Changing the column wide in CSE in CCM

Hi Experts,
Is there any other way to setup the column wide in CSE in CCM?
Currently we display the long text, but now the end-user needs to scroll to the right to see all the data/info which we don't want.
The options we have are
a) setting it up in such a way that for example only part of the long text is shown. This can be done in BAdI /CCM/CSE_ENRICHMENT
b) or make the long text only visible in detailed screen. But this is not what we want, the end-user must see the data immediately.
So is there any other way to control the column wide in the CSE in CCM?
Thanks in advance.
Kind regards,
Marius Hartman

Hi Marius,
There is no way to modify the column width without modifying the related BSP, this technology is BSP not CCM, CCM has no control over the screens in this case. Perhaps if you wish to find out how to perform this modification then someone in the forums (Basis) will be able to help with the BSP MOD.
Regards,
Jason

Similar Messages

How can i change the column label text in a alv table display

how can i change the column label text in a alv table display??
A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
* declare column, settings, header object
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
get column by specifying column name.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( ' ' ).
My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."
i have checked in debugging and the error occured at the statement :
lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
Thanks,
Suri

I found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
 lr_if_controller TYPE REF TO iwci_salv_wd_table,
 lr_cmdl TYPE REF TO cl_salv_wd_config_table,
 lr_col TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
 elem_year TYPE REF TO if_wd_context_element,
 stru_year TYPE if_alv_layout=>element_importing,
 item_year LIKE stru_year-i_current_year,
 lf_string TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
 EXPORTING
 name = 'IMPORT_NODE-PARAMETER'
 IMPORTING
 value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
 lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
 lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
 lr_column_header = lr_column->get_header( ).
 lr_column_header->set_text( lf_string ).
endif.

Change the column width on the fly

Dear all,
I have a problem, i have a matrix report, the row is "the project name" and the column is "the items" using within each project, and the problem is the items are variable from time to time the report run for each project, so its exceeds the paper width.
And the question is, is there any way to change the width of the column on the fly, i mean dynamiclly change the column width each time the report is called to make all items fit the paper width.
Thank u

i don't think that we can change the layout of the column in reports
The simple solution for that problem is that u have to
fix the horizontal and vertical layout of the text item
better is to post this problem at reports forum
Najeeb

Error while trying to change the Column description in Table Control

Hi,
I have created a table control using the wizard in Module Pool.
When i try to change the column description of the table control or adjust any other element which is already available on the screen and not in table control. It gives me an error
Unable to transfer data. End Program?
Any help would be appreciated.
Thanks
Sarves S V K

Hi.,
Check these [Table Control Change Column Description|Add new columns in table control in custom screen program;
and [Add Columns in Table Control|Re: Table control columns]
else delete and create Table control Again..!!
hope this helps u.,
Thanks & Regards,
Kiran

Changing the column position & width using Screen Variant..

Hi Experts,
    Iam trying to change the column position and width for the standard transaction (eg. FB60 or VA02) using the transaction code SHD0 (Transaction and Screen Variant).
    Iam able to create and save the transaction and screen variant and i could see the check box options for table control like
    a. Auto Column Position
    b. Auto Column Width
     I tried checking and unchecking both the check boxes but iam unable to modify / maintain the column position and width.
     Please guide me in changing the column position and width.
   Thanks in Advance.

Hi Mudit,
Kindly go through this link below:
http://help.sap.com/saphelp_nw04/Helpdata/EN/9f/dbac0b35c111d1829f0000e829fbfe/content.htm
Hope it helps you
Regrds
Mansi

How to change the columns in more than one playlist

I am trying to change the columns in my playlists for all of my audio books. I have over thirty books on my computer with a play list for every cd adding up to over 500 playlists inside of folders for each book. I want to change all of the play lists to have audiobook related columns only. I was wondering if there is any shortcuts besides going into every folder and every playlist and manually changing them all.
What I already know: Changing the view options of a folder containing a playlist or other folder doesn't change the view options of all containing folders and playlists.
Doug's Applescript "Assimilate view options" is for changing all of my playlists to match the view options as the library and I cannot change the library because I have over 1500 album playlists.
If anyone could tell me how to change that I would really appreciate the help

