Changing status of Task created by system in Notification.

I am facing a problem while changing status of "Task" in Notification to "Complete". Actually I want that if system is cretating a Task automatically in Notification, this Task should have status "Complete" instead of release.
For this to happen I did some settings but after that system is giving me arror as shown in below.
If any body has faced simmilar situation, pl. give some clue.
Object does not exist (status management)
Message no. IM258
Diagnosis
This refers to an error in central status management.
Task status
The central status management connection at task level will only be supported from Release 3.0.
For this reason, no task status is available for statuses created before changing to Release 3.0, and status change is therefore also not possible.
Procedure
In the case of task statuses of notifications in releases prior to 3.0:
When you save a notification you can create a status for the tasks.
In the case of notification or task statuses for notifications from Release 3.0:
Please refer to your system administrator.

Hello Satyender,
if you try to change the status of a task this will lead to the described behaviour, this SAP standard.
Sorry that I can give you no solution in this case.
Regards,
Isabelle

Similar Messages

Change status of PO created from Bid response

Hi,
Can anyone let me know - which BADI or IMG Setting can be used to change the PO status to customized user status while creating Purchase Order from Bid Response accepted from a vendor ?
Regards,
Rajeshree

Hi All,
I tried using the SPRO settings for creating status profile with all user defined statuses and then attached this status profile to the transaction type for BUS2201 (PO) but it does not work. PO always shows awaiting approval status.
Do we have to implement a BADI in this case ?? please suggest...something.
BR,
Rajeshree

Rstrui.exe Create a system restore point on windows server 8 standard

Hi,
Before making system changes, I need to create a system restore point on windows server 2008 Standard with SP2 installed., I found where to accomplish that via the UI, but the file isn't found when I search the C:\windows directory on the server.
The executable should be C:\windows\system32\rstrui.exe, unless it was changed for Server 2008. I have system protection turned on for the C: drive.This problem also exists on Windows server R2 enterprise with all updates applied.
I searched the install media (DVD) it wasn't there. I tried the full name (rstrui.exe) as well as truncated versions. I've searched on all of the applicable forums for rstrui.exe and "create system restore point".
Does someone know where I can get rstrui.exe for windows server 8. It's not available on windows server R2 enterprise or essentials either. If there is an alternative method of creating restore points on windows server 8, please point me in the
correct direction. Is it available in any of the variations of windows server 12. I have all of the updates installed when checking for how to create a system restore point or with searching for rstrui.exe. BTW, performing "system backups" or implementing
"previous versions" functionality work just fine.
Thank you in advance,
Steve

Hi Steve,
I replied the same question you posted earlier:
https://social.technet.microsoft.com/Forums/en-US/68352496-2fe8-4320-8848-f22d0d1a6f6b/rstruiexe-missing-unable-to-create-restore-point-windows-server-8-std-r2?forum=windowsbackup
To me it seems that the function is removed in both Windows 2008 SP2 and Windows 2008 R2. Here is my original reply:
I did not find this file either on my new-installed Windows 2008 SP2 system. I assume it is retired in Windows Server 2008 and the function is replaced by Windows Server Backup. I cannot confirm why there is still an option in MSCONFIG which point to
rstrui.exe but I can find the file nowhere. Also this option is removed in Windows Server 2008 R2.
Here link a link for using Windows Server Backup to create system state backup as a restore point:
Recover
the System State
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Not able to change status after creating revision

Hi All,
I am not able to change status of the document after creating revision.
Here are the steps I am doing:
Set
- I assign the change number to the document.
- Now, I open the document in cv02n and change the status.
- New revision is created with revision level 01.
Now I want to change the status of the document to the next status according to status network but its not happening. Would you please provide your valuable suggestions.
Regards
Vidit

