? Changing SMS Alert Behavior
I want to ditch my pager and use SMS alerts sent to my iPhone from my answering service. However, the incoming SMS alerts are 1) too soft, 2) too brief, and 3) only repeat once. I am afraid this will not be sufficiently loud enough to wake me up from a good sleep.
Are there any non-jailbreak options to make the alerts more annoying to ensure I will respond to messages at night?
3) only repeat once
If you have *Settings > Messages > Repeat Alert* set to ON you will be alerted twice more if you ignore a message.
Similar Messages
-
SMS alert - I dont want the name of the sender appearing on the screen
Prior to downloading the recent upgrade, my SMS alert would simply notify me that I had a new text message but would not identify the sender. Now, the sender's names appears on the screen. How can I change my setting so that the sender's name is not visible?
The SMS preview has been changed in the new firmware, see this thread:
http://discussions.apple.com/thread.jspa?threadID=1797569&start=0&tstart=0
So displaying the senders name can't be switched off. But you can forward your wish here:
http://www.apple.com/feedback/iphone.html. -
Pre-Paid SMS alerts and confirmations
Depending on the device being used, Pre-Paid services can receive the following alerts and confirmations:
Pre-Paid service activation alerts
Low credit alerts
Main balance expiry alerts (four days before expiry)
Bonus and Plus Pack low balance alerts
Account deactivation alerts (32 days and eight days before the service is deactivated)
Change of Pre-Paid offer confirmations
Scheduled and automatic recharges
BlackBerry BIS subscription cancellation
Pre-Paid marketing messages
Global roaming alerts
Subscriptions and purchases, including MessageBank
Mandatory service messages
Occasional Telstra service messages
How to opt out of Pre-Paid SMS alerts and confirmations
While you can opt out, we strongly recommend you don't, as alerts and confirmations are a great way to stay on top of your balance and expiry dates.
To opt out, text the word 'stop' to 125 8884. This is a free service. You'll receive a confirmation message, but due to scheduling it may take up to 24 hours for all alerts to stop. Note, mandatory SMS notifications will still be sent.
These may include:
Mandatory confirmation of self-service options, e.g. recharges, change of offer and Plus Pack purchases
Pre-Paid marketing offers with a separate opt out
Mandatory global roaming alerts
MessageBank notifications
Occasional Telstra service messages
If you opt out of Pre-Paid SMS alerts and confirmations, you can still check your balance and expiry dates using your device or online. Find out more about Managing your Pre-Paid service.
To opt in again, call our Pre-Paid customer service team on 125 8880.
Change your contract details
Log in to My Account and edit your 'Personal Details'. Register for My Account to access all your account details in one place, recharge, check your balance, view your usage history, get tax statements and more.
View SMS messages using a mobile broadband device
Using USB devices, messages are sent to the Connection Manager. If you're connected using a Wi-Fi hotspot, access messages on your device at http://m.home
Check your device user manual to learn if it's SMS capable, or follow these steps:
Step 1
Connect your Pre-Paid mobile broadband device
Step 2
Type http://m.home into your browser
Step 3
Click the 'SMS' tab to see if you can view SMS messagesIt doesn't address what I needed help with
I am in Malaysia with Telstra Long Life so I can receive my banking secure code when necessary from St George. However, it never arrives in time, if at all. So basically the service is useless for me and I have wasted $80. What can be going wrong and how can i ensure I receive a bank secure code sms in time that I can use it before the banking website cuts it off?
I also cannot see on the My account page where I can get the online help. I think this should always be in the bottom corner of the page as I have spent ages looking for it - depending where you are on Telstra's site, sometimes it is there and sometimes not. VERY confusing.
Thank you Janet Mills -
Does anyone know how to change the alert sound for texting? Just wondering. Thanks.
rom your desktop application list go to Profile -> Advanced -> highlight the active profile -> click Menu then Edit -> highlight SMS and hit trackball set the following -
Out of holster : Tone
Tune : Select desired tune
Volume : hight/medium/low
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
How to get email and sms alerts in 9i
Hi,
I want to know that is there any method in 9i by which we may get mail and sms alerts whenever anything goes wrong with the database?
ThanxWhy pay for something if you already have it, included in your license?
Only because you have to read documentation to use it?
Oracle will sooner or later include functionality in their monitoring products, they don't include in the RDBMS. In 10g you already rather use the controls than call the PL/SQL Apis directly.
Apart from that: the third party products you seem to promote, usually implement very limited functionality.
Sybrand Bakker
Senior Oracle DBA -
Email and SMS Alerts - Solution Manager - PI and EP
Hi All,
I am trying to do the below scenario.....But somehow i am lost in the process.
I have a three system PI landscape and a Solution Manager. I have included the DEV PI in solution manager for CCMS,the CCMS agents are online and it also reflects in RZ20.
Now the requirement is SOLMAN should send email and sms alerts in below situations which occur in PI system.
1.The ABAP or JAVA engine goes down.
