Changing sequence aspect ratio in FCP

My Video/Audio settings were NTSC DV 48k
I had wide screen SD clips in bins of my project
When creating a new sequence and dropping 16X9 SD clip FCP would open a dialogue box asking me:
"For best performance your sequence and external video should be set to the format of the clips you are editing" Change sequence settings to match the clip settings? NO / YES"
I would choose "NO" and have my wide clips letter boxed in 4:3 sequence (I figured it would play on 4:3 TVs with no issues)
However, now I want to change the edited sequence settings from letter boxed 4:3 to wide 16:9, so that the sequence would match the wide native size of the original footage. Any attempt to change sequence setting results in stretched image inside 16X9 canvas window (or the wide screen sequence)
what should I do to have the image conform to sequence's change setting from 4:3 letter boxed to native 16X9

Captain or Michael,
I am stuck with how to pick sequence attributes best suited to mixing standard DV in 4:3 and assets from a SD camcorder in 16:9. Is there a sequence attribute for this? I want the result to vertically letterbox (may not be the right term) the brief bit of 4:3 clips, but have the QT export be 16:9. I am sure I must have a mental block about this, but I have only thus far edited HD 16:9 clips within a single project, and 4:3 exclusively in others.
By the way, I imported the 16:9 clips into an iMovie 09 project, and then added the 4:3 clips, and iMovie 09 seems to crop the tops and bottoms of the 4:3 clips to fill the screen -- not what I really want by preference, but might do on this little quickie project.
Ernie

Similar Messages

Changing seq. aspect ratio: crashes FCP

Hi all,
Despite my best intentions, my project contains sequences with different settings, which is causing problems on export. A quick overview of sequence contents and field dominance settings:
- SEQUENCE FIELD DOMINANCE: NONE
- PSD frame-graphic overlay (FD: None)
- QT titles from Keynote w/ transparency (FD: None)
- regular footage (FD: lower)
These field dom settings are the only ones that allow the titles to render crisply.
Rendering out using Compressor, DVD-90 settings. Some sequences render perfectly, but in others, the titles are jagged & blurry when rendered out. The only difference I can find, is in the sequence aspect ratios.
The sequences that render properly, are set at 720x480 NTSC DV (3:2).
The ones that render jagged/blurry titles, are 720x486 CCIR 601 NTSC (40:27). (These display crisply in FCP Canvas, but render improperly.)
When I change a sequence's aspect ratio to NTSC DV 3:2, I get "Operation Not Allowed," then "Out of memory," then the canvas turns red with the words "Display unavailable. Close and reopen window to restore." Sometimes, I get the beachball and then FCP crashes.
Closing and reopening doesn't help; I still have the red window. Only changing back to CCIR 601 brings the sequence back online.
I have tried creating a new sequence and copy/pasting, but I get "Out of memory" etc.
Can anyone advise??
Thanks very much,
Brett

By default Compressor assumes you're providing a 720x480 media file for compression to DVD. This is because DVD players can display only a 720x480 image.
If you send a 720x486 media file through the default Compressor settings, it will squeeze the image vertically to fit 720x480. It typically does not do this well.
If you suspect this is the problem, duplicate the DVD-90 setting, use the Inspector window and click on the Geometry button, select a Custom crop and crop 2 lines from the top and 4 lines from the bottom (always crop in even numbers for DVD playback). Rename and save the setting.

How can I change the aspect ratio of an image display

I am snapping a sequence of images and using imgPlot to diplay the images. However, due to my camera specifications [it's a Pulnix 9701 with Pixel Size 11.6μm (H) X 13.3μm (V)], the image I get displayed is elongated in the horizontal direction, i.e. if I snap an image of a square, I get a rectangle on my computer display.
How can I change the aspect ratio of the display on my computer? The only parameters I have seen so far just control what portion of the image is acquired or diplayed, but none actually changes the aspect ratio.
Thanks in advance for any help.

If you are using an analog camera, you can set the aspect ratio in MAX. This will correct for non-square pixels.
If you are using a digital camera, I don't think there is a way to fix it during acquisition. You could resample the image to correct the ratios, but that would be a slow, time consuming process.
One other possibility is that your computer monitor is in a mode which is not a standard 4x3 configuration. For example 640x480 and 800x600 are 4:3 ratios. 1200x1024 is not, which tends to distort your displayed images.
Bruce
Bruce Ammons
Ammons Engineering

How do I change the aspect ratio of source video in the event library?

