Changing SID Windows 7
Hi All,
Can anyone help with this - sorry in advanvce as I am not sure where to post the question!
I need to change the SID on some Windows 7 PC's I was tols about a program called NEWSID but this doesn't work in Windows 7.
Is there any other utility that will do this with ease?
Thanks in advance,
Chris.
Take a look at the following address
http://www.brajkovic.info/windows-server-2008/windows-server-2008-r2/how-to-change-sid-on-windows-7-and-windows-server-2008-r2-using-sysprep/
I also quote a sentence from a Mark Russinovich's post in his blog (http://blogs.technet.com/b/markrussinovich/archive/2009/11/03/3291024.aspx) that says
that "...Sysprep doesn’t support changing the SIDs of computers that have applications installed.": so, pay attention to what you do!
Bye.
Luigi Bruno - Microsoft Community Contributor 2011 Award
Similar Messages
-
Post Processing after Changing SID
Hi,
After following the procedure in:
Change SID
I am able to start msg_server but stuck with the follwing with Java still not starting up.
I wonder about Java instance ID, what happens with the instance ID if the above procedure is followed. I have carefully changed configurations, settings...and am able to logon on ABAP side...but Java being down I cannot release the system properly.
Please advise asto what is still missing in corelation with changing SID in such a way.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid C7Q
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 185
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 5856
Sun May 24 13:05:07 2009
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5856) [dpxxdisp.c 1285]
shared lib "dw_xml.dll" version 185 successfully loaded
shared lib "dw_xtc.dll" version 185 successfully loaded
shared lib "dw_stl.dll" version 185 successfully loaded
shared lib "dw_gui.dll" version 185 successfully loaded
shared lib "dw_mdm.dll" version 185 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun May 24 13:05:11 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: start server >UT1VC7Q01_C7Q_01 <
DpShMCreate: sizeof(wp_adm) 59568 (1752)
DpShMCreate: sizeof(tm_adm) 58861440 (29416)
DpShMCreate: sizeof(wp_ca_adm) 80000 (80)
DpShMCreate: sizeof(appc_ca_adm) 160000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=4000/16/4416064/4416080
DpShMCreate: sizeof(comm_adm) 4416080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
DpShMCreate: sizeof(slock_adm) 156064 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=6600/16/633664/633680
DpShMCreate: sizeof(file_adm) 633680 (72)
DpShMCreate: sizeof(vmc_adm) 61520 (1864)
DpShMCreate: sizeof(wall_adm) (416064/346352/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F0B0050, size: 65199728)
DpShMCreate: allocated sys_adm at 000000000F0B0050
DpShMCreate: allocated wp_adm at 000000000F0B21F0
DpShMCreate: allocated tm_adm_list at 000000000F0C0AA0
DpShMCreate: allocated tm_adm at 000000000F0C0B00
DpShMCreate: allocated wp_ca_adm at 00000000128E3280
DpShMCreate: allocated appc_ca_adm at 00000000128F6B00
DpShMCreate: allocated comm_adm at 000000001291DC00
DpShMCreate: allocated slock_adm at 0000000012D53E50
DpShMCreate: allocated file_adm at 0000000012D79FF0
DpShMCreate: allocated vmc_adm_list at 0000000012E14B40
DpShMCreate: allocated gw_adm at 0000000012E14BC0
DpShMCreate: allocated vmc_adm at 0000000012E14BF0
DpShMCreate: allocated ca_info at 0000000012E23C40
DpShMCreate: allocated wall_adm at 0000000012E23C50
Sun May 24 13:05:12 2009
MBUF state OFF
DpCommInitTable: init table for 4000 entries
DpFileInitTable: init table for 6600 entries
Sun May 24 13:05:13 2009
DpSesCreateTable: created session table at 0000000018FD0050 (len=1434432)
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcInit2: o.k.
