Changing the color of hilight it is too light need it darker

my hilighter is too light. I want to darken it on my screen. When I hilight I can't tell if it is hilighted or not.

Go to the Mozilla Add-ons Web Page. There are several add-ons that will change colors for you. You can even make one site have different colors or the same as another site . Also, check out Firefox Options > Content. And select Colors.

Similar Messages

How can I change the color of plot in a waveform chart and graph?

There are 4 plots in a waveform chart, from plot0 to plot3, and I want to chang the color of plots dynamicly up to my needs when the VI is running.
For example, as show in the picture, i want to set the plot0 as RED, and plot1 is BLUE, plot2 is YELLOW, plot3 is GRAY.
If there is only one plot, i can change it's color, however when there are more than one plot, it fail.
How can I do it?
Thanks
Attachments:
waveform.JPG ‏61 KB

Hello MilkyStone,
first you have to set the active plot, then change its color (or other properties). All that is done using property nodes.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to change the color of SAP screen?

Hi Frens,
I know it has nothing to do with SD Community, but still I am asking. Can anyone tell me "How to change the color of SAP screen?" It is needed especially when you are working on System Landscape including PRD, Qua & Dev. There are chances that you end up making a test case in PRD instead of Dev or Qua. To avoid that, different color of SAP screen may be very useful and safe.
Regards
Vikas Chhabra
SD/CIN Consultant

We had a clone of SAP for testing
Only GUIXT solution was available for users to distinguish between real Prod & Clone as SID was same
Created 2 scripts n C:\guixt\scripts
saplsmtr_navigation.e0100.txt
Esession.txt
BOTH having identical code
if V[_ashost=10.3.3.18]
TitlePrefix "CLONE18"
TitleSuffix "(CLONE8)"
endif
if V[_ashost=10.3.3.25]
TitlePrefix "PROD25"
TitleSuffix "(PROD25)"
endif
After much research - this was only solution.
GUIXT will be around; like SAPSCRIPT & SMARTFORMS
despite the enticement of Adobe Forms!
After some time you may set GUIXT profile start window HIDDEN
This you do by clicking profile button of GUIXT menu
If you want to see GUIXT Window again
CMD.exe Dos prompt
cd C:\Program Files\SAP\FrontEnd\SAPgui
guixt visible
Regards
Jayanta Narayan Choudhuri
Kolkata
URL: http://ojnc.byethost11.com

How do i change font sizes and colors in ical in OS Lion. Everything is greyed and too small. And how do I changed the color of the scroll bars, which are now invisible?

how do i change font sizes and colors in ical in OS Lion. Since upgrading, all fonts are grey, instead of black, and too small. And how do I changed the color of the scroll bars, which also are grey and almost invisible? And if you can asnwer this, can you tell me how to get back the email format I had before the upgrade? I no longer have column headings and I'd like them. Thank you.

Do you know about changing the font colors for ical, and the color of the scroll bars?
No, I don't. I don't use that program; I fiddled with it just now, and could not find a way to do that.
Perhaps someone else will have an idea.

How can I always change the color of certain letters?

I know that sounds weird. But hear me out.
I was reading an article about synaesthesia, and it seems that reading with certain letters always displaying in a certain color can do interesting things.
I'm not trying to do anything too crazy, just a little experiment on myself.
So I'm wondering if anybody knows how I may change the color of certain letters on my Mac? I realize that'll make some interfaces look screwy, and in some instances it may not be possible - but is there a way?
Thanks!

Kliegs wrote:
I've never heard of anything like this, so I'm just curious if it exists.
You and me both, let's wait and see what other say. My guess would be that modifications of that type aren't possible w/o some serious "modifications" i.e. hacks, if even via that method, specifically regarding the operating system.

How can I change the color of the new tab button?

Hi,
I was wondering if there was a way to change the color of the new tab button, list all tab button, and tab groups button. I have been searching for personas that don't make it hard to see those particular buttons for days now, but since I can't seem to find any I was hoping there was a way to change those buttons' colors to make them more visible with the personas.
[http://i54.tinypic.com/2ui9351.jpg Here's a picture of the situation]
I want to change those 3 buttons (and the "show more bookmarks" button that appears when the window is too small to show them all) to white or some other more visible color. I know there's a way to change the background of those buttons, but I'd prefer if I could change the '+' button itself in the new tab button for example. Is there any way to do it? Because it's so hard to find personas that don't make it hard to see text or buttons.
Thanks.

