Changing text of FF/SUP emails

Is there any way to change the text of the Login Notification and Log Reports that are emailed out of Firefighter?  Our Security group would like to add more verbage to these emails.  We are on GRC 5.2 SP12.  SAP FF version info:  VIRSANH 520_620 SAPK-52112INVIRSANH.
Thanks.

Hello bob,
I have checked my system for any configuration on login notification and log report mail format, but I did not get anything.
So, I hope this facility is not there but you can ask SAP for enhancement.
Regards,
Sudip.

Similar Messages

  • TS3899 the text of my incoming emails is not showing on the screen.  I must have pushed some setting change but I can't figure it out.  Thanks...M

    the text of my incoming emails is not showing when I tap the message.  I probably changed some setting by mistake but I don't know what i did.  would like to be able to read my emails on the screen.  the 2 line starting area shows fine.

    browsing around internet found others have had this problem and recommended turn off/turn on phone, which I did, and that fixed it.   at least for now.   thanks...

  • How to change text in PDF doc. which is a musical score

    Hello,
    I'm new here, so please excuse me if I do or say something I shouldn't.
    I need to change the words in a musical score because the font is too small. OCR recognition doesn"t work because there are illustrations that are different from images or text... Is there a way to get in there and make the changes I need to do?
    Any help greatly appreciated.

    Thanks for the reply, but I have Adobe Reader 9 Pro. Will it still not 
    work ?
    Le 29 sept. 2011 à 29 sept. 11 - 16:09, Claudio González a écrit :
    Re: How to change text in PDF doc. which is a musical score
    created by Claudio González in Adobe Reader - View the full discussion
    Unfortunately, not with the free Reader.
    Replies to this message go to everyone subscribed to this thread, 
    not directly to the person who posted the message. To post a reply, 
    either reply to this email or visit the message page: [http://forums.adobe.com/message/3944833#3944833
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/3944833#3944833
    ]. In the Actions box on the right, click the Stop Email 
    Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Forums
    For more information about maintaining your forum email 
    notifications please go to http://forums.adobe.com/message/2936746#2936746

  • Just bought new iMac. When browsing in Safari, sometimes the text suddenly gets super large. I'm doing nothing except reading the screen, tho I have my hand on the mouse. I can get back to normal size by clicking "actual size" in View. What gives?

    Just bought brand new new iMac. When browsing in Safari, sometimes the text suddenly gets super large. I'm doing nothing except reading the screen, tho I usually have my hand resting lightly on the mouse. I can get back to normal size by clicking "actual size" in View. But then it does it again a minute or two later. What gives? Something seems defective--but what?

    From System Preferences, Mouse, Point & Click, Secondary click.  Go to it hover over Secondary click and watch the short video sequence change it left right, left right, you will see exactly what is does. No I do not think your Mouse is defective, you simply need to take control of your Mouse finger.

  • Can we change the font in the email that is being sent from SAP ?

    Hi,
    I have a requirement where in we need to change the font for the contents in the mail being generated from SAP.
    I am using the FM SO_DOCUMENT_SEND_API1 to send my mail.And the contents are just appened to an internal table as text elements.
    Can we change the font in the email that is being sent from SAP  to Arial 10points?

    E-mails generated with that function module are created in plain text format.  The font that would appear when reading the e-mail would be dependt on the user's setting for the e-mail application (e.g. Outlook).
    To my knowledge, the font cannot be affected during it's creation.
    Hope this sheds some light on your issue.
    -Mark

  • How we change a word to Super Script in ADOBE Form

    Hi,
    I have scenario where I need to change a word to super script. I am getting the super script value in a variable, now When displaying on a abode form in a particular cell I have to concatenate this word and make sure that it appears as Super Script to the word preceding it.
    Really appreciate if someone can post suggestions and ideas to do it.
    Thank you,
    Srikanth

