Changing Storage Location for Optimized Photos?

Is it Possible to change the storage location for optimized photos...-- takes up a lot of space on my primary drive-- i'd like to put it on the secondary with the photos.

When you say:
We have activated authorization check at storage location level using authorization object 'M_MSEG_LGO'.
Does it mean that you are just using the object - M_MSEG_LGO in the authorizations or does it mean you have activated the authorization check at SLoc level in config along with the usage of auth. object(please note, they are 2 different things).
The goods movement is part of the MM-IM component & this is used in MM, PP etc. So the object M_MSEG_LGO is checked whenever goods movement are posted, provided the config has been activated.
To be sure, check in table T001L whether the field XBLGO has a X for the SLoc where you require this control.

Similar Messages

  • VL10B - change Storage location for delivery

    Hi all,
    I have a requirement wherin, for the deliveries created for purchase orders, the storage location needs to be defaulted from the production order. The configuration of picking has only one stloc for my plant, but we have the same amterial stored at 2 storage locations. In the config we cannot maintain both stlocs for 1 plant. So I need to see if I can do an exit wherin I can read my production order and pick the storage location from there and post it on the delivery. Cn anyone help?

    hi Roy,
    solved this by finding a BADI under Shipping of deliveries which has a SAVE_DOCU_PREPARE interface taht can be triggered toi change storage location/
    Thanks for ur help.
    Problem solved.

  • Need to change Storage location for reservations in production order

    During Production order creation we need to assign storage location against all the reservations in production order. Is there a way it can be done??

    Hi,
          check the user exit EXIT_SAPLCOSD_001.
    Sudheer.A

  • Erorr while changing storage location in VL02N

    Guyz,
    Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
    However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
    *Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
    I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
    Any suggestions please ?
    Thanks

    soumya - I did assign the picking location for my combination. However I noted, if i do this bit, i'm not able to create replenishment delivery from vl10b and erroring with below error. If i remove this assignment, i am able to create the delivery but delivery does not have storage loation. when i tried to change the storage loation in vl02n, i'm getting same below error ...
      Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ / 
    Sivanand - Wheni do transfer order, its complaining that storage location is empty when i try to change storage location, as mentioned above, i 'm getting above error....
    appreciate any inputs ....
    I DID CREATE THE 647 MOVEMENT TYPE ASWELL BUT I'M GETTING SAME ERROR ... Can anyone suggest what control information should go when creating 647 mvt type.....?
    Edited by: Kasu on Sep 10, 2008 10:56 AM

  • Change storage location and plant for Return Delivery (outbound)

    Hi,
    I'm trying to achieve the following:
    Sales orders contained the 'normal' plant. Whenever a return delivery is created it should default the plant to a 'return delivery plant / storage location'. I've looked in to this and it seems we've got multiple options, however i would like to check:
    - Implement V02V0002 user-exit and link with 'return' movement type. Will this ensure plant change aswell?
    - Use standard RETA rule and define ?situations?. Could somebody clearify whether we can achieve our goal with this: Change plant and storage location?
    Any suggestions to achieve the above are very much appreciated.
    Note: Material contains both views for 'return plant/storage location' and 'normal plant/storage location'.
    System is R/3 4.6c with IS Retail activated.
    Kind regards,
    Tim

    Hi,
    The delivery is created against/follow-on a sales order / subscription order / invoice. I don't think we use/have a 'return sales order'. Yes, we only use 1 plant / storage location for the returns of goods.
    To sum it up:
    - Implement badi/user-exit ensuring that the plant is changed/defaulted in to our 'returns plant' for return documents.
    - Configure storage location via 'shipping condition'.
    Correct?
    Ps. I don't think we'll achieve changing the plant via configuring a shipping condition for our return document type. As the plant from the sales order doesn't match with the shipping condition it won't be taken in to account? And yes: It is mandatory/requirement to change the plant for customer return documents.
    Thank you for your inputs.
    Kind regards,
    Tim

  • Automatically creation of storage location for material, in MF60

    Hi all,
    my collegue of PP module uses MF60 transaction.
    When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
    In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
    Why MF60 does not respect this requirement?
    If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
    Is there something more that I have to do?
    Thanks in advance!
    Best regards
    Alba

    Thanks a lot...
    the note says:
    Summary
    Symptom
    A material without storage location view exists.
    If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
    Additional key words
    OMC3, XLAUT
    Cause and prerequisites
    All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
    Solution
    The system behaves correctly.
    Header Data
    Release Status:     
    Released on:     07.07.2000  22:00:00
    BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
    AND if doMF60  (that does mouvement 311), system does not create automatically the storage location?
    Best regards
    Alba

  • How do I maintain storage location for Planned Orders in APO

    Dear all,
    Can you help us in maintaining storage location for planned orders in APO. The storage location from material master need to be updated in product master of APO and the same shall be automatically picked from product master during Supply Network Planning run.
    Material master CIF is live.
    We have got the following content error in CIF consistency check. How ever this is nt goging to harm any thing, but we would like to maintain in both R/3 and APO.
    Error:
    Plant and storage location in SAP APO: 2004
    Plant and storage location in SAP R/3: 2004 FGPA
    Thanks in advance
    Ram Mohan Rao Kolanupaka

    Instead of maintaining additional master data, i would rather use CCR user exits to switch off comparison of planned order at storage location level if the APO storage location is blank. This way you would not have to make changes to PPMs everytime a new scale out of the solution happens.
    In SE18 check the user exit /SAPAPO/CIF_DELTA3 (interface RELEVANT_FOR_COMPARE_ORDHEAD)
    If it is not possible to switch off this comparison then I guess changing master data is the next step. Do explore with a developer though about the first option.