Hi Vidit,
based on your description I've tested the behaviour on our test system and I would kindly tell you that the behaviour you are facing is the standard. The mentioned error message are raised because, since the Change Order is released, the DIR remains locked and you will not be able to make any changes to the DIR, including the status.If this DIR was not associated to the Change Order(which is released),you could have made changes to the document status.
Please note that status change with 'Change Master Without Release Key' is possible to change the status but with 'Engineering Change Order with Release Key' it's not. I hope this information will help you.
Best regards,
Christoph

BADI CRM_MKTPL and Status Change button! (Hide the standard system status)

Hello,
In transaction CRM_MKTPL, i need to delete some status that appears when i click on button Change status.
I am trying to use the BADI: CRM_MKTPL using the method 'GET_DROPDOWNBOX_VALUE', but i didn't get what i
want because this method is only valid (i think) for Listboxes for a field and not for a button, that is my
requirement.
Also i am trying to use the method 'p_fill_dropdown_listbox', but i don't know how to use this, and where, in
whick part of the BADI CRM_MKTPL.
I want to hide the standard system status in the dropdown list.
Any ideas?
Thanks in advance
Best regards
Message was edited by:
yukimai maio

just check in your badi there is any option is there for menu area customization or not in the implementation you can find attribute,interface ,subscreen like tab there check any menu area tab is there or not.. if it is not there then try for any menu exit and lastly you can try for transaction variant tcode SHD0.
regards
shiba dutta

Change User status of Task of Follow up function

Hi All,
Does any one of you know how to change the User status of Task through customizing or programming.
Basically I want to change User status from 'TINI' to 'TSNT' once the email is triggered. I could send the email but I am unable to change the status.
Thanks in advance,
Jagadish

Hey Thomas,
This should solve your problem..
CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN'
      EXPORTING
        client              = sy-mandt
        objnr               = wa_new_user_status-guid
        user_status         = wa_new_user_status-status
        no_check            = 'X'
SET_INACT                 = ' '
SET_CHGKZ                 =
XNOAUTO                   =
      EXCEPTIONS
        object_not_found    = 1
        status_inconsistent = 2
        status_not_allowed = 3
        OTHERS              = 4.
In this FM NO_CHECK parmeter must be set to True, else u wil not be able to set the Status.....
Sample is given above...
Reward points for usefull answer...
Regards,
Anand...

Function to change status of the STS (Status and Tracking System)

Hi experts,
do you know a way to execute a function that changes status in the STS hierarchy?
We have a web interface with a BPS layout in it, and want to change the status of the STS according to the legal entity that has been changed as soon as a user clicks on a button.
Do you know a way (function or sth else) to do that?
Any hint will be greatly appreciated!
Thanks in advance,
Thomas

Have a look to these badis: CRM_ORDER_AUTH_CHECK (for authorization purposes), and CRM_ORDER_SAVE (To check the changes at save).

Change status profile of Service order

Hi,
we like to harmonize all status profile of all incident process types we have in our system. This means we like to create one status profile and assign this to 5 different process types. The problem is, we have in our system round about 20000 incidents and ( open and closed). This incidents have to be migrated. I think we have to change E-Status and Status profile and change documents. Are there any experiences with this task. I found nothing what really works (change status profile) in this time. I checked CRM_STATUS_PROFILE_CHANGE but dosn't work for me.
Could anyone give some hints how to handle this problem?
Kind regards Stefan

Hi Stefan,
You can try the below code to change the status and status profile
ls_status_com-ref_guid = lv_guid."document guid
        ls_status_com-ref_kind = 'A'.
        ls_status_com-user_stat_proc = 'CRMACTIV'. " status profile
        ls_status_com-activate = 'X'.
        APPEND ls_status_com TO lt_status_com.
        ls_input_fields-ref_guid = ls_status_com-ref_guid.
        ls_input_fields-ref_kind = 'A'.
        ls_input_fields-objectname = 'STATUS'.
        CONCATENATE ls_status_com-status ls_status_com-user_stat_proc INTO ls_input_fields-logical_key.
        ls_fieldname-fieldname = 'ACTIVATE'.
        INSERT ls_fieldname INTO TABLE ls_input_fields-field_names.
        INSERT ls_input_fields INTO TABLE lt_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        EXPORTING
          it_status         = lt_status_com
        CHANGING
          ct_input_fields   = lt_input_fields
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
      IF sy-subrc EQ 0.
        INSERT lv_guid INTO TABLE lt_guids.
        CALL FUNCTION 'CRM_ORDER_SAVE'
          EXPORTING
            it_objects_to_save = lt_guids
          EXCEPTIONS
            document_not_saved = 1
            OTHERS             = 2.
        IF sy-subrc IS INITIAL.
          COMMIT WORK AND WAIT.
     endif.
Best Regards,
Dharmakasi

