Changing tab in Safari 7.0

After I upgraded to Mavericks, I have had problems regarding chaning tabs in Safari. I have tried to eddit settings and prefrences without any luck. The wierd thing is that it works in finder. Does anyone know how to fix the problem?

Similar Messages

Changing charts in Safari

Hello
I have problem while changing charts in Safari. If I open few of them (all are loaded) and decide to spend like a minute reading something in one chart and then decide to switch to another chart, it loads again the whole website. I noticed that this does not happen on my friends iPad Air ;(.
Did someone have similar issue?
Thanks a lot.
I have iPad Mini Retina.

I meant changing tabs in Safari, sorry for the mistake, difficult day ;)

Is it possible to change the color of the main toolbar and tabs in Safari?

I was wondering if there is a way to change the color of the gray toolbar/tabs in Safari?
Thanks.

HI Chris,
No, sorry.
Carolyn

On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

Start up in Safe Mode.
http://support.apple.com/kb/PH4373

Can I change active tab on Safari from Search tab to Address tab on iPad 2 ?

When I open a new tab in Safari its automatically puts you on search tab .. I want to disable this to makes the address tab is active when I start a new tab .. is it possible ?
Im using iPad 2 on OS 4.3.3

You need to create a backing bean that will hold code for the event of clicking on the link.
In that code you'll set the disclosed property of the showDetailItem you want to make active to true, and then change the other tab to false.
A basic intro to working with backing beans is here:
http://blogs.oracle.com/shay/2010/03/working_with_backing_beans_in.html

How do I change the way Safari 6.0 uses RSS feeds?

Before I updated my safari to 6.0, I had a button with my RSS-sources in the menu bar in Safari. When I clicked one of the sources it contains, it would open in a new tab (in Safari) the RSS feed for that source.
However, ever since I've updated Safari to 6.0, it opens the RSS feed in Mail (I haven't changed any settings what so ever) in a way that is not handy for me.
In the normal preferences menu, I can't find any way to change RSS settings. And when I use the Help button, and search for RSS, I don't find anything either.
Is there anybody who knows how to solve this problem?
Thanks,
Steven

Thanks for the quick reply.
However, this didn't solve the issue. It puts a button in the menu that helps you save an RRS feed. And when you press this button, Mail opens up to store the feed.
I'd like Safari to open the RSS feeds again, like it used to.

Privacy tab in safari 5.1 preferences is empty.

This is a screen shot of what I see when I open the privacy tab in safari preferences. Any reasons for this? Help!!!

Just spent an hour at an Apple Store with 2 Genius' and was not able to resolve the issue. This issue exists on both my Macs. One is running Lion and the other Snow Leopard. We checked other systems in store and none of them had problems. I suspect that this problem came as a result of an OSX / Safari update at some point because I haven't always had this problem. Safari Preference Pane isn't something that I (and I suspect many) people get into very frequently, so there's probably others with this problem (they just don't know it yet).
I did find that if you're using Lion which will re-open where you left off once you quit, that the following "work around" seems to work consistently. Open the preference pane that's blank (i.e. Privacy or Extensions). Next, quit Safari without closing the Preference Pane. Relaunch Safari and the Preference Pane appears displaying correct content. The strange thing, at least on my Lion system, is that the Blank Preference Pane flips between Privacy and Extensions. But, I'm able to correct the Preference Pane I need by going through this procedure. Again, this does not work for Snow Leopard because it won't re-open where you left off.
I've tried reinstalling Safari and nothing changes. My (and the Genius Bar's) opinion is that a "Fresh Install" is all that will probably fix this. Not an option for me at this point, so I'll just get along for now.
Wishing all with this issue the Best and I hope someone eventually comes up with something other than a "Fresh Install Option".

How to put the focus on the address bar, when opening a new tab in Safari?

Dear users, I'm using Safari 6.0.3 (8536.28.10) under OSX 10.8.3. Until recently, whenever I opened a new tab in Safari, the focus was always on the address bar, which was quite useful. However, since last week, maybe after an update (I don't know exactly), the focus of a new tab is always on the page, not the address bar. How can I go back to the previous configuration? I changed no options, it simply got sudeenly different, and it's quite annoying. Thank you for the help.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
If any extensions are installed, disable them and test.