  • Block Storage Location For Any Movment

    Hi All
    Does it possible to block storage location for any movment
    I know I have authorization object but it is required from me to change all roles
    and to look for all transaction that make movment
    Does there is a easy way just to block the storage location without delete it

    hi
    Use Transaction Code MM06 to set a deletion flag for material at storage location level. This shall be done for all materials that have this storage location that can be found by checking the table MARD with SE16.
    As well the message M7 127 from warning to error message (transaction OMCQ) must be changed
    Vishal...

  • Can I assign several physical storage locations for each virtual machine when using the replication-feature from Hyper-V 2012 R2?

    Hi everyone,
    I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
    on different physical disks to have them not slow-down each other in case of intensive disk accesses.
    So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
    individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
    Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
    Thanks in advance.
    Cheers,
    Sebastian

    Secondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform.  Lastly, you could copy the vhd file to a different location
    before starting the VM.
    .:|:.:|:. tim
    Hi Tim,
    thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
    The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
    How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
    2x physical machines carrying severel HDDs
    8+ VMs spread to run on the 2x servers
    when setting up replication I can only set the storage-location from server A on B and vice versa B on A
    Thanks again for your reply.
    Cheers,
    Sebastian

  • Re: Creation of storage location for halb which was not assigned primarily

    Creation of storage location for halb, every thing processed with raw materials for production orders reg  fert and even settled. Later a storage location is to be created for halb. When I created storage location for halb and when I want to post initial stock through MB1C I am getting error saying material type and storage location not maintained. Can any one solve my problem. Thanks in advance.

    Hi Vachanala,
    Are the material masters of your materials extended to the new storage location / have you defined automatic creation (for movement) in customizing (SPRO > Material Manegement > Inventory management & PI > Automatic movements > Create Storage Location Automatically)?
    If the material masters are not extended you can't book those materials to that SL.
    BR
    Csaba
    <b>material master</b>
    http://help.sap.com/saphelp_46c/helpdata/en/ff/515ee849d811d182b80000e829fbfe/frameset.htm
    <b>automatic creation of storage data</b>
    http://help.sap.com/saphelp_46c/helpdata/en/a5/6330f243a211d189410000e829fbbd/frameset.htm

  • Where and how to find the storage locatation for the consignment stock

    where and how to find the storage locatation for the consignment stock (customer stock )  for more than one storage location .
    table :msku
    material no    -   werks - batch
    xxx                   sg11  - 200352ac
    table : mchb
    material no    -   werks  -lgort - batch
    xxx                   sg11   sg10   200352ac
    xxx                   sg11   gs11   200352ac
    note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

    Hi,
    Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
    Regards,
    JLN

  • Block Storage location for particular material

    Hi,
    We gave defined storage location for finished product as follows>
    1050 - 2-8°
    1040 - RT
    When I have created one material, wrongly i have created it in 1050 instead of 1040.
    Then i have extend that material to 1040. Now that material is showing both storage locations.
    Is it possible to block storage location 1050 for this material only?
    Because of both SLOC thre are chaces of wrong receipt in 1050.
    Pl. help me to solve this problem.
    Gkude

    Dear Mr. Kunal,
    I have flagged storage location for deletion but till for this storage location system allows receipt also system allows stk. transfer in this location.
    Pl. help me so that storage location is permanently deleted from the material or system not allow for GR.
    Hope for your reply.
    Gkude

  • Is there any function module which will upload storage locations for a mat

    Hi gurus,
      Is there any function module or BAPI to extend the storage locations of material which is done through <b>MMSC</b> transaction. I need to write a program to upload new storage locations for some materials.Please advise.
    Thanks ,
    Sam.

    You can do this using the BAPI_MATERIAL_SAVEDATA
    Regards,
    Rich Heilman

  • Default Plant and storage location for components in MFBF

    Hi,
    I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
    But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant  and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement  plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
    thanks and regards
    Murugesan

    Hi MURUGESAN !
          Can you give me some information more in Special Procument Configure in plant 2000 like:
              -  Procurement type (maybe F)
              -  Special procurement (Maybe U)
              -  Plant (Maybe 1000).
              - Issuing plant (maybe 2000)
           We will check together.
           Regards,
          Tony

  • Any Idoc for "storage location for a material" ?

    Hi Everyone,
    Does anybody know if there is an IDoc type to insert storage location for a material (Table MARD).
    BDC is also an option but IDoc should be a better choice.
    Thanks & Regards,
    Ankur

    Hi Ankur,
    Storage location view of a material can be created with
    MATMAS message type ( Segment E1MARDM )  . You can also use program RMDATIND with relevant data to add the storage location view.
    Cheers.

Maybe you are looking for

  • ABAP Help documents

    Hi All,         I just started learning ABAP. Can any one suggest me documents/ Help docs. Thanks, Anitha.B

  • I can't seem to find anything wrong

    I can't seem to find anything wrong with this syntax. Am I crazy? public class AA     private int x;       private int y;       public AA()           x = 0;             y = 0;       public AA(int a, int b)           x = a;             y = b;       pu

  • Find ASM Home

    Hi, My question is : To find the ORACLE HOME we use the "echo $ORACLE_HOME" and to find the CRS HOME we use the "echo $ORA_CRS_HOME"; In the same way, What variable i have to use to find ASM HOME ? $ ps -ef |grep smon oracle 7416 1 0 Apr08 ? 00:00:00

  • Any Java API for dumping database?

    As far as I know, the normal way to dump a database is to execute some command on the console. Is there any Java API for dumping a database, so that the operation can be wrapped in the code? The database system that I'm using is MySQL. Please help. T

  • Issues transferring MP3s to Zen x

    Hi, I've recently had to reload my firmware, but since then, i've had loads of issues with the file system. The latest issue is that, initially when i reloaded the firmware, i reloaded all my songs again. now, i'm trying to add some more, but it's te