Changing the 1-2 stereo outputs to mono in logic

I want to assingn the outputs of each track in Logic individually so that it matches each channel of my recently purchased M-Audio Nrv 10 mixer (which also serves as my soundcard). Can't seem to figure out how to change the outputs (right below 'imputs' button and seen as'1-2') of each strip channel from stereo to mono. Is there an answer to this question? it seems to me, from the responses i've read in this forum, that the answer is still unclear. If you can help it would be greatly appreciated.

You can't change the outputs to mono from the output selection tab, but you can pan each output to route to the correct channel. Set track 1 and track 2 to have 1-2 outputs and pan track 1 all the way to the left and 2 all the way to the right, and you have mono outputs. Continue that with all of your outputs and they all will be mono. If you want to bounce to mono, either bounce the stereo pair and choose 'split LR' under 'stereo file type' or change the output channel strip to mono and then bounce from there. If you change the output channel strip to mono, the tag will still say Output 1-2, which you can just change manually, but if you highlight the channel strip and look at the information to the left of the channel strips, under 'channel' it will say 'Output 1,' instead of Output 1-2. Hope this helps.

Similar Messages

I have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

Changing the seeded rdf report output from text to PDF

Hi All,
I am trying to change the seeded report "Print Requisition Report" output from text to PDF. I changed the output format in the concurrent program definition from text to pdf. The report is now getting displayed in pdf format, but the alignment of the fields are changed. The output is not printing as it was printing while in the text output format. The output looks very sloppy, with uneven fonts and too much of text wrapping.
I tried some formatting and fields are somehow getting displayed but doesnt look in proper format. I am not able to change the font style in the report builder 6i, even if i change it is printing in the same font style with uneven font size. I think reducing the font size might help, but i am unable to change.We are on 11.5.10.2. Please provide your valuable suggestions on how to go about.
Thanks
Sarvesh

Hi Hussein,
Thanks for the information. After the adjustments in the layout and the font change the report is now getting displayed without any clipping when clicked on view output. But when the same report is printed some characters on the left and and right side is getting clipped. Please help on how to solve this issue.
Thanks,
Sarvesh

How to change the header text on output type in sapscript

Dear All,
In the sapscript, I would like to changes the header text from invoice number to sales number on the output type z001.
Could someone can guide me?
Thanks.

Hi,
Please go through following link :
http://forums.adobe.com/thread/870081#870081
Thanks and Regards,
Vibhuti Gosavi | [email protected] | www.infocepts.com

Issue using JS to change the value of an output text component dynamically

I am developing an application and I need to change the output text component value at run time when the mouse moves over a field. I am using javascript and then using UIComponent.setproperty to change the value.
I am not able to do this and am getting nothing.
Kindly let me know what am I doing wrong
I am using ADF 11g (10th November release).
Regards,
Deepak

Hi i'm doing the same thing with an input text
here is my code
jspx:
<af:inputText value="#{bindings.MiddleName.inputValue}"
label="#{bindings.MiddleName.hints.label}"
required="#{bindings.MiddleName.hints.mandatory}"
columns="#{bindings.MiddleName.hints.displayWidth}"
maximumLength="#{bindings.MiddleName.hints.precision}"
shortDesc="#{bindings.MiddleName.hints.tooltip}"
id="it4" autoSubmit="true">
<f:validator binding="#{bindings.MiddleName.validator}"/>
<af:clientListener type="valueChange" method="mo_UpperCase"/>
</af:inputText>
js:
function mo_UpperCase(event){
var inputField = event.getSource();
if (event.getNewValue().toUpperCase()!=event.getNewValue())
inputField.setValue(event.getNewValue().toUpperCase());
In my case i change the input text to upercase when the value is changing
I hope it works with output text also,
change my examples clientlistener type from valueChange to mouseOver
If you have more than one component and you need to pass parameters check this thread also:
bug at af:clientAttribute 11.1.1.2.0
Tilemahos

Changing the PXI-6624 Counter Output rate on the fly

I'm programming an application in VB.net 2005 to set several counter output channels (each with its own task) on the PXI-6624 card. I'd like to know if there is a way to change the frequency of the output without stopping the task, changing the frequency and restarting the task. I'm using the PXI-6624 card to simulate encoders and speed sensors.
Thank you very much,
JonS101

