Changing Text in flash Header that cannot be located

I've a simple template I purchased with a flash header. There is a top navigation across the top of the header in previewing it. However, no matter how much I try to locate each of the text to change it per button, in the library, all of the buttons have the same name, in this particular, "main page", but NOT the rest of the menu from left to right in preview mode. I've went through every single library item to locate how to simply change the text, that's all for each of the menu items and cannot find the residual text for each button on the top of the preview navigation. In my library there is no navmenu or anything like that. The closest I could find was:
button 2 copy which says 'main page'
button 2 copy 2, which says, 'main page'
button 2 copy 3,  which says, 'main page'
button 2 copy 4, which says, 'main page'
button 2 copy 5,  which says, 'main page'
button 2 copy 6,  which says, 'main page'
button 2 copy 7  which says, 'main page'
So, no where else in the library do I see, in this particular, the text of the residual navigation items which in this case is at the top of the header. This is nuts. I need to change the remaining items in the top navigation, to things like "main page" which  already have, then "buying", "selling, "movng" and so forth, but cannot find how to change the current text. So simple, but I can't figure this out. Please help... To see an example of needing to change the top navigation to other names, please see http://www.fanniemaehouse.com .
Thank you.!!

How much would you charge for just setting those three links on the left navigation? One will go to an outside li
nk, the other two to other pages inside the website. I'll send you the .fla file if you need.
Here's my email, [email protected] .Thank you, as it's kinda urgent. I'll send you the .fla file if you send me your email.

Similar Messages

  • Remove ALL Songs that cannot be located

    Windows 7, Itunes 10
    I have a large itunes library with thousands of songs that now have the Circle Exclamation Point next to them (cannot be located).  The ! does not seem to be a filterable column - so I cannot group and remove (using Shift click select approach).
    I want to do the following:
    1) Ensure all unlocatable songs have been identified and marked with the "!"
    2) Select them as a group and delete them.
    I tried putting the entire library into a single playlist and playing the play list - assuming each song would be "checked" - no luck.  As soon a the play list hits the the first song with an "!" next to it - playlist stops.
    Please help me (windows 7 - no mac scripts)
    Thanks.

    In addition to the tip above these tools will help find files that have been moved/deleted/lost from iTunes and need adding back into the library (or permananently deleting).
    *Adding new items/removing orphans*
    Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s really slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
    tt2

  • Is there a way to automatically sort/filter the itunes music list by files that  cannot be located?

    I have quite a lot of files that can't be located, and want to delete them all at once rather than clicking on everyfile to choose delete. Does anybody know of a way to sort the itunes listing so that I can group them all together to delete, or a way to automatically purge them all from the itunes file?

    But is there a way (simple or not-so-simple) to find
    out EVERY SINGLE FILE that's referenced on a
    timeline? (I have lots of stuff imported into the
    project that I know isn't used on any timeline, but
    I'm afraid of moving or deleting things for fear of
    never finding it again.)
    I'd love to get some sort of "printout" (a list or
    something) of every single file.
    There is, go to browser and cntrl click on any one of the columns,
    and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
    Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
    If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
    From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
    Hope this helps and that I've read you properly,
    Peace
    P-Book 1.5, 17" 2gsRAM   Mac OS X (10.4.4)   FCStudio

  • I downloaded something that cannot be located, and it won't let me re-download it again? iTunes 11

    So I purchased something that I downloaded on another computer. For some reason it won't let me re-download the product to the one I'm using now, because it shows up as "Downloaded" on the Purchased screen. Do I have to buy the album again just to download it again?

    You have to update via iTunes.
    iOS 4: Updating your device to iOS 5 or later
    The Update in settings is in iOS 5 and later.

  • LONG TEXT IN PO HEADER

    i use FM 'save_text' could change long text in PO header but cannot create the long text. any advice?

    Have you mentioned
    SAVEMODE_DIRECT = 'X' ??
    here is the Link to give you an idea how to call SAVE_TEXT function module ?
    Re: SAP Script
    and
    Re: where to get the Text of  standard Payment term in PO.???
    regards
    srikanth

  • Changing text within frames without adding space at bottom

    Anyone know if there's a method for changing text within frames so that the successive text automatically flows into position without creating blank space at bottom of that current or a subsequent frame?

