Changing SID of the system(Urgent)

Hi Folks,
We had old system with SID (EC1) and recently we installed a system with same SID (EC1). When I want to install the key, its conflicted in service.sap.com. Now I need to change my new system SID. My system was running in MS sql with windows env.
Any one have step by step guide to change the SID (Both SAP system and database) of the system.
Thanks
Regards,
Ral

Well... theres 2 options here...
1.) Reinstall the system with a new sid
2.) Proceed to do a Homogeneous system copy, then change the SID when the new system is deployed.
Regards
Juan
PS... Is the old EC1 system still been used??? if not just remove from SAP Marketplace and create a new system.

Similar Messages

I need to change countries but the system won't allow because of an outstanding 7 cents credit balance. What do I need to do?

I need to change countries but the system won't allow because of an outstanding 7 cents credit balance. What do I need to do?

You can try contacting iTunes Support and ask them if they can remove the balance from your account so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

"Configuration changed. Restart the system" and then reboot on startup.

I have disabled WiMax in BIOS setup and now my x121e doesn't boot at all - just says that "Configuration changed. Restart the system" and reboots. When i press F1 to access bios setup - nothing happens. CMOS reset didn't help/

In service center they said that motherboard is glitchy and needs replacement.
So it was a hardware fault.

O change store but the system will not allowI have left $ 1.42 in my US store

Have $1.42 in my US store
the system will not allow to change
how can i change stores?

You can't change countries whilst you have a balance on your account. If you can't spend it then you can try contacting iTunes support and ask them if they can remove the balance : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Diagnostics Agent installation - which SID for the systems in your landscap

Hi,
I have a question in regads to installing the Diagnostics Agent on the systems in your landscape: ie. I want to install the Diagnostics Agent on all systems, and SAP suggests the system ID "DAA" as standard sid. From my experience there are no errors or exceptions when I use the system id DAA for a few or all systems.
However, will I run into problems later on (for example, when using root cause analysis, etc.)? Can I use the standard system id DAA for several systems/hosts, or should I use a seperate system ID (DAA, DAB, DAC, etc.) for each Diagnostics Agent?
thanks,
Walter

Hi,
We have used same SIDs (the default DAA) for a few hosts in our landscape and this did not cause a problem.
But in my opinion best to use DAA, DAB, DAC etc in order to remove any room for confusion for both the humans and the systems
Regards,
Srikishan

HT1918 Somehow the country associated with my account was changed to China. I did not make this change and now the system will not let me update either my credit card information or the country back to the United States. Help!!!

Somehow the country associated with my account was changed to China. I did not make this change. My credit card information needs to be updated but the system will not let me update either my credit card information or the country back to the United States. My updated credit card information is not accepted because the country is China. It will not allow me to change the country until the credit card information is changed. Help!!!

This exact thing has happened to me. Did you get it resolved? If so, how??

UOM changes automatically inside the system

Hi All,
The UOM is changed automatically inside our system when it sends the PO,
It is sent 1 box=12 pieces but it gets changed to 1 box=36 pieces in the system,
Please help how does this happen and what to do to rectify this.
thanks in advance.

Check you mateial master
additional data- UOM tab that the conversion defined as per your requirements or not?
if every thing is correct here than check the mateirla master change log if some one changed and change back to original or not?
all looks fine than check for the OSS note for you system version.

Change SID of Production System

Hi guys,
Does somebody know if SAP supports the change of the * Production SID *?
Thanks for your help.
Murat

Just to add:
Restrictions to renaming apply for the logical system (Tx BD54) name for your production client. In most cases the logical system contains the (then old) SID. Changing that is not supported in production environments.
Markus

I have a macbook and it is a dual boot system, I would like to be able to see the mac side of the system on a larger monitor. I can hook to a hdmi cable and see the pc side, but not the mac side, any suggestions?

I have a macbook that I bought second hand. The mac has a dual boot system with bootcamp on one side and snow leopard on the other. I would like to be able to hook to a larger hdmi monitor so that in both systems I could see better since on the leopard side the computer has PS4. I have purchased the dvi to HDMI accessory and purchased the HDMI to DVI cable, and can see fine on the bootcamp side, but nothing on the leopard side. Could somebody help me with configuring things so that it will see both side?
Also on a minor note, I need to purchase a new battery for this item and don't know which one to purchase. Any help would be greatly appreciated, especially with the display/monitor issue.
Thanks Sue
ps sorry but the operating system is OS X

When you try to use the Mac side on your external monitor do you get a blank screen or do you see the aurora background?
It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.

Since Monday, Firefox times out when I search the web and I have not changed anything with the system.