Sun May 24 13:05:14 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5088
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:05:15 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1692]
***LOG Q0K=> DpMsAttach, mscon ( UT1VC7Q01) [dpxxdisp.c 12429]
DpStartStopMsg: send start message (myname is >UT1VC7Q01_C7Q_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Sun May 24 13:05:16 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Sun May 24 13:05:22 2009
CCMS: Checking Downtime Configuration of Monitoring Segment.
Sun May 24 13:05:23 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 185
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:06:36 2009
MBUF state ACTIVE
Sun May 24 13:06:37 2009
DpModState: change server state from STARTING to ACTIVE
Sun May 24 13:08:31 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 104
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1619) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5088)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWNRemainder of the log:
Sun May 24 13:08:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3016
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:08:37 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:08:55 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 44
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1780) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3016)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4904
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64998
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:09:28 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 40
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1792) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4904)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4640
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:09:36 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:09:45 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 36
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1802) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4640)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:55 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5920
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:10:03 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 32
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1810) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5920)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:10:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2728
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64995
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:10:23 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 28
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1816) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2728)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:10:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3192
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64994
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:10:37 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:04 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 20
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1824) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3192)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4976
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64993
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:27 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 36
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1836) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4976)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5500
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64992
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:45 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 16
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1851) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5500)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:55 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4304
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64991
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:12:02 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 12
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1857) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4304)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:12:15 2009
DpEnvCheckJ2ee: switch off j2ee start flag
Thank you for your help and time in advance. -
Hello,
In Server 2008, to be able to create new VM using same (copied) VHD, we had to use SYSREP to change SID or 3rd party tools, if we wanted to join it to the same domain, otherwise we got an instability on servers.
How can we change/update SID in server 2012? I can't find SYSPREP nor other tool.
Or maybe we don't need to change SID anymore?
ThanksI belive you don't need to, it's actually just a precaution...
Though, if you are using domains, you might need to opt the server out of the domain, and then join the domain again.
If you are also using it to connect to your own wsus server, you might need to run a registry script with this:
@echo off
Echo Save the batch file "AU_Clean_SID.cmd". This batch file will do the following:
Echo 1. Stop the wuauserv service
Echo 2. Delete the AccountDomainSid registry key (if it exists)
Echo 3. Delete the PingID registry key (if it exists)
Echo 4. Delete the SusClientId registry key (if it exists)
Pause
@echo on
net stop wuauserv
REG DELETE "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate" /v AccountDomainSid /f
REG DELETE "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate" /v PingID /f
REG DELETE "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate" /v SusClientId /f
Pause
net start wuauserv
Just save it as f.ex. Delkeys.reg
And then register it to get updates from wsus server again.
"Real men don't use backups, they post their stuff on public ftp servers, and let the rest of the world make copies" -
How can I change the window size of iTunes on my iMac? Used to be easy before installing Mavericks.
If you want to make the itunes tab so you can see the dock
you press the
esc
button if your in full screen mode
if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
there is another way to get to the normal tab if your in full screen
make the curser go right up to the top of the screen and it will show the apple tab
it will have two arrows facing together highlited in blue
if u tap that it will take you to the normal tab -
Is there a way to change the Windows Update service startup type on Windows Server 2012 R2?
We have a number of newly built 2012 R2 servers that we have HP Operations Manager agent running on that monitors the status of several services and reports if they are "stopped". One of these services is Windows Update. Every day we
get at least one alert saying:
"Service "Windows Update" is not started. Current state is stopped"
Checking the event logs shows that the Windows Update service stops, then a while later it just starts again. Not an error, just an information event.
In Windows 2012 R2 the Windows Update service is set to "Automatic (Trigger Start)", where in previous versions we run (2012/2008R2) it would be set to just "Automatic" or "Automatic (Delayed Start)"
I have come to understand that this behaviour is normal for Windows 2012 R2, and that Trigger Start services by design stop themselves after a period of inactivity. I was unable to find any info on how this works. Our client would like this to
be changed and the Windows Update service stay running all the time, understanding that this impacts performance.