2.One of the filesystem crosses certain predefined limit.
3.Any of the java server node stops working
4.If any critical job gets cancelled in sm37
I am looking at steps on how to define the alert categories, auto reaction methods, also the nodes where i have to assign these auto reaction methods.
I have gone through CCMS documentations, played all sim files and gone through most of the pdf files but i am not able to establish proper steps to do it.
I am Redhat Linux,Oracle 10g, SOLMAN 7 with PI7
Can i extend the same for the EP systems also which are pure Java Stack Systems ?
Also i would like to know if i can send customized alert messages.
Best Regards
RaghuHi Juan,
Thanks for your response.
I am looking at the MTE classes i.e for the above situations which MTE classes are required.
Also i have read in some document that we can send the alerts directly to the email IDs and cell numbers without having to mention them in user masters in SU01. Where to mention these ?
I have my SCOT settings done for email servers.
The process which i had built up in my mind is all mixed up and i am lost where to do which configuration
Best Regards
Raghu -
Email and sms alerts against Quality Notifications
I need to send an e-mail and an sms alert to various people within the organisation and to the respective vendor whenever I create a Quality notification. I also need to attach a copy of the print out of the notification in Smart form alongwith the mail. Please suggest.
Regards
SudhirHi,
You can send the e-mail to all concerned via standard workflow or via using some exits at the time of saving of notification also.
Thanks
SUMIT -
Is there a way to change the alert tone for the find my iphone app?
Is there a way to change the alert tone for the find my iphone app? The one they use from the factory is terrible! I tried it out and could hardly hear it from 5 feet away!
Welcome to the Apple community.
Unfortunately, so far as I am aware you cannot change this tone. I must admit I don't fully understand your problem, I've tried it myself and can hear it from some distance away. -
I changed the alert phrase that usually says, "Excuse me, ____ needs your attention." And I need to change it back. It's cursing at me.
I had changed this a long time ago, so I don't remember how. It was done on an older computer and carried over to my new one. I think it was done through the terminal...See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311 -
Is it possible to exclude single contacts from the mute? For example: I want to hear when I recieve an SMS alert even if I mute my iPhone 4 (I am a fireman).
No iPhone apps have access to the necessary API's to do so...they're all sandboxed.
-
I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
$headers = "MIME-Version: 1.0\n" ;
$headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
$headers .= "X-Priority: 1 (Highest)\n";
$headers .= "X-MSMail-Priority: High\n";
$headers .= "Importance: High\n";
// Additional headers
$headers .= 'From: Rakesh <[email protected]>' . "\r\n";
foreach($disemail as $email)
$to = $email;
$subject = $succMessage['email_subject'];
$message = $smsText;
mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
$smsText = utf8_encode($smsText);i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
would like to have your thoughts though.
$headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n format=flowed Content-Transfer-Encoding: quoted-printable"; -
The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?
If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad. -
My iphone calendar keeps changing the alert and second alert times I put in
Ever since updating to 7.0.2, my Iphone calendar keeps changing the alert and second alert times I input for an event to different times. Why is it doing this and how can I fix it?
Are you syncing your phone with iTunes and then with iCloud? This can cause duplicates. Sync with one or the other, but not both.
-
In my iph 4S SMS alert tones keep stammering
In my iph 4S SMS alert tones keep stammering
Hi,
FYI, every tone will ring soft to loud meaning the volume will climb up every second. This is to avoid daze when using it in public places. -
Hi All,
Most of the time the file prosessed in XI with high priority, so any processing error i got a mail but i need to implement the SMS alert for this, So as for quick responce. So what is the best way i can achive that.
I have read most of the forum but this seems that i have to be a member for sending the mail as SMS, but is there any way i can achive this with free just by cnfiguring anythings.???
Thanks in Advance,
JAYhI,
Alert Configuration
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
rEGARDS
Edited by: Hari Kishore Gundala on Mar 11, 2008 10:48 AM
Maybe you are looking for
-
Unable to get the JDBC from context
Dear experts I am new to Sun Application Server and I am trying hard to get the JDBC/ JMS connection factory via context factory. I tried two ways, one is the method in the development guide to get troough IIOP connection Properties lProps = new Prop
-
how do i authaurize my computer to download music from itunes?????
-
I've tried downloading the lastest version of itunes several times using all the different suggestions on the trouble shooting page. I keep recieving a message saying there may have been a network error, a problem with the CD-rom, or the file may be
-
WebServer needs restart if Oracle DB is down.
We are developing an Java Server Pages (JSP) Application. We are using Oracle Thin driver for connecting to Oracle 7.3.3 Database thru' JSP. When there are people logged on to the JSP application and I reboot the ORACLE DB Server, our JSP Engine hang
-
Running two versions of iLife and keeping iMovie 6
Actually two questions. Is it possible to keep iLife 08 and also install Life 09 in the same computer. And MOST importantly if I install the iLife09 package will I loose iMovie 06 which I have used so much and have so much material I am working on?