    Peter,
    You can combine the discussions if you want.  I actually deleted a sentence beginning the second discussion explaining that it was related to the first.  I thought it might impede the discussion.
    Let me describe my problem more completely.  I'm adjusting a book that was carefully crafted using frames for each page so that the text extended to the bottom of each page (frame).  This often splits text within a paragraph between two pages.  This was done so that the customer doesn't feel they are purchasing any blank space and for the aesthetic purpose of filling each page with text.  The only exception is the beginning of new chapters or sections.
    The problem is that I want to change a word here and there in preexisting paragraphs.  When I do, space often one-third the page length is generated at the bottom of a page (frame).  To fill that space and extend text to the bottom of the page again requires -given my current understanding of options- selecting the paragraph (beginning on one page and completed on the second) that has become interrupted by the blank space and performing a "keep lines together" option.  Unfortunately, this usually generates new blank space on a subsequent page, requiring a new "keep lines together"; in a seemingly unending regress of this procedure.
    What I require is a method enabling me to add text within a paragraph that will avoid the generation of the blank space by flowing the subsequent text (composing one or more paragraphs and splitting a paragraph between pages if required) to the end of the page; completely filling the page without requiring any use of "keep options" or whatever.
    Richard

  • TS4036 items in Library cannot be located on PC

    I have items listed in my iTunes library that cannot be located on my computer.  When I look at the Purchased - not on this computer sestion in the iTunes Streo, they show as "downloaded."  How can I get these items back to my computer?

    Hi there trikytrev!
    I have an article here that can help you troubleshoot this issue:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Substituting a graphic for text in a Flash header

    I am using a simple Flash program with 4 lines of text -- the
    final line being a company name -- for the header of a website. The
    program works great. Current the text is dynamic with the text held
    in a flash.txt file linked to the flash.fla file.
    In place of the final line of text in the program, I would
    like to substitute a graphic logo. The graphic I want to use
    instead of text is basically the same size as the text. And I I
    don;t need to change the animation text. I just want to be able to
    use the graphic instead of the simple text. Is there is a simple,
    easy way to substitute the graphic flie (say, a gif, or png file)
    to the text in the flash program? I am assuming that this should be
    easy, but I can't figure out howto do this (yes, I am relatively
    new at this). Can anyone give me any suggestions, clues, or insight
    into how to do this? Thanks very much for you help.
    Thanks.

    Image,
    Instead of entering a 1 for the grade, why not enter the date. Then instead of adding 1's to get the level, use COUNT(E1:I1). Condition your cell fill to "not equal to 0" and leave the text option unchecked. That way the date will show through the background.
    pw

  • Change Table control Column Header text dynamically

    Hi,
    I have an requirement to change table control column header text dynamically.
    i.e. I have about 10 columns in table control, out that need to change 5 columns header text. These header texts are stored in an internal table.
    I had looked into the below link but could not get exactly how to do it.
    Dynamic headers in table control
    Could you please tell me how to do that.
    Thanks in Advance.

    Hi Saba,
    What you will need to do is this.....
    1. First replace the column Header Text box by I/O Fields and name them accordingly.
    Say for example we will consider the same example which i had explained in the link.
    there in the column header we want the header to change when some dates and entered into two fields which are out of table control say
    Start Date: 01.01.2010 to End Date: 06.01.2010
    Now we want the header to look like this,
    Column  No.    -        1               2             3                  4               5               6
    Header label   -    01/FRI       02/SAT     03/SUN       04/MON     05/TUE      06/WED
    Header name -    SPOTS1   SPOTS2    SPOTS3      SPOTS4     SPOTS5    SPOTS6
    then you go as per the instructions in the link......
    Let me know if you need further help,
    Hope this solves your problem....
    Regards,
    Abhijit G. Borkar