I’ve imported video to iMovie 08 from a Canon Mini DV MD235 video camera. The video is recorded in widescreen format and plays back in widescreen when viewed from the iMovie event library (prior to doing any video editing). However, when I delete rejected frames from any particular video clip in the event library the video clip is automatically pillarboxed (i.e. switched from widescreen to 4:3 format). This squashes the video horizontally, stretches it vertically and leaves vertical black bars to the left and right of the video during playback. This automatic change in aspect ratio is occurring to the source video in the event library.
I’d be grateful for any help / advice on how I can convert the edited clips back to widescreen aspect ratio, so they display in the *event library* as they did when first imported into iMovie.

I don’t really want to clog up my hard drive with unwanted video and it’s easier to edit it from within iMovie.
Have you considered manually importing only portions of the clips you actually plan to use? Or, if you must import the entire clip, have you considered trimming externally in an application like MPEG Streamclip which will allow you to set frame level in/out points and then perform a "Save As..." operation that stores the select range of frames to an MOV file container retaining the proper flag?
Is there anything I can do from within iMovie to activate the 16:9 setting for these as yet unedited clips, so the same pillarboxing doesn’t happen?
Not sure what you mean by "unedited" here. If the files have been destructively split, the flag is gone and there is nothing you can do about it but re-compress. If you mean they are imported but as of yet whole and still contain their flags, then you have two options. The first is to edit non-destrctively within iMovie '08 and the second would be to do the trimming externally.
This second option is really fairly simple. Just close iMovie '08. Open MPEG Streamclip and load a clip you want to trim. Set your in and pout points, select the "Save As..." option, and store the files in the original Events folder with a new name. I would also recommend you perform these trims in their original time sequence so the "creation" date time groups (Finder attributes) are in time order also. When done with the loaded clip either delete it from the "Event" folder or move it to an archival location. When done with the last clip, close MPEG Streamclip, delete the Cache and Thumbnail folders from the Event folder, open iMovie '08 again, and go get a cup of coffee or tea while the files are re-thumbnailing. DO NOT DO THIS TO ANY EVENT WHICH CONTAINS FILES ALREADY USED IN ANY PROJECT. (I.e., this must be done before you start the actual project editing process.)
It seems odd to me that iMovie is doing this.
I suspect that as the application was originally written as an NLE, non-destructive, "by reference" application, the writers/updaters "overlooked" this facet when adding a "destructive" routine and did not provide for checks of this flag nor provide for copying it re-written segments.

Change pixel aspect ratio

Hi all,
My school requires me to produce all my videos in a format of 768px by 576px, square pixels, PAL format. I need to know how to change the pixel aspect ratio to 768x576 with the standard PAL format and square pixels. I can see that when you start a project you can set the size, but the boxes that contain the pixel size are shadowed out and I can't select them to change them. I have also tried to modify the project after it was created, using project settings and sequence settings, but again, I was not able to select the boxes that included the pixel aspect ratio.
Please help soon, as my project is due within hours.

My source material is 768x576 animations from Maya. The output needs to be .avi format, but it's not going onto a DVD or a DV tape or a web video, it just needs to be uploaded to my instructor's computer.
I am trying to export a file with the correct aspect ratio now. I set the output to codec=none, and changed the aspect ratio to 768x576. It seems unable to output the file, as I have tried four times and it has given me an error each time. Is a codec necessary? Is that what's freaking it out?
Also, the final video will only be 2:28 long, and I have set the scratch disk to a drive on my computer that has 78 GB free, so I hope it is not running out of processing space.
Thank you for your help and patience with this problem. I'm not sure I get the reason for the format myself, which is probably why I'm having trouble explaining why this is so important. However, my instructor told us numerous times that we absolutely had to have a final file that was 768x576, so I figured I had to make every effort to get it done that way.

Photoshop Elements 5.0 - won't let me change image aspect ratio. Box is greyed out. Have reinstalled

I've been using Photoshop Elements 5.0 for years. As of today, it won't let me change image aspect ratio. Box is greyed out. Have reinstalled the program with no change

Where in photoshop elements 5 are you seeing the "Box" geyed out?
Or how are you trying to change the image aspect ratio?

