Changing sshd port and firewall

I edited sshd config file to use another port. The firewall still has port 22 listening and not the new port. How do I get the firewall to let sshd listen on the new port and close 22. Thanks.

I found the answer. You need alter the ssh port in /etc/services.

Similar Messages

Dynamic ports and firewall?

Hello:
I'm running a firewall and want to back it up using OSB. I'm trying to find out the range of dynamic ports that OSB uses (in addition to 400 and 10000) so I can open them up.
I can't find it anywhere in the documentation. I only find this reference as part of the Windows installation section:
If your Windows host is protected by a firewall, the firewall must be configured to permit Oracle >Secure Backup daemons on the host to communicate with the other hosts in your administrative >domain. Oracle Secure Backup includes daemon components that listen on ports 400 and 10000, >as well as other dynamically assigned portsWe can allow full access from our backup server to all ports on the firewall, but that is NOT a preferred solution! :-)
Thanks!

The range of port numbers should be above 20,000 but below 32,000 (ie 20,000 - 20,024) in addition to ports 400 and 10000.
The number of ports needed is calculated by multiplying the # of concurrent OSB activities by 5. Or, by the # of tape drives (inside the firewall) and the # of clients (outside the firewall).
Steps:
1) On Firewall, open desired range of ports plus 400 and 10000.
2) Edit the /etc/services file on both the admin host and the client to use:
ob-daemon-low <port low #>/tcp
ob-daemon-high <port high #>/tcp
These parameters are based on ports you select for OSB (from step #1 above).

Problems with server license ports and firewall in 2005 B

I found problem in 2005 B related license server.
The customer wants to use the windows firewall for security issues and opened TCP/IP and UDP port for 30000.
Also The customer is using NAT(Network Address Translation) for mapping internal IP and outdoor IP.
But customer got a error message can't access license server.
I heard about 2005 A SP01 had similar problem.
If you have relevant experience please let me know your opinion.

Hi,
Theory says that license service´s new approach using CORBA is better becouse it only uses port 30000 for licencing issues... but in our case this wasn´t true becouse it does use some virtual ports. Due to this, we had to disable windows firewall on the server in order to make SBO work. As the other virtual port are asigned in runtime, you cant use the firewalls exceptions (not even the application ones).
What we firstly do was use a net tool to identify which virtual ports was using, and add them to the exceptions. But as you can guess, this only works untill the license server is restarted.
SAP told us that the firewall couldn´t be on the license server machine. The customer wasn´t very pleased, but that´s what we finally do. We didn´t find any other option.
Regards,
Ibai

My provider changed to pop3 port 995 incoming and port 465 outgoing. Now it no longer works. I went into the Thunderbird 28 beta and changed the ports

I have Thunderbird 28 beta. After changing the ports, I no longer receive mail and this is the error message going out:
Sending of message failed.
The message could not be sent because the connection to SMTP server mail.3dcartstores.com timed out. Try again or contact your network administrator.
Passwords have not been changed and I have to login on the web

What are the exact instructions from your email provider?
Please post your Troubleshooting Information.
AppMenu button - Help - Troubleshooting Information

Can't change printer port on Windows 8.1 and Server 2012 R2

1. Install "Lexmark X646e Class Driver" using a in-box print driver (i.e. one comes with the Windows installation base) .
2. Go to "Printer properties" -> "Port"
3. Select a custom monitor port, and the following error occurs in Event Viewer.
An error occurred while configuring print queue 'Lexmark X646e Class Driver'. Printer driver 'Lexmark X646e Class Driver' may not be used in conjunction with a non-inbox port monitor.
Same steps applied on Windows 8 and Server 2012, and not issues found. The restriction/limitation is newly added in Window 8.1 and Server 2012 R2.
Changing to a custom monitor port after printer driver installation is very important for us.
How can we solve or workaround the above issue, so it can behave like Windows 8 and Server 2012?

What Port Monitor just so I can bubble this information to some others?
Alan Morris Windows Printing Team
Hi Alan:
We developed a custom printing system, which involved the following configurations:
1. Create a custom port monitor on server 2012 r2.
2. Change an existing print queue to use this custom port monitor, and share this print queue.
3. All workstations will print to this shared print queue on the server.
The goal is to manage/monitor the print information in StartDocPort for all printing for instance. This is what we've been doing for a long time.
Now we upgraded our system from server 2012 to server 2012 R2, but we can't change the port monitor to our ones anymore.
I've tried the Type3 printer driver, such as Brother Color Type3 Class Driver, unfortunately it didn't work if the installation is using "Add a printer", and select the driver from the list.
The only way to make it work is to install the printer driver using the one downloaded from the vendor's website, this will bypass Windows "Add a printer".
Is there any chance we can make this to behave like server 2012 or earlier? Modify registry keys?
Cheers
Steven

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Hi the_mad_movies,
It seems like this article will be the best option for addressing this issue:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Ports and IPs to be open/permitted in firewall to download and work in creative cloud

What is the complete list of ports and IP addresses to be open/permited in our enterprise firewall in order to let internal PCs download and work with creative cloud applications?

Our firewall only supports IP configuration (not URL). Do you have IP list?
From: Rajshree [email protected]
Sent: miércoles, 06 de noviembre de 2013 17:23
To: Simon, Mariano
Subject: Ports and IPs to be open/permitted in firewall to download and work in creative cloud
Re: Ports and IPs to be open/permitted in firewall to download and work in creative cloud
created by Rajshree <http://forums.adobe.com/people/Rajshree> in Adobe Creative Cloud - View the full discussion <http://forums.adobe.com/message/5819892#5819892

I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying. It would appear to be a problem with outgoing server and I have changed the port number but with no success.