I was able to search the web as late as Sunday. But since Monday I am unable to. I have changed nothing. Bookmarks, email, Facebook work. Can search on laptop using the router, so internet connection is fine. The new google search on FB doesn't work either. Nor does searching with Chrome or IE. Have reset Firefox, restarted the computer, restored computer to previous Saturday. All I get when searching is This operation timed out.

I think you must to a clean re-install, this means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

HT5622 I have changed my Apple ID, but when I try to login to iTunes it still shows my old Apple ID thus not allowing me to log in. How do I change this in the system?

How do I change my Apple ID when I go into iTunes. It seems when I log into apple web site it recognizes my new Apple ID, but iTunes does not. How do I change my iTunes Apple ID?

Have you change your apple id on your iphone?
settings - store - apple id - sign out - then log back in with desired id.

How to change SID on a SAP System with Maxdb ?

Hello,
I've tryed to migrate /clone a productive system from physical to virtual for testing, and it went OK.
Now, i've done the same to another physical machine and SAP 4.6C r3 goes up,as well as the database MaxDB 7.5 on the new machine.
but now i have two problems:
First, the license key: i have to request a new one. i believe that i can do it using https://websmp110.sap-ag.de/licensekey
Second: the SID is the same, as i have clone the system from one side to another. Same OS, same kernel, etc etc etc.
In order to achieve the possibility to transform the new cloned system in a DEV system for my SAP landscape, i must rename the <sid> of my SAP.
I've changed already the SAPSYSTEMNAME = PRD to SAPSYSTEMNAME = DEV, created a new user like "devadm" renamed the directories where i could find "prd" to "dev" and even in the /home/<sid>adm files i've changed everything from PRD to DEV.
However, this have not worked for me. As that did not worked out, made the "cloning" again. And now i' again with the problem of entering the new license key ( i believe i can request it via that webpage mention above) and changing the <sid> of the system.
Is there any sap not where i can see how to change the <sid> / SAPSYSTEMNAME ?
Thank you
my system is a RHEL5 with MaxDB 7.5 64 bits
Filipe

Hi Filipe,
afaik the SID of a SAP instance cannot be changed later on.
But this is not a db-topic - so you're basically asking the wrong people here in the forum.
Perhabs is more suited for this question.
Concerning the licensekey : yes, you will need a new one if you change the hardware or db platform.
KR Lars

The system and namespace change option

Hi Experts,
I want to integrate a certain SAP Source System within RSA1. After submitting the correct settings for Background User and RFC connection the process leads me to the Source System where I logon with an User which has authorizations in SM59. From there on (the RFC Connection backwards is already defined) I got asked whether I want to user/check/cancel this existing RFC Connection. I click on use, wait for a while and then the error (please see below) appears.
When proceeding with the steps mentioned in the error message (transaction SE03, Administration node, ...) I cannot find any IDOC Object ZSSA009. I think maybe it's related to some software component or somenthing like that which should be set as "modifiable" but I don't know which....
Any Ideas on this?
Many thanks in advance.
Best regards
Tobias
Error Message:
Message no. TO128
Diagnosis
The system and namespace change option set for this SAP System does not allow any changes to be made to object IDOC ZSSA009.
System Response
Editing is terminated, the object can only be displayed.
Procedure
If you want to edit the object IDOC ZSSA009 in this SAP System, have your system administator set the SAP System to "modifiable" for this object.
This can affect the modifiability of the namespace &1 or the namespaces that correspond to the pattern &1, as well as the global setting of the system change option.
The system change option is set using the Transport Organizer tools (Transaction SE03). Expand the Administration node and execute the program Set system change option. The options are described there.

HI,
Attached link may help you in configuring the source system.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152
Thanks,
Arun

How to change SID during sustem copy

How do we change SID of the sandbox system on which we are going to copy production data, using homogeneous system copy pr.

It is explained in the homogeneous system copy guide. It is not difficult at all but you need to uninstall sandbox system first.

How do I change my short name on Yosemite OS X? I can't seem to do it the way I used to change it all the time on Mavericks.

I can't seem to do it the way I used to change it all the time on Mavericks.
There was a text box after I clicked on the lock after I went to Users and Groups in System Preferences, but now it's gone.
By short name, I mean the name that appears on your lock screen when you log in.
P.S. I use a MacBook Air Early 2014 version, 13-inch.
I upgraded to Yosemite 2 days ago.

I found how to do it.
Go to SystemPreferences - Users&Groups - Right-click on your account at the left hand side bar- change your FULL NAME ONLY
If you change anything else the system might break but changing the full name causes no damage.
So I changed my name and am working fine with my Mac.
Cheers!
mollaturnup

Changing SID of the system(Urgent)

Similar Messages

Maybe you are looking for