In lion, how do I change settings so Safari opens to homepage only

In lion, how do I change settings so Safari opens to homepage only

Just go to > Safari preferences>Click "General" tab on Homepage type your homepage
Example http://www.youhomepage.com/startpage/ this should work that's how i set my home page for example
if you want it to be apple startpage is( http://www.apple.com/startpage) also you can uncheck the open windows at login box and set safary to empty History when quicks

Duplicate Tab in Safari

I like Apple very much but I think is big fail if "Duplicate tab button" is missing in Safari.
It is no good way use CMD + L and after CMD + Enter, because history will be lost.
Second way through "Preferences->Gneral->New_tabs_open_with", which change "New tab" button to "Duplicate tab button" is no enough good too, because after this is missed pure "New tab" button.
I am developing websites many years and I usually use a lot of browsers. I want to prefer Apple solutions and Safari, but this feature is for me very important. Please Apple team for "Duplicate Tab" in Safari, I think is very necessary feature for many users, who use browser for professional work.
Many thanks for you products and your effort to improve products every day.

Click here and fill out the form.
(118507)

MacBook Pro Freezing when opening new tab in Safari - MY SOLUTION

All,
I have been battling with a Safari issue for months; I have seen many postings of the same and similar problems.
Problem when opening a new tab in Safari the computer completely froze up. Sometimes the curser still moved around but could not select anything, requiring a hard reset. Sometime the screen went blue and the computer reset on its own. Crashed at least once daily.
I thought it might be OSX, Safari or Flash; however I upgraded each of those several times with no major progress. Note adobe is constantly upgrading flash and some recommended you should use their uninstaller before upgrading.
One thing I noticed when opening a new tab was that the tab was a bit slow in opening, taking a few seconds with a hiccup to show "top sites." I got suspicious when I saw the lead picture of one site with a blank adobe flash warning showing up for a second or two... My system is a few years old but has a fast drive, lots of memory and is optimized for speeeed.
MY SOLUTION>>>
So I tried changing how the new tab showed up by selecting: Safari>Preferences>General>New Tabs Open With Empty Page. I think that worked but don't remember. I really missed the "top sites" preview. So I put that back and just killed the flash ridden site from the "top sites" (just open a tab, click edit at the bottom left corner of the tab then click on "x" for the suspect site).
FYI - The suspect site administrator told the browser could be storing a corrupt cookie; I reset Safari and ran OnyX so am not sure if that is the issue but it might be a clue for others.
FYII - I think the problem is related to flash implementations on some sites if that was not clear in the text
Hope this helps.
Message was edited by: scooter!

Hi Scooter!
Thanks for posting a Presuming "SOLUTION"
I don't have these problems as you described, but did you drag the Cookies.plist to the desktop and relaunch Safari an try to open a NEW TAP.
What happens now ... is Safari handling opening a new tap from the TOP SITE window?
Post back ...
Dimaxum

Switching Tabs in Safari

Hello all, this is my first post. I'm sure you all can help me.
I find that SHIFT + COMMAND + (L or R) BRACKET is a very uncomfortable and troublesome shortcut to switch tabs in Safari. I use the shortcut every day, and was wondering if it's possible to make it a little more friendly. In other words, can I change that function to a different, user-defined shortcut? Thanks.

Go to the Keyboard and Mouse Pane of System Preferences. Hit the "+" sign. Now, select Safari from the drop down, and make the changes to the items you want. It's in Safari's "Window" menu. Be careful. Make certain you have the exact menu choice typed in.

Every time i try to open a new tab on safari 6, it closes and restarts

every time i try to open a new tab on safari 6, it closes and restarts,,, it happened after the latest update

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Tabs in Safari close very slowly.

Closing tabs in Safari is painfully slow. This problem happens intermittently, with no discernable pattern. It is unaffected by the number of tabs that I have open. It occurs whether I press cmd+T, or whether I close a tab using the mouse.
Closing one tab takes ~4 seconds. There is 1.5 seconds where Safari is unresponsive and my cursor remains an arrow. Then my cursor becomes the "pinwheel" for ~3 seconds, and finally the tab closes and I am back in action. The rest of the OS remains responsive during these 4 seconds.
Any ideas for what I can do? It is absolutely infuriating. It's been going on for many months, and I ended up re-installing OS X, but the problem persists! I have done some searching, but haven't seen anybody else online with this problem.
Very many thanks.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Turning off tabs in safari?

How do I get rid of tabs in Safari on iPad?

Safari on iOS 5 uses tabbed browsing, and not the thumbnail/page browsing as on previous iOS versions, and it can't be changed. If you want thumbnail browsing to be an option then you could try leaving feedback : http://www.apple.com/feedback/ipad.html

Changing tab in Safari 7.0

Similar Messages

Maybe you are looking for