  • The item contains one or more busy items that cannot be changed

    We have a Windows 2003 file server and we are having issues with Macs retrieving files/folders from it. There is a folder on the Windows share named "dropbin" that UserA has full permissions on. UserB has the following NTFS permissions on the dropbin folder.
    Traverse Folder / Execute File Allow
    List Folder / Read Data Allow
    Create Files / Write Data Allow
    Create Folders / Append Data Allow
    Write Attributes Allow
    Write Extended Attributes Allow
    This gives UserB the ability to look inside the dropbin folder and place content in there. This same user cannot delete or pull down anything that a different user (UserC) has put in there. UserA (the person with full permissions) should be able to pull down anything put in there.
    This works fine from an XP box if an XP user (UserB) puts content in there UserA from a Mac or a PC can get and manipulate the data. If a Mac user (UserB) puts a file up there (it seems to happen with a .txt file, a .cp file, or a .zip file) UserA from a Mac gets the following error when trying to download the file:
    "You may need to enter the name and password for an administrator on this computer to change the item named item.txt"
    When you hit continue you get the following error:
    "The item item.txt contains one or more busy items that cannot be changed"
    If you proceed to enter in the admin credentials, the file doesn't copy down to the local Mac and fails without an error.
    A couple of things we noticed....
    1. If Mac UserB puts up a Word document or a .dmg file then UserA from a Mac can pull it down fine without errors.
    2. On the Windows 2003 server we noticed that for each file we tried to upload it creates a ._ corresponding hidden file. For example, item.txt also has ._item.txt. If we go up on the server and remove the hidden file, Mac UserA can pull down the file fine.
    3. We tried zipping the files (or files and folders) locally on Mac UserB's desktop then putting the .zip file up there but since it creates a ._file.zip Mac UserA still can't pull it down.
    4. The fix we found for this is to have Mac UserB place the files they want to upload into a folder on the desktop, then upload that folder. When Mac UserA comes by they can pull down that folder's worth of stuff.
    We are accessing the Windows 2003 file share by going to the finder and using the "Go" menu and entering in:
    smb://servername/sharename
    and they use their Windows domain credentials to log in.

    We may have figured this out but it requires some more testing. The reason why the file upload creates the ._ files in the dropbin folder when UserB puts content in there is because UserB does not have the "Delete" permission in that folder. My guess is that it creates the ._ file when the file is in transit but then deletes that file after it has completed the transfer (but without the delete permission it couldn't remove the ._ file). What we did was added another user to the NTFS permissions for that folder, we added the built in "CREATOR OWNER" account and gave that user the "Delete" permission, now the ._ files do not appear under there and UserA can come along and manage the uploaded file okay.
    Hope this helps someone else out.

  • I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

    I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

    I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.

  • I downloaded Icloud somehow I changed my itunes account information and cannot get back to my original account that had a redeemed balance on it  how can I get back to the original account?

    I downloaded Icloud somehow I changed my itunes account information and cannot get back to my original account that had a redeemed balance on it  how can I get back to the original account?

    Buy the songs that your friend put on the iPod that you liked. They had no right to give you the copyrighted music when they sold you the device.
    tt2

  • How do I programatically change the text in a listbox that is contained in a cluster?

    How do I programatically change the text in a listbox that is contained in a cluster?

    In the front panel, right click on the listbox object and select create>attribute node.
    In the diagram click on the attribute node and select "Item Names".
    Connect the desired array of string to the attribute node.
    BigBen

  • How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.

    How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.
    As an example, html widget has white background on iPad, and black on mac. The same goes for interactive widget.
    The MathType text inserted is inserted as a image, and will have the same color when in fullscreen as when not. So I need the textcolor to be the same in both views. Anyone know how to fix this?

    We're still not communicating. This is why I wanted an example .iba.
    Here's a re-creation of my own, going off what you described. You said "all html widgets and all gallery widgets" have this problem. So I inserted a blank HTML widget and a blank Gallery widget, and typed into both. Inserted a MathType equation into both. I don't see any difference when I preview it on my Mac compared to the preview on the iPad. I want to help, but I can't help if I can't duplicate the issue.
    I've attached the screen shots and the .iba file [link to .iba file].
    Feel free to email me directly at bobm at dessci dot com. If you're uncomfortable giving some information here, tell me anything you want in email. I work for the "MathType company", Design Science.

  • How do i change my message settings so that when i get a text message only the phone number shows up - not the message?

    how do i change my message settings so that when i get a text message only the phone number shows up - not the message?

    settings - notification- message - show preview - OFF
    you can also select the alert type your want -banners or alerts

Maybe you are looking for