jus an example
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
Blinking_Indicator_2003.vi ‏27 KB

How can i change the color of the graph in agreement of the program's condition

Hi,
I am using labview 5.1 in my graduation's project final. (sorry by my english, but i am ina hurry)
How can i change the color of the graph in agreement of the program's condition?
I am developing a VI to control the temperature of termistors,but i have another sensor too.
In a graph i have the situation of the termistors,but i want to change the color of the graph when the sensor is active.
Thanks a lot
Rafael Wajnsztajn - Brasil

To change the color of the line itself, you can use the attribute Plot>>Plot Color.
To change the color of the points, you can use the attribute Cursor>>Cursor Color.
To select the color, you should have a color box constant inside the Numeric>>Additional Numeric Constants palette.
This is all in LV 7.0. I'm not sure how it similar it is in 5.1.
One important thing is to place the attribute node inside a case structure which will execute only when your condition has been filled.
If this didn't help you, I suggest you post the relevant piece of code, or at least an image of it (no BMPs, please).
Try to take over the world!

Is there a way to change the color of a linked eps or ai file in InDesign?

I have a questionaire form that I'm placing in several documents. I need it to be exactly the same in all instances except that it occurs in 4/c on some docs and 1/c (black) on others.
It'd be best to have all the Indesign files link to the same eps (or ai, or eps) file so that I know any change to the text of the linked questionaire will be reflected on all of the InDesign docs. But I don't think InDesign will let me change the color of the text and other filled or stoked elements of eps, ai, or pdf files.
I can change a these in a grayscale tif file. But rasterising the questionaire at a high dpi somewhat defeats the live update feature I'm trying to add here (and bloats my file size).
Could the fact that I can't change the document color mode to grayscale in AI be a factor here?
Thank you for your time!

The only way I can think of is to use a Spot Colour in Illustrator.
You can then place that into InDesign and the Spot Colour should show up in the Swatches Panel.
In InDesign - create a New Swatch and have this be a Spot colour too.
Using the Swatches Panel flyout menu (top right) you can go Ink Manager...
From here you can Map the colour used in Illustrator to the colour you have creaeted in InDesign.
This will replace the colour in InDesign only - and results may vary on output.
You will need to use View>Overprint Preview to view the results.
Hope that helps.

How do I change the color of all the text in a PDF?

Hi.
I have a large PDF, over 1000 pages. Some of the text is highlighted which makes it difficult to see on my preferred document background. In Acrobat XI how do I change the color of all the text in the document back to black please? Although solutions using any other software will be much appreciated too.
I searched this forum already, and the same question was asked back in 2007 when it appears the only solution was to use an expensive third party plugin.
Thanks.

I know of no new solutions since 2007 except the ones you found.
You could use the Accessibility Preferences > Change Document Colors to choose a text color. However, this is an individual preference and cannot be set as a default for others opening the document.

Can you change the color pallet in Logic Pro X?

Hi there,
Is it possible to change the colors on the color pallet in Logic Pro X?
They are too dark for me.
I would appreciate your replies.
Thanks and cheers,
GJ

@ Eriksimon:
Thanks for your help.
Now, I understand that it's a little different. Basically, you can change the values (ranging form 1 to 360) for the 24 upper fields of the Color Palette. (Logic derives the bottom two rows from the top one, making it darker). These values refer to the Hue-color circle. So, you can't change the saturation or lightness ... that's what I was looking for.
Anyhow, I did change some of the values. In this case it starts with 360 ("real" red) for the first region (01), followed by 15 for the second, 30 for the third etc., stretching over the whole spectrum. (The original values range from 14 to 312 only.)
Thanks again for your hints.

Gantt chart- How to change the color of time bars of different versions

Hi All,
My Client wants to see all changes in planning schedule. I made different versions of these changes but he also want to see all these changes in gantt chart and in different colors. I tried to change the color in planning board assistant but in this screen (CJ27/ CJ2B). we cannot view all versions together. And if I use CN41, there I cannot change the colors of time bars.
Secondly, we can change colors of times bars of basic dates, forecast dates and actual dates but there is no provision to change the colors of schedule bars of different project versions. Kindly reply-
1. How to see all project versions in CJ27 or How to customise bar chart in cn41 or if we change in SPRO, then how to change graphic profile in project info profile
2. How to change colors of different time bars of different versions.
3. How to mention these legends (meaning of each color in chart) at footer of gantt chart (in print outs)
Please Help.
Thanks & Regards
Dinesh Chauhan