Hi Manish,
There is no need to delete/inactive those entres.
It is the funtionality provided by SAP to store the short texts for catalog in multiple languages.
If you go to QS42 transaction with another language key selected during login. You can find another language short text.
Regards
Amit

How to change the column value upto 68000 rows

Hi,
I want to change the column value.
I have table called RefDoc
Select distinct r.int_ref from refdoc r where r.int_ref like '\\dxb%'
Int_Re__f
\\dxb\Sample\BFE B777\2008\PO2025225.tif
\\dxb\Sample\RO\SFR\26-01-2009j\RO2022098.pdf
\\dxb\Sample\RO\SFR\26-01-2009j\RO2040831.pdf
\\dxb\Sample\BFE B777\2008\PO2025253.tif
\\dxb\Sample\RO\UM INV\26-01-2009\RO2018358.pdf
up to 68000 rows
I want to change to \\AUH instead of \\dxb.
I want the table like
Int_Re__f
\\AUH\Sample\BFE B777\2008\PO2025225.tif
\\AUH\Sample\RO\SFR\26-01-2009j\RO2022098.pdf
\\AUH\Sample\RO\SFR\26-01-2009j\RO2040831.pdf
\\AUH\Sample\BFE B777\2008\PO2025253.tif
\\AUH\Sample\RO\UM INV\26-01-2009\RO2018358.pdf
Thanks
Nihar

user REPLACE function and change it
UPDATE refdoc
SET int_ref = REPLACE(int_ref, '\\dxb\', '\\AUH\')
WHERE int_ref like '\\dxb\%'

How to change the column width in Smartforms..?

Hi All..
I need to change the column width in a smartform.
The requirement has been mentioned as follows...
Adjust the column width of the following columns:
MATERIAL: 14 char
DESCRIPTION: 20 char
How to perform this..??
Where can i find the column width of various columns of a smartform..???
Please Help me...
Regards
Pavan

In the SMART Forms, you would have created a Table object and specified the line width and divided that into no. of columns that you want, you have to mandatorily specify the width of each column so that total of column width will be equal to that of the line width.
When you double click on the Table object, you can TABLE tab on the right side. If you can't see the line / columns details, click on the DETAILS button.
Regards,
Ravi
Note - Please mark all the helpful answers

How to change the column names in display

Hi,
I want to change the columns names and give the display names as more User friendly..
How should I acheive this in WebI reports.
Regards,
BOB

Hi,
the columns names are normal text fields. Just selecdt to edit your report , go to the editor panel and select the column header you want to modify. You can enter the text you want to display
Regards,
Stratos

How to change the column order in the DB?

Hi all,
For example,
     there is an employee database with the field names empno(1),empname(2), empphone(3), empaddress(4), empsal(5). the values in the brackets are the column order i.e., the order in which the column names are placed.
     I have the details of the employee records in a .txt file and i have to upload the file with the same column order with some delimiter. I done it but in future if any one have the details of the employee details with some other column order i.e., empaddress(1), empsal(5), empno(3), empname(4), empphone(5)
     how i can change the column order of the database ...
Thanx in advance...
Bye,

how i can change the column order of the databaseYou don't. You specify the column order in you're insert.
PreparedStatement pstmt = conn.prepareStatement ("insert into EMP (EMPNO, ENAME) values (?, ?)");
pstmt.setInt (1, 1500);
pstmt.setString (2, "A Name");
pstmt.execute ();
Steve.

How to change the column name as bold in adf table

Hi,
How can I change the column name with bolder style and blue colour in adf Table?
I changed the color and font weight in af:column properties, but its effecting the data in that column but not with the column Header Text property.(i have given column name in header text).
can any one have any idea how to do this?
and I have taken panel tabbed layout and in that i'm displaying this table.
but this table has scroll beneath of it to show all columns.
but i want to display all columns (for this, page should have scroll at the bottom side).
how can I achieve this???