Hi,
Yes, you can change the frequency on the fly. Here is a knowledgebase that will give you an insight of how you should approach this matter. How Can I Change the Duty Cycle on My Continuous Pulse Train? To find this property node and how to use it refer to the DAQmx .NET reference: Where Can I Find NI-DAQmx Property Node Listings and Help?
I hope it helps
Jaime Hoffiz
National Instruments
Product Expert
Digital Multimeters and LCR Meters

For PCI-4451,How to change the frequency of an output signal without any undefined state

I would like to generate a signal using output channels of PCI-4451 and at the same time capture data using the input channels. Is there any method that I can generate a continuous signal without any undefined state when the signal frequency is being changed?
Attachments:
Input_Signal.bmp ‏729 KB

Wee,
DSA boards such as the PCI-4451 have a number of very desirable properties including high precision and a high sampling rate. The trade-off for the combination of these two properties is that the DSA boards cannot adjust their sampling rate on-the-fly. Instead they have to be stopped and reconfigured. During this reconfiguration time, the value of the board's output becomes flat and level.
If you are looking to adjust the board's output without seeing these flat spots, you have to take a different approach to programming a DSA board. Instead of reconfiguring the board, what you need to do is allow the board to continue to run (at the same output frequency), and then overwrite the output buffer that the board reads to output values. This will
allow you to output new data without the flat spots. Below you will find an example that displays this behavior.
If you determine that this is not an acceptable workaround due to the limitations on output rates, you may want to look at using a Multifunction DAQ board (60xx or 62xx) or an arbitrary waveform generator (54xx) device instead.
Best of luck with your application.
Regards,
Jed R.
Applications Engineer
National Instruments
Attachments:
Cont_Gen_Voltage_Wfm-Int_Clk-With_Updates_for_DSA.llb ‏161 KB

Changing the order of MifDoclet output

Is there a way to change the order of the MIFDoclet output? For example, when the MIFDoclet generates output for a method, it is in the following order (at a high level):
- Declaration
- Description
- Parameters
- Throws
Can I change this so it outputs:
- Description
- Declaration
- Parameters
- Throws
- ...

Any input as to where to start? Is there a single file that defines the order in which output is ordered (if so, what file)? If there are a lot of files that need to be modified, we will just need to go through and figure it out, but any help anyone can give is to get us started in the right direction would be great. Thanks.

How to change the default setting for Output Preview

Good afternoon! I use the Output Preview feature under Advanced > Print Production quite a bit, to preview the rendering in one specific simulation profile (for me, its Web Coated SWOP 2006 Grade 3 Paper).
Is there any way to set the default to be a specific profile, instead of the one that keeps coming up (Output Intent: CGATS TR 001)?
It's very time consuming to have to repeatedly select my profile everytime I open a PDF and gauge the file in Output Preview.
Any help would be greatly appreciated... thanks!
- Johnny

All you need to do is set the default CMYK (under Preferences > Color Management) to the profile you use the most. It will then default to that profile in Output Preview, unless it has an Output Intent specified.

How do I change the margins in Word output?

I'm using RoboHelp 9 as an intermediate format to convert FrameMaker 10 source to old-school 7-bit ASCII text with layout. The whole path is FrameMaker > RoboHelp > Word 2010 > Save as MS-DOS Text with Layout. I have this working with MIF2Go but want to switch it to RoboHelp since that's what the company owns.
The FrameMaker doc's page layout is 8.5" x 11" with .25" margins (8" text column). The text is Courier New 12.
The Word document generated by RoboHelp has 1" margins. Where can I change that?

Have you tried creating your own Word template with the required margins and using this when you generate your Word file from RH? See Peter Grainge's site - http://www.grainge.org/pages/authoring/printing/rh9_printing.htm for details

How can i change the format of output captured footage using DSR-11 in Premiere Pro CS5.5?

Hi.
I am using Premiere Pro CS5.5, capturing footage off a mini-DV casette (NOT HD) using a Sony DSR-11. All is well with that, except for that the output is an .avi rather than MP4 (H264). I am under the impression that H264 with the extension of .MP4, is better than avi.
Does anyone know if it is possible to change the format of that outputted footage?
thanks:)

thanks Ann, Jim. I was afraid u'd say avi is the only option w/capturing, but am happy to hear it is the best option. Thanks again, and to the others who replied (and i will look at the "best export format/codec" page:)

On a NI6534 card, may I change the REQ period when continously outputing data ?