Is there a way to change the Windows Update service in Server 2012 R2 to the old Automatic startup behaviour so that it stays running all the time instead of stopping and starting periodicall? There is no option to do this via the services mmc
gui.
So far I have tried:
Removing the Triggers using the command: sc triggerinfo wuauserv delete
This works temporarily, the service then shows as just Automatic in the services console, however if you restart the server or restart the service it goes right back to being Automatic (Trigger Start).
Any kind of help would be appreciated.This one might help.
Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
since changing to windows 8, I no longer get the options of "no scaling", my paper patterns are printing too small. they printed great before computer change and change to windows 8. no longer have the option of "no scaling". Where can I go to choose that option
Hi AbbyZiva
I understand since updating to Win8 you don't have the "no scaling" option available.
Did you uninstall and reinstall the printer after doing the Windows upgrade?
Here is a url for the drivers for the Photosmart Plus 200.
http://www8.hp.com/us/en/support-search.html?tab=2#/qryterm=photosmart%20plus%20210&searchtype=s-001
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Changed my windows to windows 7 professional and illustrator 8.0 won't setup
What do I have to do to get my laptop to setup my illustrator 8.0 since I changed to windows 7 professional? It says it can't set it up.
Jimmy,
You should be able to install and run AI8 in Windows 7 professional (and 8,1 for that matter).
You will probably need to run the computer in XP mode to install. Here is how:
Install and use Windows XP Mode in Windows 7
To run AI8, you should be able to just run the computer normally and to specify that AI8 is to run in (XP) Compatibility maode, as follows:
1) RightClick the shortcut;
2) Click Properties;
3) Click Compatibility;
4) Tick Run this program in Compatibility mode for, then select XP in the dropdown list;
5) Start AI9.
Otherwise, search for Compatibility in the Windows Help and follow the instructions there. -
Changing OS Windows 8.1 to Windows 8.0 from DVD Windows 8 upgrade.
I have Windows 8.1 as the original OS on this Computer. I was told twice I would be able to change to Windows 8.0 by Microsoft Techs. Two MS Tech have worked to install this program. Doesn't work. It goes to Windows Setup (That
doesn't follow through) I must quickly catch the black screen and change the option to Windows 8.1. What is the Bitlocker and how do I suspend it?I'd ask them here about downgrade rights.
http://answers.microsoft.com/en-us/windows/forum/windows_8?tab=Threads
Also FYI;
http://www.microsoft.com/oem/en/licensing/sblicensing/pages/downgrade_rights.aspx#fbid=q1rtYmE7qhf
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
i want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os from xp to win7 64 bit (i think that is the problem) how can i install and run my photoshop 5.0 le on this system?
Kglad Creative Suite 2 is only applicable to individuals affected by the activation server shut down. A complete list of affected software titles can be found at Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products.
-
HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP
HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP
How do you change the window size for Ebusiness Suite after you log in. Currently it displays at 100% of the screen. I want to set it smaller, at some %I don't know if there is a way to set this. Some user's may prefer different sizes of window, depending on their job duties. For example, we have 170 Systems document management integrated with purchasing and payables so users shrink the Oracle window to fill about 60% of the screen while 170 uses the remaining 40% to display the scanned document.
-
Can anybody advise me what to do as I am having problems opening raw files on CS4 since I have changed to windows 7. I am using a canon mk 5D.
dave nutter wrote:
I am using a canon mk 5D.
Actually, you're not. That's not an accurate description of any of the Canon 5D models.
There are EOS 5D, EOS 5D Mark II, and EOS 5D Mark III models. Which do you have, specifically? Details will matter for this.
If you have a 5D Mark III (three) it's too new and you will not be able to directly open files with Photoshop CS4. You'll either need a newer version of Photoshop or to use the free DNG converter.