IDVD is producing DVDs which chop the edges off my video. I have tried changing the aspect ratio between 4:3 and 16:9 but it hasn't helped. My TV is definitely on the correct settings. How can I solve this?

iDVD is producing DVDs which chop the edges off my video. I have tried changing the aspect ratio between 4:3 and 16:9 but it hasn't helped. My TV is definitely on the correct settings. How can I solve this?

One way to to put the videos into an iDVD slideshow
and set iDVD's Slideshow preferences to always scale slides to TV Safe Area.
However, some users have reported that the audio quality using this method is lessened. I've not noticed it but then I don't have a good ear when it comes to that sort of thing. If you add more than one video in the same slideshow do not select any transition.
OT

Changing photo aspect ratio with QT 7 Pro

Can I use QT 7 Pro to change the aspect ratio of my iPhoto pictures so they can be used in HD video?
David

I guess it would be easyier for me to purchase Graphic Converter to convert all my JPEGs to 16:9 ratio to be used in Final Cut Express.
Again, this depends on what you are looking for in an application. I personally have never used Graphic Converter. If, for instance, it is able to batch process your photos, then it might be worth purchasing if that is what you are primarily interested in. However, any graphic application can change the aspect ratio of your photos—including Preview which, I assume, is already installed on your system. In fact, I recommend you try this work flow with a few sample photos to be sure it is the aspect ratio you really want to change. (I.e., most cameras use a 4:3 or 3:2 aspect ratio and changing the aspect ratio for the frame will introduce a distortion to the photograph subjects.) The more normal approach is to crop the photos to the desired aspect ratio in iPhoto and export the customized photos from iPhoto or import the customized photos directly into the target application.
In any case, simply open one or more photos in Preview, select a photo, open the "Tools>Adjust Size" option, deselect the "Scale proportionately" option, and enter the desired HD dimensions.
Example... This
becomes this...
In this case making the subjects appear fatter than the actually are which usually does not go over well with the women in the picture.

How do I change the aspect ratio on Final Cut Pro X?

Whenever I upload new media (regardless of what ratio it was filmed in) it plays in letterbox format. I would like to change the aspect ratio to 16:9. Thanks.

Please open the clip in the QT player and post a screen shot of the movie inspector. Post a screen **** of what you're seeing in the viewer.
You keep saying upload, do you mean import?

Can I change the aspect ratio of existing projects?

Over the past few years, I created a number of iDVD projects of special occasions. I guess the default aspect ration in the older versions of iDVD was 4:3. I now have a widescreen TV and would like to view these videos in 16:9 mode. The TV can change aspect ratios but it distorts the video. Is there a relatively easy was to redo IDVD projects to change the aspect ratio to widescreen?

The TV can change aspect ratios but it distorts the video. Is there a relatively easy was to redo IDVD projects to change the aspect ratio to widescreen?
Depends on your goals here. You can duplicate what your widescreen TV and do fairly easily but you would still end up with screen distortion if you use the entire 4:3 display area. It is is also reasonably easy to crop your 4:3 aspect to a 16:9 area within the 4:3 viewing area and burn this to a DVD. While this would prevent distortion, part of your viewing area would be lost and the result would be the same as using the the "Zoom" display on your widescreen TV. A third option might be to select a 16:9 viewing area within the original 4:3 display area. Unfortunately, this would would normally require an advanced editing application or cropping and scaling either as a whole or in selected segments. In either case it requires a much greater effort on the part of the user.
In short, actually changing an aspect ratio from is original aspect is either easy but causes distortion or it is difficult and time consuming. Further, in either case you are merely duplicating what your TV can already do. If you don't want distortion, use 16:9 "sourced" (either original or cropped) content. If you want to reduce the distortion (and your particular TV has the option), use the "Justify" viewing option which applies little or no distortion at the center of the viewing area and most distorion towards the left-right edges of the screen. Otherwise learn to live with the distortion and decide whether you prefer the distortion being applied to the DVD or just on the viewing screen.

How can I change the aspect ratio

I connected my new Apple TV 2 to an LCD projector (Epson 9300) using a Belkin HDMI-to-DVI cable. The projector supports a variety of resolutions, but the aspect ratio is fixed at 4:3. The picture is therefore stretched vertically. How can I change the aspect ratio on the Apple TV?