Hi,
Add the following CSS Code to the custom skin css file that is to be created as per the suggestions above.
*af|column::column-header-cell{*
color:Blue;
font-weight:bold;
This would ensure that all the table column headers are blue in color and bolder font style through-out the application.
By the way, what version of JDeveloper are you using?
Thanks,
Navaneeth

BSP Changing the Column name

Hi experts,
I have used tableview in BSP . In the output it displays the column name as per the table which i have referred. I want to change the name of the column. How Should i do that.. anyone plz explain me with an example.
Thanks in Advance
Edited by: Vijay Babu Dudla on Apr 28, 2009 12:59 AM

Hi ,
If you want to change the column name, you can put your code following:
<htmlb:tableViewColumn columnName = " "
 *title = " put the cloumn name here"*
 </htmlb:tableViewColumn>
Please try.
Any doubt let me know.
Regards,
Chris Gu
Edited by: Gu Chris on Apr 28, 2009 5:26 AM
Edited by: Gu Chris on Apr 28, 2009 5:26 AM
Edited by: Gu Chris on Apr 28, 2009 5:27 AM

Is it possible to change the column headings when ever i execute the query

in the runtime i want to change the column headings is that is possible.
Ex: if write a timestampadd(.......) function in the table heading is that change the dates automatically whenever i execute the query?
is this is possible?
Product name 1-2-10 5-6-10
aaaa 5 6
bbfff 6 10

Product name 1-2-10 5-6-10
aaaa 5 6
bbfff 6 10It looks like the dates are values in a column? Put that column in the Columns section of the Pivot Table and Product Name in the Rows section and it should produce what you are looking for.
Edited by: David_T on May 19, 2010 2:33 PM

How to change the column header name dynamically based on sysdate

Post Author: senthi_gokul
CA Forum: WebIntelligence Reporting
Dear All,
i have designed some reports. i would like to change the column header dynamically based on sysdate. up to 24 months. can u help me, which add month function using the universe. i dont know if-then-else function is having the universe tool or not?

Post Author: prasingh
CA Forum: WebIntelligence Reporting
Are you saying you are not able to create an object by value (select: statement) as sysdate and put it onto the headers of your report? You can use the add_months() function on the object to add the numbers of months you wish.
Please let me knnow for more.. You can get in touch with me on [email protected] for quick reply.

Changing the Column Header and Hiding the Column dynamically???

Hi friends..
I'm new to OBIEE field. I'm working in a OBIEE project that requires to dynamically change the column header, and dynamically hide the column depending on the prompt value.
I know we can dynamically change the table header using the presentation variable but I couldn't do that same thing with column header.
I searched some forums that suggest to use java script for this purpose but I'm not able to do the same also. If anyone had same issue before please help.

toony, I'm not sure it's possible to do all that you want exactly the way you want, but here are some ideas you can pursue.
To dynamically change column headers without javascript, check this blog out...
http://oraclebizint.wordpress.com/2008/01/25/oracle-bi-ee-101332-dynamic-column-headers-using-presentation-variables-sets-and-conditional-formatting/
As far as dynamically hiding a column, I don't think you can do this, but since you don't provide any details on how the PV is supposed to hide a column based on the value, are you talking about hiding a column for one PV value and another (different) column for a different PV value? Or are you talking about hiding one column when a PV has certain values and displaying it when the PV has a different set of values?
I have managed to create both scenarios via a work-around, but the procedures require some writing so I don't want to put both. Please detail how you want your PV to "hide" a column or columns.
P.S. I don't think column selectors will do the trick for you. Basically column selectors work like this: Say you have a report using Sales Region ID, Region Name, and Sales. Now let's say you want the user to choose if he/she wants to see annual sales, or quarter sales or weekly sales, etc. The column selector view would allow you to put the various columns (Year Sales, Quarter Sales, Weekly Sales) as an option the user can select. Once selected, the sales figure will change for the time period selected. For an example of how this is done, check out the section in this "Oracle by Example" link.
Waited too long to publish this... Madan beat me to it, so there is some overlap here...
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/saw/saw.html
Edited by: LC143 on Oct 27, 2008 9:21 AM

Changing the column wide in CSE in CCM

Similar Messages

Maybe you are looking for