    Hi Srikanth,
    In case of text field you can do this . Its simple.
    You just need to check the rich text property from text field properties
    Now you can select any word and change it to superscript by using the corresponding properties button.
    Moreover I guess If you create a table and save some data by copying from excel or word as superscriipt it gets saved in table. so you can use this way also.
    P.S check this link
    http://scn.sap.com/thread/1033300
    Regards,
    Sandeep Katoch

  • Change text and background color when multiple tracks of text

    I am finishing up a project and the client wants the final title card to be white background with colored text. I have read a bit about how to do this but I can't fit it into my situation. My text is on four different tracks, each piece of text "For more information," "email address", "contact", "phone number" So I need to change each one. But the way that I have read about it, it seems those answers are only for one level of text.
    Help?

    You should probably be using boris title 3D rather than the default text generator.  title 3D is part of the fcp default install and is available in the same generator options where the text generator is found under Boris.
    It will allow you to conbine fonts, font sizes, etc in the same clip.
    And then you'll just have to put a color matte on a video track under the clip.
    You can of course just put all your text clips on a track above the color matte and manually change the color of all the text.

  • All of a sudden my iphone is sending text messages from my email address instead of my phone number?

    My phone is sending my text messages from my email address, not from my phone number.  How do I fix this?

    what if I only can choose the email address which I can delete and I also have an out of states number because I used my phone back home and now Im back in the states and I cannot get it back to my US cell number its just set at my email and I want to change it...HELP!

  • [SOLVED] Sup email client 256 colors support

    I've installed sup email client (https://aur.archlinux.org/packages/sup-git) and wombat theme (https://github.com/mklinik/sup-colorscheme-wombat) for it. But everything become red-colored in the background and white-colored for text (I'm using rxvt-unicode and it has 256-color support so things should work find). I tried to google but found nothing.
    I though there is issue with support 256 colors in ncurses so I rebuild this package with necessary flags from pkgbuild: https://projects.archlinux.org/svntogit … es/ncurses and installed it. But due to version differences gem file didn't build after it with message "error while loading shared libraries: libncursesw.so.5: cannot open shared object file: No such file or directory" (and also really much stuff broke so I hardly restored original ncurses).
    Somebody know the way to use sup with 256 colors in terminal?
    Last edited by Shagabutdinov (2014-04-28 07:00:40)

    jasonwryan wrote:The correct way is to use terminfo: setting the variable in Xresources or anywhere else is an ugly hack that will likely cause other problems down the track...
    Not causing problems down the track is the exact reason given for why you should use Xresources to set TERM. The consensus seems to be that the terminal emulator should be the one to set it and using Xresources is one way to do that.
    However TERM is set - Xresources, arguments, .bashrc - all that matters is that the capabilities defined in the terminfo file match the actual capabilities of the terminal emulator. Having the terminal emulator do it at least gives it the chance to match capabilities. It also prevents TERM from getting set to the wrong value for other terminal emulators or virtual consoles.
    (Also, one does not "use terminfo" to set TERM. Terminfo uses TERM to tell terminal apps the capabilities of whatever they're outputting to.)

  • My iphone 5c sent text message as icloud email-why?

    need to know why my iphone 5c is sending my text messages as icloud email.
    I attempted to turn that off in settings and then was unable to send any text messages.
    Don't know why this has changed.

    sirollicpeg wrote:
    On my iphone in settings under messages send/receive I have three addresses- my cell phone number and it is checked, my regular email address and it is checked with and I in a circle next to it and the third one is my email@icloud, also checked with an I in a circle.
    start new conversations is my cell phone number that is checked and the two emails but they are not checked.
    Also- another note-When my husband puts me in his contacts and tries to put my email address in it changes It from email to work or home number
    More than likely, your husband is trying to add your phone number to an email designated field in contacts.
    What app are those recipients using to open the message that seems to be an email? The Mail app? or Messages?