-Noel -
How to change main window title of oracle ebs
Hi all,
Kindly tell me how can we change the main title of oracle ebs 11i.
ThanksHello Gloscott,
Welcome to the Aperture discussion forum. Congratulations. You just hijacked a thread. That's bad form for 2 reasons. First, you added a message to a thread called "How to change main window view" which makes it look like you had information to add that thread, and you did not. Second, people who can help you are more likely to read a message that has your problem in the subject than they are to read this message. I.e., you won't get what you want if you ask for something else.
That being said, when you repost your query in a new thread, you'll have to be more specific. A "Frame" is not in the regular Aperture terminology.
nathan
Message was edited by: Mr Endo -
How to Change SID at SAP level
Hi Teachies
I had backup and restored the development system by brtools,
I want to change the SID at SAP level , i have to note to change SID at Databse level .
What are the changes we need to do at SAP level.
ENV : Solaries, oracle 10g , ECC
Thank You
HaroonA SID can´t be "changed", you will need to do a system copy according to
http://service.sap.com/systemcopy
Basically - install the system with a different SID and import the database backup.
It´s not possible to change a SID after installation.
Markus -
Invalid request for a change in window state
Ok...
Creating a JSR168 portlet and it works fine in Pluto, but I get the following when I deploy to P7:
ERROR: Content not available. REASONE: Invalid request for a change in window state
Here is what the portlet is supposed to do:
* Display a form
* User clicks find
* Lookup is performed
* Window state in processAction() method of portlet is changed to MAXIMIZED
* I'm guessing this is where the error is occuring
I also think that for the TableContainer, I have some sort of attribute incorrect having to do with one of the channelsIs values.
I tried toggling them one way or another without any effect.
Suggestions?Ive run into this issue also. I need a way for a portlet to change to its maximized state for the purposes of user registration. Is there anyway this can be done? I know that sun jsp "Providers" which are shown on their example desktop, have some sort of maximized state that they can go into, but im not sure how to use this in a portlet.
There seems to be very inconsistent support between the proprietary sun provider api, and the portlet api. -
I installed the SQL server Express 2008 R2 and then SQL Server Management Studio 2008 R2 . But during the installation, I could not choose the both SQL and windows authentication mode and an error accrued so I did that just with windows authentication mode.
Now, I want to change the windows authentication mode account to the SQL authentication mode but it shows me an error which is you do not have permission (Although I am the administrator in windows), what can I do?
Following steps are the steps that I went but I got an error:
Server properties >> security >> choose the option of SQL Server and Windows Authentication mode
and the error that I got is attached(access is denied)
Can you please help me?You can change the setting after you gain admin rights to your SQL Server. You don't admin rights automatically, you have to explicitly add yourself during the install
Here's a guide on how to (re)gain those rights:
http://v-consult.be/2011/05/26/recover-sa-password-microsoft-sql-server-2008-r2/
Maybe you are looking for
-
(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.
Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints). I have a Macbook Pro and am having difficulty printing documents from 'Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it i
-
Issue Using CreateInsert to Add Row to ADF Table
I am using JDev 11.1.2 and have a pretty simple application. The application contains tabs and each tab displays a page fragment. In each page fragment, I have a panelstretch layout. In the top facet I have a form and in the center facet I have a tab
-
if my iphone 5 have problems , apple is going to change this iphone for a new iphone 5 or 5c 5s?
-
I have posted about a freeze problem days ago and have got no response. I did a search on freeze and I can not beli've how many posts have gone un-answered about these freeze issues. If this is how creative treats there customers then they just lost
-
8mm to CD to imovie6 to DVD. What about the fps?
Old 8mm film was digitized to disk (no details), I ripped the disks with MPEG Streamclip plus the QT plug-in. Next I imported to iMovieHD6 and built the 90 minute,35GB, SDV movie. The questions are: 1. Would the original film have been shot at 23.975