Authorization for user in ECC while creating source system in RSA1 in BW

Hello All..
We are trying to create source system from BW(7.0) system using transaction code rsa1 to R/3 Production server.
After providing details in RSA1->Source system ; Remote logon screen of Production server pops up ...and ask to login thru admistrator Id..
To achieve the above task,, what authorization user should have in R/3 system..
Thanks

Hi,
Hope you are using the RFCUSER with these profile SAP_ALL , SAP_NEW , S_BI-WX_RFC in SAP ECC. Please create the RFCUSER with above profiles in ECC and BW (SAP_ALL , SAP_NEW and S_BI-WHM_RFC).
Pls follow the below steps for source system connection
In ECC side
1.) Client administration SCC4 ( select your client and allow changes to repository and cross client customizing)
2.) Define a logical system in ECC
3.) Assign a logical system in ECC
4.) Creating RFC user with system user type and give these profiles SAP_ALL, SAP_NEW, S_BI-WX_RFC
In SAP BI Side
1.) Client administration SCC4 ( select your client and allow changes to repository and cross client customizing)
2.) Define a logical system
3.) Assign a logical system
4.) Creating RFC user with system user type and give these profiles SAP_ALL, SAP_NEW, S_BI-WHM_RFC)
5.) Define RFC user as default (Click RSA1> Global Settings/Customizing dialog box> Glob. Settings)
Connection of SAP BI with ECC
RSA1> Source System>SAP>create>Enter the below entries
Target computer (server) Server of the SAP ECC
System ID System ID of the SAP ECC
System number System number of the SAP ECC
Background user in source system RFCUSER
Password for source system Password
Background user in BW RFCUSER (can not be changed in this activity)
Password for BW user Password
Select unicode in RFC destination and don't select the checkbox in logic screen.
On the dialog box Please log on as an basis administrator in the following screen choose Continue.
Log on to the Source System with your administrator user. Choose the correct client.
On the Replicate Metadata dialog box, choose Only Activate.
Make sure ECC client will allow changes in cross customizing client. It is one time activity once success then deselect the entry.
Hope this will help you to connect the system.
Rgs,
Ambuj Kathuria

WHEN I CREATE SOURCE SYSTEM IN BW

Hi,
When i create source system in BW it is automatically saying that it has
RFC Destination already exists in the source system. Do you want to transfer,check this
destination or cancel the source system?
it has three option copy,check,cancel
i have done check, copy..it says
RFC CONNECTION CHECK FAILED.CHECK CONNECTION.
Please help

Hi,
1. Check for parameters specified .e.g. password. user name , authorization for the user , ip address etc.
2. While creating source system 1st time in the BW , R/3 client should be open and its status should be changes allowed
.(SCC4-> Double click the client ->
Changes to transport & client specific setting
Changes without automatic Recording
Cross Client object changes
Changes to repo. client ind. object allowed
Hope that helps.
Regards
Mr Kapadia

