're using in Java. What are you trying to do?

Change file name with oreilly servlet

I am using oreilly servlet package and I want to change the file name to the file I am uploading, is this possible ?
How ?
Thanks.
here I post the servlet code:
package com.reducativa.sitio.servlets;
* DemoParserUploadServlet.java
* Example servlet to handle file uploads using MultipartParser for
* decoding the incoming multipart/form-data stream
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import com.oreilly.servlet.multipart.*;
public class DemoParserUploadServlet extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
PrintWriter out = response.getWriter();
response.setContentType("text/plain");
out.println("Demo Parser Upload Servlet");
File dir = new File("f:/");
if (! dir.isDirectory()) {
throw new ServletException("Supplied uploadDir " + "f:/ " +
" is invalid");
try {
MultipartParser mp = new MultipartParser(request, 10*1024*1024); // 10MB
Part part;
while ((part = mp.readNextPart()) != null) {
String name = part.getName();
if (part.isParam()) {
// it's a parameter part
ParamPart paramPart = (ParamPart) part;
String value = paramPart.getStringValue();
out.println("param; name=" + name + ", value=" + value);
else if (part.isFile()) {
// it's a file part
FilePart filePart = (FilePart) part;
String fileName = filePart.getFileName();
if (fileName != null) {
// the part actually contained a file
long size = filePart.writeTo(dir);
out.println("file; name=" + name + "; filename=" + fileName +
", filePath=" + filePart.getFilePath() +
", content type=" + filePart.getContentType() +
", size=" + size);
else {
// the field did not contain a file
out.println("file; name=" + name + "; EMPTY");
out.flush();
catch (IOException lEx) {
this.getServletContext().log("error reading or saving file");
}

Hi there,
I am facing the same problem that you have stated in your Feb 26, 2002 10:28 AM message regarding "change file name with oreilly servlet", I would like to change the file name to include a unique identifier upon upload, did you ever find a solution to your problem?
Thanks!
Todd
[email protected]

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck.

Changing saplog directory with maxdb

Similar Messages

Maybe you are looking for