Thanks,
actually I've created new project planning board profile where planning board assistant is customized but unable to use this profile in CN41. we can change PS info profile in CN41 and that;s why I thought that planning board profile may be assigned somewhere in PS info profile so that changes in planning board assistant will be applied in CN41 through PS info profile. Graphic profile is too complex to understand and not sure if it will help to get colored time bars of projct versions in gantt chart. Still not clear.
Secondly not able to see all versions (snap shots) in gantt chart with different colors of time bars.
I mean planning board screen can be customized but we cannt see different versions here which are possible in CN41, but we cannt customize the gantt chart (time bars) in CN41. Pls help.
Thx & Regards
Dinesh Chauhan

How can we change the color of the image for product display for different

Hi All,
How can we change the color of the image for product display for different colors, to be displayed on site.
jeff

Hi priya,
The requirement that you have stated is not a standard feature in ISA CRM. In order to do the same, you will need to modify the standard ISA code in Java. A common path for the solution would be as follows:
1. Colours
    a. Maintain a text type for Color under the object - PCAT_ITM in Customizing.
    b. Modify the standard search of ISA to search within your new text type as well. (In standard it only searches in Description.
   c. Maintain all shirts colour data in the new type created in step a.
   d. Your requirement will be done!
2. Price
a. Use list prices for your shop and assign the appropriate condition type, acces in your catalog.
b. Modify the standard search of ISA to search on the list prices as well.
c. This too will be done!
3. Accessories - This is very tricky, and will require some exploration. However, here's my opinion,
a. Search for the standard function module, which will return the accessories when provided the product as an input.
b. Modify this function module according to your requirement and ensure that it can be accessed remotely.
c. Modify the JSP as in steps 1b and 2b above to call this new remote-enabled function module.
d. Now you're done!!
The ISA modification part is not so simple, you need a really good guy like "Sateesh Chandra" who'll be able to handle your requirements. This is all I could manage, hope it is some help to you!
Thanks & Regards,
Nelson.

Dynamically changing the color of nodes in a JTree

I have created a JTree and want to dynamically change the color of some of the TreeNodes as my program runs. The JTree is displayed in a JPanel. There is an algorithm built into which identifies the nodes whose color I need to change. No user actions is performed (everythign is internal to the program).
It seems that in the TreeCellRender only kicks in when the tree is first displayed. How do I get it to re-render the tree when the TreeModel changes? It seems that the Listeners are only looking for external user interactions.
Any help would be greatly appreciated.
Thanks!

I think I was a bit too vague in my question. Let me try again...
I have changed an attribute in a node in a JTree. This attribute is changed after the tree was initially rendered, but while the program is still running. I want to tell the TreeCellRenderer to look again at this node since that attribute that was changed will effect how the node should be renderered. I tried using the nodeChanged() method, but it did not work (the colot of the node did not change). Any advise how I can do this?
Thanks!

How do you change the color of the path the pen tool makes?

There must be some way to change the color of the path the pen tool makes from that grey color to something that will contrast with the image underneath. I found one thread about this from 2010 or so and the answer led to a dead link. This seems like it would be a very helpful feature that would be easy to implement. Someone please tell me in 2014, after a zillion version of photoshop have come out in the past 30 or so years, how do we do this? Thank in advance.

Why? When you zoom in too close sometimes it become too pixelated to see what's going on and the point on the pen become to close to each other. Why can't you change the path to a color so that it doesn't blend into the image you're trying to trace? Why is the unchangeable color one of the most likely colors to become invisible on most images? So frustrating!

CLAF - How to just change the color-scheme of default laf of Oracle EBiz

How to change the color scheme of the default oracle ebusiness suites laf?
When we tried the CLAF UI, there is no option to extend the oracle-desktop.xss.
It gives only the base-desktop (which is different from the default Oracle Ebusiness laf).
Have anyone done this ?
Any suggestions/help is appreciated..?

the default LAF is Browser one and the OA personalization guide tells what we can't extend it.
It reads so stupid what i was not able to believe it.. But seems true.
When you need to make a simple modification and keeping the look and feel, you can't.
I changed only one icon but you can't give blaf (even if you modify the extends property in the look and feel metadata.xml
Had you try to copy all blafs styles in your BLAF ? (that could be a workaround even if is it not upgradable ?)
Or, open SR ?
Anyway, I'm interesting by an answer too.
Regards

Changing the color of hilight it is too light need it darker

Similar Messages

Maybe you are looking for