Changing the color of a Basic line object nested in a table cell

Can anyone help me out here...I have inserted a line object from the Basic palette into a table cell on my web page and it displays fine but is default black color...I would like to change the color but haven't been successful in doing so..any ideas

Hmm - doesn't sound right.
"color=#hex" is not appropriate HTML markup.... Can you show us where you
made this change?
Murray

Similar Messages

How to change the color of a basic graphic texture?

The basic graphic texture pattern is black by default. I'm looking for a way to change the color of the black lines that create the texture.
I read How do I change the color of Basic Graphic Lines? However, I am unable to select the black pattern lines with the direct selection tool and thus unable to change the color of the lines.
Thanks in advance.

all 14 views are from me refreshing
can anyone recommend a better forum?

How to change the color of circles and lines in Acrobat DC

I'm using the Add Circle and Add Line tools in the Fill & Sign tool set to add markups to a PDF. Is it possible for me to change the color of these tools from the default Black to something else?

Hi kevh,
Currently, there is no way to change the properties for the Add Line and Add Circle tools.
Best,
Sara

First off this is not a problem it inquery into how to change the color of your basic icons so they are easier to recognize among the rest of my icons.

I have used different version of FF before and was not able to change the appearance(to be able tweak it with color or style to fit my personality or mood) of the toolbar icons so I hoped that FF 4 would have added that option although I have not found that to be true as yet or am I not looking in the correct place to find that feature.

Try a different Firefox theme (Tools > Add-ons > Appearance/Themes):
*Firefox 3 theme for Firefox 4: https://addons.mozilla.org/firefox/addon/firefox-3-theme-for-firefox/
*Strata XP: https://addons.mozilla.org/firefox/addon/strata-xp/
*Native XP: https://addons.mozilla.org/firefox/addon/native-xp/

How can i dynamically vary the color of one graph line

I was looking on the developer zone and noticed several people are looking for a way to change the color of one graph line. Simplest case I would like to know: a graph is running, then you press a button and from that point on the color of the graph changes, but doesnt change the old data line color. THis way the line will consist of different colors.
The property node changes the whole line, and the line is always just one color. It should be possible to make the line consist of different color sections, anyone know how?

The application is actually not as slow as it seemed, i had some settings set wrong (anti aliasing in plot, and some functions in advanced, when you right click on the graph)
Especially unchecking the anti-aliasing makes it much faster
Also, just plotting point and not a line, or alternatively, changing the interpolation makes it faster.
Anyway, the attached files do not rely on processor so much anymore, see for yourself
Attachments:
multicolor_looking_plot.vi ‏99 KB
multicolor_looking_plot_2.vi ‏105 KB
multicolor_looking_plot_3_truncated_array.vi ‏99 KB

Change the color of text item after execute query

Dear friends
I would like to know how can I make a tabular form like grid and chang the color of text item when (for exp in emp table) the value of sal column between 2000$ and 4000$.
I used the SE_IEM_PROPERTY command but it change all of the text items of sal column.
please help me
thanks a lot

Highlight the Existing Record in Forms
(Compatible with 4.x, 5.x, 6.x & 9i)
Step 1: Create a New Visual Attribute(BLUE_VA) (Color of highlighted record)
          Font â Arial
          Size â 8
          Style â Plain
          Font width - Normal
          Font Weight - Bold
          Foreground Color â Black
          Background Color â Blue
          Fill Pattern â Transparent
Step 2: Create another Visual Attribute (WHITE_VA) (Default Color of the record)
          Font â Arial
          Size â 8
          Style â Plain
          Font width - Normal
          Font Weight - Bold
Foreground Color â Black
          Background Color â White
          Fill Pattern â Transparent
Step 3: Add Following code to Block-level Trigger WHEN-NEW-RECORD- INSTANCE, POST-BLOCK
(Add to the block, which has these records)
-- Following code will only highlight an item
DISPLAY_ITEM(<block_name>.<item_name>,'BLUE_VA');
-- Following code will highlight complete Record (ref: DISPLAY_ITEM example)
DECLARE
          cur_itm VARCHAR2(80);
          cur_block VARCHAR2(80) := :System.Cursor_Block;
BEGIN
cur_itm := Get_Block_Property( cur_block, FIRST_ITEM );
WHILE ( cur_itm IS NOT NULL ) LOOP
cur_itm := cur_block||'.'||cur_itm;
Display_Item( cur_itm, 'BLUE_VA');
cur_itm := Get_Item_Property( cur_itm, NEXTITEM );
END LOOP;
END;
Step 4: Add Following code to Block-level Trigger PRE-RECORD, PRE-BLOCK
(Add to the block, which has these records)
-- Following code will only highlight an item
DISPLAY_ITEM(<block_name>.<item_name>,'WHITE_VA');
-- Following code will highlight complete Record (ref: DISPLAY_ITEM example)
DECLARE
          cur_itm VARCHAR2(80);
          cur_block VARCHAR2(80) := :System.Cursor_Block;
BEGIN
cur_itm := Get_Block_Property( cur_block, FIRST_ITEM );
WHILE ( cur_itm IS NOT NULL ) LOOP
cur_itm := cur_block||'.'||cur_itm;
Display_Item( cur_itm, 'WHITE_VA');
cur_itm := Get_Item_Property( cur_itm, NEXTITEM );
END LOOP;
END;
I am using the above code in one of my forms and I so far haven't seen any problem