Task: Create Standby DatabaseFailed

Hi,
I am creating a physical standby database using grid control. I first have grid control do a backup, one that can be used later for standby creation, then I ftp those files to the standby host.
After the files are there, I go back to grid control and create the standby using files from previous backup (now located on the standby host). Everything seems OK, the process starts, then fails on the step below.
Task: Create Standby Database Failed
Step: sourceCloningPreparation
Succeeded
Step: createControlFile
Succeeded
Step: destDirCreation
Succeeded
Step: copyInitPasswdFiles
Succeeded
Step: copyControlFile
Succeeded
Step: destCloningPreparation
Failed
If I follow the link I see the output below. What do I need to fix? Is there another logfile somewhere that gives more information?
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-MAY-2008 15:50:10
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=TestBox)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 21-APR-2008 15:44:25
Uptime 16 days 0 hr. 5 min. 50 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File G:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Listener Log File G:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=TestBox)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "WRsite2_DGMGRL" has 1 instance(s).
Instance "WRdg2", status UNKNOWN, has 1 handler(s) for this service...
Service "emrep.systems.de.ittind.com" has 1 instance(s).
Instance "emrep", status READY, has 1 handler(s) for this service...
Service "emrep_XPT.systems.de.ittind.com" has 1 instance(s).
Instance "emrep", status READY, has 1 handler(s) for this service...
Service "site2_DGMGRL" has 1 instance(s).
Instance "dg2", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-MAY-2008 15:50:11
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=TestBox)(PORT=1521)))
The command completed successfully
THANKS,
JOE

Any luck figuring this out?
I am encountering similar problem - except I am using the option on the clone to let the job do the copying directly from the directories where the backup is saved.
The strange thing is that the step fails - but there are no error messages in the step at all - just successful status received from the listener - is there something in the listener's status that it doesn't like?

MRS: fm to get assignment and change status

Hello all,
I have a requirement for MRS to get all assigned MRS tasks for a specific user (PERNR) and then change the MRS status of a task from an external system. Therefor, I need 2 remote enables FM's.
1) collect all assigned MRS tasks based on PERNR and start/end date.
2) change status of a chosen MRS task.
I have the pernr and orderid's. But to be able to change the status of a MRS task, I need the assignment key (OBJECT_GUID) .
So first, I need to find the assignment key based on the pernr/resource_key and orderid => is there a functionmodule / method for this? Or does anyone know in which table(s) I can find this assigment?
Next, I have to change the MRS status of this task. I found class /MRSS/CL_SGD_DEM_STATUS with method MAINTAIN where I can change the status => but is there also a functionmodule that also does the SAVE?
Kind regards!
Robert

Allright, so I have requirement nr 2 working. But I have not yet found the collection of the assignment value based on pernr / orderid / startdate / enddate. If anyone can help me that would be great!

CProjects- Customizing New Status in "Change Status"

I need to customize new status in "Change Status" drop down of cProjects tool. Now the status available are "Created, Released, Locked etc" as we all know. But i need to customize my own status for "Projects Phases and Tasks" I create. Can i do that. Please help me on the same. It is urgent.
Edited by: Visvesh Ramanathan on Jan 10, 2008 4:00 PM

Hi
As Vivek already explained, you can have user status in bs02
now here you can maintain the status as one maintains in R/3 or ECC
create an auth Key in BS52 for status which needs approval
maintain the same auth key in bs02 against status
what you have to do is create a role using pfcg and assign that key in that role
assign the role to user which ll approve the status to next status.
Select object type which will give you the applicability of status profile.
e.g the status profile is to be used for project / task / checklist etc etc...
The user statusses are visible once you select the status in 3rd tab of project
Niranjan
Award points if useful

Remove status "control recipe created"

Hi
I have a problem with a process order, this was canceled after confirmation and now i can't change to Tecnically complete because the status "Control Recipe Created" i can't remove. I verify the message status on CO54 and i don't have pending to be sent..
How i can correct this?

Hi,
First send the control recipe to process control system through CO53. then delete the PI sheet as per the procedure mentioned below. Once done you can change the status of process order to TECO..
Control Recipe/PI sheet deletion procedure
Thanks
Kumar

Changing status of Task created by system in Notification.

Similar Messages

Maybe you are looking for