The NI6534 card can continously outputing data by enabling the onboard memory looping mode of NI 6534 devices. In that specific case, is it possible to change the datastream frequency by using the command "DIG_Block_PG_Config (deviceNumber, group, config, reqSource, timebase, reqInterval, externalGate)" without interrupting the dataflow and reload the data to the memory?

Greetings Chris K,
You will not be able to use the DIG_Block_PG_Config function to change the REQ frequency on the fly. You will have stop the pattern output operation, reconfigure the pattern generation, change the REQ frequency, and then restart the operation.
If you are needing to change the frequency of the pattern generation on the fly, another option would be to use an external clock for the pattern output operation. You could use a counter/timer device to generate a clock signal (you can change the frequency of an output signal from a counter/timer on the fly) and use that clock as external clock for your 6534 pattern generation. We have counter/timer devices that I've linked to below.
PCI-6601
http://sine.ni.com/apps/we/nioc.vp?cid=3589〈=
US
I hope this helps.
Regards,
Todd D.
NI Applications Engineer

How can I change the language of a block of text

Hi,
Working in a bilingual environment, I am constantly switching languages as I write e-mail. Using Mail 3.5, if I forget to change the dictionary language before I start writing, Mail logically marks most words as spelled incorrectly. After having written a paragraph, I'd like to be able to change dictionary language, and then continue writing.
But Mail doesn't seem to change the language for the text that was already entered -- the words that were "misspelled" according to the old dictionary language are still underlined in red after the new dictionary is chosen, and after I've told it to "Check document now".
How can I get it to re-evaluate the text as now being in the language of the dictionary, so that all those incorrect red underlines will disappear?
Thanks,
Eric Peters

"It's not a bug or a feature; it's just something you can't do..."
Phooey! I accept that Mail is limited to one language at a time. I don't accept that the spell checking fails to work if I switch which dictionary is in use after having already written some text.
"I know of no email client for Mac than can do it, either."
Er, I hate to say it... MS Entourage does do it, perfectly.
I recently gave up Entourage and switched to Mail, because I decided to stick to all Apple software so that syncing would be smoother. The syncing does work much better now that I've eliminated Entourage from the equation...
...but why can't I switch languages and get the dictionary to evaluate the text in the language I've chosen?! Otherwise, can someone explain to me the meaning of allowing the user to select a new language from the popup in the "Show Spelling and Grammar" dialog, if that new language won't then be used for spell-checking, whether for all the text, or the selected text? What is the purpose of allowing use of an interface control which doesn't then do what it obviously is supposed to do? It seems like Apple has broken its own HIG here.
Thanks for listening... maybe someday it will work as it obviously should!
Eric Peters

Frames on reports (changing the order of printing)

Hi OTN,
I have 2 frames: frame1 and frame2.
I build a report in a way that frame1 appears first and then frame2.
What I want is to inverse the order of the frames(frame2 appears and then frame1) without rebuilding my report.
Thank u in advance

HI THERE
I DONT THINK IT IS POSSIBLE 2 CHANGE THE ORDER OF FRAMES AS SUCH PROBBLY BY LOGICALLY
SOLVING I THINK IT CAN BE WORKED OUT .PLEASE SEND ME THE PROBLEM IN DETAIL

I used to be able to change the output to mono regardless of the input I used. Is this still possible in Garageband 10?

I have several speeches recorded in Garageband. I mistakenly created the tracks as two input tracks, but in reality, they were only mono. Previously in Garageband, one could select the inputs for a track even after it was recorded, thus changing a two input/stereo recording into a mono. Now, I do not see that setting at all. I do see the two circles next to the track title on the track itself, but nowhere does it allow me to make a change. Does anyone know whether I can select the inputs for a track after it has been recorded? The Inspector has many different effects, but I am admittedly overwhelmed by the number of them in this case and have not seen one that permits the kind of adjustment I want to make.
Any ideas? (i would rather not have to do something like input them into iTunes in order to manipulate them which I hear might work but is not what I would call an elegant solution to the problem)

Almost immediately after I asked the question, I tried one more option. I created a new track with only one input. I copied my two input track into it and suddenly it was heard in both channels as if it was a mono recording. It did not make any difference which input I had used to record it originally, I tested adding a track with Input 1 and then Input 2 and both behaved the same way.
I realize there may be other ways to do this. Feel fee to add your input.

Changing the 1-2 stereo outputs to mono in logic

Similar Messages

Maybe you are looking for