How do I change the color of Basic Graphic Lines?

I used the basic graphic lines in the swatch library - (swatch libraries>patterns>basic graphics>basic graphics lines) to fill a retangle. My question is, can I change the colors of the lines? I have tried everything I know and can't seem to figure it out. Does anyone have any suggestions?

Almost answered - Thank you. The problem I am having is, I was able to drag the swatch onto the artboard and change the colors, but I am not able to drag the new colored one back to the swatch panel. All the swatches in that panel are black and white by default I guess. These are stock swatches. I am working on a PC if that makes a difference. I click the swatch with the selection tool and drag (control>drag?) and I get the little box with the + sign in it when I try to drag, but it bounces back. Any Suggestions. I am a total amature at this program, and am basically self taught.

How can I change the color of a object inside a symbol?

Hello!
I'm working on this study and I need to change the color of an object inside a symbol when I click another object.
The object is called "bola", wich is inside the symbol "ponto" and the clicking object are the colored pencils (each pencil should change the color of the symbol's object, giving the impression you'd selecting a different pencil to draw).
I think it's simple to understand what I mean when you see the files.
I already tried this line on click event of the pencils, but it didn't work:
sym.getSymbol("ponto").$("bola").css("color","#123456");
Anyone knows how to make that work?
I would like to improve the experience of drawing as well. I made it with the "mousedown" event. Is that a better way to get a similar effect?
My files
Thanks a lot,
Clayton F.

Ok here is another sample:
http://www.meschrene.puremadnessproductions.net/Samples/HELP/LapisB/Lapis.html
http://www.meschrene.puremadnessproductions.net/Samples/HELP/LapisB/Lapis.zip
You need to create a var that changes the css background color..
Hopefully you can understand what I did...
The text I left showing so that you could see it change...
I updated the files and all colors should work now.
Message was edited by: ♥Schrene

I can't change the color of an object past a certain point, it returns to original color

Two problems/questions: Opening a file in photoshop cs4 today I noticed that all my folders were labeled as "pass through" (first time seeing this) and when I click the color icon box of an object in the layer pallete, it will not change the color past a certain point. To clarify, I have previously made an object or layer using the pen tool and filled it with a certain purple. Now I want to go back and make it a brighter purple. So I double click the color fill thumbnail in the layer and the color selection window pops up. I click the top right color of the area (which happens to be the brightest color) and press ok, but my object stays as the original color I had made it before. What is the reason for this?
Eric

»Pass Through« indicates that Adjustment Layers will affect lower Layers outside the Group and that contained Layers with different Blend Modes will affect Blending with underlying Layers outside the Group accordingly.
If you change it to Normal or any of the other Blend Modes everything contained within the Group will basically act as one flattened Layer and Adjustments only affect the Group’s pixel content.
Could you post a screenshot of the document with the Solid Color Layer’s Color Picker and the Layers Panel visible?

How do I change the color of an object from a primary color to 2ndary (brown or black)

How would I change an object's color from red to black, I change the color from red to blue using the change to color effect, but for some reason I am unable to change it to brown or black or gray or another basic color

Neither brown or black are secondary colors. Well, brown could be considered a rather desaturated orange...
Anyway, that's neither here nor there.
You can use the Hue/Saturation effect. Help page on it here: After Effects Help | Color Correction effects
You simply pick a channel and adjust the channel range to only select the colors you wish.
Here's a tutorial: http://tv.adobe.com/watch/learn-photoshop-cc/shifting-colors-with-huesaturation/
Going to (or from) white or black is nearly impossible no matter what effect you're using and is not recommended.

When I try change the color of the edge ui only change the color of the top line

Hi,
When I have tried to change the color of the edge field with this command:
$.ui.#textEdit.border.edge.color.value="255,255.255" only change the color of the top line.
Somebody know why?
Thanks
Ruben

I'd like to add i've encountered the same issue. I've found out that you can use the object appearance options to reset the borders to the same properties for all edges and corners. We have custom properties for the border of a field and i needed to set the border to 0mm and back to the default 0.018 mm and our color using the option "edit together". After that, the script to change the border color works for all edges, i suppose it'll work the same for the presence.
Regards,
Marijn Sponselee.