How can I change the aspect ratio on the Apple TV?
You can't. The TV device plays content at the encoded aspect ratio. It is up to your viewing device to alter the display aspect if it can. Your primary options are to use a different viewing device capable of multiple aspect ratios, scaling, and/or zoom effects or you could simply letterbox your content when you encode it.

Camileo S10 - how to change the aspect ratio to 16:9

Does anyone know how to change the aspect ratio when making movies with the arcsoft software included with the S10!!!!!
Won't let me select 16:9 only 4:3!!!
Not sure why as when you play the recording back directly through the telly it does it in 16:9 so I know it's being recorded in the right ratio!!

You cannot change the aspect ratio because you record at full hd 1080. The S10 records in format 1440/1080 at full hd, wich means 4/3. The S10 is not capable to record in full hd at 1920/1080 (this is 16/9 full hd). It is simple:
Camileo S10 record 1440 pixels on horizontal and 1080 pixels on vertical. The aspect ratio is 4/3.
Answer for your question: if you want to see in 16/9 format use HD2 (720p) for recording.
Bye.

How to change custom aspect ratio in Lighroom 5.

I am having trouble changing custom aspect ratio in lightroom 5. I can change it in 3 but it doesnt work in 5?

Custom aspect ratios are just that, ratios. There is no size involved. You control size in the print module or in the export dialogue. There is no provision in Lightroom itself to change the size of the image. Lightroom imports the image taken by the camera and displays all the pixels. Any sizing that you want done is enter your control using either Lightroom features. The original image size cannot be changed.

Color Changing Clip Aspect Ratio When Sent Back To FCP

Color... Love it...BUT...
When I send my sequence from FCP to Color, grade it, then send it back, the aspect ratio of all the clips is changed to 6.67.
I only corrected our new TV shows teaser so I was not to concerned with having to go into the motion tab in FCP to change each clips aspect ratio back to 0. However, I will grade the whole 80 minutes tomorrow and I don't have time to change each clip back.
In color I only change the Primary In.
Did not mess with the geometry.
I have the latest update.
And I have no clue....
Any help would be great.
Peace

Yup,
Like Fearless I find its best to not have FCP do the anamorphic squeeze. I never tag anything as anamorphic and just do it on the monitor. At the end of the project I'll nest into a timeline for output and do the squeeze there.
If everyone on this thread goes from within Color:
Color > Send Color Feedback
Please log this bug. The more of us that complain, the quicker they'll fix it. And this one is a killer.
- pi

FCP 7 Sequence Aspect Ratio Issue

I apologize in advance if I'm using to incorrect terminology.
I've upgraded to FCP 7 and my questions concerns aspect ratio. I've just finished two sequences which are ready for export. When I first started capturing video from my Sony DCR-HC-30. I did notice a warning that came up, something to do with a conflict between the imported video and FCP settings - I selected to have FCP modify the preset to match and imported the video.
My sequence summary is: 720 X 480 frame size, 29.97 fps, pixel aspect ration is NTSC-CCIR601/DV. Under my Sequence setting menu, the sequence is identified as NTSC 720 X 480 NTSC DV (3:2).
My "easy setup" shows the Seq. and Capture preset as DV NTSC 48Khz and the device control as DVCPRO HD Firewire.
All I want is a standard NTSC format to view on a standard NTSC TV, shouldn't the aspect ratio be 4:3?
Thank You

Mr. Holmes,
Thanks for your prompt reply - the information was most valuable. I've been playing around with FCP and Express since version 1 (strictly amateur home stuff, and I can't remember seeing the 3:2 ratio displayed before - probably not paying attention. Good, I'll started the finishing touches and export.
The final product will be going to DVDS Pro, would you recommend using Compressor or Quicktime Conversion? I've always used Compressor in the past, but just read something about (perhaps) just using QT Conversion. If I could bother you with one more question - under the Easy Setup option, sub option "use" shouldn't my setting reflect/show DV-NTSC? Right now it's showing "custom setup."
Thanks again for your response, very much appreciated. Regards.

Changing sequence aspect ratio in FCP

Similar Messages

Maybe you are looking for