  • I have an iMac desk top, iPad, and two iPhones. Someone (a family relative) has somehow copied text messages, and possibly emails from our iPhones, and sent them to other people. He has had access to my wife's iPhone numerous times. Can I check our iPhone

    I have an iMac desk top, iPad, and two iPhones. Someone (a family relative) has somehow copied text messages, and possibly emails from our iPhones, and sent them to other people. He has had access to my wife's iPhone numerous times. Can I check our iPhones to detect any surveillance apps(bugs) on them?

    Whose Apple ID are you using? It sounds like whoever co-opted the account may have changed the security questions as well.
    Follow the instructions here: http://support.apple.com/kb/HT5665
    What should I do if I don't remember the answers to my Apple ID security questions?
    Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
    If you are confident you can't remember them, try one of the following:
    If you have three security questions and a rescue email address
    sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers. 
    If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
    If you have one security question, but don't remember your Apple ID password
    contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
    Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.

  • I changed my Apple ID (new email address, same account), but when I try and use my iPad, it is asking me to sign out and delete the account, losing all data.  If I do this, will it all still be there on my new ID? Thanks.

    I changed my Apple ID (new email address, same account), via the Apple website on my laptop, but when I try log into ITunes on my iPad, it still has the old ID.  It is greyed out, so I can't change it.  On researching further,  it seems I have to sign out of iTunes and sign back in using new address.  Ok so far, but when I do this, it asks if I want to delete the account and any data on the cloud.  If I do this, and sign in with changed ID, will all the data be there Or will it be lost?  Thanks for any advice.

    Sounds like apps purchased from those accounts got synced to the iPod and it is asking to log into that account to update them.
    - Apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
    What do yo see if yo go to the Updates Section of the App Store app?

  • Can't change text once I've finalized it!

    I've been using Photoshop for years, so I know all the basics.  And I've never run into this before.  I created a document with text boxes and images.  Everything was fine to that point.  But when I went back to re-word the text boxes and change text color, I could not do it.  I tried everything:  be sure that layer is selected, be sure I have the type tool enabled, and click somewhere in the existing text.
    Nothing doing.  No matter what I did, it insisted on starting a new text layer.  I could not access the text itself to change it.
    I could transform it or move it but it will not let me change the text itself or the text color.
    I'm using the PS cloud version and running Windows 7.
    I ran into this a few weeks ago, and rebooting my computer solved the problem -- or so I thought.  Apparently it didn't solve it permanently.
    Help, please!  This was due yesterday and my client is understandably not amused.
    Thanks.

    Now I can change text in any text box except the one titled "spinetext", which is highlighted in the layers panel.  Obviously I'm doing something wrong, but I've designed a lot of these covers, and never had trouble changing the spine text before.
    I finally had to recreate that layer in a new document and import it into this one -- but the text remains unchangeable in this layer.
    (For what it's worth, "Layer 1" is the template, which I turn off when I have inserted all the elements, so it has nothing to do with this layer.)
    Thanks for your help!

  • Why am I unable to change text color from black in LR5 book module?

    Why am I unable to change text color from black in LR5 Book Module?

    I'm assuming you clicked on the color patch besides the word <Character> to open the color picker window.
    At the right side of this window there is a vertical bar that has 2 horizontal black lines at the bottom.
    This is actually a slider. Pull it upwards with the color picker and color will appear in the window.

  • I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my passwor

    I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my password, which it won't accept because it's an invalid username.

    I had this same issue and got it resolved very simply when I contacted Apple SUpport
    Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and sign into your infomation
    > Go to Manage apple id and primary email address
    > Change it to the old apple id that your device is asking for
    > Save changes
    > Go to Settings > iCloud and sign out of the infomation
    > Go back to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    > Change it back to the correct apple id
    > Go to the email address adn reverify the apple id
    > Sign back into iCloud on your device
    > Smile
    Article to back up my statement http://support.apple.com/kb/TS5223

Maybe you are looking for