Change the color of the outer line of a shape

Hello I'm trying to create a rectangle with a red border and no inside fill. It's only to highlight some text of a bank form.
I know i have to right click the layer and choose blending options and stroke. But I've tried to change the color so many times and no matter what I do, the outer line remains gray and with rounded corners.
I want the corners of the rectangle to be squared, not rounded but I'm having a hard time changing this.
Please help
I'm using Photoshop CS3
thank you
Could anyone please show a picture of where to change the color of the outer line? I've tried everything.

Hi,
With Ps CS3, you'll probably want to define a Layer Style for a Stroke and then use that with the Square Shape Layers.
This is a Stroke of 4 px, 'Centered' (so a very slight corner rounding on the outside edge. 'Inside' will give you square corners for both inside and outside edges). To change the color of the stroke, go to Layer> Layer Style> Stroke and change the color by clicking on the color bar.
regards,
steve

Changing the Color of an Object in Elements 4.0

Neither of the two methods documented in Elements 4.0 to change the color of an object seem to work on my object. It is a fleur-de-lis that I extracted from a PDF an artist made for me some time ago. It's now black and I want to make it gold. What am I doing wrong?

Harold McDougal wrote:
The first is to select Enhance, Adjust Color, Change Color, select the color to be changed with the eye dropper and the color to change to in the bottom window. Then select okay. Okay. In my case, nothing happens.
The color replacement command doesn't work on pure black or white.
If the design is black over white, try using a solid color fill and one of the lighten blend modes.
How?
Sample the gold color you want and have it as the foreground color chip. Add a solid color adjustment layer over your black and white design. The color should automatically be the foreground color in your tool box. Since should have changed this swatch to the desired shade of gold, it should be gold. Now, for the magic. If you change the blend mode of the solid color fill layer to "lighten", "screen", "linear dodge", or "lighter color", the black will be replaced by your gold.
Note: I'm not sure which if any of the Elements versions includes the "lighter color" blend mode so if you can't find that one...don't panic.

Why can't I change the color of an object?

I am having trouble with the color brick. I can't change the color of an object, at least not like described here: http://http://thedigitalstory.com/2012/12/easily-color-changin.html.
Some background:
1. I am working with RAW files.
2. I have RTFM.
3. I have consulted three books I own on Aperture.
4. I have searched the web for help, which is how I came across the link above.
5. I am using the color block correctly, but I can only achieve a subtle shift in the change of very pale colors. This is despite adding up to three additional color blocks to try to increase the degree of change, but there is no way I am coming close to being able to change a blue car to purple, let alone to red (this references the link above.)
Others must have experienced this, I would think. Any thoughts on what I might do differently to achieve more dramatic results from the color block? I don't even have a specific change in a specific image that I'm asking about—I just want to master the software so that I can do so when I need to. Come to think of it, there is a specific change I want to make in a image. Now it's really an important question!
Thanks,
Ben

Thanks, Léonie. A quick way to move any slider to its extreme is to click on the value in the Value Slider and drag all the way left or right. This is much faster than side-stepping all the way to the far limits.
I think the example the OP (Ben) is trying to emulate is misleading (given the sophistication of the Digital Story poster, deliberately, and wrongly, so). The car in the original photo is just about the only blue object (and thus pixels) in the image used to demonstrate that one can change the hue of objects using Aperture. Aperture excels at global adjustments and adjustments made to _imprecisely_ bounded areas. (This is, contrary to one's expectation, one of Aperture's great strengths: imprecisely-bounded tone and hue shifts are perceived as "natural"; precisely bounded ones look "artificial". Most photographers (as opposed to graphic artists) wish to retain the illusion of a natural world inside their pictures.) The only reason the hue-changing trick works with the car in the photo is that the Color adjustment effects only the car because it is the only blue object in the photo (there is a bluish TV in the background, and a bluish logo on one of the displays in the background).
The point is that while object-specific hue-shifts can be made with Aperture, it is not the program of choice for this kind of editing. A graphics package, which allows for much more control over selecting pixels, is recommended.

How do I darken or change the color of the iCal gray text and lines?

How do I darken or change the color of the iCal gray text and lines? The gray text is very hard to read.

apple dosn't care about us anymore
I remeber way I went back to os x10.6
it's a tiny bit easier to read
gosh I may have to start a boycot of crapple

Changing the color of a Basic line object nested in a table cell

Similar Messages

Maybe you are looking for