I have just purchased an i pad 2 and am having trouble with the e-mail set up. Set up with wi-fi, i-cloud etc has worked fine but the i pad is recognising my outlook 2007 account details but is not verifying it. The trouble appears to be with the outgoing server and I have tried changing the port number, but to no avail! Also reset the account settings for holding messages on the server...help! As you can tell I'm not very techy and I'm desperate to get the bloody thing working as I'm going away on Tuesday! Any suggestions?

I had a similar issue and it was password case sensitive issue

Change/Configure Host and Port for the Web Service Proxy with Server

Hi,
Is there a way to configure Host and Port in generated proxy for Web service depending upon server. (ADF 11g)
Scenario:
We are consuming Credit Card web service from a service provider and have different Host and Port details for development, QA and Prod.
So we created proxy classes using wsdl for development and things work fine, but when deploying code to QA or Prod we need to change the Host
and Port details.
Is their a way we could user variable's for Host and Port which looks to some configuration file to evaluate their values
based on server.
I am a bit new to this web service .. will appreciate if someone could provide an example.
Thanks.

Are you using Web Service Proxy or Web Service Data Control?
If you are using Web Service Proxy. Right click on your Proxy --> Properties --> Port Endpoints. Here you can change the IP & Port details for each port.
Venkat

How to view and change SMTP port number in new account setup in "Mail" 10.6

When I try to set up and test a new email account addressing an SMTP server that seems to e using a nn-standard port number, how on earth can I even look at the port number assigned by default to a new account in Apple Mail 10.6 setup ?
I might have to trial and error different port numbers but when Mail tries to test the connection to the SMTP server after I enter its address, it just spins and hangs up. I suspect the reason is a wrong port number. How do I change that outgoing port number in Apple Mail ??
There seems to be no obvious way the program will let U do it or even let you view the port it assigns in apparent error.

there is no way to change the smtp port during the original account creation. you can usually wait Mail out if it's spinning its wheels at this point. I've had to wait about 15-20 minutes a few times. eventually Mail lets you through even if it fails to connect to the smtp server. then, once the account is created you can edit the smtp server and try a few different ports and settings. that's done in system preferences->accounts. click on teh smtp server at the bottom and select 'edit smtp server list". then in the popup click "advanced".

Changing IP Address and ports in Directory Server 5.1 SP 4 and 5.2 SP4

I have installed multiple instance of Sun Directory Server 5.1 and 5.2 on ports 389 and 390,now I want to change the IP Address and ports, I am able to change the directory server port from 389 by editing the dse.ldif file, now I want to change the port 390 and the IP address same as directory server, can someone expert from the forum guide me.
Thanks in Advance.
Mukesh Kumar

1) I don't know what you've typed in when installing... but I've never seen that message. Are you using any language specific characters ?
Do you get the error after this screen ?
<b>
The suffix is the root of your directory tree. You may have more than
one suffix.
Suffix [dc=sun,dc=com]:
</b>
If yes, then this means that the value you typed in is not a valid DN... and you must enter a valid one.
2)The Directory Server is installed under /usr/iplanet but the database is under /var/iplanet/ds5 and configuration is under /etc/iplanet/ds5 ...
You can use symbolic links if you want to move things around.
3) You mean you downloaded the tar.gx file of iDS 5.1 and install it on Solaris 9... No problem, I do this every day. As long as you have right to create directories and files, you should be able to install as anyone. If not, you should install as root and then let the server run as a special user.
4) Solaris 9 comes with iDS5.1 packages already installed. But the server is not configured at all.
Running directoryserver setup allows you to configure it and create the database, accounts...
Running directoryserver uninstall remove the instance of the installed database... It doesn't remove the packages. You can start again a setup...
By the way, I think that iDS 5.1 on Solaris 9 comes with the full documentation... May be you should start by reading it.
Regards,
Ludovic.

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again.

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

Exchange 2010 Required Communication (Firewall Ports and Protocols)

Forgive me if this question has been asked before, but a search did not give me much on my scenario.
We currently have one Forest with multiple Domains and Child Domains. We have two departments that have Exchange 2010 running and control their own individual users and mailboxes inside their Domains. These two Exchange servers communicate with each other
just fine.
We now have a department (another domain) that needs control of their own Exchange 2010 server, but here is the catch. They are behind a Firewall. My question is, what Ports and Protocols do I need opened for the Exchange server behind the Firewall to properly
communicate to the two other Exchange servers knowing that the Exchange Environment is a Forest wide activity.
At this point in time, we cannot get Exchange installed as the prereq check fails with an error that we need to prep the AD schema for Exchange, but we know this has been done since we have to other servers in the Forest.
Perhaps we need ports not only opened to the two other exchange servers, but also the Forest Root controller?
Any help is appreciated.

Exchange needs to be able to fully access all other Exchange servers, Active Directory Domain Controllers, and Active Directory Global Catalogs. Additionally, if I remember correctly, there was a blog from the Exchange team a couple of years ago that said
Exchange wasn't supported with firewalls between the various Exchange servers in the environment.
I will ask one question - why aren't you centralizing your Exchange management and servers, and granting rights to these groups for their mailbox management (based on an Organizational Unit that their accounts are in, and granted at the Active Directory
level)? You would no longer have this issue each time another group decides they want to host their own Exchange system.

Change the ike and NAT-T port

I would like to change the ike and NAT-T port from UDP 500 and 4500 to 505 and 4505
Is it possible to do that. This is because i already port forward udp 500 and 4500 to another router (Router B)
This router B will setup a VPN to remote site.

click settings on the phone, click store, click Apple ID: [email protected], select sign out, then sign in with the new ID

Changing sshd port and firewall

Similar Messages

Maybe you are looking for